Overlapping two tables in adobe form

Hi
I have a requirement to print details based on different bill numbers in different pages.
I have two internal tables
1. it_inrt containing two fields
2. it_prts containing four fields .
Tthese two tables are looping separately. during program execution it_inrt overlaps it_prts. my question is that how to prevent this overlapping i want to print it_prts only after printing all rows of it_inrt and the excess rows will continue in the next page.
Please help me to solve this problem.

Hi,
You have to 2 internal tables right,
You have to print the data which is in First internal table and same for second internal table..
Place thes to tables(one after another ) in Desgin page of - Adobe forms..
Under page there is Untitled content area and renamed as ( page area 1)
In hierachy tab - By default you will see the Untiled Subform page ( Here drag the First Internal table to here and change the   subflow as flowed ,pagiantaion as continued in untitled area). add another internal table to this form..
create a new page with only Untitled content area and renamed as ( page area 2)
Steps:
Select Untitiled subform - under pagination - Place Select ( In content area of page area 1 )
                                          if dataset must be paginated - overflow to ( Go to content area of Page area 2 )
                                        - under subform - make the content as flowed and check the allow page breaks within content.
Regards,
PraVeen
Edited by: praveenreddys on Feb 21, 2012 3:53 PM

Similar Messages

How to avoid overlapping of Table on another table in Adobe Form

Hi Experts ,
Can anyone tell me how to do this scenario,When I am inserting 3 flowable tables in Adobe form ,issue is one form is overlapping over another, All the internal tables has 10 records minimum. Requirement is after one table is printed Next table should be start printing without overlapping on next further table... Please let me know How to avoid overlapping of table on another table.Advance thanks.
Thanks & Regards
Sandesh

Hi Sandesh.
Put your table in subform. (one for each)
And than add one more subform and include all 3 table's subforms in single subforms.
All subforms should be flowed.
With Regards,
JP

How to use nested tables in adobe form

Hi All,
I have to use nested tables in adobe form for table display. I have used Subforms for displaying table data. I have changed accessibility of the subforms. Currently i am able to print print the table correctly if there is single material record in table 1 and single corresponding record in table 2. But the requirement is that i will have multiple lines in table 1 for single material and only one record in table 2.
EX: form is for Sales order. in line items if the order is for 100 units then we if we have delivered material as 80, 10, 10, then table 1 will have 3 lines for this. Table 2 will always have only 1 corresponding record.
item--materialdescription-ordered qty--delivered qty--delivery date-price
xxx--xxxxxxx-xxxxxxxxx-10080xxxxxxxxxx-xxxx
10----
xxxxxxxxxx
10----
xxxxxxxxxx
yyyyyyyyyyyyyyyyyyy------yyyyyyyyyyyyyyyyyyyyy
xxxxxx is table 1 and will have multiple lines
yyyyyy is table 2 and will have only 1 entry for item xxx
and this group will be repeate as per no of items. table 1 can have any no of lines per item.
I am currently able to display 1 line for table 1 and 1 line for table 2.
But how to show multiple lines for table 1 and 1 line for table 2.

HI,
Set the body page as flowed and set the tables also flowed.
go to bodypage>object->subform-->select flowed option.
I thihnk this will work..if u are getting all the records properly into the tables 1 and 2.
Thanks,
Mahdukar

How do I get to have more than 20 columns in a table in adobe form?

I see that there is limitaion to not have more than 20 columns in my table in adobe form, Is there any way I can have more than 20 columns in a table in adobe form in landscape mode.

Hi,
That only relates to the Table Wizard. Once the table is placed on the page, you can add columns manually, from the menu or right-clicking on a column.
You can also use fields within a repeating subform (instead of the table object).
Good luck,
Niall

Merging of cells of a dynamic table in adobe form

Hi,
I am trying to Merge 2 columns in a dynamic table in adobe form.The requirement is to merge column 3 and column 4 if column 4 is empty. I used the below javascript code in both "Form ready " and Initialize event of the row.
if (this.Cell4.rawValue == " ")
this.Cell3.colSpan = "2";
this.Cell4.presence = "hidden";
Note : Since above code was not working , i used the below code in my subform also but it did not returned desired output.
if(Table22.Row1.Cell1.rawValue == " ")
Table22.Row1.Cell3.colSpan = "2";
Table22.Row1.Cell4.presence = "hidden";
The problem is that in my dynamic table , its the second row where the requirement is fulfilled ie in the 2nd entry of my table the column4 is blank (the exact row number might change depending on input data).
is there a way to loop in the dynamic table and check if column 4 is empty for a particular row.
the above code does not help to fulfill my requirements. kindly help.
Thanks
Aditi

Hello Aditi priya,
Hope you are doing good..
Please go through my recent blog..
http://scn.sap.com/community/interactive-forms-by-adobe/blog/2015/01/02/merging-internal-table-cells-dynamically-in-sap-adobe-forms-using-java-script-code
I hope you will find all answers from this blog..Reward if helpful...
Thanks & Regards,
B Raghu Prasad

Problem with table in Adobe Form in Web Dynpro JAVA??

Hello all,
I have an issue with the table displaying all the node values in the Adove Form. Right now it displays only the first element of the Node even if there are multiple entries.
Not sure what is going wrong here.
How is the table created in a interactive form? Any help is appreciated.
Thank you, John

Siva,
I referred to the website, but still having issues with generating tables in Adobe Form. I can get all the table rows in the adove form, but the pdf doee not add new pages to display all the table rows. It just createa one page with the table inside it, display few of the rows and truncates rest of the table data.
Here is the heirarchy of the page with the properties set
Master Pages ---
        ||--> Page 1
                 ||--> content area
                 ||--> subfrom (properties:: Content - Flowed / Flow direction - top to bottom...pagination tab is greayed out completly)
                            ||--> Table
                                      ||--> HeaderRows (Object: Row - Type: Header Row)
                                      ||--> Row1 (Object Tab/Binding: Repeat Row for each data item - checked)
Can't make it wor, not sure what's wrong here
I am using NDS 7.0 SP18 and Adobe LiveCycle 8.0. Does that could be a problem.
Appreciate your help
John

Restricting visibility of table in Adobe form in WdJava when node is empty.

Dear Experts,
We have a requirement for Formcalc or Javascript code for making the table on adobe form invisible when the node corresponding for the table in the form is empty.
Please suggest ASAP. Thanks in advance.
Regards,
Mahesh.

Hi
In the table's layout ready event write the following.
//formCalc
if(data.Page.<table>.<Row1>.<field>.rawValue == null or data.Page.<table>.<Row1>.<field>.rawValue == "" ) then
$.presence = "hidden"
//this.presence = "hidden"
endif
Kind Regards
Mukesh
Edited by: Mukesh mani on Nov 23, 2009 1:26 PM

Printing data from table in Adobe Form.

Hi all,
    How can i print all data from my internal table in adobe form.currently only last record from table is getting printed.i have put my table is in sub form and content i have made 'Flowed'. is there anything else i have to do to make all data from my internal table appear.
Thanks & Regards,
Anjana Rao

HI Nimesh,
This looks ok and works well, but the problem is its not printing the header data, all the headings its leaving that place as blank. Do you have any suggestion for this. This is the code is used.
DATA: pgm LIKE sy-repid,
        tc TYPE cxtab_control.
pgm = sy-repid.
tc = tab.
CALL FUNCTION 'FITRV_PRINT_TABLE_CONTROL_DATA'
    EXPORTING
      TABLE_CONTROL                        = tc
      CALLBACK_PROGRAM                     = pgm
     CALLBACK_TOP_OF_LIST                 =    'TABLE_TOP_OF_LIST'
    CALLBACK_TOP_OF_PAGE                 =
    CALLBACK_END_OF_PAGE                 =
    CALLBACK_END_OF_LIST                 =
     OPTIMIZE_COLUMN_WIDTH                = 'X'
     GET_CURR_QUAN_FIELDS_FROM_DDIC       = 'X'
    WINDOW_TITLE                         = 'PRINT TABLE'
      PRINT_IMMEDIATELY                    = 'X'
    TABLES
      PRINT_DATA                           = ITAB
   EXCEPTIONS
     COLUMN_INFORMATION_MISSING           = 1
     PRINTING_NOT_POSSIBLE                = 2
     OTHERS                               = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Venkat

Create multiple tables in adobe form

hi,
Is there anyone can tell me how to create multiple tables in Adobe Form using SAP Netweaver Developer Studio. Are there any steps i can follow?

Hi,
Define the tables in subforms and then wrap them into another subform and make it the subform as type flowed.
Regards,
Raju.

Multiple rows in a single table cell - Adobe forms

Dear All
I am developing an adobe form which conatins a table alongwith other screen/ form elements.
This table is bound to a data node and contains only two columns. Number of rows will be determined at run time.
Each cell of the table will contain three rows seperated by a space in between them. Please refer to the diagram below for more understanding.
Yes
ABC
No
PQR
Not Known
XYZ
I have no idea how to achieve this. Can anyone help?
Regards
Vineet Vikram

Hi,
Here are the steps how you can do it.
1. Create a table.
2. In the Library palette, click the Standard category and drag the Table object into a cell in the main table.
Note: If you selected Donu2019t Show This Again in the Insert Table dialog box, when you select the Table object from the Library palette, LiveCycle Designer automatically inserts a table with the same number of columns and rows that you inserted the last time you used the Insert Table dialog box.
3. In the Insert Table dialog box, enter the number of columns and rows. You can enter a maximum of 20 columns and 50 rows. You can add more columns and rows after the table is created by using the Insert commands on the Table menu.
4. To add a header row, select Include Header Row In Table.
5. To add a footer row, select the Include Footer Row In Table.
6. Click OK.
Regards
Runal

Tables In Adobe Forms

Hello,
I have a requirement to display a table based on condition.
Based on the condition only one table should be displayed.
Table 1
Table 2
If (X==1)
Display table1
else.
Display table 2.
Endif.
Please provide the solution to achieve this.
Thank you!
Regards,
Patil

Hi friend,
There is many ways to achieve this. For example if you have two tables and the number of fields for two table is same then you can dynamically fill the table in the interface based on your condition and pass that value alone to the form so that you can achieve your requirement.
Else if you are comfortable with Java code there is an option to hide a table row in Adobe form. The code for that is
Table1.Row1.instanceManager.removeInstance(<rowNumberHere>);
So there also will be an option to hide a table in that. (Since i am not worked in Java Script i cant tell you much in Java Script).
Also see this link which will be helpful to you.
Link : [Adobe Form - Hide a table row if a condition met|Adobe Form - Hide a table row if a condition met;.
I think this will help you solve your issue. If you face any issues in this please revert back to me i will help you.
Thanks,
Sri Hari

Read mutliple dynamic rows of a Table in Adobe Form into GP's context

Hello All,
I have a GP scenario where in user inputs multiple rows of data in a table which is on an Interactive Adobe Form.
I want to read those values entered dynamically and passed between callable objects.
Please could you suggest on this? If you post any sample code that would be of great help.
Best Regards,
Suyukti B N

Hi Tamas,
I checked the mentioned form and, as this table is setted as TABLEROW and some of its cells are static, is not possible to change the column size in the layout or even though changing it directly in the XML file, cell by cell. I was trying it.
For example, choose the Cell6 of TABLEROW[0] and click on tab 'XML Source'. You will see this statement:
<draw colSpan="3" h="16.3166mm" name="Cell7" w="22.225mm">
You can try to change the value 'colSpan' according to your requirement.
This table size is not modifiable because it was developed to it.
I believe that Diego's suggestion can help in this case, if you are having problems to print the entire table on the page.
Regards,
Lucas Comassetto.

Problem with text formatting within a table in Adobe Forms

Hi all,
I have a table on a non-interactive Adobe form (which is a copy of the standard expense form PTRV_EXPENSE_FORM. The table in ABAP has a text field with CHAR50. On the form, the text field has a width which allows approximately 35 characters. Therefore the text wraps onto a second line. My problem is that the text is not formatted and words are just split randomly.
For example:
The fox ran across the fields and into the woods.
would be output as:
The fox ran across the fields and i
nto the woods.
How can the text be formatted to only output complete words?
I have tried defining the textfield as text only and rich text, but nothing changes the output.
Interestingly, even if I change the font size from say 10 to 8, the text is output the same, even though there is enough space for at least one more word on the first line.
Has anyone else come across this problem?
Thanks,
Patricia

Hi Syed
The table is IT_RECEIPTS_ADD_INFO, field VALUE_CHAR. In the form it is called Receipts_addl_info.
I have just found out that the data is being re-formatted in the interface. That caused the problem. Many, many thanks for your help.
Best regards
Patricia

Problems with Image Field Table in Adobe Forms

Hello,
I have a desgined a Adobe Form(Print Only) in the Adobe Desinger in NWDS.
The form layout contains a table of images in 2 columns and 3 rows. Every Column has a Image Field and a TextField displaying the Image URL.
The URL of this image is passed at runtime.
The problem is that when the form is rendered, All the Columns have the same image which is the URL in the first row first column. However the text field displays the correct URL.
Is this some known bug in the Adobe Forms, or I am missing some property.
Regards,
Shubham

Hi,
The solution was to put the following code in the initialize event of the image field.
this.value.image.href = <Photoimagepath>.rawValue;
Where <Photoimagepath> is the image path.
Regards,
Shubham

How to modify automatically the show length of table in adobe form

hi,experts.
i often need adobe form to output imformations in table forms..sometimes i don't know the length of each column previous. so i want to make that the adobe form can adjust the output length of table column automatically depending on the content..
i am new about JavaScript of adobe forms. hope someone can give me suggestions
thanks in advance.

Hi,
You may select the particular column and then in the Layout Pallette, select the radio button for "Expand to Fit" which would be under Height. That way your cells would automatically adjust for size(Would grow in height). But the size wont grow in Width, that remains fixed as you would have fixed during design time.
Regards,
Runal

Overlapping two tables in adobe form

Similar Messages

Maybe you are looking for