Overlay mode won't display recorded programs

I have an MSI GeForce4 MX440-VTD AGP8X card and a Leadtek Winfast 2000XP TV Deluxe tuner card. Using overlay mode, I can easily redirect the normal cable output from the Winfast PVR application to my TV, and it looks perfectly fine.
However, when I open a stored video file recorded by the Winfast PVR and try to redirect it to the TV, the video will not display....I only get a black screen or a frozen screen of the last image from the analog cable stream. Overlay mode only plays the incoming analog cable signal and simply refuses to display the playing recorded program.
Audio works perfectly.
Yes, I can play the application in overlay mode with Windows Media Player, but then I lose the ability to use the PVR's remote control to fast forward thru commercials, etc.
I have the latest BIOS on the VGA card and the latest mobo (K7N420D-PRO) bios, and have tried nvidia driver versions 43.45 (currently) and 41.09. I have even tried turning off overlay mode, starting the recorded program in the PVR, and enabling overlay mode while it's running...no different - just a black screen.
This is the primary functionality I needed in order to turn my bedroom pc into a PVR, and yet it does not work.
Any help or suggestions would be appreciated...
Deron

I'll try and do my best to describe what it is I'm doing.
I've started out with a “flat” image of a product on a white background with a shadow on it. I need to make the background transparent and so that all I’m left with is the product with the shadow on a transparent background.I want to be able to place this image over another image in indesign and have the background remain transparent.
On the first layer I have a clipped out version of the product with no background (All by itself with no background or shadow). On the second layer I have the original “flat” image with the shadow and white background. On this layer I’ve used the multiply blending mode to remove the white background.
Now that I have the product on one layer by itself and the product and shadow on layer two with the multiply blending mode I have an image of the product with a shadow with no background. When I place this into indesign, my image shows up with the white background as if the multiply blending mode isn’t applied.
I’ve tried this on other images. It doesn’t appear that it lets you bring an image over with that blending mode. It's like I'd have to bring over a clipped image and then place that on top of my original image with a blending mode placed on it "in" Indesign.
Hope that make sense?

Similar Messages

Layered image with blending mode won't display properly in Indesign CS3

Hello,
I'm having trouble placing a layered psd and/or tiff with blending modes into my indesign cs3 document. Basically I have a flattened image with a shadow on a white background. I've had to doctor the image a bit in photoshop and I've used the multiply blending mode to remove the white background. (I'm trying to get around having to clip the image and having to recreate the shadow). Anyone know how I can drop my layered image into indesign and have it keep the blending modes I've applied in photoshop?
Any help would be much appreciated.

I'll try and do my best to describe what it is I'm doing.
I've started out with a “flat” image of a product on a white background with a shadow on it. I need to make the background transparent and so that all I’m left with is the product with the shadow on a transparent background.I want to be able to place this image over another image in indesign and have the background remain transparent.
On the first layer I have a clipped out version of the product with no background (All by itself with no background or shadow). On the second layer I have the original “flat” image with the shadow and white background. On this layer I’ve used the multiply blending mode to remove the white background.
Now that I have the product on one layer by itself and the product and shadow on layer two with the multiply blending mode I have an image of the product with a shadow with no background. When I place this into indesign, my image shows up with the white background as if the multiply blending mode isn’t applied.
I’ve tried this on other images. It doesn’t appear that it lets you bring an image over with that blending mode. It's like I'd have to bring over a clipped image and then place that on top of my original image with a blending mode placed on it "in" Indesign.
Hope that make sense?

1 of 2 DVRs won't play recorded programs

I have 2 DVRs, the 'master' DVR and a secondary one. The secondary one suddenly stopped letting me play recorded show. If I try to play anything, it freezes for about 30 seconds and then goes back to live TV. I've reset the box and used the in-home agent to no avail. Any suggestions?

I have 2 DVRs, the 'master' DVR and a secondary one. The secondary one suddenly stopped letting me play recorded show. If I try to play anything, it freezes for about 30 seconds and then goes back to live TV. I've reset the box and used the in-home agent to no avail. Any suggestions?

I updated to iOS 7 and now some of my apps won't display in landscape mode and they did before the update. Any ideas on how to fix it?

I updated to iOS 7 and now some of my apps won't display in landscape mode and they did before the update. Any ideas on how to fix it?

This could be from having restrictions enabled. Icons completely disappear when "restricted"

How to display record in column mode?

Hi,
I have difficulty in displaying record in column mode.
Example: I have CALENDAR table with column DATECOL
CALENDAR
DATECOL DATE
Data in CALENDAR table is follow : 1/1/06, 2/1/06, 3/1/06, 4/1/06, 5/1/06, 6/1/06
How to create SELECT statement so result will be follow:
DATECOL 1 2 3 4 5 6
Any advise from you ?
Regards

Hi,
Try this:
DECLARE
z_result VARCHAR2(2000) := ' ';
CURSOR c1 IS
SELECT DATECOL
FROM CALENDAR;
BEGIN
FOR i IN c1 LOOP
z_result := z_result || TO_CHAR(i.DATECOL,'DD') || ' ';
END LOOP;
DBMS_OUTPUT.ENABLE;
DBMS_OUTPUT.PUT_LINE('DATECOL ' || z_result);
END;
Peter D.

Itunes 9.02.25. in Windows 7 won't display CD Drive or play CD

Hi guys I've done some searching on the forum and checked the Gear driver in registry and updated the gear driver but to no avail. I still don't see an audio CD in iTunes.
Any other ideas?
Here's my diagnostic info:
Microsoft Windows 7 Home Premium Edition (Build 7600)
System manufacturer P5K PRO
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number 389D64CB379B5E01
Current user is not an administrator.
The current local date and time is 2010-01-07 09:43:11.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 3800 Series
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: e00e526b5693c874db09762a1577b72f
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
B: SONY DVD RW DRU-840A, Rev SS01
Audio CD in drive.
Found 12 songs on CD, playing time 44:56 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 00:44:05
Track 3, start time 04:20:63
Track 4, start time 08:12:71
Track 5, start time 13:19:56
Track 6, start time 17:28:60
Track 7, start time 20:15:70
Track 8, start time 24:35:31
Track 9, start time 27:32:43
Track 10, start time 31:52:68
Track 11, start time 36:15:31
Track 12, start time 40:07:32
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 24 32 40.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.

OK after many nights of googling I finally came upon a suggestion that fixed this issue.
Itunes won't recognise a drive letter earlier than c. The Windows 7 defaulted my drive to B. On the surface it seems like a stupid bit of programming logic to me.
To Fix - Control Panel -> System & Security -> Administrative Tools -> Computer Management. In the Computer Management select disk management in the left hand pane and this should display all of your drives in the center pane. Highlight you cd/dvd/blu-ray drive and then right click and select change Drive Letter and Paths. Select an unused letter higher than B. Restart itunes and voila the drive appears under devices.

How to display records into a non table base block..

Hi,
Can anybody help me how to display records into a non table base block....
Find below is my coding but it only display the last record in the first line
in the block.
PROCEDURE CREATE_CARTON_QUESTION IS
CURSOR car_c IS
select /*+ rule */ question_id, question_description
from WHOP.QADB_QUESTIONS
where question_category = 'Carton'
and question_active_flag = 'Y';
v_found VARCHAR2(10);
v_status boolean;
v_error      varchar2(150);
v_count number;
car_r car_c%rowtype;
begin
begin
select count(*) into v_count
from WHOP.QADB_QUESTIONS
where question_category = 'Carton'
and question_active_flag = 'Y';
     exception
     when no_data_found then
     v_count := 0;
end;
if v_count > 0 then
for car_r in car_c loop
---populating carton questions
:la_carton.carton_question_id     := car_r.question_id;
:la_carton.carton_question_answer     := 'N';
:la_carton.carton_error_details     := null;
:la_carton.attribute2          := car_r.question_description;
end loop;
end if;
end;
Thanks in advance.
Regards,
Jun

Hi SNatapov,
Thanks for you reply but still I get this error...
FRM-40737 Illegal restricted procedure GO_BLOCK in WHEN-VALIDATE-ITEM trigger.
Please note that I call that program unit in the last field of my control block inside when-validate-item trigger the questions should be display in la_carton block which is my non-base table block.
Find below is the code....
begin
go_block('la_carton');
first_record;
for car_r in car_c loop
---populating carton questions
:la_carton.carton_question_id := car_r.question_id;
:la_carton.carton_question_answer := 'N';
:la_carton.carton_error_details := null;
:la_carton.attribute2 := car_r.question_description;
next_record;
end loop;
end;
Hoping you can help me this problem...
Thanks in advance.
Regards,
Jun

Difficulty using a projector. I have a MBP 17" and am running 10.6.8. Often I need to make a Powerpoint or other presentation at a client and I want to connect my computer to their projector. Either it won't display on the projector at all. HELP!

Difficulty using a projector. I have a MBP 17" and am running 10.6.8. Often I need to make a Powerpoint or other presentation at a client and I want to connect my computer to their projector. Either it won't display on the projector at all. Once it displayed but the presentation mode was on the big screen and the presentation I wanted to show was on my MBP screen. I have the adapter( white ones) to attached to the projector cables. I am so frsutrated...it looks so silly not to have a computer work during a presentation..
Another problem one the rare occasion that it shows on the screen is that the presentation does show just my desk top. Any ideas?
Thanks !

You often have to turn off Mirroring to be able to set the second "screen"s resolution to something reasonable. When you do, the two screens become an "Exceeded Desktop" joined along one edge, and the Arrange pane in displays prefs can allow you to specify what edge. Initially, it will show a vacant extension of the built-in screen's desktop.
The mouse moves freely across that shared edge, and can allow you to drag the presentation window across to the the projector screen and re-size it to fit.

Clamshell mode won't work with OSX Lion

I am running a 2010 13" Macbook Pro and a Dell ST2410 23" external display. I have been using an HDMI to mini displayport cable with this setup for over a year without a problem. Now my monitor goes dark when I try to setup the MBP in clamshell mode. I even tried to lower the resolution on the monitor to see if that would remedy it, and it won't display anything. This problem first started when I upgraded to 10.6.8, and now is giving me problems in 10.7. Help!

assuming that you have an external monitor (you said 23"), usb kbd & mouse. How do you start it up?
I always opened the lid, hit the power and quickly closed before the chime would sound. Do you boot OS X up, then close the lid? Or do you do it as I do?
My PB is on 10.6.8 and never had any issues, besides running a little hotter..

Hp 110-a04 won't display video when my 5670 is plugged in.

So here's the dealio. Bought a myself an hp 110-a04, threw in the sapphire 5670, doesn't display anything and I get a 6 long beeps beep code. Kill me.
So, I take out the original PSU (it's only 180 watts), throw in a 400 watt power supply, toss in the GPU aaaaannnnnnd... still won't display anything and the beep code is back (in the old PC it was in worked fine with the 250 watt psu).
The computer works perfectly fine without the card, boots up, actaully displays stuff when plugged by VGA. Why it won't display anything is absolutely beyond me. Everything is hooked up to the new PSU, it's just that nothing works with that graphics card in.
Halp me.

Hello @HAIRSHAMENSTUFF,
I understand that you are having issues getting the sapphire 5670 to work with your HP 110-a04 Desktop PC. I suspect that you will have to enable legacy devices in your BIOS. Unfortunately, I do not have access to the BIOS for your computer to provide you with step by step instructions, but if you tap F10 on startup and enter the BIOS you can browse through until you find a way of enabling legacy support or mode.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

MacBook Air connected to projector won't display dvd in superdrive, but plays on macBook Air screen.

MacBook Air connected to projector won't display the dvd in the superdrive, but it is playing on the MacBook Air screen.
When dvd is ejected, MB A screen appears on the big screen through the projector. What do I need to do to get the training dvd showing on the screen?
Thanks

Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
Deselect proxies if selected.
System Preference > Network > Advanced > Proxies Tab
Uncheck “Auto Proxy Discovery”.
Click OK, Apply.

Occasionally Firefox 3.6.12 won't display photos on certain sites. Reloading works sometime but not alwasys.

At times on auction some sites such as ebay, (and others), photos won't display. If I press the reload button there's a chance the photo will display. If reload doesn't work the first time, pressing it 3 or 4 times may work but not always. Closing the site then re-opening works sometimes but not always. Annoying.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Windows 7 Professional XP Mode won't recognize internal DVD or external USB drives

Windows 7 Professional XP Mode - won't recognize USB external drives or internal DVD drive
I recently purchased a new Toshiba laptop and ordered configured with Windows 7 Professional so I could use XP mode for some older programs. The Virtual Mode and XP mode work ok, but the computer will not
recognize any external USB storage drives or the internal DVD drive. This prevents me from saving and transferring any file that I work on in XP mode.
,I also tried to copy and paste the file from XP Mode over to a document file to 7 Professional Mode, but it won't allow that. It also will not recognize any printer when in XP Mode,
so I can't print out the file either.
Basically, I have no way to store or move a file out of the computer when in XP Mode.
Does anyone know what I need to do so that the computer will recognize the USB drives and internal DVD drive when I am running in XP mode?

Checked these ?
http://social.technet.microsoft.com/Forums/en-US/b44bbcf1-04d4-4a2f-8806-d34d2d8b477b/windows-7-with-xp-mode-not-recognizing-usb-20-port?forum=w7itprovirt
http://social.technet.microsoft.com/Forums/en-US/dd9cd509-f9ac-4295-a75b-863f92f5595f/windows-7-notices-but-does-not-see-external-usb-hard-drive?forum=w7itprohardware
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Itunes store won't display since upgrading to itunes 9 - use iolo antivirus

Since upgrading to itunes 9 we cannot view the itunes store. I get a blank white background stating "itunes store" in gray across it. I can see itunes column browser but not regular visuals. I noticed when i ran diagnostics, it is accessing the store. I just cannot view as normal viewing. Not sure what the regular view is called.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
GATEWAY 831GM
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver 1.45.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number
Current user is an administrator.
The current local date and time is 2009-11-26 17:21:52.
iTunes is not running in safe mode.
Video Display Information
Intel(R) 82915G/GV/910GL Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: ab03b4effd7d7ce89cc5e767eb58a934
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {31F7DC76-FB9B-48AA-9E4A-9B8D8834B8CF}
Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address: 192.168.1.46
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Thu Nov 26 08:14:21 2009
Lease Expires: Fri Nov 27 08:14:21 2009
DNS Servers: 192.168.1.1
192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2009-11-26 17:20:39.

I'm having the same problem! At first after installing leopard it wouldn't let me access the apple site! Called support they had me make up another user and access it from there and it worked. Also closed all my start up items. Now it won't let me access Itunes store even though I can access the web for everything else! Any clues??

Java 3D won't display anything

Hi,
I'm trying to get Java3D demos to run so I can begin developing a game. The problem is I get nothing but a blank white square the size of the intended 3D display. Everything I've tried (the list is long) has had no effect. When attempted through a DOS window I get an endless repeating list of : "wglCreateContext Failed: the pixel format is invalid".
The updated drivers for the ATI radeon 9000 pro (all in wonder) shows openGL (classic) is active but nothing 3D is displayed, everything else in Java (2d, swing components, etc.) all displays normally. I've updated DirextX and tried reinstalling Java3D for that format but no change. I'm not familiar with any 3D graphics programming (yet) and it's difficult to understand what won't display. I have posted a bug report with Sun after searching for similar bugs, but all related bugs just show "closed: fixed". Has anyone had this problem or have any clue what I might try (other than waiting) to resolve this issue? Thanks,
Jerromy

There are known issues with ATI drivers and java 3D that cause behavior like this. I don`t use direct-X so I can`t sugget anything, except to search the forums at http://forums.java.net/jive/forum.jspa?forumID=70
to see if your ATI card has a workaround
regards

Overlay mode won't display recorded programs

Similar Messages

Maybe you are looking for