Overprint CMYK psd without having to embed first!

Thanks!!!

What LOGICAL sense does it make to be able to overprint an image only when it's embedded? If you have no answer, don't reply.

Similar Messages

Overprint CMYK images without having to embed first

no?

Step One: Place a CMYK image.
Step Two: Embed said image.
Step Three: Overprint said image.
Now that you know it's "possible" you can spare me your lackluster intellectual idioms since it should be obvious that having to embed an image first to overprint it, is, well, very Adobe-ish. Don't become your arch-rival Stuart McCoy who was denouncing multiple artboards in Illustrator and look where that got him.

Viewing HDTV without having to capture first

Maybe someone at this forum can help me out ...
I've been trying all day to watch HDTV on my new G5 w/ 30" display. My cable box has a firewire output which I use to connect to the G5. AV/V can detect the cable box; Virtual DVHS can connect to the cable box & record .m2t videoclips.
But how can I just watch TV without having to record first??? I just want to be able to tune through channels, not playback a file saved to disk.
Just like FCP's log & capture window lets us watch a tape without having to capture. Is there an app that can playback live streams, not just recorded ones?

The box has component & DVI & USB & composite.
However the signal is some interlaced variant of HD ... it's Time Warner cable ... and so I can't use composite.
I tried hooking the monitor's DVI cable the the box, but didn't get an image. Maybe I need to also hook the monitor's USB & firewire cables to the box instead of the G5 tower?

Using pz:contentSelector without having to login first

I created a jsp page (index.jsp) which is my home page. I would
like the users to access this page without having to login first.
The problem is that if I don't login before, the pz:contentSelector
fails with a error like :
COMMERCE_SERVER_FRAMEWORK,LOG_ERROR,"Error in AdvisorBean.advise()
: Exception com.beasys...ContentSelectorAdviceRequest is missing
object : com.beasys.commerce.axiom.contact.User
How can I silently login into BEA with an anonymous profile without
having to fill any login form ?
Thanks
Marc

Hi Marc,
Check out the Anonymous Profile example, under
<wlcs-home>\server\public_html\examples\anonymousprofile.
- Ginny
"Marc DOUBLET" <[email protected]> wrote in message
news:3aa8f5a9$[email protected]..
>
I created a jsp page (index.jsp) which is my home page. I would
like the users to access this page without having to login first.
The problem is that if I don't login before, the pz:contentSelector
fails with a error like :
COMMERCE_SERVER_FRAMEWORK,LOG_ERROR,"Error in AdvisorBean.advise()
: Exception com.beasys...ContentSelectorAdviceRequest is missing
object : com.beasys.commerce.axiom.contact.User
How can I silently login into BEA with an anonymous profile without
having to fill any login form ?
Thanks
Marc

How do I open mail attachment without having to save first

I have an iMac with Maverick 10.9.2 and mail version 7.2. I am trying to switch over from my laptop to using the iMac exclusively. The laptop mail version is 4.6. In that version, when I receive an email with an attachment, there's a little icon of the attachment that I can just click on and open it. In the new version (7.2), there's no little icon. Instead, if i click on the attachment, it just shows a file name and I'm forced to choose to "save as" before I can open it. Is there a way to set up my preferences so i can see the icon and click to open without saving?
Thanks!

Open a message that contains attachments.
Then hover your mouse over that line that separates the body of the message from the "To, From, Subject Line." On that line in the center, you are given a few options. Trash, Reply, Forward, and the attachments. Click on the attachments and down at the bottom of that list. You can select the "Quick Look". With the list, you can click on each attachment directly and given an option to download it.
KOT

What is the fix to get pdf attachments in emails to open without having to save first?

I received a new machine and now when I get an email with a pdf attachment I have to save it first before I can open it. How can I fix that? Thanks

The fix will be to your email setup, or browser, or something like that. Can't always be fixed.
So, how do you read your email?
What app do you use?
If it's a browser, who provides your email?
What happens when you try to open the PDF attached to emails?

Is there a way of inserting a video without having to embed code or publish to adobe.

Im trying to create websites with classes of year 9 - 10 students. I just want them to crewate a web page/site where they can insert short videos and animations that they have created as part of a portfolio of work.
I dont want to have to embed code from you tube as some students who may appear in the videos may not have the required media clearances etc.
I am looking for a widget maybe that I can insert the video into.
I am not sure about the uploading of videos to adobe when we publish.
I am just chasing something really simple and easy.
It sort of seems that it would actually be easier to create pages in dreamweaver?

Hello,
Are you talking about inserting a local video file in Muse site. If yes then try the steps below:
1. Import Video to Asset tab
Go to File > Add Files to upload and select the file that you want to import. This will copy the file in asset tab in muse.
2. Insert HTML code :
     a. Go to the page on which you want to place the video.
     b. Go to Object > Insert HTML
     c. Paste the code mentioned below and update the <filename> with your file name
<video width="320" height="240" controls>
   <source src="asset/<Filename>.mp4" type="video/mp4">
</video>
Hope this will help you what you desire to achieve.
Regards
Vivek

How can i backup my iPod Touch 4g and save my apps onto a new hard drive without having to save onto the current hard drive first?

How can i backup my iPod Touch 4g and save my apps onto a new hard drive without having to save onto the current hard drive first?
My current hard drive is filled up and i'm going to buy a new, bigger hard drive. How can i change the save and backup destination for iTunes so i can backup and transfer my purchases(apps) onto the new hard drive? Without having to backup and save my apps onto the current hard drive because there's no space left on it. Thanks!

have you tried following the steps given here on the apple's knowledge base site may be they can help you
http://support.apple.com/kb/HT1414
here is a video from youtube as well
http://www.youtube.com/watch?v=wH_1qkHkZi0
also this tutorial
http://www.imore.com/how-to-setup-backup-restore-update-use-icloud

Is there some way of getting adobe to work without having to download a document first, then adobe will show the pages.

Hello,
I am trying to find out what I can do, to get adobe to open up a pdf file so that I can read all pages, without having to download the document first. I get the first page only; then I download and have access to all pages. Then I delete. Seems like such a long process. Is there another way? Do I need to download a different adobe?
Thanks for your help.

How are you seeing your document on iCloud from your laptop? Web browser, or OS X Pages open dialog?
If you have MS Word or .pages formatted files parked on iCloud, the web interface will not permit their download as PDF, and in fact, PDF is an inactive option in that download menu for these word processing files. There is no copy facility available, but duplicate functionality exists from the iWork category within the iCloud web presence.
If you have Pages v4.2 or later installed on your (assumption: Mac) laptop, launch Pages and in the open file dialog, select iCloud on the dialog toolbar. Now, press and hold the option key as you drag and drop a copy of our document from iCloud to your desktop. The reverse works also.
See if you can open that document on your laptop now.

Can I add a second plot to an XY graph without having to re-draw the first?

Hi,
I'm trying to figure out a way to add a second plot (a linear fit between 2 cursors) to an XY graph without having to redraw the first plot (the underlying data). The reason this is important is that the first plot is typically hundreds of thousands of data points (or more), and it is slow to redraw. I would like the user to be able to move cursors around and dynamically do a linear fit to the underlying data in the range between the two cursors, with the line being drawn as the second plot.
My current program just wires both plots to the graph and re-draws both. This ends up being quite slow.
Ken

Here's a quick draft how you could draw the regression line (LabVIEW 8.2). Modify as needed.
Message Edited by altenbach on 10-28-2007 12:51 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
DrawRegression.png ‏28 KB
PlotLine.vi ‏46 KB

When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

Go to Settings>General>Passcode Lock>tap Turn Passcode Lock Off, enter your "pin".
Edit: Are you saying you are getting a prompt for your email pin, or are you talking about the passcode lock that appears when you turn the phone on?

I want to open a document in a link without having to save it first.

When reading an email or looking at a web page I always have to save a document before I can open it. I used to be able to click on the link and was given the option to open or save the file. I no longer get the option. I do not want to save all these things to my computer first. How can I get the option to open a document whose link I have clicked on without having to save it first?

Just be sure that feature is enabled first.
Settings / General / Keyboard / Enable Caps Lock.
When capslocked, the arrow turns blue.

How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view

How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder?

SamanthaR22 wrote:
How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder? [Emphasis added.]
The digitization of data has introduced a complexity to our interactions with it that we continue to struggle with. "Picture" and "Photo" now mean different things in different contexts. In this case (and in general) defining our terms clearly is the first step towards understanding what we are trying to do. Understanding is the path that allows us to do it.
All pedantic, but please stick with me here .
You record a set of instantaneous data with a camera.
That data is processed by your camera and saved to a file.
The file format is usually either RAW or JPG.
You transfer those files to your computer, and you import them into the program Aperture (often in one operation).
From each camera-file imported, Aperture creates a record in its database (called, imho unhelpfully, a Library) and an Image that you see in the Aperture Browser and Viewer.
Aperture links the Image and the imported file.
The imported file is called, within Aperture, an Original.
Every Image has an Original.
The Image is not the Original. The Image is what you see in Aperture.
The Original is a file that is stored on your computer.
You can make changes to an Image.
Aperture calls these changes Adjustments.
Adjustments are saved to another file attached to the record in the database. Let's call this file the Changes File.
Aperture uses these two files attached to the record in the database to create the Image.
Image = Original + Changes File.
The Image is not a file.
Because the Image is not a file, it cannot be shared with other programs. It exists only inside of Aperture.
In order to share an Image with another program, you must first create a file of the Image.
You do this by exporting Images ("File ▹ Export ▹ Version" is the command in Aperture; should be, imho, "File ▹ Export ▹ Image").
You may ask, "Why all the complexity? Why doesn't Aperture save Images as files?" The answer is simple: Images can require less — and in many cases very very much less — storage space than files of Images. Rather than save a full-size file for every Image, Aperture saves only instructions on how to make that full-size file. The gain in storage efficiency is huge. The trade-off is that although your Images are always available to be made into share-able files, you must create those files when needed (which you do by exporting selected Images).
Here is your question reworded with more precise terms:
SamanthaR22 might have written:
How do I access Images in my Aperture Library in the Finder? I would like I be able to select files in the Finder when I am making photo books online without having to create them by exporting Images from Aperture into a new Finder folder. Is there any way to view and download my Images directly from the Finder?
No, there is not. Images exist only in Aperture, and are not accessible for use in other programs. You must create, for each Image in your Aperture Library, a new file outside of your Aperture Library in order to use it with another program.
Aperture does allow you to create and save within your Library share-able files of your Images. These files are called Previews. You specify the file parameters in Aperture Preferences on the Previews tab. These files are available to other programs via the OS X Media Browser. These files are what you get when you drag selected Images out of the Aperture program and drop them on another program or on your desktop (which is part of the Finder).
HTH.
—Kirby.

I want to be able to open my favorite bookmarks without having to open firefox first

When I had IE 9 I could send my favorites to a "tab" in the lower right hand corner called Links and I could open any one of my favorites without opening IE first. When I want to open a favorite bookmark from Firefox, I have to open Firefox first. Is there a way to save bookmarks without having to open the webpage first?

The usual method may be to open Firefox with certain favourites as homepages, or to open Firefox with the tabs from the last session. It may be unusual to have 20-30 pages as a homepage. There may be some limit to the string length but you could try it.
*[[How to set the home page]]
Once Firefox is open you may also choose to open any folder in the bookmarks library and use the option open all tabs. If you wanted you could also open Firefox directly into the library as a tab.
* use ''chrome://browser/content/places/places.xul''
Additionally note that firefox handles tab groups (I seem to recall development of this feature has stopped and it may be replaced in the future)
* [[Use Tab Groups to organize a lot of tabs]]
*[[Mastering the Tab Group Editor]]
If you do use tab groups please note they are not too robust. You could loose the sessions, it is a good idea to bookmark important tabs.
Another workaround may be to use a document containing a list of the required links and open that document or a link from it with Firefox. I am not sure if there are any add-ons that do what you require, you could have a look.

Me to open a webpage document without having to save it first?

How can i change my settings in google chrome to open a googled page (that is a pdf.ppt) without having to save it first to my machine?

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Peter

Overprint CMYK psd without having to embed first!

Similar Messages

Maybe you are looking for