Overloads oon Powerbook G4 1.5 after song has been idle

Hi All
I've got a huge show to do in a couple of days time and for a couple of songs I have been trying to run a stereo mix from my Powerbook G4 1.5gb with a click on a 3rd track sent to the drummer . What I'm finding is once the songs have been loaded for a few hours, and particularly if I haven't run a song for a while, playback is (looking at the bar/time counter) a bit jerky and I've been getting overloads where the song just stops, Logic has even skipped the odd 16th, obviously this would be disastrous during the show. Now I've turned the energy saver settings to never sleep and to highest processor speed and used CHUD tools Spindown to not allow the disk to spindown, as I thought it might be this, but still no joy.
I have an 80gb 7200rpm internal drive with journaling switched on and 13.5 GB free. I find if I quit Logic and re open the songs everything runs smoothly again, so what is slowing it down after taking a break for say a couple of hours ?
Our sound man who was working with the Petshop Boys said they had tried to do a similar thing and had to abandon
using Logicpro on a Powerbook as it just wasn't reliable enough, surely I should be able to run 3 tracks of 16bit 44100hz audio all day long with no problems ?
Help please....Any ideas would be welcome.
Thanks in advance
Best Regards
Mike
G5 Quad 4.5gb RAM
Mac OS 10.4.7
Powerbook G4 1.5ghz 1.5gb RAM
Logic Pro 7.2.1

I'll make a test with my machine which seems to be similar to yours and report.
We are also using an iBook G3 in our band live without problems for the same task, since I told my bandmate to not let the disk sleep in SysPref.
Before, we had the same problem.
Did you have a look at the logs in "Konsole".
Any notes regarding audio there?

Similar Messages

Short Clicking noise when resuming pc after it has been idle

This isn't really a problem just something that is annoying me. When going to my pc after it has been sitting idle, (not hibernating nor do I have the hardisks turnoff ever) I notice a one time short clicking noise from the box. To me it sounds like some extra voltage is being sent somewhere. It has never caused a problem and my rig is and has been stable since I built it. I did have a cheapo powersupply blow up on me so I've kinda been tuned in to that. Anyone know what I'm referring to? Thanks.

It is a non issue really...I've had alot of machines do this...it is the HD that's doing it and some of them I've seen *especially the older drives* did it all the time...they have a spot that they rest the heads at and when you're away from the machine it parks it there...then it sets a safety level on it and when you come back it doesn't always wait for the safety lever to unegage and that is the click you hear...I don't know if they still do this or not but that click is common...
Sometimes tho that click, to me, means that the drive is on its way out...but that hasn't been the norm...
Cheers!! 8)

My library of 800 songs has been replaced by 48 older items which I believe are off an older device (old nano belonging to another family member). How do I get my songs back?

My library of 800 songs has been replaced by 48 older items which I believe are off an older device (old nano belonging to another family member). How do I get my songs back?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

My computer does not eject the disc after it has been burned.

I understand that my computer is supposed to automatically eject a disc after it has been burned. Mine doesn't. Instead, I hear a "Plonk," which I assume is announcing that the burning process has been completed.
First of all, is it true that the disc is supposed to be ejected after the burn has been completed? Secondly, how can I restore that function?

Diane Wordsmith wrote:
To clarify...are you importing songs from a CD into iTunes, or are you burning songs from iTunes onto a blank CD? If it's the former, iTunes won't eject it...you'll just hear a chime or noise when it's done. If it's the latter it should eject.
For the second poster, it sounds you are importing. In which case, you will just hear the sound when importing is finished and you eject the CD yourself.
Just to make sure that I understand you correctly, here's what I did: Imported songs from website. They were in RealPlayer format. I then converted the song files into MP3 format, and put them into my iTunes music library. Finally, I put the songs in a New Smart Playlist, and burned them into a blank disc.
Given this situation, should I expect the disc to automatically eject when the burning is competed? If so, what do I have to do to get it to work properly?

How to forbid any further changes for PO (QTY and price ) after it has been

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh

How do I determine the # of times a song has been down loaded; 7 is max?

How do I determine the # of times a song has been down loaded? Is 7 max?

Jim, I apprecite your help. Im still lost...not that efficient on computer. Some notes, If burn playlist to disc doesn appear in the menu, it means that the playlist you selected cant be burned to a CD because it contains items that have usage restrictions; if the playist contains itunes store purchases that are not itune plus songs, you can burn the playlsit to a CD up to 7 times; DRM - Digital Rights Management???? Any help is appreciated Thank You

Set Cursor.vi fails after it has been called for 30 different panel refs in LV 7.1.1

Make sure both attached files (Run LabVIEW_Cursor_TestCase.vi, SimpleVI.vi) are in the same folder. Run LabVIEW_Cursor_TestCase.vi notice that the -3 error code is returned from "Set Cursor.vi" after it has been called with 30 different panel refs. If "Set Cursor.vi" is replaced with "Set Busy.vi" the same error occurs.Is there a workaround for this problem other that setting the cursor image manually in user32.dll? I must be able to open more than 30 panels and set them all to busy. In the test case I used a single VI, simply to demonstrate the error.
Message Edited by Jerred on 05-04-2007 10:06 AM
Attachments:
LabVIEW_Cursor_TestCase.vi ‏68 KB
SimpleVI.vi ‏13 KB

This bug is fixed in LabVIEW 8.0 and later. Unfortunately, I know of no workaround in LabVIEW 7.x. When I encountered this bug in one of my UIs in LabVIEW 7.x, my "fix" was simply to ignore the error outputs from the cursor VIs, and to live with the fact that I had no custom cursors after 30 windows had been opened.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

One song on my iPhone only plays the background music on the build-in iPhone speakers. The song has been on my phone for a while and it used to play just fine. With the headphones on it plays normally.

Please help! (I'm actually doing this for a friend but still)
All you need to know:
- iPhone 4 16GB
- iOS 6.0.3 (I think, not the latest iOS but the one before that)
- Song which started to act strange: niggas in Paris
- All songs work fine on headphones (including above)
- The song has been on the iPhone for a couple of months and used to play without any trouble
- When you play it on the iPhone's speakers you either only hear the background music, no sound at all (for a few seconds) or a weird old FM-radio noise
- Plays fine on iTunes
All help is appreciated!
Thanks.

I have this issue too. Same specs, newest OS. Happening on "O.N.E." by Yeasayer, but doesn't play the vocals through the speaker or headphone jack, unlike your issue. I just get all but the vocal track no matter what. Plays fine in iTunes. If you never get that distortion through the speaker any other time, maybe you can delete the song.
In my case, I can't delete the song through the phone since I use iTunes Match, but if you actually sync the songs/download them, that would be my first suggestion (swipe across, hit "delete."). Maybe that would work? Then resyncing or redownloading.
If not, maybe resetting or restoring may be the fix.

How do i get back my stateful session bean after it has been passivated

hi ,
How do i get back my stateful session bean after it has been passivated by container.
i'm confused that is it possible or not .......give me answer
i've one stateful sessionbean which i'm accessing throgh my normal java client . now what i'm doing is when i first time call a method it is running ......then i'm shutting down the server jboss .......it is calling my ejbPassivate() method ... at this particular time client program doesn't do anything.....
now after i restart my server i'm again calling back that business method with that last object reference.......it gives me the exception given below.....
java.rmi.NoSuchObjectException: no such object in table
java.rmi.NoSuchObjectException: no such object in table
     at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
     at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
     at sun.rmi.server.UnicastRef.invoke(Unknown Source)
     at org.jboss.invocation.jrmp.server.JRMPInvoker_Stub.invoke(Unknown Source)
     at org.jboss.invocation.jrmp.interfaces.JRMPInvokerProxy.invoke(JRMPInvokerProxy.java:118)
     at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerInterceptor.java:227)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:167)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:46)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:55)
     at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSessionInterceptor.java:106)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:86)
     at $Proxy1.makeNewAcc(Unknown Source)
     at client.GanJavaClient.main(GanJavaClient.java:46)so pls tell me that is it possible to get back that session besn or not

Stateful session beans are not persisted across restart of the EJB server instance(s) hosting them. You can't treat a Session bean as one would an entity bean.
Chuck

How to settle the expenses after AUC has been capitalised.

Hi All,
I have a understanding that after AUC has been settled, we can edit the settlement rule in WBS element and settle directly to the capitalised assets.
I can not see the settlement rule but investment profile since the project being a Capital comes from Investment measure and automatically created.
Can you tell me how to create a new settlement rule in this case. It is Urgent
Regards
VK

Hi Vijay,
This requires a change in the settlement rule since the AUC is no more and it must be the settlement reveiver earlier which should be changed to the main asset after capitalisation.
Please go to Transaction code CJ20N, select the WBS and go to settlement rule via edit > Cost and set the receiver as the fixed assets itself instead of AUCV since AUC has been transferred to main assets.
You can then settle using CJ8G or CJ88 but CJ88 is a better option.
I think, I have answered the same query.
Regards
Bharat

After Firefox has been running a while, every link opens a new window

After Firefox has been running for a while, every link starts opening in a new window. Until today, if I closed Firefox and restarted it, it would stop happening ... until it started happening again. Then today, I closed it down and restarted it, and it was STILL happening. So either I find a solution, or I stop using Firefox on my Mac.
This is a vanilla installation - both for the Mac and Firefox. I don't use the Mac as my main computer. The Mac is running OS X 10.5 8. The problem has existed through many upgrades of Firefox. I always upgrade as requested. This last time, however may have been the killer. A new upgrade was installed right before the problem became unfixable by shutting down and restarting. I'm running Firefox 15.0. I just rebooted, however, and now (for now), it's working properly.
I have no add-ons installed in Firefox.
My only plug-ins are iPhotoPhotocast, QuickTime, SharePoint, and Shockwave Flash.
I've seen multiple reports of this problem on this Web site, but no solutions. Just a generic recommendation to disable add-ons to see which one is conflicting. But I'm running no add-ons. I think there's a bug in Firefox.

If it were an extension or theme or a Mac driver, wouldn't it cause the problem consistently? This only happens after Firefox has been running for a while. I'm using Firefox to type this reply right now, and the problem is not happening.
And it's not because I suddenly start using some offending software. As I said, I don't use the Mac as my main computer. Usually I'll have been using my PC, I'll go back to the Mac to check my email on Firefox, and suddenly the link problem is happening. I only use the Mac to check email on the server before I download it with Outlook (on the PC) so I can delete spam on the server first.

Tiles- Cannot forward after response has been committed Error

I am trying to use following approach for my tiles implementation but i am getting error like
java.lang.IllegalStateException: Cannot forward after response has been committed.
I have gone thorugh the other posts regarding the same error but not helping me.
Any clues greatly appreciated.
Thanks,
Sachin
"I haven't found a way to directly dispatch to a tiles definition, but you can eliminate the need for multiple "wrapper" JSPs by creating a single "tilesDispatch" JSP that is able to dispatch to different tiles definitions, and establishing a convention for mapping URLs to that JSP, and identifying the tiles definition you want to load.
For example, you could use the following convention to identify a tiles definition:
/tiles/defName
where "defName" is the name of the tiles definition (from tiles.xml) that you want to use. The code for the tilesDispatch.jsp would be as follows:
<%@ page contentType="text/html;charset=UTF-8" language="java" %>
<%@ taglib prefix="t" uri="http://jakarta.apache.org/struts/tags-tiles" %>
<%
String tilePath = request.getRequestURI();
int slashIndex = tilePath.lastIndexOf('/');
if (slashIndex >= 0) {
tilePath = tilePath.substring(slashIndex+1);
%>
<t:insert definition="<%=tilePath%>" flush="false"/>
The scriptlet code takes the request URL (e.g. /tiles/defName), strips off everything up to and including the final slash (e.g. defName), then the tiles "t:insert" tag is used to look up and insert the corresponding tiles definition.
In order to map all URLs of the form /tiles/* to the tilesDispatch.jsp, you would need to add the following to your web.xml:
<servlet>
<servlet-name>tilesDispatch</servlet-name>
<jsp-file>tilesDispatch.jsp</jsp-file>
</servlet>
<servlet-mapping>
<servlet-name>tilesDispatch</servlet-name>
<url-pattern>/tiles/*</url-pattern>
</servlet-mapping>
Note: You may need to insert a slash before tilesDispatch.jsp in the <jsp-file> element. I am using pre-compiled JSPs, so my configuration is a little different. So if <jsp-file>tilesDispatch.jsp</jsp-file> doesn't work, try <jsp-file>/tilesDispatch.jsp</jsp-file>.
Once you have this set up, you can refer to tiles definitions using the /tiles/defName convention in your faces-config.xml. For example, if you have two tiles definitions in your tiles.xml file: tile1 and tile2, you could have something like the following in faces-config.xml:
<navigation-rule>
<from-view-id>/tiles/tile1</from-view-id>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/tiles/tile2</to-view-id>
</navigation-case>
</navigation-rule>
Note that when I have used this convention, I also have used the prefix mapping for JSF. That is, when linking to a JSF page, based on a tiles definition, from a non-JSF page, the URL would be as follows:
/faces/tiles/defName
In this case, the Faces servlet is initially invoked, which sets up the JSF environment. Then the /faces prefix is stripped off, and the remaining URL (/tiles/defName) is routed to the tilesDispatch.jsp, which strips off the /tiles/ prefix, and inserts the "defName" definition.
We are currently using this approach in a number of web apps, and it is working very reliably. I hope this helps.

Hi gimbal2,
I hope to better explain.
In my JSF code I have the next:
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:rich="http://richfaces.org/rich"
xmlns:a4j="http://richfaces.org/a4j"
xmlns:fn="http://java.sun.com/jsp/jstl/functions">
     <h:body>
          <ui:composition template="/template.xhtml">
               <ui:define name="page">
                    <h:head>
                         <h:outputStylesheet ...
                    </h:head>
                    <h:form id="form1">
                         <rich:dataTable      id="table"
                                        value="#{listBeanRequest.elements}"
                                        var="element">
     </h:body>
</html>
In the listBeanRequest class, the method getElements() has a line, Integer h = Integer.valueOf("a");, which efforts the java.lang.NumberFormatException
An in my web.xml I have:
<filter>
     <filter-name>SecurityFilter</filter-name>
     <filter-class>my.filter.SecurityFilter</filter-class>
</filter>
I'm using JSF 1.2 running on Apache Tomcat 6

Workflow Shows as 'In Progress' after Workflow has been completed.

Hello All,
I have created a custom workflow using SharePoint Designer. Within this workflow I have multiple 'approval process' tasks. In theory this was so that once the first user had approved the item then the next would be prompted to approve the item, and
so on. The users that the item must be approved by are set when the item is submitted initially.
Just so anyone reading this knows I have no formal experience/education in SharePoint workflow design, but I would like to think I know my way around SharePoint(in general) at this point.
My problem is, the company I work for is just starting out using SharePoint workflows, and from what I understand workflows that are 'In Progress' are related to server performance. I noticed today that there are 5 items in the list which
under the 'workflow status' column display that they are 'In Progress' which is entirely correct. However, when I go to -> 'List Settings' -> 'Workflow Settings' this workflow is showing 8 workflows 'In Progress'.
Thank you to anyone who is able to help me with this,
James

Hi,
According to your post, my understanding is that workflow shows as 'In Progress' after Workflow has been completed.
To send the task one by one, you can select one at a time(serial) when you select Task Process Participants.
Per my knowleadge, when you go to -> 'List Settings' -> 'Workflow Settings', it show all the workflows you associated to the list.
To see the running workflow, you need to select an item, right click the title, and then select the workflow.
However, each workflow enstance can only start once on an item. In other word, you can not start the same workflow again untill the previous one is completed.
As you said, workflow shows as 'In Progress'.
Please make sure all the users have approved the tasks.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

You have to restore the iPad in order to unlock it using these instructions.
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

HT1212 how to enable my iphone after it has been disenabled?

How to enable my iphone after it has been disabled?

You have to restore the iPad in order to unlock it using these instructions.
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

Overloads oon Powerbook G4 1.5 after song has been idle

Similar Messages

Maybe you are looking for