Overlapping requests not deleted from Infocube

Hi gurus,
I have included a delete overlapping requests process as the final step in one of my process chain.
I am using the infopackage selection options to delete the request, but it appears not to be working, the log chain gives OK status, but requests are not deleted. Am I missing any step???
We are using BI 7.0.
Thank you.

Have you enabled deletion ?
In planning view just double click on "Delete overlapping request" variant.
At top you should see your infopackage or DTP.
At bottom you have "Deletion Selections" here check here if you have ticked "Delete Existing requests" and chosen overlapping or same or more comprehensive.
Hope this helps.

Similar Messages

  • Request Got Deleted From 0PP_C01(Planned/Actual Comparison Order/Material)

    Hi experts,
    I am a newbie in the BW area.
    We have 0PP_C01(Planned/Actual Comparison Order/Material View) , 0PP_C03(Plan/Actual Comparison Operation/Work Center View) and 0PP_C05(Plan/Actual Comparison Material Consumption) activated in our production system.
    Few days before one data error happened during data load and accidentially, that particular request got deleted from the system.
    When we tried to load data again, it is not allowing since the request is missing and the update mode is delta update.
    Can any one guide me to retrieve the data back to the system??
    Thanks alot in advance
    Shobin

    Hi,
    You can try using PSA if that request it's still there.
    Otherwise, you will need to regenerate that request in source system (by filling setup tables with parameters) and update BW with a full load.
    Hope this helps.
    Regards,
    Diego

  • Trash will not delete from trash folder! What can cause this effect?

    Trash will not delete from trash folder! What can cause this effect?

    u can actually force it to delete, oviously i assume you dont have the application or data etc open neware else?
    try restarting your computer, go into finder close all your open applications etc, servers, **** even clear your data in your web browser, do a disk utility check and verify your drives and repair em if nessicary.
    as chamar suggested look at http://www.thexlab.com/faqs/trash.html
    i had the same problem before but with a good 5-10 minutes of googling i was able to solve it..
    best of luck

  • Could not delete from specified table?

    hi all,
    i'm getting this error could not delete from specified table when i execute a delete on dbf file via JDBC-ODBC bridge, when i execute an update table command i get operation must use an updatable query, but i'm not updating the query returned from select statement.
    Does anyone have similar problem before??

    Hi,
    my code is below:
    try {     
    conn=DriverManager.getConnectio("jdbc:odbc:sui","","");
    stmt = conn.createStatement();     
    int r= stmt.executeUpdate("Update Alarms set ACK=True WHERE DT = { d '" + msgdate + "' } AND TM= '" + msgtime + "'");
    System.out.println(r+" records updated in Alarms ");
    stmt.close();
    conn.close();
    stmt=null;
    conn=null;
    catch (NullPointerException e) {System.out.println(e.getMessage());}
    catch (SQLException e) {System.out.println(e.getMessage());}
    I have an ODBC datasource called sui and a table called alarms, i need to write into the column Ack to true when DT equals msgdate and TM equals msgtime, the error returned is Operation must use an updatable query.
    I believe the SQL has no problem because there is no SQL syntax error and i'm not updating any resultset returned from select query.
    When i delete, i get could not delete from specified table. Anyone has any idea wh'at's wrong?

  • Please help! My Itunes says corrupt file and will not open (IMac 2010). I couldn't fix it by reinstalling so I moved it to trash. It will not delete from my trash as it is saying "Japanese.lproj" is in use. I can't delete or open to close it, what do I do

    Please help!
    My Itunes says there is a corrupt file and will not open (IMac 2010). I couldn't fix it by reinstalling ITunes so I moved ITunes to trash. It will not delete from my trash as it is saying "Japanese.lproj" is in use. I have never opened or used "Japanese.lproj". I can't delete ITunes or open ITunes to close the Japanese.lproj, what do I do? Thank you for any help you can provide..

    It will not delete from my trash as it is saying "Japanese.lproj" is in use. I have never opened or used "Japanese.lproj".
    Interesting. This sort of thing is more common on Windows systems. Taken at face value, one of the iTunes program files (one of the Japanese language resources) is damaged.
    I'd try running your Disk Utility over your startup disk. Does it find/repair any damage? If so can you empty your trash and reinstall your iTunes successfully now?

  • Photo albums not deleting from my iphone 6

    Photo albums not deleting from my iphone 6 even after i remove them from itunes. plus it shows as others in the storage. how to remove the albums ? i removed them from the itunes linked folders though it still shows on the iphone !!!

    If they were placed on the phone using iTunes sync, the following from iTunes: Syncing photos has instructions on how to remove them. If that doesn't work it is usually because they were added from another computer. Many have reported success by first adding one or two new photos to the phone via iTunes sync using the instructions in the above link and then syncing again using the delete instructions below.
    To delete synced photos and videos from your device
    In iTunes, click the Device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper-right corner first.)
    Click the Photos tab in the resulting window.
    Choose "Selected albums" and deselect the albums or collections you want to delete.
    Note: To delete all synced photos, deselect "Sync Photos from" and, when asked, click "Remove photos."
    Click Apply.

  • Persistent messages are not deleted from JMS store

              Hi,
              I'm experiencing some unexperienced JMS store behaviour with WLS 6.1 sp 4. I have
              a servlet that posts a message to persistent JMS queue, which will be eventually
              consumed by an MDB. Even though consumption is successful, the message is not
              deleted from JMS store.
              The message will be redelivered after server restart and is still not deleted
              from JMS store. I verified this using file store and JDBC store. The messages
              actually stay in the JMSSTORE table till doom's day.
              I couldn't reproduce the case with WLS 6.1 sp 3. Exactly the application code
              was used in all cases.
              Subsequently I ran the same case with various ServerDebug DebugJMSXXX-flags set,
              and discovered that WLS 6.1 sp3 logs 'asyncDeleteL' and 'ZZZDelete' for the consumed
              message. WLS 6.1 sp4 didn't log this information.
              I'm running WLS 6.1 on WinNT and Win2000.
              Comments?
              b r
              Juha Räsänen
              

    I've am having exactly this problem with wl 5.1....
              I first saw it with 5.1 sp8....
              In the release notes for 5.1 sp10, the following CR was fixed, which seemed
              like it might have been my problem:
              CR 45915
              Fixed a JMS problem with messages begin left in the queue after received messages had been acknowledged. When a high volume of
              messages was sent to a queue and a consumer retrieved those messages and sent them to another queue, the messages were not being
              removed from the first queue even though they were acknowledged.
              We upgraded to 5.1 sp12, and it appeared that the incidence of that problem was reduced.
              However it still occurs once or twice a week, with 5.1 sp12....
              My situation is a little bit different, in that my consumer retieves a message, and sends another
              message to the SAME queue instead of another queue as described in the CR above...
              It does happen under heavy load, etc....
              Don't know if this has been reported and identified for wl 5.1 sp12 or not...
              It is of course a really difficult to deal with bug....
              Jason
              "Juha Räsänen" <[email protected]> wrote in message news:[email protected]...
              >
              > Hi,
              > I'm experiencing some unexperienced JMS store behaviour with WLS 6.1 sp 4. I have
              > a servlet that posts a message to persistent JMS queue, which will be eventually
              > consumed by an MDB. Even though consumption is successful, the message is not
              > deleted from JMS store.
              >
              > The message will be redelivered after server restart and is still not deleted
              > from JMS store. I verified this using file store and JDBC store. The messages
              > actually stay in the JMSSTORE table till doom's day.
              >
              > I couldn't reproduce the case with WLS 6.1 sp 3. Exactly the application code
              > was used in all cases.
              >
              > Subsequently I ran the same case with various ServerDebug DebugJMSXXX-flags set,
              > and discovered that WLS 6.1 sp3 logs 'asyncDeleteL' and 'ZZZDelete' for the consumed
              > message. WLS 6.1 sp4 didn't log this information.
              >
              > I'm running WLS 6.1 on WinNT and Win2000.
              >
              > Comments?
              >
              > b r
              > Juha Räsänen
              

  • Messages are NOT deleted from tables XI_AF_MSG and XI_AF_MSG_AUDIT

    Hello,
    I set the retention period to 7 days (1 week)
    I also set the default ARCHIVE and DELETE jobs and ALL are working fine.
    However, messages with OLD dates are NOT deleted from the tables XI_AF_MSG and XI_AF_MSG_AUDIT.
    These tables 32GB in the DBD table space.
    I tried to use the URL:
    http://<host>:<port>/MessagingSystem/archiving/reorgdb.jsp
    BUT to NO avail.
    How do I DELETE or ARCHIVE these messages ?
    ============================================
    Here are some more details on the content of the tables (I took into account 1 MONTH retention):
    db2 "select count(*) from sapxi3db.XI_AF_MSG_AUDIT where STATUS='SUCC' and TIME_STAMP < '2007-09-10 00:00:00'"
          28947
      1 record(s) selected.
    db2 "select count(*) from sapxi3db.XI_AF_MSG_AUDIT where STATUS='ERR' and TIME_STAMP < '2007-09-10 00:00:00'"
          13243
      1 record(s) selected.
    db2 "select count(*)  from sapxipdb.XI_AF_MSG where PERSIST_UNTIL < '2007-09-10 00:00:00' and STATUS='NDLV'"
           1048
      1 record(s) selected.
    db2 "select count(*)  from sapxipdb.XI_AF_MSG where PERSIST_UNTIL < '2007-09-10 00:00:00' and STATUS='DLVD'"
              0
      1 record(s) selected.

    Hi,
    First, thank you VERY much for answering.
    Now to your questions:
    1. When using the URL:
    http://<host>:<port>/MessagingSystem/archiving/reorgdb.jsp
        I did NOT get any ERROR messages.
        Thousands of messages where DELETED successfully.
        However, the number of rows in XI_AF_MSG_AUDIT did NOT reduce.
    2. I used the default archiving and deletion customizations and jobs.
       However, I ran them manually a few times a day with NO change in the
       number of rows in XI_AF_MSG_AUDIT
       What do you mean by "customized any Archiving for adapter Engine" ?
    . In RWB, I do see the default job is running
    Have you customized any Archiving for adapter Engine or You are using default arciving which runs every 24 hrs.
    3. I did ser the retention period for the adapter engine messages in visual admin in seconds...
    Please, advise further.
    Kind regards,
    Gil

  • Why are my emails not deleting from all devices when deleted from one?  I have iCloud set up and turned on. I have ipad2, iphone5 and a Mac. What am I doing wrong?  Thank you

    Why are my emails not deleting from all devices when deleted from one?  I have iCloud mail set up and turned on. I have ipad2, iPhone 5 and a Mac desktop. What am I doing wrong?  Thank you.

    It depends on the type of email account you are using, not on iCloud.  If you are using an IMAP or exchange account, when you delete from one device, it is deleted from all devices.  If you are using a POP (POP3) account, it won't.  (iCloud email, Gmail and Yahoo are all IMAP accounts.)

  • Verizon mail deleted from server is not deleted from IPAD2 but works fine on Android

    I have both an Android phone and an IPAD.  This Android (RAZR) and my previous one (Droid2) worked fine.   Mail deleted from the server is also deleted from the phone.  Deleted from phone would delete from server.  Worked great.  On IPAD, when setting up the Verizon mail account, it defaults to POP and I can set it to delete from server when removed from IPAD.  However, mail deleted from the server is not deleted from the IPAD and so I have to remove it manually (a second time).  Why does it work on Android and not on IPAD?  Settings on Android appear to also be for POP.  Can anyone help with this?  It's too hard to believe that with so many people using IPADs, that this is such a problem.   I've read that Verizon isn't supporting IMAP, but how in the world is the Android phone working?
    MrBigHands

    Any mail service POP downloads a copy of the message to the phone. It would then need to be deleted from the device itself. What you are referring to where its deleted in both places is an IMAP type email service.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Bug report: tranlations not deleted from WWV_FLOW_DYNAMIC_TRANSLATIONS$

    Hello, apex team and Joel Kalman.
    Bug(?) report: Translations not deleted from WWV_FLOW_DYNAMIC_TRANSLATIONS$ on application replacement with importing from sqlplus using apex_application_install package.
    My environment:
    Oracle XE 11g Linux 64bit.
    Apex 4.1.1.
    Development app 110.
    Production app 111.
    How to reproduce:
    Simple way (not checked for 4.1.1):
    Export application 110 by using builder or APEXexport.
    Import application 110 ten times, then look into dynamic translation. Each translation repeats 10 times.
    Checked way to reproduce this bug in in 4.1.1:
    Repeat this 10 times to see how dynamic translations is multiplied in app 111.
    Export app 110 with bash command:
    $ java oracle.apex.APEXExprt -db xxx.private:1521:XE -user apex_040100 -password `cat secret.txt` -applicationid 110 -skipExportDate -expTranslations
    Import with this script (as apex_040100 user)
    declare
    l_workspace_id number;
    begin
    select workspace_id into l_workspace_id
    from apex_workspaces
    where workspace = 'PROD';
    apex_application_install.set_workspace_id( l_workspace_id );
    apex_application_install.set_application_id(111);
    apex_application_install.generate_offset;
    apex_application_install.set_schema( 'PROD' );
    apex_application_install.set_application_alias( 'FPROD_APP' );
    end;
    @../f110.sql
    Workaround:
    Run this script before each import:
    DELETE FROM apex_040100.WWV_FLOW_DYNAMIC_TRANSLATIONS$
    WHERE flow_ID = 111;
    If it is not a bug, please, explain me better way to workaround it for me.
    Vladimir

    Hi Vladimir,
    +>> Hello, apex team and Joel Kalman.+
    Actually, it's Kallman. But I'm not complaining...I get plenty of emails from within Oracle addressing me as "Joe".
    This is definitely a bug. It isn't disastrous, but it's slightly worse than you even presented. I found that if you manually delete an application from within the Application Builder, the dynamic translations remain as well. They could potentially be orphaned forever.
    Your workaround, while not recommended to directly manipulate the APEX schema, would clear up the excess data. Also, a way to reduce the effects of this problem is simply to set the offset to what was initially generated the first time you imported application 110 as 111.
    I didn't write this logic, but I'll fix it. There isn't a FK on this table and I believe there should be.
    Bug 13801751 is filed, to be fixed for APEX 4.2.
    Thanks for reporting this.
    Joel

  • WBS elements not deleted from PRPS table

    Hi Experts,
    In CJ20N transaction:
    When I delete a project with project profile (ZABC):
      - The project record is completely deleted from 'PROJ' table.
      - The WBS records are completely deleted from 'PRPS' table.
    When I delete another project with different project profile (ZXYZ):
      - The project record is completely deleted from 'PROJ' table.
      - The WBS records are NOT deleted from 'PRPS' table.
    What is the reason for not deleting records from PRPS table?
    Thanks in advance for your valuable answers.

    WBS should be having actuals.

  • Concurrent request got deleted from a request group

    Hi,
    Somehow a concurrent request got deleted from a request group. Is there any way so that we can determine the person from whose login it happened.
    Thanks in advance

    Hi,
    You can try using PSA if that request it's still there.
    Otherwise, you will need to regenerate that request in source system (by filling setup tables with parameters) and update BW with a full load.
    Hope this helps.
    Regards,
    Diego

  • Songs deleted from Library but not deleted from Hard Disk

    HELP: I had multiple songs repeated in my Library, deleted the songs and cleaned up the Library data base. Some songs were NOT deleted from the hard drive. Copied all my music to my laptop computer and asked Itunes to rebuild database. There are about 1100 more songs in the new data base than in my home computer. how can i erase all the songs that are on my laptop hard drive that are not in my itunes Library?

    You may have to rebuild your iTunes Match library by turning it off on both your computer (iTunes>Store>Turn Off iTunes Match) and you phone (Settings>Music>iTunes Match>Off), then turn it back on on your computer, and when complete, turn it back on on your phone.

  • While deleting project from CJ20N entries are not deleted from table PRPS

    Hi,
    I am deleting project from CJ20N then from PROJ table entries are getting deleted but WBS element entries are not deleted from table PRPS.
    Any deletion Flag should also be checked?
    Thanks in advance!
    Regards,
    Jyoti

    Hello,
    Thanks for reply !
    My problem is I am deleting project and WBS Elements from CJ20N but WBS element entries are not deleted from PRPS table.
    Why they are appearing in PRPS table and how it can be deleted?
    Thanks !

Maybe you are looking for