Overprint Preview and Workspace are set to the same, but look different
I'm working for something to be viewed on a screen, so I work in the sRGB IEC61966-2.1 (Edit > Color Setting > Working Spaces - RGB: sRGB IEC61966-2.1 ). I have set the Overprint Preview to the sRGB IEC61966-2.1 as well (View > Proof Setup > Device to simulate : sRGB IEC61966-2.1). But when I tick Overprint Preview the colors look completly different. Why?
Thanks, Andi
Maybe you are right and it doesn't make much sense to use the Overprint Preview in this case. I think what happens is, when you tick Overprint Preview, ID converts from your actual RGB-Color Space to a set CMYK-Color Space and back to the old RGB-Color Space (if set to the same one). On it's way the colors change through it's conversion from RGB to CMYK and back to RGB. That could explain it.
Thanks a million, Andi
Similar Messages
-
I keep everything on 1 External USB3 HD so that I can pug it into my Mac at home or my PC at work and just keep working without syncing anything to the local machine. So is there any benefit with Smart Previews in this case? I heard somewhere that it might make the Develop module a little quicker, but is this only when using the Smart Preview and not the full res image?
Lr uses smart previews instead of ACR cache for initial develop-module view when photos are online - amount of benefit is, in my experience, very minor (not noticeable without using a stop-watch..).
But if photos are offline, you may experience more substantial savings.
Note: smart previews are reduced resolution - smart previews of raw files are 2560 x (say) 1920, so if your original raws were say 5120 x 3840, then you/Lr are dealing with 1/4 the number of pixels when editing via smart previews.
Anyway, if you are willing to give up zoom for one edit pass, you can resize the smart previews so 1:1 fits in your allotted display space (e.g. 1280 x 960, which would be 1/8 number of pixels..), e.g. using the PreviewExporter plugin - then things may be significantly faster in develop module. PreviewExporter also has a feature to take originals offline, and put them back online.
To be clear: the amount of savings may or may not be dramatic - how much there is depends on your system, size of raw vs. smart preview image, number and type of edits applied, etc..
Why don't you try it and tell us what you think?!
Cheers,
Rob -
I've done everything I know in order to get my calendar in iCloud synchronized with my macBook, my IPad and my iPhone, but get no success. I've checked if all devices are set to the same account. Can you help me?
The only thing I can see strange is that when I login my iCloud account through my principal email address, when I check my preferences is marked an @me.com address that is old and I don't use it anymore, but I can't erase it or even change it.
-
Applw TV cannot "see" my computer even though I have verified that both are set to the same home sharing account. The router works OK as Netflix comes through as does access to music.
Welcome to the Apple Community.
The following article(s) may help you.
Troubleshooting Homesharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings -
Hello !! Because if I talk daily to the same Person for FaceTime and two are always in the same place, once day face time no prolem speak for another day and I have to use skype for error appearing face time ? Thanks for your answers.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom -
my iphone and ipad are giving me the same message when I tap the mail icon. "Password Missing Enter the password for the account" When I enter my password, I get another message saying " The operation couldn't be completed (MFMessage Error Domain error 1032) I need help fixing it.
Hi Pjcox4,
Thanks for visiting Apple Support Communities.
The steps in this article can help resolve various troubles with accessing mail accounts:
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
If you get to step 5 in the above article, this one is a good reminder for how to set up your mail account again:
iOS: Setting up an email account
http://support.apple.com/kb/ht4810
Best,
Jeremy -
I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?
Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer. -
I am doing two calendars. In one I am able to load 7 pictures, but in the other I am only aloud to load 5, My settings are set exactly the same for both.
Any ideas?What happens when you try to load the photos into the second calendar? What iPhoto version? What system version?
OT -
I have two networks one each in two cities. Both are named the same but require different passwords. I am at my second location and cannot connect to this wifi network. How do I delet one network so I can connect to my second network?
Just go to the wireless network preferences and empty out all the stored wireless networks.. then scan and connect to the local wireless.
Select them and tap the - button below it.
Once they are emptied out.. it might be good to reboot the computer with the remember networks unchecked.
Start with a clean slate. -
Can you have more than one apple id on a computer. We are going away and want to facetime from our macpro to the mac computer at home but both are registered under the same apple ID. What should we do ?
I will share with you what I have done to manage this with my family. While the solution isn't without flawes, it seems to do the trick. First, you need to have one person who is managing the synching of everyone's devices. In my family, I have three iphones, about to be four, and five ipads. We all synch to the same apple ID to allow one another to take seemless advantage of our Itunes, which is on our Imac. To synch individual music or video interests, we simply select which playlists we want and manually synch that way. A couple of us use imatch and the cloud to make the entire library accessable as well. With respect to the imessage, mail, contacts, etc. we each have a gmail account for our individual emails, contacts etc. So for instance, my forth grade daughter has a gmail account that we choose to synch her contacts, calendar, etc to and then that is also the account where she receives her imessages from on her ipad and itouch. My son, who has an iphone and ipad, does the same thing, but under settings, he goes to imessage and checks his phone number and his email as his preferred way to receive imessages and texts. My wife and I do the same thing. To avoid having everyone see one anothers contracts etc, we only synch contacts from our individual email accounts. Here is the downfall to this: When you update your phone or add a new device, apple always wants to reset everyone's facetime and imessage settings and then low and behold we are all receiving imessages from one another's friends etc. To work around this, I simply take each of their devices and go to their imessage settings and only check the email and phone numbers relative to their devices. I dont' know is this is the best solution, but it seems to work for us.
-
My kids are using 4 different ipods with the same itunes/apple account, Is there something I can for them to use facetime/imessages withouth seeing eachothers messages? I mean set up different accounts for messages?
- Create a NEW account using these instructions for each user. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
- Us the new ID for Settings>FaceTime and Settings>Messags>Send and Receive and Settings>iCloud. Continue to use the common ID for Settings>iTuns and App Stores. -
Can't send mail from iPad but IPhone is sending. Outgoing servers are set up exactly the same. I closed both safari and mail on the iPhone to try and avoid conflicts with iPad. I also shut down and restarted iPad. Still won't send.
Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
Edge and Next are good for the corporations but are they good for the consumer?
Ok so I have never paid full price upfront for a phone! Ever since my first phone from VoiceStream I have opted for what ever phone was "free" because way back then (I blush as I type) I actually thought the phone was "free!!!" Ah, to be naive again!! But as we all know the phones never were nor will they ever be free.
However I say programs like Verizon's Edge and AT&T's Next are good for the corporation if they weren't they would not exist. The first reason I say this is because Edge and Next allow the cellular service provider to easily recoup the entire cost of the phone in a clear way unlike with subsidized phones that muddy the profit water. For example, the Verizon 64GB iPhone 5s retails for $849.99, currently with a two year contract you pay $399.99 for that 64GB iPhone 5s. The EFT for that phone is $350 (minus $10 per month of post paid service). If you on the 15th the day after you got your phone you paid the EFT but kept service you only paid $749.99 for that $849.99. Sure you still pay for service but you can leave when ever and Verizon cannot say hey you owe us $100 more for you phone. Its yours and they can't take it back and the only way Verizon will get that $100 back is though another customer that subsidized a much lower cost phone that at the completion of that contract Verizon will more than recoup the cost of that lower priced unit. To top that off you could turn around and sell the phone for $800 go back to Verizon or another provider buy a $450 phone and break even. I'm not suggesting that people do that or that it may prove to be a big hassle for some that went through all the trouble. Its just a point to show that subsidized phones make the profits less clear for the service provider to see at first glance.
Second reason these programs are good for the corporation is they allow the service providers to get a better grasp on the true cost of maintaining their networks and providing us the consumer access to their networks. Third reason it good for the corporation is the people that feel the need to upgrade every six months to a year are required to pay at least 50% of the retail cost of the phone at the same time they must surrender that device in exchange for the new device. So the service provider then has the phone refurbished certified to be in "like new condition" and sell it again potentially making more than retail cost when the profits of both sales of the same handset are factored together.
That being said what will the impact of programs like Edge and Next have on cost of future cellular service plans and smartphones? Over time will the service provider give us the best per line access fee (not likely but maybe)? Or will people upgrading their smartphones at faster intervals cause the cost of the smartphones to drop over time? What are your thoughts?Go to the link I provided and click on "Check upgrade eligibility"
-
Ok so each character rolled with my app gets saved as an html file in a folder i create on the sdcard called RpgApp
the code to do this is
private async Task saveToHtmlCharacter(string name)
StorageFolder externalDevices = Windows.Storage.KnownFolders.RemovableDevices;
StorageFolder sdcard = (await externalDevices.GetFoldersAsync()).FirstOrDefault(); //Windows.Storage.ApplicationData.Current.LocalFolder;
var dataFolder = await sdcard.CreateFolderAsync("RpgApp",
CreationCollisionOption.OpenIfExists);
var file = await dataFolder.CreateFileAsync(name+".html",
CreationCollisionOption.ReplaceExisting);
using (StreamWriter writer = new StreamWriter(await file.OpenStreamForWriteAsync()))
writer.WriteLine("<html><head><title>Character File for " + z.charNameFirst + " " + z.charNameSecond + "</title></head><body>");
//trimed for the post
now this as i say works perfectly and i can confirm that the files show up in the "RpgApp"folder
now the next step is to have the app read the names of each of those html files and create a seperate button for each one named for the filename and with the filename as content (later i will link them up to load the html file they are named for in a webbrowser
panal)
here is the code that *should* do that
private async Task readFiles()
z.test.Clear();
StorageFolder externalDevices = Windows.Storage.KnownFolders.RemovableDevices;
StorageFolder folder = (await externalDevices.GetFolderAsync("RpgApp"));
IReadOnlyList<StorageFile> fileList = await folder.GetFilesAsync();
//z.test.Add("dummy");
foreach (StorageFile file in fileList)
z.test.Add(file.Name);
public async void buttonTest()
await readFiles();
CoreDispatcher dispatcher = CoreWindow.GetForCurrentThread().Dispatcher;
await dispatcher.RunAsync(CoreDispatcherPriority.Normal, () =>
foreach (string name in z.test)
Button button1 = new Button();
button1.Height = 75;
button1.Content = name;
button1.Name = name;
testStackPanal.Children.Add(button1);
now i say should as what i get is an error of "A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.ni.dll" (2 of them in fact one after another)
more detailed error is at http://pastebin.com/3hBaZLQ9
now i went through checking line after line to find the error and line that causes it is:
StorageFolder folder = (await externalDevices.GetFolderAsync("RpgApp"));
in the readFiles method
i checked to make sure the case is right etc and its spot on, that IS the folder name, and remember my app creates that folder and creates the files that are inside that folder (and only files my app creates are in that folder) so it should have access
im 100% stuck its taken me all day to get the files to save and now i cant get them to list correctly
I have tested the button creation function with fake list data and that worked fine, as i say the error is when i tell it to look at the folder it created
all help most greatfully recievedthis was actually solved for me on another forum thread
async Task<bool> continueToReadAllFiles(StorageFolder folder)
if (folder == null)
return false;
if (folder.Name.Equals("RpgApp", StringComparison.CurrentCultureIgnoreCase))
var files = await folder.GetFilesAsync();
foreach (var file in files)
test.Add(file.Name);
return false;
var folders = await folder.GetFoldersAsync();
foreach (var child in folders)
if (!await continueToReadAllFiles(child))
return false;
return true;
public async void buttonTest()
test.Clear();
StorageFolder externalDevices = Windows.Storage.KnownFolders.RemovableDevices;
var folders = await externalDevices.GetFoldersAsync();
foreach (var folder in folders)
if (!await continueToReadAllFiles(folder))
break;
//.... commented out
...now i say solved this is more a workaround...but it works.
I would love to know why we cant just scan the RpgApp folder instead of having to scan the whole dc card and disregard all thats not in the RpgApp folder -
Preview and Generate view not displaying the same as design view
RoboHelp HTML Ver 8.0.2.208.
Hi all,
I have a topic that will not generate or preview what is displayed in the design view.
The topic is a table that uses a different image as the background for each cell (from the CSS).
The background images display fine in design view but will not display when previewed or generated. Everything else is displayed but not the backgrounds.
Any ideas.
Thanks
WowroninYou have this -
</head>
<script>
<!--
function msgopen(url, name, w, h)
w += 32;
h += 96;
var win = window.open(url,
name,
'width=' + w + ', height=' + h + ', ' +
'location=no, menubar=no, ' +
'status=no, toolbar=no, scrollbars=yes, resizable=yes,screenX=2,screenY=2,left=100,top=100,');
win.resizeTo(w, h);
win.focus();
// -->
</script>
<style type="text/css">
#preloader {
position: absolute;
top: 0;
left: 0;
right: 0;
bottom: 0;
background-color: #fefefe;
z-index: 99;
height: 100%;
#status {
width: 200px;
height: 200px;
position: absolute;
left: 50%;
top: 50%;
background-image: url(ajax-loader.gif);
background-repeat: no-repeat;
background-position: center;
margin: -100px 0 0 -100px;
</style>
<body>
In other words, you have a script block AND a CSS block between </head> and <body>. That's invalid code. Move it to where it belongs inside the <head> region. You could have found this in an instant by checking the page here - http://validator.w3.org.
Maybe you are looking for
-
5 Essential Accessories for Beginner Guitar Players
April is International Guitar Month and the perfect time to finally pick up a guitar like you've always wanted to. If you're looking at picking up a guitar to learn how to play, there are a couple of other items that you'll want to make sure you cons
-
I'm using pages 4.2, and in the App store it shows there are no updates. However in the App store when I select Pages it shows Install (where you would buy), when I click this it shows: We could not complete your purchase. Pages is already installed
-
In previous versions of Max OS and OS X, when the user sets a preferred view for a folder, the view was "sticky." I didn't change whenever i navigate to the folder. However in Leopard (up to 10.5.3), pressing the back button will change the view of t
-
Should I install my Leopard now or wait a few more weeks for an update
Realizing that no one posts to these boards UNLESS they have a problem, I still am wondering if it is smart to wait a few weeks for an update or two. What do the experienced folks here think? I am running my back up as I write so will be ready to go
-
Siebel UCM Merge Serivce Error
Hi, I have UCM Process Merge Request Workflow exposed as web serivce. and when i tried to invoking this web service passing all requied(ReuestId,Match Id and SurvivorId and ObejcteType)values i am getting below error. "Method 'WriteRecord' of busines