Overriding Bounceback Ver. for Selected Third Party Senders

We are happily using bounceback verification. However, we have a group here that has hired a third party to send out survey emails for them. We would like the undeliverables from these mailings to come back to us.
Has anyone successfully configured this? At Ironport's suggestion, I have created a mail flow policy that accepts untagged bounces. Then I created a sender group that uses this policy and added the 3rd party's IP as the sender. I put this sender group 2nd in the list (if that matters) after Whitelist but above Blacklist, suspectlist, etc. However, the untagged test undeliverable still does not come back through.
Any suggestions would be appreciated.
Thanks,
Sparky

Everything you've done by adding a customized Sendergroup/Mail flow policy(ie. Accept-Untagged-Bounces-Sendergroup) is fine.
More than likely, the IP, hostname, or partial hostname that you entered is not matching against those undeliverables that are coming back. See if you can obtain any of those undeliverables and see what IP / hostname it is when it makes contact with the Ironport appliance.
Also, you can try search for the IP address that you entered in for those customized sendergroups.
On the command line of your ironport appliance, type this:
grep -i "IP_Address" mail_logs
If they connect, you should see their IP addresses with respect to ICID's.
ICID's represent when outgoing servers connect to your Ironport appliance.
Here is an example of what it may look like:
Tue May 13 13:29:53 2008 Info: New SMTP ICID 4 interface Management (74.201.91.95) address 10.251.0.73 reverse dns host bungalow.sfo.ironport.com verified yes
Tue May 13 13:29:53 2008 Info: ICID 4 REJECT SG BLACKLIST match test.ironport.com SBRS None
then type this:
grep -i "ICID 4" mail_logs to get more information.
Feel free to paste back when you get from the logs and I'll help analyze.
We are happily using bounceback verification. However, we have a group here that has hired a third party to send out survey emails for them. We would like the undeliverables from these mailings to come back to us.
Has anyone successfully configured this? At Ironport's suggestion, I have created a mail flow policy that accepts untagged bounces. Then I created a sender group that uses this policy and added the 3rd party's IP as the sender. I put this sender group 2nd in the list (if that matters) after Whitelist but above Blacklist, suspectlist, etc. However, the untagged test undeliverable still does not come back through.
Any suggestions would be appreciated.
Thanks,
Sparky

Similar Messages

  • RFC destination for your third-party tool

    Hello SAP Guru's,
    I have recently established external db connect for an iseries database. Now developers wants to use the open hub destination to extract data to non-SAP systems. They are using API: RSB_API_OHS_3RDPARTY_NOTIFY to connect a third-party tool to the BI system and use this third-party tool to distribute data to other non-SAP systems. To do so they need RFC destination for the third party tool. Could you tell me which RFC connection i have to use in SM59 ? I mean is it ABAP connection or TCP/IP connection or HTTP connection to external server?
    I would highly appreciate any help on this.
    FYI:
    I have already gone through below help link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/8de3f4743b22a8e10000000a1553f6/frameset.htm

    This will be of type TCP/IP.
    You will need to create an RFC server application on the thirdparty system, and implement this function there. You will need to define that server application in your RFC destination definitions (host/Program).
    You may need to read up RFC server help documentation; you can also browse the SAPGUI subfolders for RFC server sample applications and C code (if you have installed GUI in full, there should be such subfolders on your PC). You can also ask for help on 'application server' or 'abap' forums for this.

  • Where can i complaint about a Developer imposture for a third party app that i have already purchased?

    Where can i complaint about a Developer imposture for a third party app that i have already purchased?

    I'm not sure what you mean by a "developer imposture", but if you are having a problem with an app that the app's developer cannot or will not assist with, go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • Looking for a third-party affiliate program that will integrate well with Adobe Business Catalyst.

    Dear Adobe Community,
    I am looking for a third-party Affiliate Program that will integrate well with the Adobe Business Catalyst platform.
    The requirement is fairly basic, i.e.,  to track multiple affiliates and down-stream affiliate-to-affiliate referrals. Also looking to report and display these referrals an affiliate’s dashboard.
    We have looked into Affiliate Program Software, Affiliate Tracking Software Marketing and would like to entertain other options before making a decision.
    Any assistance would be greatly appreciated! —Thank You!
    Kind Regards,
    Doug McClure

    For what it is worth, I am a fan of NuGen, I have both SEQ 1 and 2 and two stereo enhancing tools (stereoizer and stereoplacer I think they're called). Since I have the SEQ 1 it replaces all Channel EQ's. And the stereotools sound great and very lush, in stead of the more usual cheezy combfilterthingies that pass for stereo enhancing tools.
    And I actually like the interfaces. Simple, but stylish, functional and ergonomic (in this case meaning you can see all parameters in a quick glance, no guessing at settings).

  • I renewed my subscription for a third party app and was charged TWICE! $38 bux a pop. How do I go about getting one of the charges refunded?

    I renewed my subscription for a third party app and was charged TWICE! $38 bux a pop. How do I go about getting one of the charges refunded?C

    You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • HT201335 Is there a way to get airplay to work from iOS to my macbook without having to pay for a third-party application?

    Is there a way to get airplay to work from iOS to my macbook without having to pay for a third-party application?
    I've been trying to get my iPhone screen to play onto my macbook.

    There are no free ways to do it that I have seen. However, Reflector is reasonably priced. http://www.airsquirrels.com/reflector/

  • Is it possible for a third party to be added to an esatblished text message thread?

    Is it possible for a third party to be added to a text message thread (between 2 people). This test message thread has been established for over a year! He says he could see our message history via his icloud. Is this possible? Please help.....

    How "third party" are we talking about here.....? Not another user (usually family) who has access to the same Apple Id, is it? I know, that seems too obvious.....
    Could you explain the situation a little more? Did you or the other party forward your iMessage ("text" between "i" devices/Mac users) to this 3rd party? How did this 3rd party end up with any portion of your conversation (or is that the question)? I know it is easy to forward a portion of your conversation to another user. When you choose to forward a "text bubble", you receive round check boxes next to all messages in the conversation; you just pick and choose how much you want the 3rd party to receive. Other than that method, I know of no way to loop in a 3rd party to an existing conversation via iPhone or iPad.
    Anyone else?
    Best of luck,
    Bill

  • IOS 5 Notifications Not Working for Some Third Party Apps

    Recently updated my iPhone 4 to iOS5. Notification center worked perfectly for a week, but then I noticed that certain apps (Beluga) would not show up in the notification center despite receiving new messages. The home page didnt update with a badge either. It seems as if push notifications for some third party apps are not working correctly.
    I have already attempted all of these to correct the problem to no avail:
    1. Confirming notification settings for each application
    2. Turning notifications off and then on
    3. Removing and reinstalling app
    4. Restarting the iPhone
    5. Shutting down and powering up the iPhone
    6. Restoring the iPhone

    Having the same problem...  Ipad 2 running iOS 5 working fine.  My iPhone 4s gets the occasional Facebook notification but not much else.  Got home today and had about 5 notifications on the iPad that never came through to the iPhone.  Tried everything you tried and nothing....

  • Standardise definition & selection method for ALL third party plugin presets!!!

    Over at LogicProHelp there is a very useful topic relating to Logic presets - in which many users have spent time saving individual third party plugin settings as LOGIC presets... which is enormously helpful when selecting instruments etc because they can be selected using a keystroke etc and found within the Logic Library browser window - which is of course searchable!
    These presets have then been uploaded to the forum for others to download.
    http://www.logicprohelp.com/viewtopic.php?p=367267#367267
    I posted on the topic recently and thought it worth mentioning over here on the Apple forum.
    Here's what I said - does anyone agree/disagree? Is this something that Apple should work on? For me it's a no brainer but I'd like to know what others think....
    "MO 3rd party instruments that rely on mouse-clicks or anything more than one button press to change a preset are incredibly badly designed. It's massively frustrating and impedes creative flow to have to use a mouse, or press several keyboard buttons just to move from one sound to another. Native Instruments interfaces are amongst the worst offenders - you even have to MANUALLY specify what presets you want to use with specific MIDI Program Change messages - because the latter are the only way I know of using anything other than the NI interface to change sounds in their plugins.
    The Logic Channel Strip settings saved along with 3rd party Plugin settings saved as Logic Presets have proved a recent revelation for me.
    Now I can change instrument presets using a keystroke, a midi message, almost anything I want.
    And then there's the Logic Library browser - now that so many sounds are saved as Logic Presets, the Logic browser window has become really powerful - being able to search my entire library for "bass" or a particular instrument name - REGARDLESS of which third party plugin is required to play the sound - IT JUST LOADS AND PLAYS!
    Maybe I'm in the minority but I think of a sound I want first, NOT which instrument I should load and then browse through - the latter is kind of backwards for me.
    I really think that we users should pressure Apple and plugin developers to provide Logic (and indeed other DAWs) presets with ALL of their products because the amount of effort on their part is minimal compared with countless end-users doing this task manually over and over. The current situation is ridiculous.
    DAWs are incredibly powerful these days but the lack of a plugin preset/sound library definition standard is quite crippling to work flow.
    I mean if there were a STANDARD LIBRARY DEFINITION such as with Native Instrument libraries or Apple loops where sounds are defined universally and supplied as such in a common preset it would revolutionise sound discovery/selection within DAWs.
    Kind of like a document management system that applies to ALL plugins, by ALL developers and the installer for a plugin would then add all its presets to the management system/common library"

    Sid Merrett wrote:
    Can you give me an example of a plugin that doesn't work with the Logic save preset function?
    Sure, I could give you lists of plugins for each of those particular scenarios I addressed.
    In that specific case, for one example, Spectrasonics instruments for a few years did not support the hosts' save/recall settings function (at least in Logic), and when contacting them and asking why Stylus RMX could not recall settings saved via Logic's preset system I was given the explanation that it wasn't supported for technical reasons.Basically, it only save/recalled a small handful of settings, the rest were lost, meaning it was impossible for quite some time to use the Logic's save/load settings feature to save user presets, you had to use the plugin's own internal save features. (Yes, the instrument's state was saved in the song, but *wasn't* able to be saved via the preset handling, for technical reasons).
    A year or so later, and later Logic versions, they finally got round to making it work as the varioous parts of the host and instruments were upgraded to handle larger data requirements. Spectrasonics instruments are examples of instruments with very specific, custom browser features, many of which you lose if you save data using Logic's functionality - not to mention the effort of saving, naming and organising 8000+ patches per instrument. Plus you have many levels of data - you often load a loop into a part, and a part into a group of parts, and they are different types of data. The hosts save/load feature only saves the state of the plugin - it can't be used to load Loop 14 into part 2, for example. It's the whole plugin, or nothing. More workarounds in terms of how you organise your loading/saving of different types of data.
    There are other instruments too, and ones I've beta tested where I've got into the technical details and had to have the preset format changed or simplified because hosts had difficulties storing the data correctly. It's quite a complex thing, in the main, and different instruments implentation of preset handling mean that the whole thing is full of workarounds, compromises, or plain failure to use the feature completely.
    Other instruments, such as Minimonsta, lose functionality when saving via the host - for example, you only get the meta patches and patch morphing functions when saving via the plugin's own file format, and that stuff doesn't happen when saving via the host.
    I could go on and on about this - every develop has different requirements and they mostly all either do it very basically and rely on the host, or bypass the hosts save/load functionality and implement their own which they can be in control of and that will work across hosts and across platforms. For instance, there is little point having a beautifully organised Oddity library if all those sounds are now unavailable to me if I choose to work in Live...
    That's why the whole preset thing is a complicated mess and isn't liable to be sorted soon.
    There is a developer over on the PC trying to make a system to unify this stuff between plugins - it's PC only right now, and I forget the details this second, but it's acknowledgement that people recognise this whole thing is a mess and looking at ways to improve the situation.
    Sid Merrett wrote:
    I hadn't spotted that - thanks. You can't use the Logic Library window to search for Plugin Settings, only Channel Strip Settings.
    You *can* use it to search for plugin presets, but only within the context of a single plugin. Ie, if I select the ES2, I can see, and search, the ES2 plugin settings. But often I want "a bass sound", I don't necessarily know that I was an "ES2 bass sound", or a "Minimonsta bass sound" or whatever.
    The point being, I just want a sound that will work, and I don't know where it will come from. Forcing me to choose and instrument first can be counter productive. How many times have you needed a sound, and you go "Ok, there might be something in pluginX that'll work?" - you load up pluginX, flip through the sounds, don't find anything useful, then go "Ok, let's try pluginY", no... pluginZ etc etc
    I miss Soundiver in many ways. *Ideally*, I'd like one central method of storing my presets which will work cross-plugin, cross-host, cross-format and cross-platform that is a standard that all developers and hosts support, and that offers the main core features that developers need, from simple, single patches with names, up to full meta data, cataloging, organising, author and notes tagging and so on. You can still give the users a choice to use the individual plugin and individual plugin's gui for patch selection, but you can get far more standardised if you want, with the advantages that gives - and you don't have to export patches into the system, as it's developer supported, all presets for your instruments would be instantly available in the library, just as they are in the instrument directly.
    But it's difficult to get developers to agree on much, these days - the most likely thing to happen is someone somewhere creates a cross-platform standard for this that gains momentum and that developers and hosts want, or *need* to support.

  • How to use message queue for inegrating third party with EBS

    Hi Experts,
    We would like to integrate a third party system with EBS using message queues.
    Where we will subscribe to a businnes event and which will populate the messages to messages queue.
    But how can we deque this message in third party systems. We are in R12.1.3 and no FMW installed.
    Any adapater or something is availabe, If so please throw some inputs.
    Thanks
    Bhaart

    Please go to the link
    http://developer.novell.com/extend/composer/1006.html
    and also see the "message filtering" section.
    Where you can find
    Exposing message selection hints in the header portion of a message is a common tactic when multiple receiving apps are pointed at the same queue. The application that is best suited to handling a given message type can harvest just the messages it needs, while other applications can act on messages better suited for them. Administratively, it is more efficient to set up one queue (with multiple receivers accessing it) than to set up multiple queues, each with a dedicated receiver. My question is how can I achieve this Via progamatically ?

  • Looking for a third party utility to replace a file's "modified Date" field

    For video files, apparently the organizer displays the thumbnails with the date taken from the file's "modified date" field. For some wierd reason (which I'm discussing with Adobe CS) the organizer changed the date of all my videos in the "modified date" field, so now the chronology of all my video clips in the organizer went down the drain.
    Is there a third party utility to replace the "modified date" field of a file with the original shot date? (which in W7 is shown in the "Date" field).
    In other words: for every video file in my library, I want to take the date from the "Date" field and put it in the "Modified Date" field
    Thanks for your help.

    OK thanks.
    I've found a utility that modifes several of the date fields.
    Now, I just want to be sure that I don't screw this up...
    Which of the several date fields of a file holds the actual shot date?
    Which of the date fields is used by the organizer to "organize" the video files (avi and mov's) chronologically?
    Thanks for your help

  • Conditiuons needs to be ZERO for creating third party sales order.

    Hi Friends,
    we are creating third party sales order, which triggers PO automatically based on the outline agreement.
    before saving the PO , i needs to set ZERO for cretain condiations.
    please let me know how to solve this.  means any user-exits are to solve this or anmy BADIS.
    REGARDS,
    vIJAY

    Hi Satya,
    i am creating Project for  EXIT_SAPMM06E_006... but it asking  Enhancement Name. and also creation steps and implement steps.
    which Enhancement that i want to implement.
    pls help.
    regards,
    Vijay

  • Rescheduling for the third party items

    Dear Experts,
    I have one issue. In the sales order there are TAN and TAS items. TAN items are delivered and done with PGI. For TAS items PO created and then MIRO also done. Now some new items are added in the sales order.
    Why is it that the system reschedules the dates (Delivery date, loading date as well as Material availability date) for TAS items but at the same time it does not reschedules the TAN items. Strange but true..
    I would like to add here one more point. When there is a complete delivery indicator system considers the delivery date of the TAS item as the highest delivery date and reschedules the dates for rest of the items. Actually TAS items should not be considered at all since the MIRO is processed and the delivery to the customer has taken place.
    Is this a standard process..? Kindly help on this issue. if anyone has any idea on SAP note please do let me know.
    Thanks in advance.
    Regards,
    Vishita..
    Edited by: Vishi19 on May 18, 2010 12:44 PM

    Hello
    There are no other supported interfaces or tools other than LOGMINER to mine and interpret the oracle redo/archived logs. Oracle has the rights to change the redo format or make any changes in the redo stream or change vectors as part of any patchsets or new releases. Any third party software might face problems if Oracle changes its redo format or makes changes in the redo format.
    You might need to take a look at the following metalink note:
    <Note: 97080.1> "Extracting Data from Redo Logs Is Not A Supported Interface"
    However Oracle has a replication technology called Oracle Streams which infact mines the redo/archived logs with the help of a new background process called 'capture process' which does not use any APIs but is built into to Oracle Kernel itself. Oracle Enterprise Edition will have this feature built-in.
    Thanks,
    Rijesh

  • Cost center not populated in Purchase requisition for a third party order

    Hello,
    We are currently testing the Third party order flow which includes :
    1. Creation of a sales order with item category TAS
    2. A purchasing contract is maintained for a sales order item at the schedule line level.
    (In the purchasing contract, account assignment is already maintained for each contract item, meaning a G/L Account and a cost center).
    3. Automatic creation of the Purchase requisition when the sales order is saved.
    >> The account assignment is not copied from the contract to the Purchase requisition. Do you know why and how I can do that ?
    Thanks
    Best regards
    Benjamin

    Hi Palani,
    if i am not wrong This WBS in location or additional tabs are used for settlement purpose. For PR creation by maintenance Orders can have Order number as account assignment.
    Please reply
    Thanks
    Sunil

  • UCCX 9.01 Database Access For a Third Party Application

    Hello Folks,
    I'm starting with Cisco UCCX (and Cisco Collaboration too) soo an old customer ask me for help in develop an Web Application to collect specific data from queues, agents... in the Cisco UCCX, until now everything is OK, no problem. This request was based because our customer has not adapted with the format of the data submitted for monitoring queues and agents presented by UCCX.  When we tried to collect those data from UCCX Server, we seen that UCCX have an internal Database and for collect data from this one is not possible by default by a Third Party Application. For this kind of solution, we'll need our UCCX server connecting directly with external Database (Like SQL, Oracle..) and a specific license is needed (Unified IP IVR or Unified CCX Premium). Then, our Application would collect data from this DB.
    is that right?
    Please feel free to share any suggestion and experience about.
    Best Regards,
    Rodolpho Pereira

    Hi Rodolpho,
    You need a PREMIUM license, in case you wish to integrate to an external DB (SQL, Oracle, etc). This is used in case of reading values from an external DB or writing values to the same using the DB Read and DB write steps.
    From my understanding, your customer needs to have a reporting capability through their third party application. This is generally termed as Wallboard.
    For more information on how to how to configure Wallboard, please check the Administrator guide for UCCX:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_0/configuration/guide/UCCX_BK_U767AC77_00_uccx-admin-guide.pdf
    Basically, the UCCX has a uccxwallboard user whose password can be changed from the UCCX admin page to be used to integrate with the third party software. This user has access to the Real Time Statistics tables on the UCCX and can be used to pull out the necessary data.
    Hope this helps!
    Regards,
    Arundeep

Maybe you are looking for