Overprint bar chart  (web template 3.x)

Hello All,
I would like to over print 2 bar charts (==> 2 series) in my web template.
Currently Serie 1 is displayed by bar in right and Serie 2 by bar in left.
I try to get a solution to display Serie 1 behind Serie 2.
How can I get this overprint ?
Reporting 3.x, with Bex Web Analyzer.
Thank you for your help.

Hello Andrea,
I saw a similar issue, but probably the solution is the same.
Please, check this note:  815611- "Back" function and variable screen in Web Reporting
Thank you.
Edward John

Similar Messages

  • How to do "export to excel" the web template charts

    Hi friends,
    I have a scenario that user want to do export the web template resulted output charts to excel.
    We are in WAD 3.5.so we have to write javascript code to do export reluted three charts from three queries .
    Can anybody please provide code...I  tried many codes available in SDN but nothing worked.
    Advance Thanks
    Kumar MV

    Hi Kumar ,
    Hope this doc will be helpful :
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e02729a3-34bd-2a10-6594-b618617f6d57?QuickLink=index&overridelayout=true
    some more links :
    Problem in Export bar charts to Excel
    Regards,
    Jaya

  • Problem of Chart in Web template

    hi friends,
    I  have created a chart in a web template,  however the chart is displaying the material number along with the calendar week, is it possible to have it only display the calendar week?  I also wanted to know if it is possible to insert a trend line in a chart within the Web App. Designer. guide and help me'.....
    Thanks in advance,
    Gopi
    Edited by: Gopi Nath on Oct 7, 2008 7:19 AM

    Hi Gopi,
    Dont select the Material number in the query or query view which you are using for that Chart. So that, you will be having only Calender Week followed by the Key figures which are required.
    Please let me know if you are not clear on this...
    REgards
    Gattu

  • Multiple chart items in a web template

    we have a few web templates created that have 2 pie charts.
    Each pie chart references a different Data Provider.
    If I right click on top of a single chart I can export to a .PDF but it only sends the object that I right-clicked on.
    Is there a standard button I can use in a toolbar that will allow the user to Export the entire web report to PDF, including multiple charts and anything else that is found in the Web Template?
    thank you in advance,
    Peter

    Hi Peter,
    Yes there is a standard button available that allows you to export your web items in pdf.
    Select the button web item.
    In its properties you can check out for this standard functionality.
    Right now i am not having access to system otherwise i could have told you exactly which option, but look into this Button web item's properties and you will get the download option to pdf.
    Thanks
    Dipika

  • How to include two charts in one web template

    I need to dispaly two charts which are based on same query and on characteristic 1 vs KF's and the other on characteristic 2 vs KF's in one web template.
    How can this be done?
    Thanks in advance,
    Murali.

    When you execute the query in the bex analyzer, perform th enavigation stpes to reach to your desired layout of data. Then from the Save button on the bex toolbar, choose Save > Save View Global. Give it a technical name and  a description. Then log back into the WAD and assign the view as the data provider (Note there are 2 buttons over there: One for query and the other for View)
    Hope this helps...

  • IPad not rendering WebI bar chart very well

    dear all, I have a simple webi document with a bar chart.
    in the webi, my Category Axis is "month", my Value Axis is "Sales", and region Color is "Company".
    in the webi it all looks good, but the iPad representation has a problem displaying the Companies.
    on the iPad along where the month goes (along the x axis), the companies are all grouped together, then i get each month.
    here's and example of what i mean for the month of 1/2001 and 2/2001. the letters a,b, and c, are indicative of the three companies, and the nnumbers are the sales bar colours, 1 is red, for company a, 2 is blue, for company b, and 3 is yellow, for company c, let's say.
    on the webI, each month would look similar to this
    1                         
    1 2                       1
    1 2 3                     1 2
    1 2 3                     1 2 3
    1/2001                    2/2001 (x axis)
    on the iPad, the company is displayed, on the x axis, unlike the Webi document, where the month should is, then above the company you have each months measures, in the example below you can see that the months are grouped with the company
    1
    1 1   2      
    1 1   2 2   3
    1 1   2 2   3 3
    a a   b b   c c  (x axis)
    so you see, from this, i  would get, working from left to right, company 1, month 1, 2, ...., then company b, month 1, 2, ..., then finally company c, month 1, 2, ... and so on.
    this example is rather difficult to see here, but i hope someone has encountered this problem and can advise.
    i can send screen shots so anyone, which may help.
    thanks
    g

    Hi Glen,
    not sure if i got the Example completely right - you're using the SAP BI Mobile App?
    However, according to the recent "Mobile Release Notes 4.0.1", Column Charts with multiple Dimensions are not supported yet.
    In General, the capabilities of the App are still relatively small. I Would recommend you the above mentioned Document, which contains a complete list of limitations.
    Regards,
    Bodo

  • Ranges to be fixed in web template charts

    Dear friends,
    I need a help in Web reporting.
    While we run the web reports the scale in the chart cant be fixed as because of the values in the report.
    I need the have a fixed scale for all the values.
    How to make the scales static in the web template charts?
    Could some one throw some lights on this?
    Thanks in advance
    Thanks
    Sri

    Hi Sri,
    do you mean the scale of the axis? In the WAD choose Edit Chart and go to the corresponding axis. There you can set the minimum and maximum calculation to User Defined and specify your own value.
    Best regards
    Matthias

  • Regardind web template -chart

    hi all,
    i created web templates,table and chart,while i excute that
    table is displaying but chat is not displaying
    it shows
    Diagnosis
    Internal error when communictaing with the IGS (charts).
    System response
    Internal error text: "Error opening an RFC connection."
    Procedure
    Procedure for System Administration
      Notification Number RSWWW 005 
    please help me.

    Hi Raj,
    You need the IGS (Internet Graphics Server) to be correctly setup and running to be able to see the charts. See details on these threads for setting it up and testing the IGS:
    Internal error when communictaing with the IGS (charts)
    igs test://forums.sdn.sap.com/click.jspa?searchID=6244907&messageID=611784
    https://forums.sdn.sap.com/click.jspa?searchID=6244907&messageID=4030099
    Hope this helps...

  • SP2010: Different colors for chart bars in Chart Web part with single data series?

    Hello,
    I've been asked to create a chart for visual display and summary of Status values within a SharePoint list of job positions. The list of positions includes a Status field with the only values being Open and Closed. I created a page that shows the list, and
    at the top I inserted a Chart Web part that displays two bars - one showing the number of Open positions and one showing the Closed positions. Because I was having difficulty getting the totals for each Status value to show up in the chart, I followed
    the instructions at
    http://highbrowse.wordpress.com/2012/07/04/chart-counts-from-sharepoint-lists/ and pointed my chart at the new "Status values" list - this worked well to display the sum counts for each of the two Status values in separate bars.
    This was all fine and good, except that because I am only using one data series for my chart, both of the bars (for Open and Closed) show up as the same color. I've been asked to make them different colors but cannot figure out how to do so. Can someone
    provide guidance on how I could make the two bars different colors? Thank you so much.
    cheers

    Hello,
    as far as I know, the chart web part does not have any settings to change the color of individual data points or plot data points of a series in different colors. If you only have two values in the series, you could use a pie chart instead of the column
    or bar chart. In a pie chart, the different slices have different colors.
    cheers, teylyn

  • Web Application Designer - Chart (Bar Chart) - Value description of chart

    Hi Community,
    i use the Web Application Designer in BW 3.5 to create a bar chart with the chart web item (Bar chart). Everything works fine - but in the query the values are 10.000.000  and much more. The description in the chart lokks like  10000000  - Nobody can handle this information in the chart - i could not change the values in the ODS. Is there a possibility to show only steps in 1.000.000 in the chart. In the chart description it should look like 10 and the in a text "in billion".
    Is the chart designer in the WAD possible to habdle this ? Hope you have a solution

    After applying IGS patch. It is resolved.

  • Filling Missing Dates on Chart Axis in Web Template

    Hi,
    I have a chart in a web template that uses a range of data that is organized by date.  The data does not contain every date in the range, for example:
    Record 1:   Jan 1/09
    Record 2:   Jan 14/09
    Record 3    Feb 4/09,
    Record 4:   etc
    The requirement for this chart is to display the dates on the category axis with the axis displaying all the dates between the first and the last date even if records for the dates do not exist.  This can be done in a chart in Excel, but I have not found a way to duplicate this in a BW3.5 web template.
    Our envionment is BI7 SP13, but we are still using the BW3.5 front end tools.
    Thanks,
    Mel

    Hi Mel,
    you can solve this with a structure. First entry with variable date and all others with offset.
    regards Sven

  • Web template charts

    Hi
    I am designing the web template.In template i ahve to use charts.I want to assign say cal day and revenue to that chat only.I donot want to include remaining char's and keyfig in chat.When i am execuating it is giveing all obj in chat.
    I donot want all chars and keyfigures as specified above.how can i assign required chars and keyfig to chat
    Please suggest me....
    Thanks....Bk....

    Thank you Arun....
    So i have to create one query view with what ever the char's and key fig required .and I have to assign that query view to that particular chat as data provider....right..?
    Thanks....Bk

  • Web Template Migration Error in Chart

    Hi All,
      I have a 3x web template 'TEST_3X'
      It is derived from the SAP default 3x template 0QUERY_TEMPLATE with no
      major changes/customizing. Only a picture and a data provider has been
      assigned. It works fine.
      Now I tried to migrate 'TEST_3X' to a 2004s template using the Migration tool.
      Before doing this I migrated all items using the report
      <b>'RSZW_ITEM_MIGRATION_3X_TO_70'</b>.
      At the end of the process there is this error message "Make sure that the
      3x library item <b>0ADHOC_COLUMN_CHART</b> is migrated to 2004s via the report.
      See note 832712."
       However I cross checked the item '0ADHOC_COLUMN_CHART' in table
       <b>RSZWBITMHEAD</b> (target table for migration). It exists and is active.
       It also exists in table '<b>RSZWITEM</b>' (source table for migration) and is active.
       Any suggestions. Am I missing anything?
    Thanks
    Vishno

    Yes.
    See path below.
    https://websmp208.sap-ag.de/patches
    Entry by Application Group -->
    Support Packages and Patches" --> SAP Frontend Components" --> BI ADDON FOR SAP GUI" -->  BI 7.0 ADDON FOR SAP GUI 7.10

  • Stacked Bar Chart with data from a Web Service

    Hi,
    I'm working on Dashboard Design (version 14.0.1.287) and I'm trying to create a chart linked to data from a webservice.
    With a Year in input, my webservice gives an Amount per Cities and Products
    Data retrieved look like this (Sheet1) :
    Paris          Tablets          45
    Paris          Laptops          12
    Paris          Cellulars          89
    New-York     Tablets          56
    New-York     Laptops          36
    New-York     Cellulars          1
    Londres          Tablets          150
    Londres          Laptops          3
    Londres          Cellulars          45
    Then I use a Pivot Table (created manually in Excel) looking like this (Sheet2) :
                   Tablets     Laptops     Cellulars
    Paris          45          12          89
    New-York     56          36          1
    Londres          150          3          45
    The chart is a Stacked Bar Chart plugged on the previous Pivot Table
    I create 3 series (one per Product), values (X) are set with Amount
    Category labels (Y) are set with Cities
    The goal is to have a dynamic chart (series and categories must update if a new city or a new product appears)
    So my question is : how can I set up the chart directly with data retrieved from webservice on Sheet1?
    Thx a lot !
    Nicolas
    Edited by: nicolasheurtevin on Sep 14, 2011 4:58 PM

    hi
    First thing , bad news if you are using .Net framework 1,
    just forget it, Flex 2 doesn't work well with framework 1, but 2nd,
    good news, if you want to use webservices, you'll have to make an
    array of objects on .Net Side and send it as objects to flex, i saw
    an example on the net but i can't seem to remember where, on the
    other hand,if you want to simply use, like i do, HTTPSERVICE its a
    very nice way to talk with .Net and you can see my example here
    http://flex1-for-dummies.blogspot.com
    By the way, in your code, you have a request tag , but you
    aren't requesting anything, because if you were you would have to
    make like this
    <mx:request>
    <Artist>{yourinputtext.text}</Artist>
    </mx:request>
    So if you don't have an input text, you don't need a request
    tag, only the operation.

  • Bar chart in abap web dynpro

    Hi,
    I have some data which i need to show in bar chart when I click a button.
    So, can you guide me the procedure to do so.
    Thanks and Regards
    Tenzin

    Hi Tenzin,
    If you create node in component controller, map it with view controllers (suppose there are 2 views in the application) in the application & binds data in any of the view to the context of that view, then that data becomes available everywhere i.e. 2 view controllers & 1 componentcontrollers.
    steps:
    1) create node cn_abc in component controller
    2) map it with contexts of the 2 views
    3) collect data in the internal table of type context node
    4) using following code in method of any view, bind the data to the context of that view. Then the collected data will be available in all the 3 contexts
    DATA lo_nd_cn_abc TYPE REF TO if_wd_context_node.
        DATA lo_el_cn_abc TYPE REF TO if_wd_context_element.
        DATA ls_cn_alv TYPE wd_this->element_cn_alv.
      navigate from <CONTEXT> to <CN_ALV> via lead selection
        lo_nd_cn_abc = wd_context->get_child_node( name = wd_this->wdctx_cn_abc ).
    collect data in t_abc table
        lo_nd_cn_abc->bind_table( t_abc ).
    Convert the data in string format,
    I hope you have followed all the remianing steps correctly.
    Regards,
    Saket.

Maybe you are looking for