Override Ethernet to Use Airport Card for Internet

I just installed an Airport card in G4 Quicksilver 2002.
I want to use a separate (not on my network) Linksys wireless airport to go on the internet,
But as long as my ethernet is connected to the G4, my internet goes out my ethernet.
Is there a way to force my internet connection to use the Linksys wireless (without unhooking my ethernet cable)?
Also, is there a way to be using the Linksys wireless on the internet, and make my HP 4001n print through my ethernet?

You can try changed the order of the network ports in the Network preferences Network Port Configurations screen. If you drag the Airport configuration to the top of the list it is supposed to become the first priority port.
You can also shut off the ethernet port from this pane without actually disconnecting the cable.

Similar Messages

Use Airport Express as Internet hub, bridge Time Capsule for N-only?

OK I checked on the forums, but I could not find anything quite specific it what I was trying to accomplish.
I recently got a 500GB Time Capsule. I changed my network around, which was based off of two Airport Express stations – on in the office hooked up to internet & printer, one in living room hooked up to sound system – and made the TC the main hub, connecting modem to it's WAN port and bridging the office AX via LAN port in bridged mode, sharing the living room AX as WDS. This way, I had the TC in N-only mode in 5ghz spectrum using wide channels for fastest performance. All this worked well.
Except that I noticed that with the TC in the office – where the laptops rarely are – my data transfer speeds were no better than .11g speeds. So I mucked around a little, and noticed that it really was just the case that the separation of distance & obstruction was slowing the transfer speeds over .11n-only that much!
Well, it occurred to me that there may be another way. What I had intended to do was to hook up the modem back to the office AX, move the TC to the living room where it'd be "line of sight" to the laptops most of the time, and bridge the TC and living room AX over LAN. So the idea was to keep the networks separate wirelessly still, and have the internet "bridged" wirelessly from the office AX to the living room AX and then over LAN to the TC. The thinking was that the hit on the internet connection would not be noticeable as the threshold for that is well below the streaming capabilities of the AX network still, so I'd not lose anything there, but gain MUCH faster speeds with the TC in line-of-sight of the Laptops (3x as much in testing; with TC in office and laptops in living room, 1.3gb folder took 9 minutes, same folder line-of-sight testing took only 3 minutes).
However, I CANNOT get this to work properly. I thought I really just needed to move the TC to the living room and bridge it there, as the services should be shared over the LAN port since the 2.4ghz AX are in "bridged" mode, but that didn't work. I kinda-sorta got it to work by forcing both the AX network AND the TC network into "bridged mode," but that didn't seem right or wise, so I tried some other settings, putting the TC to bridged and having the office AX distribute IP addresses, but then it wouldn't show up under restart, and I'm just confused now on how to set that up!
What i need is: To have the "Office AX" hooked up to the modem & printer, on 2.4ghz since it's the older .11g model, with the "Living Room AX" on that same network. Then the TC in 5ghz N-only bridged to the Living Room AX via LAN, so it can share the services (internet & airtunes) and still get high data transfer speeds to the laptops via the advantage of Line-of-sight, non-obstructed networking.
How do I need to set this up? It's possible, right?
Message was edited by: Anthony Caltabiano

OK while I was working out this morning, I was trying to think of WHY my setup wasn't working. I had an epiphany, and decided to try once more. This time, it worked.
The problem was that originally I had the Living Room AX set up as a Remote, so it was hooking INTO the network, not extending it. I know that with that setup you can't hook up to THAT station and get internet or anything, you hook into the MAIN station and you can SEE the remote's services that are "plugged in" to it.
I didn't think this would be an issue with the TC physically attached to the ethernet port, but apparently this behavior extends to the ethernet port on remote stations for internet access... I had a feeling that MIGHT be it, so I started from scratch, and this time set up the Living Room AX to extend the network instead of just joining it. Then hooking up the TC to the Living Room AX's ethernet port and selecting "Bridge Mode" on the TC got me the good ol' green light!
So, if anyone out there is trying to build a dual-band network, with their TC on .11n-only and bridge to services supplied by a 2.4ghz network, AND route their internet access through the 2.4ghz network instead of the TC so that they can keep their TC more centrally located for better performance... make sure you do it like this: Set up the alternate (2.4ghz) network as relays, "extending" the network, so that when you plug into it, the TC essentially thinks it's plugged directly into the main router, no matter where it is. The throughput hit for internet access over WDS shouldn't be a problem for US-based peeps, as our speeds are typically well below the .11g threshold anyway.
I also found that it helped to NOT hide the SSID of the 2.4ghz network; doing that kept rendering failed attempts to force the secondary AX to join as WDS. Once I redid it without hiding the SSID, all went well.

Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?

Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?

As far as I know, the Airport Express only transmits sounds via Itunes. So every other sound (internet, but also incoming mail) will be coming out of your mac instead of your external speakers.

√using successfully airport express for internet/ when hooking up new airport extreme light glows green, but does NOT appear in devices seen????airport wifi devices

using sucessfully airport express for internet
when hooking up new airport extreme light glows green, but does NOT appear in devices sesn in 5.6 airport wifi devices
wanting to use extreme at base and express in another part of the house

How is the express getting internet? What modem is it plugged into?
How is the extreme setup? New extreme cannot be setup with 5.6 utility.. you must use latest 6.3. Which also means you cannot setup from computer using less than Lion .. or you must use iOS with latest utility but it has limited configuration cf the computer version.
IPv6 is also needed.. turn on local link.

What is needed to network 2 computers using Airport card

I know I need an airport card in my eMac, but is there any other cards that have to be in the computer? I want to network my eMac with an iMac using a DSL line. The eMac will be downstairs and the iMac will be upstairs. I'm waiting for delivery from Apple of the iMac. It has everything built in that is needed to network but my eMac doesn't. To make my eMac wireless is all I have to buy is an Airport Card and a Wireless Gateway for the iMac which is the computer connected to the DSL modem and Wireless USB adapter with connects to the eMac? What type of Airport Card do I need to buy for my eMac (model #'s etc.) It is the card that inserts above the super drive in the front of the computer. Is there any software that is needed to install Airport?

I am also doing some configuration changes (we have one Imac and two eMac's)
but one eMac does not have a airport card and is hardwired (ethernet) to the high speed cable modem then a apple airport. One Imac and the Emac with a airport card work fine, it is a bit tricky finding the correct airport card (or airport extreme card if you have a ATI graphics card (use about the mac/system profiler then click on more to see if you have a graphics card (which affects which airport card you need, there are alot of resellers on the net so you should find what you want.
If in doubt there is a free program mactracker which provides data on every mac made (available off off versiontracker.com (free site just register) it will guide
you on the type of card needed. I was quite amazed at the amount of different spec eMac's made in their relativealy short history.
Macwireless.com does sell eMac cards (for two models) but also antenna type
or flash drive appearing USB based wireless connectors that may help.
I found the mactracker program helpful (alot) as alot of web sites provide some vague info and I would hate to se you get stuck with a non returnable card.
The actual card install does not look hard (its done through the cd rom drive door.
I am not sure why we did not get a airport card for ours when we bought it.
Wish I did as it would have saved some $ (maybe) and surf time making sure I find the right one.
We did have a antenna wireless antenna for a "green" Imac (long gone) and it ran on OS9 but it was finicky when we had the airport base station upstairs
and the Imac and antenna in the basement (about 50-75 feet)
Best of luck
Hope this helps, I am not a expert, the serial number on the cd drawer will
nail down the model you have and what you need.
We have been working adding a laser printer and airport express and the two macs with cards work fine but the Emac with no card can not be set up yet. The laser printer will sure save on ink!

Airport card for my g4 adp tower... I can't get it to work.

I'm not very good with computers (when it comes to technical support). And I recently purchased an original airport card for my computer. I also burned the downloads onto a disc so that I would have the software. My computer has an operating system of 10.3.5. I downloaded the driver, turned off my computer, insterted the card and it pops up with an error that says it can't find the airport base station. What is this and do I need to buy something else for my computer? My internet connection is Comcast wireless. Any suggestions, thoughts or opinions would be greatly appreciated. Thanks for taking the time to read through a computer illiterates post...

It sounds like you are trying to run either the Airport Setup Assistant or the Airport Admin Utility - and since this software is only of use to Airport Base Station owners (which you are not) this software is of no use to you.
If your Airport card has been properly installed, you will see a fan-shaped icon near the right side of the MacOS menu bar - that is the Airport menu. Click on it, and a list of all in-range wireless networks will appear. The name of the wireless router supplied by Comcast should appear there - click on that name to connect to it. With some luck you will now get an internet connection.
If there are no wireless networks displayed when you click on the Airport menu, recheck the installation of your Airport card - you probably forgot to attach the internal Airport antenna cable to its connector on the Airport card.

Airport card for powerbook G4 12" Aluminum

I have a powerbook G4 12" aluminum and I have looked everywhere for an airport card. I have gotten two original airport cards and they did not fit,these cards are just a smidge too wide for the card slot. I know there is an apple card that will fit it because it had one installed at one point. I do recall a comment that there was a "small" airport card for the 12" aluminum but I have had no success in locating one. Can someone please help?

Yes, you could, but sometimes those people charge more than Apple does for its refurbished ones. And Apple's comes with a one-year warranty, while the eBay people usually don't, unless it's an eBay storefront seller. (Whatever they're called).
So, use your best judgment. Coming from me who buys things on eBay a lot, I'm not saying eBay is bad. But just comparing the two ($29 with a one-year warranty and straight from Apple, versus whatever price on eBay, same/higher/less than Apple's price, but possibly without warranty, etc., in this case, Apple would be the best bet).
The Apple Store (U.S.) - Refurbished AirPort Extreme Card
Message was edited by: Pismo 900
Just looked over at eBay and did a search for "Airport Extreme Card" and the prices for Buy It Now range from $24.00 to $40.00. Current bids for those that are bid-only range from $0.99 to $18.00. So $29 from Apple isn't bad at all. (I do not work for Apple, by the way).

Dual Connection; Force use of Wireless for Internet, Wired for Networking

Hello,
I have 2 connections at work: 1) ethernet to our local server/network/internet, and 2) wireless internet (through my phone's hotspot). Our connection is very spotty through our network right now, so I want to use my
wifi for internet and the wired to network only.
I've tried manually entering the priorities in the adapter metrics (5 for the wifi and 15 for the ethernet). They still show 9 for wifi and 10 for ethernet as before (netstat -r).
I also found in another forum where to change the connection orders in Advanced Settings (Change adapter settings>Alt>Advanced>Advanced Settings, then move order).
Niether of these solutions have worked. I have to physically unplug my ethernet to get it to use the wireless connection. Webpages will sit there forever and then only half load or not even at all, but when I unplug and hit refresh, they pop right up.
Any help is appreciated

Hi,
The adapter metrics should work. Please take a try to modify the metrics on both of the two adapters, and then recreate the two connections.
Here are some links for reference:
An explanation of the Automatic Metric feature for Internet Protocol routes
Windows Prefers Wired Connections
Best regards
Michael Shao
TechNet Community Support

Is airport express for internet alone?

i am connected to my university's network.. i use not only for internet access but also to access the lan etc.. will i still be able to do all this using airport express? or is it strictly for internet access..

If you configure it as a wireless access point you will be able to access the internet and the LAN.
iFelix

What airport card for MDD

I haven't looked inside, but do I need the old airport card for my MDD SP 1.25? I think it does not accept an extreme card....thought I read that only the models with 800 fw will work with the extreme card.
If anyone can confirm this, I'd appreciate it.....thanks

The Motorola WPCI810G 802.11g Wireless PCI Adapter is what I use and it works great in 10.3.9 with Airport Software 4.1, updating to the latest 4.2 Airport Software will "break" it. Then I believe there was a 4.3 update that claimed to fix the cards that were broken by the 4.2 update but it didn't take.
This happened to me but luckily I just reverted to a cloned copy of my system that had 4.1 on it.
I do vaguely recall it working in 10.3.7 but I'm not 100% sure on that.
Hope this helps.

Which Airport Card for a Power MAC G4 w/400mhz?

Hello Everyone!
Sorry to be a bother but I'm new to the forum & need some help. I'm currently upgrading my Power Mac G4 w/400 mhz & I'm looking to go wireless. I've been looking for the best product to do this but I've become a bit confused. Did Apple make an airport card for my particular model? When I go into the specs, it shows that the system is airport compatible but I do not know which component to use. Can anyone help me out with this one?
Thanks,
Rick
Bronx, NY

Did Apple make an airport card for my particular model?
That computer takes the original AirPort card or a PCI card or external component which provides wireless access. The AirPort Extreme card is incompatible with it.
(43179)

HT2731 i used debit card for purchasing i dont have credit card now its showing your payment method is decline use another payment method what shoul i do i dont have credit card

i used debit card for purchasing i dont have credit card now its showing your payment method is decline use another payment method what should i do i dont have credit card or any another account

I don't think that debit cards are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined. You could try contacting iTunes support and see if they can help, but I don't think you will be able to use a debit card : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
Are iTunes gift cards available in your country ? They are not available in all, and they are country-specific (they can only be used in their country of issue), but if there you could possibly use them as your payment method.

Can I use debit card for purchasing from iTunes in India?

Can I use debit card for purchasing from iTunes in India?

Hi
There is a small discussion that iTunes takes debit card with a Visa/Mastercard logo. I have no idea what the banking rules are in India. But this may another option to try.
https://discussions.apple.com/thread/3658843?start=0&tstart=0
Cheers

Using Smart Cards for SSPR

I'm working on ForeFront Identity Manager 2010. I'd like to enable AD users to use Smart Cards to reset their passwords. I watched this video www.youtube.com/watch?v=b4aGLnZHZN4. From this video (minute 2), it's said that we could use smart cards to authenticate
to Self-service Password Reset instead of Q/A gate.
I looked at ForeFront Identity Manager Portal but I couldn't find where to configure to use Smart Cards for this purpose. I only found "SMS authentication gate" and "Question and Answer Gate". Can somebody help me?
Thanks,
Hai

I am still interested in Clients or other Inquiries in this
Subject.

Does Premiere Pro 2 use graphics card for playback?

Does Premiere Pro 2 use graphics card for playback? I am using a 350W PSU, so my nVidia 6600GT runs in low-power mode, and my video playback in Premiere is choppy. The same .avi files play fine in a media player, so it can't be a disc issue I guess... Please advise, thank you!

Only the latest CS5 uses SELECTED card's GPU for video acceleration
>same .avi files play fine in a media player
Playback is not at all the same as editing
Use the FREE http://www.headbands.com/gspot/ to find out what codec is inside that AVI wrapper
Anything other than DV AVI type 2 with 48khz sound is not going to do well in Premiere

Override Ethernet to Use Airport Card for Internet

Similar Messages

Maybe you are looking for