Overlapping of an Select-Option Field and the Extension Button.

Hi,
I have declared a Select-Option as follows:
Tables: agr_define .
select-options: s_role for agr_define-agr_name obligatory
no intervals .
It is not throwing any error.
If I execute this program, On the selection screen, I find one field where I can enter the Role and an extension button to enter multiple roles.
But the F4 help overlaps on the Extension Button and the customer wants this overlapping to be removed, I mean this F4 help button and the Extension button should not overlap with each other.
Can you help me acheive this.
Thanks and Regards,
Ishaq.

Boss,
You cannot avoid that overlapping.
yes, one can change the system screen 1000.
but, in future it will definitely create problems like if you add any extra field and if are using that code in some other server it will never get reflected.So, will you go to Screen 1000 of that server and change the screen attributes again??
okay even i would like to find the answer for that.
If you find the solution, do send me the real answer in this same thread.

Similar Messages

Disable the Select-options field in the viewcontainer

Hi,
I have two select option fields(Date,Number) in a viewcontainer .
Now i need to disable one of the select-option field(Date) in the view container based on the condition.If I give Enability for the view container then both the select options will get diasbled.Is there any way to disable only Date select-option field in the view container.
Thanks in Advance.
Regards,
bala.

Hi,
I just tested this solution and it is working for me....Following on Thomas's suggestion...I did the following....
I just had one select-option on my scr...but it can be done with two too...
step1:
created three attributes at component level under the attribute tab ( as suggested by Thomas )
ENABLE_PRI_SELECTOPTION type WDY_BOOLEAN
M_HANDLER type ref to IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type ref to IWCI_WDR_SELECT_OPTIONS
Note: all are with public check box checked....so that all your views can see these attributes
I created a method at componenet controller leverl: create_select_option....in this method i have following code:
DATA:
lt_range_table TYPE REF TO data,
* rt_range_table TYPE REF TO data,
read_only TYPE abap_bool,
typename TYPE string.
DATA:
lr_componentcontroller TYPE REF TO ig_componentcontroller,
l_ref_cmp_usage TYPE REF TO if_wd_component_usage.
* create the used component
l_ref_cmp_usage = wd_this->wd_cpuse_select_options( ).
IF l_ref_cmp_usage->has_active_component( ) IS INITIAL.
 l_ref_cmp_usage->create_component( ).
ENDIF.
* get a pointer to the interface controller of the select options
*component
wd_this->m_wd_select_options = wd_this->wd_cpifc_select_options( ).
* init the select screen
wd_this->m_handler = wd_this->m_wd_select_options->init_selection_screen( ).
* create a range table that consists of this new data element
lt_range_table = wd_this->m_handler->create_range_table(
i_typename = 'PERSNO' ).
* add a new field to the selection
wd_this->m_handler->add_selection_field(
i_id = 'PERSNO'
I_VALUE_HELP_TYPE = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
I_VALUE_HELP_ID = 'ZHELP_WDA_PERNR'
I_NO_INTERVALS = abap_true
it_result = lt_range_table
i_read_only = wd_this->ENABLE_PRI_SELECTOPTION ). <-----pls see here how i am controlling the read only property
I assume you know this much...already....but i am just putting everything down....
step2:
in my view where i want to display the select-options....i added this code under my wddoinit method
DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
lo_componentcontroller = wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->ENABLE_PRI_SELECTOPTION = abap_false. <--pls see initially we want this field to be open
lo_componentcontroller->create_select_option(
step3:
i did not have much logic to control the select option field so i added a button which if user presses the field become disable...
under that button action method i added the following code:
DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
lo_componentcontroller = wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->ENABLE_PRI_SELECTOPTION = abap_true.
 "<---pls see here how i am changing the global *attribute which Thomas has suggested for controlling the "read only" attibute for the select-option field....you can put this under *your "if" statement....
"this step is very important if you do not remove the field you will get the dump...since it will try to add the same field again
"which produces dump from system....
lo_componentcontroller->m_handler->REMOVE_SELECTION_SCREEN_ITEM(
i_id = 'PERSNO' ).
"now call the same method which we created at component level to create the select_options...
lo_componentcontroller->create_select_option(
that is all....it works great for me.....let us know if still have any questions....
Thanks...
AS...

How to validate a select-option field on the selection- screen

Hi,
   I need to validate a selection-option field in the selection-screen.
Requirement is : i need to read each of customer number one by one and validateCan you please me in achieving this.
Best Regards
Mamatha.B

hi,
chk this sample code.
SELECT-OPTIONS : s_kunnr for kna1-kunnr.
AT SELECTION-SCREEN.
     if 'S_KUNNR-HIGH' = "condition
    "put your required validation here
     endif.
rgds
Anver
Message was edited by:
        Anversha s

Reading from select-options field into the internal table

Hi,
I have to read the low and high ranges from the select-options fields into a field in the internal table in order to update the same field in line item table. since the user may change the screen fields, i need to pass the values directly from the screen and store it in a variable in the internal table. Is there a way to pass both ranges, low and high to one variable which holds the entire range?
Thanks,
Sruthy

Hi,
In the Selection screen you can directly read the field(Select-option)value using read statement as follows:
READ TABLE <SELECT-OPTIONS field name> [using index] INTO <work area>.
After reading you can directly access all the values as follows and can store them in the variables:
var1 = <work area>-LOW
var2 = <work area>-HIGH
var3 = <work area>-SIGN
var4 = <work area>-OPTION
as per your requirement.
I think this will help you.
Kindly reward if helpful.
Regards,
Shakuntala.

Collective search on the Select-options field on the selection screen

Hello experts,
 I have a Y program and a selection screen for it. I have to get the BKPF-BELNR in the search help list. Since the table is too bulky to get all the documents form it. I thought I might need a condition of company code for fetching the documents. I have company code on the selection screen, but if I press F4, on the BELNR, my select-options internal table for company code is remains initial. I think for F4 events the values doesn't get populated in the internal tables, not sure.
 Can you tell me, how to get the company code entered on the selection screen, on the F4 event. Or If this doesn't work, will collective search help solve my problem? If yes, Please let me know, which function module I can use to add a collective search to my select-options on the selection screen.
Thanks,
Ganesh Khumse.
Points will be rewarded!

Hi
do like this
TYPES : BEGIN OF ST_OBJID_SH,
 OTYPE TYPE HRP1000-OTYPE,
 OBJID TYPE HRP1000-OBJID,
 END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
***********SELECTION SCREEN DESIGN***********************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
**********END OF SELECTION SCREEN DESIGN*****************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
 SELECT OTYPE OBJID FROM HRP1000
 INTO TABLE IT_OBJID_SH
 WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
 CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 DDIC_STRUCTURE = ' '
 RETFIELD = 'OBJID'
 PVALKEY = ' '
 DYNPPROG = SY-REPID
 DYNPNR = SY-DYNNR
 DYNPROFIELD = 'S_OBJID'
 STEPL = 0
 WINDOW_TITLE =
 VALUE = ' '
 VALUE_ORG = 'S'
 MULTIPLE_CHOICE = ' '
 DISPLAY = ' '
 CALLBACK_PROGRAM = ' '
 CALLBACK_FORM = ' '
 MARK_TAB =
 IMPORTING
 USER_RESET =
 TABLES
 VALUE_TAB = IT_OBJID_SH
 FIELD_TAB =
 RETURN_TAB = RETURN_TAB
 DYNPFLD_MAPPING =
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDIF.

How to set focus and mark red on certain select option field

hi experts
I embedded a select_option view in my application and tried to use IF_WD_SELECT_OPTIONS->request_focus to set focus on a certain select option field if the logical check failed, and also hope the low field of the select option can be marked red....but things does not happen that way....
could anyone kindly tell me how to implement that requirement?
tkx and regards
sun

What is the problem you are facing in this ?
Requesting focus is easy.
just call the method request focus and pass the id of the parameter whose lower value field you want to focus.
as shown below.
code you might have written in wddoinit
DATA: LT_RANGE_TABLE TYPE REF TO DATA,
        RT_RANGE_TABLE TYPE REF TO DATA,
        READ_ONLY TYPE ABAP_BOOL,
        TYPENAME TYPE STRING.
    DATA: LR_COMPONENTCONTROLLER TYPE REF TO IG_COMPONENTCONTROLLER,
        L_REF_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE.
*   * create the used component
L_REF_CMP_USAGE = WD_THIS->WD_CPUSE_SELECT_OPTIONS( ).
IF L_REF_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) IS INITIAL.
    L_REF_CMP_USAGE->CREATE_COMPONENT( ).
ENDIF.
    WD_THIS->M_WD_SELECT_OPTIONS = WD_THIS->WD_CPIFC_SELECT_OPTIONS( ).
    WD_THIS->M_HANDLER = WD_THIS->M_WD_SELECT_OPTIONS->INIT_SELECTION_SCREEN( ).
LT_RANGE_TABLE = WD_THIS->M_HANDLER->CREATE_RANGE_TABLE( I_TYPENAME = 'ZDEALERID' ).
* * add a new field to the selection
WD_THIS->M_HANDLER->ADD_SELECTION_FIELD( I_ID = 'ID'
IT_RESULT = LT_RANGE_TABLE I_READ_ONLY = READ_ONLY ).
code for focusing a field.
wd_this->m_handler->request_focus( i_id = 'ID' ).
you must have declared attributes m_handler and m_wd_select_options type reffering to IF_WD_SELECT_OPTIONS and
IWCI_WDR_SELECT_OPTIONS respectively.
and regarding that red color i am not sure it is possible without using message manager.
thanks
sarbjeet

How to write in selection screen after the select option field?

Hi
Please help me with this...
i need to write format of date after the select option field in the selection screen.
its like..
date ___________ to ___________ yyyymmdd
points will be awarded..
thanx

Use selection-screen comment 1(31) text-005 -> this will give you format option.
See the below sysntax ,you have to use like this
Selection-screen begin of block b2 with frame title text-002.
selection-screen begin of line.
selection-screen comment 1(31) text-004.
parameter: r_1 radiobutton group rad1.
selection-screen end of line.
selection-screen begin of line.
Aging Report
selection-screen comment 1(31) text-005.
parameter: r_2 radiobutton group rad1.
selection-screen comment 40(30) text-003.
parameter: p_expir as checkbox.
selection-screen end of line.
selection-screen begin of line.
Materials with no Expiry Date
selection-screen comment 1(31) text-006.
parameter: r_3 radiobutton group rad1.
selection-screen comment 40(30) text-007.
parameter : p_bin as checkbox ."default 'X'.
selection-screen end of line.
selection-screen end of block b2.
selection-screen end of block b0.

Assign return itab to select options field

Hi Dear Experts,
I am not be able to pass "r_pobjid" to a select-options field
clearly as desired as well.
As already mentioned r_pobjid must be presented to a
select options field after the user has made his selections.
Can you pls give me deciding hint to solve the problem.
This below demonstrated solution doesn't work.
Regards
CALL FUNCTION 'RP_PNP_ORGSTRUCTURE'
TABLES
pobjid = r_pobjid.
p_orgeh-high = r_pobjid.
p_orgeh-sign = 'I'.
p_orgeh-option = 'EQ'.
APPEND p_orgeh.

I think you need pass
Loop at r_pobjid
1).
p_orgeh-low = r_pobjid.
p_orgeh-high = r_pobjid.
p_orgeh-sign = 'I'.
p_orgeh-option = 'BT'.
APPEND p_orgeh.
2). or
p_orgeh-low = r_pobjid.
p_orgeh-sign = 'I'.
p_orgeh-option = 'EQ'.
APPEND p_orgeh.
endloop.
a®

How to hide the select-options fields on radiobutton select in webdynpro

hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement below

Hi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k

How can i used pai in screen 1000 to change the select-options field?

hi,all.
I want used pai to change the select-options field,but it can't works.
the mainly code is:
REPORT ZTEST99.
TABLES :MARA,MAKT,MARC.
SELECTION-SCREEN BEGIN OF BLOCK B0 WITH FRAME TITLE TITLE0 .
select-options:s_matnr for mara-matnr,
               s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF BLOCK B0.
parameters:p_flag as checkbox.
at selection-screen OUTPUT.
   LOOP AT SCREEN.
   IF P_FLAG = 'X' .
   IF screen-group1 = 'ID1'.
         screen-input = '0'.
    ELSE.
      screen-input = '1'.
    ENDIF.
    MODIFY SCREEN.
ENDIF.
    ENDLOOP.
START-OF-SELECTION.
CALL SCREEN 1000.
when i click p_flag,then i want to change s_werks from OBLIGATORY to no OBLIGATORY.
how can i realized?
Thanks for all.
Sun

Hi ,
change your code like this.
Change in your code:
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : s_matnr for mara-matnr,
s_werks for marc-werks MODIF ID ID1.
SELECTION-SCREEN END OF SCREEN 100 .
At selection-screen.
if sy-dynnr = '100'.
IF P_FLAG = 'X' .
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = '0'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
else.
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-required = 1.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
my code :
REPORT Z50871_SELECTOPS_DYNAMIC.
PARAMETERS : CH_EBELN AS CHECKBOX,
             CH_VBELN AS CHECKBOX.
DATA: V_EBELN TYPE EKKO-EBELN,
      V_VBELN TYPE VBAK-VBELN.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : EBELN FOR V_EBELN MODIF ID G1,
                 VBELN FOR V_VBELN MODIF ID G2.
SELECTION-SCREEN END OF SCREEN 100 .
AT SELECTION-SCREEN OUTPUT.
IF SY-DYNNR = 100.
    IF CH_EBELN = 'X' AND
       CH_VBELN = ''.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G1'.
          SCREEN-ACTIVE = '1'.
        ELSE.
          SCREEN-ACTIVE = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ELSEIF CH_VBELN = 'X' AND
       CH_EBELN = '' .
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G2'.
          SCREEN-ACTIVE = '1'.
        ELSE.
          SCREEN-ACTIVE = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ELSEIF CH_EBELN = 'X' AND CH_VBELN = 'X'.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 EQ 'G1'
           OR SCREEN-GROUP1 EQ 'G2' .
          SCREEN-ACTIVE = '1'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF SY-DYNNR = 1000.
IF CH_EBELN = 'X' OR CH_VBELN = 'X'.
    CALL SELECTION-SCREEN 100.
ELSE.
    MESSAGE I000(Z50871MSG) WITH 'Please select atleast one checkbox'.
ENDIF.
ENDIF.
regards
Sandeep Reddy

How to change the select-options fields length to long

Dear friends:
   I had develop a program for sent email,and it have a field for fill mail address as below:
   data: lmail like adr6-smtp_addr.
   select-options: mailadd for lmail no intervals.
   my customer complain that the field is too short,but I can not change it to longer,the select-options component limit the visible length , how can i do for this problem!

Dear All:
I had realized this function.
I defined a parameter and a pushbutton to replace the select-option componet,
the code share as below.
data: lmail like adr6-smtp_addr.
SELECTION-SCREEN BEGIN OF LINE.
parameters: mailCopy like lmail.
selection-screen:pushbutton 64(5) pubu user-command mailButt.
SELECTION-SCREEN END OF LINE.
select-options: mailadd for lmail NO INTERVALS no-display.
at selection-screen output.
CLEAR l_count.
DESCRIBE TABLE mailadd LINES l_count.
IF l_count > 1.
    write ICON_DISPLAY_MORE as icon to pubu.
ELSE.
    write ICON_ENTER_MORE as icon to pubu.
ENDIF.
at selection-screen.
CLEAR l_count.
DESCRIBE TABLE mailadd LINES l_count.
IF NOT mailCopy IS INITIAL AND mailadd[] IS INITIAL.
    MailAdd-low = mailCopy.
    Append mailadd.
ENDIF.
IF l_count = 1 and mailCopy IS INITIAL.
    refresh mailadd.
    clear mailadd.
endif.
if sy-ucomm = 'MAILBUTT'.
    perform show_box.
endif.
*       FORM show_box                                                 *
FORM show_box.
TYPE-POOLS aqadh .
DATA: tab_and_field TYPE rstabfield.
tab_and_field-tablename = 'ADR6'.
tab_and_field-fieldname = 'SMTP_ADDR'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
       EXPORTING
            TEXT           = 'SET E-Mail To '
            tab_and_field = tab_and_field
       TABLES
            range          = MAILADD
       EXCEPTIONS
            no_range_tab   = 1
            cancelled      = 2
            internal_error = 3
            OTHERS         = 4.
IF NOT MAILADD[] IS INITIAL.
    READ TABLE MAILADD INDEX 1.
    MAILCopy = MAILADD-LOW.
ELSE.
    CLEAR MAILCopy.
ENDIF.
ENDFORM.

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Initializu00EDng select options field with default values and with NO INTERVALS

Dear All,
I have used WDR_SELECT_OPTIONS technology within WD Abap.
I also have added the fields which have to be taken into consideration.
lt_range_table =
wd_this->m_handler->create_range_table(
i_typename = 'PLANT' ).
wd_this->m_handler->add_selection_field(
i_id = 'PLANT'
it_result = lt_range_table
i_read_only = read_only ).
Can I assign two values to this field 'PLANT' whereby the user may take only these values.
I mean kind of pre initializíng of this select options field with default values.
Due to this handling it should be prevented that the user can give other values
except this values.
Additonally it should be fine whether it is possible to disable the second input field
of this select options field like NO INTERVALS .
Regard
sas
Regard
sas

wd_this->m_handler->add_selection_field(
i_id = 'PLANT'
it_result = lt_range_table
I_NO_INTERVALS = 'X'
i_read_only = read_only ).
Pls check 'WDR_TEST_SELECT_OPTIONS' web dynpro component

Call Transaction and fill a select-options field with more than one value?

Hello everybody,
how can I fill a select-options field with more than one value.
Here is the code example:
CLEAR: GT_BDCDATA, GS_BDCDATA.
GS_BDCDATA-program = 'RHALEINI'.
GS_BDCDATA-DYNPRO = '1000'.
GS_BDCDATA-DYNBEGIN = 'X'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
GS_BDCDATA-FNAM = 'PCHOTYPE'.
GS_BDCDATA-FVAL = 'P'.
APPEND GS_BDCDATA TO GT_BDCDATA.
CLEAR: GS_BDCDATA.
LOOP AT gt_hrobjinfty INTO gs_hrobjinfty.
    GS_BDCDATA-FNAM = 'PCHOBJID-LOW'.
    GS_BDCDATA-FVAL = gs_hrobjinfty-objid.
    APPEND GS_BDCDATA TO GT_BDCDATA.
    CLEAR: GS_BDCDATA.
ENDLOOP.
CALL TRANSACTION 'PFAL' USING GT_BDCDATA MODE 'A'
                   MESSAGES INTO GT_MESSAGES.
THX.

Hi,
Please refer the code below:
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
* load each personnel number accessed from the structure into
* parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
Thanks,
Sriram Ponna.

Error while using selection option variable in the selection screen

Hi All,
I am facing an issue while using selection option variable in the selection screen for one of my reports.
Scenario: For the field "Region From" we need to have wild card logic () in tes selection screen, for example if we put "BE" in the selection screen for the field Region From then the query should be executed only for those "Region From" values which begin from "BE".
Approach: For the above requirement I have made a selection option variable for "Region From". This allows use wild card
But when the report is executed we get the following error:
"System error in program CL_RSR_REQUEST. Invalid filter on ETVRGNFR".
(ETVRGNFR is technical name of the info object Region From)
Though the report is executed it displays all the values for the field "Region From" irrespective of the selection given in the selection screen.
Please give suggestions / alternate solutions to crack this issue.
Thanks in advance
Regards
Priyanka.

Hi,
Try to use a variable of type Customer Exit and do the validation inside the exit to display according to your request.
This is just my view, i am not sure if u are already using this or Char. Variable.
Cheers.
Ranga.

Overlapping of an Select-Option Field and the Extension Button.

Similar Messages

Maybe you are looking for