Override the storage section check for manual entries

Hi All,
I am facing a issue on Storage section search.While creating To system is giving correct Storage section according t the settings but if I would like to change the storage section to different storage section system is not giving any error message.It is giving only warning message check your enteries.
So I would like know is there is config settings to avoid another storage section selcetion which are not assignned storage search indicator.
I have checked in help.sap.com .I following information .
To set up the strategy for storage sections, see the section on activating storage section searches under Strategies in the Warehouse Management IMG documentation.
If storage section checking is active for the storage type, then the system searches in the storage type only for those empty storage bins in storage sections that have been allowed for the material being put away. When you are creating a transfer order and manually enter a storage bin, then the system checks whether the bin is in a storage section that is allowed for the material.
*You can also make an entry in customizing that permits you to override the section check for manual entries.*_
Can please advice me inorder activate the config for override the section check for manual entries or any warning message.
Thanks & regards,
Srikanth

HI,
Thanks for your reply.
I want Error message.
Regards,
Srikanth P

Similar Messages

Storage section check indicator -- ID & Pick point

Dear Gurus ,
1. I have defined new storage type with NO storage section check. then maintained material with storage type indicaor.with storage type search strategy only.
in this case the system does not suggest the bin or even storage type.
But if i maintain the storage section indicator & section search strategy then the system proposing Bin while creating TO.
Then what is the use of deactivating the storage section check while defining the storage type??
2. Can anybody explain me what is the ID point storage type & Pick point storage Type.
Is it mean that the perticular material from storage type can be only picked or putaway from the
storage type that is assighned ID or pick point?
If yes in which scenario it will be utilised or how it works?

What are the other influencing factors you have set for your storage type search? For example stock status, WPC? Activity - E or A or 2-step?
2. Can anybody explain me what is the ID point storage type & Pick point storage Type.
See here for ID point:
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f846b74afa11d182b90000e829fbfe/frameset.htm
and here for Pick Point:
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f847124afa11d182b90000e829fbfe/frameset.htm

Live meeting - After click Join the Meeting, it prompted for MeetingID, Entry and Location are blank, need to key in information manually

Live meeting issue:
After click Join the Meeting, it prompted for MeetingID, Entry and Location are blank, need to key in information manually
1. It seems OK on Live meeting client settings.
2. Then uninstall and reinstall live meeting client and addons. live meeting version now is 8.0.6362.41
3.can schedule live meeting success.
but issue persists.

Live meeting issue:
After click Join the Meeting, it prompted for MeetingID, Entry and Location are blank, need to key in information manually
1. It seems OK on Live meeting client settings.
2. Then uninstall and reinstall live meeting client and addons. live meeting version now is 8.0.6362.41
3.can schedule live meeting success.
but issue persists.

Error "The propertyArray section contains a duplicate entry.."

Hello,
I'm trying to load a flat file into EPMA, but the system give me back the error:
"The propertyArray section contains a duplicate entry;..."
I correctly set the property IsPrimary...
The error is only about shared elements.
Could someone help me?
Thanks
Maurizio
PS: I'm working on version 11.1.2 Planning

Hi Jasmine and thank you for your answer...
yes, I set the same alias for the primary member and for the shared member in the hierarchy section. I tried before, in other applications, to load metadata with shared members sharing the same alias with the primary member and it worked. Maybe this time i have made a mistake with the ADS file but i'm not able to find it out.
The application is managed with Shared Library.When i load metadata in Shared Library, EPMA returns warnings, not error.
Am i wrong or it is possibile to load shared member via ADS file with duplicated alias?
I think these warnings don't allow me to deploy the application correctly.
Thank you very much for your help.
Maurizio

User exit to change the storage section indicator (MLVS-LGBKZ)

Hi.
I'm looking for a user exit which be able to change the storage section indicator (field MLVS-LGBKZ) proposed by the material master data in the process of creating a TO (transaction LT06). I haven't found any user exit for this. Do you know any user exit to change this value?
Thanks in advance

hi,
thank you for your response.
whatever the exit which you have been provided, not calling when i creating PR through MD50.
i need an exit which will trigger when we create PR through MD50.
Many thanks,
Regards,
kiran

Just bought a new Airport Extreme BS. After setup my iphone4 won't find the network (not even with manual entries), but my iMac (2009) does. What is wrong?

Just bought a new Airport Extreme BS. After setup my iphone4 won't find the network (not even with manual entries), but my iMac (2009) does. What is wrong?

Well, after another call with Apple support and the engineers, no success. After spending over 20 hours trying to debug this, I give up. Apple was basically fishing for a solution with trial-and-error settings on the iphone. Then they wanted me to plug in software to log my iphone connections to the router, etc, etc., etc., at which point I decided I no longer wanted to participate in their testing process and will simply return the router.
25 hours of my life I'll never get back.
Big bummer, and frustrating for all the obvious reasons.

Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

Hi SandyS_VZW,
Yes tried resetting the wifi connection and problem still persist.
Here it is...to make it clear. Connected thru the same wifi at home...
-> emails (yahoo/gmail) and facebook WEBSITES are working fine and fast when using/accessing thru a browser (chrome/samsung browser) - no problem with this.
-> emails (yahoo/gmail) and facebook APP is soooooo sloooww (thru the App). Slow I mean comparing it to using their browser/websites... news feeds/emails refreshing so quickly but not when using the APP installed in Samsung Galaxy Note 4. Slow like - It will take around 5-10minutes just to get your emails and news feed refreshed.
THIS HAPPENS ONLY WHEN CONNECTED THRU A WIFI which has a speed of 10-20mb. It is not happening when connected to the network data/plan.
My wife has the same Samsung Galaxy Note 4 (coming from different provider at&t) - same setup (emails, fb app), same wifi connection, but she's not experiencing anything like it.
Not sure why, I dont want to believe that while connected to a WIFI, Verizon is restricting anything and ******* me off to make me switch to my data plan connection everytime - which is Unfair!
Was there a known issue similar about this case?
thanks,

How can i write the below code using "For all entries"

Hi
How can we write the below code using "for all entries" and need to avoid joins...
Please help
SELECT aaufnr aobjnr aauart atxjcd a~pspel
agstrp awerks carbpl cwerks
INTO TABLE t_caufv
FROM caufv AS a
INNER JOIN afih AS b
ON aaufnr = baufnr
INNER JOIN crhd AS c
ON bgewrk = cobjid
AND c~objty = 'D'
WHERE ( a~pspel = space
OR a~txjcd = space
OR NOT a~objnr IN
( select OBJNR from COBRB AS e
WHERE objnr = a~objnr ) )
AND a~werks IN s_plant
AND a~auart IN s_wtype
AND NOT a~objnr IN
( select OBJNR from JEST AS d
WHERE objnr = a~objnr
AND ( dstat = 'A0081'OR dstat = 'A0018' )
AND d~inact 'X' ).
Reward points for all helpfull answers
Thanks
Ammi.

Hi,
SELECT objnr objid aufnr
        from afih
        into table t_afih.
SELECT objnr
        from JEST
        into table t_JEST
        where stat = 'A0045'
           OR stat = 'A0046'
           AND inact 'X'.
SELECT objnr
        from COBRB
        into table t_cobrb.
SELECT arbpl werks objid objty
      from crhd
      INTO table it_crhd
      FOR ALL ENTRIES IN it_afih
      WHERE objty eq 'D'
      AND gewrk = it_afih-objid.
SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
        FROM caufv
        INTO table t_caufv
        FOR ALL ENTRIES IN it_afih
        WHERE aufnr = it_afih-aufnr
          And pspel = ' '
          AND txjcd = ' '
         ANd objnr ne it_crhd-objnr
          AND auart in s_wtype
          AND werks in s_plant.
         AND objnr ne it_jest-objnr.
dont use NE in the select statements, it may effect performance also. Instead use if statements inside
loops.
loop at t_caufv.
read table it_chrd............
if t_caufv-objnr ne it_chrd-objnr.
read table it_jest..........
   if   if t_caufv-objnr ne it_jest-objnr.
    (proceed further).
   endif.
endif.
endloop.
hope this helps.
Reward if useful.
Regards,
Anu

HT1725 The files seems to be corrupted. To redownload the file, choose "Check for Available Downloads" from the Store menu.

While downloading apps from iTunes Store following error is repeatedly coming "The files seems to be corrupted. To redownload the file, choose "Check for Available Downloads" from the Store menu."? Please suggest any solution.

Contact itunes support.

Problem in the storage section of " about that mac "

Hello everyone,
I recently bought a new 2014 Mac book pro retina 13 inch and I'm really happy with it even if I think that OSX Yosemite have some bugs ( usually fluidity ) .
But I have a problem in the storage section of "about that mac", the problem is that it says everywhere that i have used 66 Go of the storage but in that section it says that I have 77 Go of applications ( more than 60 go more ). So I wanted to know if it was hiding a bigger problem or if it was a basic OS problem without any importance.
I'm looking forward hearing from you !
Thank You

   Re-index Macintosh HD.
   Spotlight reindexing will take a while to finish.
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409
   You will see a new category “Other” in the Storage Display.
   About “Other”:
   http://support.apple.com/en-us/HT202867
Note:
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273

Whats the best virus checker for a MAC

whats the best virus checker for a MAC

rkaufmann87 wrote:
And I'm of the school that says no virus checker is needed. This assumes the user has a minor amount of common sense and does download illegal software, visits *********** sites and keeps OS X up-to-date by using Software Update regularly.
I'm in almost full agreement with everything you've said except for the ************** sites part. Most current Mac malware comes from very ordinary and even top level sites these days. Flashback came from hundreds of main stream WordPress blog sites. The New York Times primary web site was spreading malware for 24 hours before it was discovered. Users can no longer feel confident of not being infected just because they avoid sketchy sites.

How do I/Can I define the interval Mail checks for new email?

How do I/Can I define the interval Mail checks for new email?
Thanks
Glyaflya
iPad 16G/3G ios 4.2.1

Settings > Mail, Contacts, Calendars > Fetch New Data

HT201412 My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

Are you using the charger and cable that came with the phone?
Are you using an unauthorized third party charger?

Defining the Fields for Manual Entries in Conditions Type

Dear Team,
I want to define new fields in the Option Manual Entries in Condition Type eg PR00 . Can you tell me the Setting where do we define those settings and where are they control.
Thanks,
Prashant

Hi
The option provided for Manual Conditios are Hard Coded by the SAP, and you can not add any new option. If you want to check, pl. check the value range of Domain KMANU, where it is maintained.
What is your requirement? May be you can fulfill your requirement by some other mean, like USER EXIT.
Regards
AA

What is the procedure for scheduling agreements, for manual entry

dear sirs,
pls explain the procedure for scheduling agreements(manual) creating and invoicing.

From the Purchasing menu, choose Outline agreement ® Scheduling agreement ® Create.
The initial screen appears.
Enter the necessary data. Any data you enter under Default Data: Item will appear as default data in each item.
In the Agreement type field you specify whether you are creating a scheduling agreement with or without release documentation, for example. The agreement types LPA (with release documentation) and LP (without release documentation) are defined in the standard system.
Press ENTER.
The header data screen appears.
Enter the duration of the scheduling agreement. Check the other fields on this screen. Make any necessary changes (e.g. the terms of payment) and define the header conditions (see Maintaining Conditions).
Press ENTER.
The item overview screen appears.
Enter the necessary data for each item (material number, target quantity, price, receiving plant, account assignment etc.).
Material without material master record: leave the field for the material number empty and enter the following:
A short description of the relevant material or service in the Short text field
The material group to which the material belongs
The account assignment category (column A)
The target quantity and the order unit
If you specify an account assignment category, you must enter the relevant account assignment data for each item of the scheduling agreement. To do so, choose Item ® Account assignments.
(See also Account Assignment.)
If necessary, review the details for each item. Select the item(s) to review. Then choose Item ® Details to call up the item detail screen.
Enter the desired conditions for the item (discounts, surcharges etc.). To do so, select the item and choose Item ® Conditions.
Enter further text for the item if any additional instructions to the vendor or to Goods Receiving are necessary. Choose Item ® Texts ® Text overview.
Save the scheduling agreement.
Fi you want to use firm zone then
On the scheduling agreement item overview screen, select the item for which you wish to define delivery schedule time zones.
Choose Item ® More functions ® Additional data.
In the Firm zone field, enter a number of days (calculated from the current date) defining the period after whose expiration the firm zone ends and the trade-off zone begins.
In the Trade-off zone field, enter the number of days (calculated from the current date) defining the period after whose expiration the trade-off zone ends and the planning zone begins.
If the firm zone is to cover one month, enter the value 30 (days) in the Firm zone field. If the trade-off zone ends one month after the firm zone, enter the value 60 in the Trade-off zone field.
In the Binding for Materials Planning field, specify whether Materials Planning may change schedule lines that fall within the firm or trade-off zones.
Save your data.
Delivery schadule
Choose Outline agreement ® Scheduling agreement ® Delivery schedule ® Maintain.
The initial screen for the creation of delivery schedules under scheduling agreements appears.
Enter the document number of the scheduling agreement and press ENTER.
The item overview screen for the scheduling agreement appears.
Select the item you wish to schedule. Then choose Item ® Delivery schedule.
Enter the following for each schedule line:
- Date category (Month, Week, or Day) and the corresponding date
- Delivery time-spot (if applicable)
- Quantity to be delivered (the unit of measure is the same as in the scheduling agreement)
Referencing a purchase requisition: Choose Sch. agmt. schedule ® Create w. reference ® To purchase req. to adopt the delivery data from an existing requisition.
Save the delivery schedule.
Invoice is same like PO

Override the storage section check for manual entries

Similar Messages

Maybe you are looking for