Overlapping of TLN - Level 2
Hello,
The attached screen shot TLN_2.jpg shows the overlap of 2nd level of TLN in Firefox . In IE or chrome there are no overlaps.
The overlap disappears when i adjust the height from 38px to 50px in Div of the Main table ie TLN via developer tools.
I tried changing the height property in Theme for the main table as well as second level table but it deosnt reflect in Firefox.
Please let me know how can i achieve it.
Thanks,
Glory
Hi Glory,
Since I can't see the code and CSS I can't really know what's the actual problem.
Are you using position absolute or relative there?
if not maybe your margin/padding is incorrect?
BR,
Saar
Similar Messages
-
ESS worksets not visible in second level navigation
Hi all,
I installed ESS 600 sp08 on EP 7.0. I dint changed anything.The ESS worksets should be visible in the second level navigation .But in my case they are not visible in the second level navigation.They are visible in the detailed navigation.
What can be the reason for this?I want the ESS worksets to be visible in second level navigation.
Any clues please.
Thanx and regards,
rajeshHi
As posted above, this could be an issue with TLN level. To reset TLN level, check out this [link|http://help.sap.com/saphelp_nw70/helpdata/EN/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm].
Regards
Prabhakar -
Javascript error in TLN=1
Hi everybody, i'm working in EP SP13; i put TLN = 1 in the way the documentation says.
Now (sometime) i get a strange javascript error during the navigation in the portal: it says "object required" on row 777.
When i get this error i'm not able to navigate anymore in the portal, it always remains in the home page.
The problem gets solved when i put TLN=2 again.
What could be the cause of this behaviour?
Thanks in advance.Hi Pier,
You should change number of TLN levels in <b>two</b> places:
1. <b>In the TLN iView</b> - the property <i>Number of Display Levels</i>.
2. <b>In the Desktop Innerpage (inside the framework page)</b> - the property <i>Number of Display Levels in TLN</i>.
Hope that helps,
Yoav. -
Displaying detailed TLN in anonymous page
Dear All,
I want to display the detailed navigation list which starts from level 1 itself and which should not refer to the TLN.
what i mean is anonymous page wont be having TLN but i need DTLN there which is not getting reflected because it takes certain values from TLN .
Is there any way around to navigate without using TLN and directly using DTLN.
Thankshi Gunjan,
Michael is correct. If you set TLN level as 0, it removes TLN from your default framework page.
1. In the Portal Catalog choose Portal Users ->Standard Portal Users. This folder contains the Default Framework Page.
2. Right-click Default Framework Page and choose Open -> Object.
3. From the Page Content List select the Top-Level Navigation iView and click Properties.
4. Scroll to the Number of Display Levels property and enter the value 0, 1, or 2, depending on how many navigation levels, if any, you want for top-level navigation.
<b>Choosing 0 removes your top-level navigation and displays your navigation structure in the Detailed Navigation iView</b>.
5. Click Save.
Regards,
Ganesh N -
Hi All,
We had a requirement to change the standard theme.
We made changes in the standard par files like
1.Masthead par file : To include Tool area along with the Masthead.And from Theme Editor ,we have set only Welcome area and Function Area visible .
2.Top Level Navigation : To add image at the left side of the TLN levels.
3.Page tool bar: To include image at the left side and Replace the text like "History,Back ,Forward" with Images
Everything works fine with IE6.0.When we open same with Firefox, it looks scattered.There lies problem with Masthead,TLN and Detailed Navigation
But the stanrdard portal looks fine with firefox.
I want to know why the custom themes not supported by firefox and what all features not supported by firefox.
Regards
AkshayaAkshay,
I guess FF 3.0 is not supported.
Check this document for EP 7.0
https://websmp106.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200615320900001250&00200682500000003818=WBRPFM&00200682500000003853=Enterprise%20Portal
Good Luck!
Sandeep Tudumu -
Reg shifting field in Adobe Forms
Hi All-
I am working on Adobe.I have a requirement that at top I will have a table and after that some text will come.
when i am fixing position of downword Text and the no of rows increasing in Table,its overlap on lower level data.
plese provide me solution for that.
Thanks-
AshutoshAs stated above, you will have to implement subforms. this can get a little tricky if you have content you want positioned on a form along side flowed content.
Generally, my PDF is a combination of positioned and flowed subforms because when you make a subform flowed, it will squish your fields/data all together.
There are 2 types of flowing forms - western text and top to bottom. Top to Bottom will squeeze your fields right underneath each other.
Western Text will wrap your fields from left to right.
If you go this route, a tip is to make use of spacing options in your Layout to force space between your fields. -
Mono a1,a2 instead of stereo a1+a2
My FCP project has its sound in two separate mono channels a1 and a2 (in Viewer tabs). When I close the mono tab, a stereo tab appears but it carries no signal. Now I cannot treat the two channels both at the same time in raising and lowering gain (with the pen tool). How can I combine these two to act as a stereo pair?
Hans van der MeerTo create a stereo pair:
1 Select a pair of mono audio clip items in the Timeline. (Use the Command key to select the second item, if necessary.) If you click one item of a linked pair, the other item is also selected.
2 Choose Modify > Stereo Pair (or press Option-L).
The stereo pair indicators appear on the selected clip items in the Timeline.
If the clip items you want to make into a stereo pair have different durations, the clip items are trimmed to the region where they both overlap. The levels, pan settings, and filters that were applied to the top clip are applied to both, and the clip attributes from the bottom clip are ignored.
+Source: Final Cut Pro User Manual+ -
How do I link audio in the timeline?
My source audio is stereo mix but in the timeline each track is represented as if it were mono. It's just a bit annoying since every time I add an effect to one track I have to do it do the other. Is there a way to link the audio? What caused the audio to get unlinked in the first place?
To create a stereo pair:
1 Select a pair of mono audio clip items in the Timeline. (Use the Command key to select the second item, if necessary.) If you click one item of a linked pair, the other item is also selected.
2 Choose Modify > Stereo Pair (or press Option-L).
The stereo pair indicators appear on the selected clip items in the Timeline.
If the clip items you want to make into a stereo pair have different durations, the clip items are trimmed to the region where they both overlap. The levels, pan settings, and filters that were applied to the top clip are applied to both, and the clip attributes from the bottom clip are ignored.
+Source: Final Cut Pro User Manual+
What caused the audio to get unlinked in the first place?
Make sure the button for stereo pair is active in Log & Capture's Clip Settings:
Message was edited by: Nick Holmes -
Hi Friends,
We are facing problem in Capacity levelling and evaluation.
We have make to order scenario in process industry.
We have five material haveing one material characteristic in common that is "Shade".
We execute the MRP and system is generating 5 different plan order.
In the receipe for the above plan order's , there is one resource ( Dyeing Vessels ) common in which all the above plan order will be processed at a single time.
Capacity for this common workcenter ( Dyeing Vessels ) to process all the above material at a time is say 8 Hrs.
But in capacity evaluation/levelling , it show ( 8 Hrs x 5 plan order ) = 40 Hrs. But the actual capacity is just 8 Hrs only.
Is there any way to group all the above capacity at material level ? Or some other solution so that we have capacity utilization of 8 Hrs rather than 40 Hrs.
Regards ,
UpendraDear ,
Total available caapcity of any resource or work centre will be basically
Standrad Available caapcity ( End time -break time -start time ) * Capacity Utilisation of the resource (less than 100% or 90-95% based on the work centre periodic usage at the floor )*No of Individul Capacity
As you are in pricess industry , then you must have resource which is working 24 hrs with Utlisation of 90-100 % with out any break , then you hav available caapcity of 22-23 hrs .Or 8 hrs per shift so total 24 hrs .
In that context , you can dispath all the planned order in CM21 based on the available capaty and scheduling .
If the Planned orders are having same master recipe , then you can check the Overalpping Required functinality in Master Recipe as like Routing in discrete .
Check my posting on this theard : Orders Overlap in capacity levelling
Regards
JH
Edited by: Jiaul Haque on Nov 10, 2010 1:50 PM -
Hi,
I have downloaded the TLN par file from portal. But i am not able to find the JSP under portal inf-->jsp folder. Where is the location of the JSP.
I had gone through some blogs which explain implementing N-level TLN. Anyone had a working code for this?
Thanks in advance.Hi Jyothi,
This is only possible through custom coding. The below discussions may help you,
[TLN 3rd level Navigation]
[How to add Navigation Level to the Portal?]
Cheers!!!
Biroj Patro. -
Hi,
I have downloaded the TLN par file from portal. But i am not able to find the JSP under portal inf-->jsp folder. Where is the location of the JSP.
I had gone through some blogs which explain implementing N-level TLN. Anyone had a working code for this?
Thanks in advance.Hi Jyothi,
This is only possible through custom coding. The below discussions may help you,
[TLN 3rd level Navigation]
[How to add Navigation Level to the Portal?]
Cheers!!!
Biroj Patro. -
Hi all,
I have to customize the TLN, to a 3 level pattern.
There are lot of blogs on 2 level but nothing is found for 3 levels.
Please help me in this if somebody has already achieved this requirement.
How can i change the source TLN that the TLN will be with 3 levels?
regards
YossiHi Yossi,
try to program this using the navigation taglibs.
You can create a navigation including the CSS you want.
Check for Blogs from "Sven Kannengiesser"
Regards,
Kai -
Error while creating N-level TLN
Hi,
I created the SimpleNLevelNavigation iView by using the par created as per the instructions given in SDN community.
But when i try to run/preview the iView i am getting the following error,
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/SimpleNLevelNavigation/frameworkpage/com.sap.portal.innerpage/NlevelNavigation
Component Name : SimpleNLevelNavigation.SimpleNLevelNavigation
Error in parsing taglib 'NavigationTagLibrary' tag in web.xml or .tld file of the taglib library..
Exception id: 03:00_29/04/06_0034
See the details for the exception ID in the log file
Kindly loo into the issue and help me out.
Thanks in advance, good responses will be aptly rewarded.
Guru.Hi Daniel,
Thanks for the reply.
Basically i want to customise the TLN bar. I want to have the first level and second level navigations in some other format compared to the standard SAP look and feel. Please suggest me for that what should i do?
I am using ep6 sp2.
My jsp's starting declarations are as follows;
<%@ page import = "com.sapportals.portal.navigation.*" %>
<%@ page import = "com.sapportals.portal.prt.resource.IResource" %>
<%@ page import = "com.sapportals.portal.prt.runtime.PortalRuntime" %>
<%@ page import = "com.sapportals.portal.navigation.INavigationGenerator" %>
<%@ page import = "com.sapportals.portal.prt.component.IPortalComponentRequest" %>
<%@ taglib uri="NavigationTagLibrary" prefix="nav" %>
My portalapp.xml file looks like this -
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
<property name="Vendor" value="sap.com"/>
<property name="SecurityArea" value="NetWeaver.Portal"/>
<property name="SharingReference" value="com.sap.portal.navigation.navigationtaglibrary"/>
<property name="PrivateSharingReference" value="com.sap.portal.htmlb"/>
</application-config>
<components>
<component name="SimpleNLevelNavigation">
<component-config>
<property name="SafetyLevel" value="no_safety"/>
<property name="EPCFLevel" value="0"/>
<property name="SecurityZone" value="com.sap.portal/no_safety"/>
<property name="ClassName" value="com.sap.portal.navigation.navigationtaglibrary.nlevelnavigation.SimpleNLevelNavigation"/>
</component-config>
<component-profile>
<property name="NavigationTagLibrary" value="/SERVICE/com.sap.portal.navigation.navigationtaglibrary/taglib/TagLibrary.tld"/>
<property name="com.sap.portal.navigation.nlevelnavigation.depthLevel" value="3">
<property name="plainDescription" value="Inner recursion depth level:"/>
<property name="longDescription" value="Specifies the navigation hierarchy depthLevel from which the navigation tree displays its entries"/>
<property name="category" value="Navigation"/>
</property>
</component-profile>
</component>
</components>
<services/>
</application>
Thanks in advance,
Guru. -
Hi,
If the TLN is configured to show only one level and DTN to start from the second level, the first time a user enter on the portal, the first node of TLN is not select.
What could be the problem?
Version:
6.0.2.2.4
Thanks and Regards,
JohnHi John,
Do you have any sort priorities set up on pages, or iviews?
Paul -
TLN hover menu enabled - can't select 1st level node
Hi,
I've enabled the hover menu for TLN, but now I can't select a 1st level node, only 2nd level ones. When I click on something on the first level, it just ignores it.
Is this how it's supposed to behave, and can I change it?
Many thanks
JaneSAP have said this is how it is meant to work, but in some cases it makes the TLN harder to use.
How would I go able making the first-level tabs act the same way in the hover menu as they do normally?
Any help would be greatly appreciated!
Regards
Jane
Maybe you are looking for
-
Audio playback or RAM preview is scrambled or jumps around in After Effects CS5 or Premiere Pro CS5
http://kb2.adobe.com/cps/851/cpsid_85192.html Are there any news on this? When can we expect the update/bug-fix? This is really a major bug for me, cause I'm dealing with lots of old projects totally relying on aiff-files. I really don't want to conv
-
Fields which are possible 4 change in a service entry sheet after approval
Dear Guru's, I find that after a service entry sheet is approved (automatic GR is done at this stage as well), there is not even 1 field which can be changed. Is there a way to make some fields changeable without going through the reversal process or
-
Classic 'Flatten PDF' question
So I have created a fairly complex fillable form in Acrobat Pro (10.1.8)... I have saved it for use by other users in Adobe Reader. (File>Save As>Reader Extended PDF>Enable Additional Features...) The users can open file in Adobe Reader just fine, al
-
Where is the Oracle WSRP producer?
Hi, I am looking for the Oracle WSRP producer located at http://portalstandards.oracle.com/wsrp/jaxrpc?WSDL before. But the URL does not exist now. Could anybody let me know the producer? In fact I saw those remote portlets on http://portalstandards.
-
Cache Management: Firefox does not behave as expected when setting cache preferences
I presently play a game online and override my cache management. I Set in the preferences the following parameters. browser.cache.disk.max_entry_size = 2000: browser.cache.disk.smart_size.enabled = false However, when I check the properties of the ca