Overriding Defaults for "Reply To" and [Reply] "From

When I reply to a message, Mail selects values for the Reply To field and the From field. I can override these manually, but is there a way to set a different default? I could not see any way to do this with Rules. I suspect there is a way to write an Apple Script to do this, but that's work.
thanks

Thanks. I understand that Reply To does not have any other information by which to choose a default other than the email address of the sender. However, if one has multiple email accounts configured, it might be the case that you want to use one of them is the FROM default regardless of which account receives the email. As you point out Preferences --> Compose will let you do this. But if the FROM address is content dependent, then I need to able to construct a Rule - apparently that is not possible.

Similar Messages

  • The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • Apple TV for watching photos and videos from IMAC

    I am considering purchasing Apple TV 40GB for streaming photos and videos from my IMAC to TV on demand. Is that use case supported well by Apple TV or they are secondary and watching movies and TV shows from Itunes library are the primary use cases? I looked up Apple's page on Apple TV but it does not even talk about watching home videos using Apple TV.
    Through posts on this forum and other places, I found that I would have to "export" video in either large or medium format. The question is how is the quality of watching that video using ATV over wireless N network?
    Related question is how good is ATV's video card?
    Is this a common use cases many people use ATV for? I have recorded lot of videos using Sony mini-DV camcorder but don't end up watching because creating DVD and keeping organized DVD library is a cumbersome process.
    The other question I have is about usability of Apple remote. I don't have Iphone or Ipod touch with the remote app. Is the Apple remote good enough for playing videos, photos and occassionaly music?
    Thanks in advance,
    DJ

    dj2008 wrote:
    Thanks. A couple of follow-up questions:
    1) All I need to do to stream is to have Itunes running, right? In other words, I don't need to go to IMAC to initiate streaming. Is there a way to wake up the IMAC if it is in standby mode?
    You need imac running with itunes open, and both it an AppleTV connected to the local network.
    I don't think it'll work with computer in standby mode.
    2) I am planning to use Imovie's built-in export function. Is that good enough or do I need other softwares mentioned here (MPEGStreamclip or Handbrake)? Where do I get these softwares? Are they significantly better than Imovie's export function?
    Both are free one from squared5.com, the other you can Google. iMovie's output may well be fine, but I have found in the past that standard export settings didn't give me best results and better could be achieved either using custom export settings from iMovie or using other apps, some of which can be a bit quicker. You will also be able to use the Handbrake app to make Appletv compatible video of your home made non-commercial DVDs (without menus).
    Quality is pretty much in the eye of the beholder so if imovie does the job no reason not to use it.
    3) I have noticed that video quality on my IMAC is not as good as that of same video on DVD created using iDVD. Have 50 inch Plasma TV with up-conversion DVD player. Maybe the graphics card of my IMAC is not as good. I am bringing this up because someone mentioned that quality of video using ATV would be as good as the one seen on IMAC.
    Any upscaling done on the DVD player is altering the original content to give a potentially more pleasing image though not adding any real information.
    The DVD is likely to be of lower quality (though perhaps barely perceptible if conversion is good) than your source video on the iMac, and any differences are likely to be down to the DVD player vs software playback on the iMac, coupled potentially with scaling and frame interpolation on the TV depending on how the set processes incoming video.
    I think it's impossible to say how you'd find AppleTV compared to DVD for playback of your home video though I think the majority of people are more than happy when things have been encoded well.

  • TS3274 My ipad 2 charges very, very slow. It was on the charger for 7 hours and went from 41% charged to 77% charged.

    My ipad 2 is charging very, very slow. Is was on the charger for 7 hours and went from 41% to 77%. I have tried several different charger, even purchased a new charger. What could the problem be?

    Could be your battery needs replacing.
    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Is there a command-line option that will override the "show my windows and tabs from last time"?

    A friend of mine occasionally runs into a web page that causes him problems. To be sure, he should note the URL and submit a bug report if a page causes a browser crash, but in any case, while by default he likes the browser to restore windows and tabs from the previous session, in the case of an obnoxious web page, you *don't* want that to happen. I'm hoping that I can set up an icon for him to click on that will start the browser up on his home page instead of restoring previous windows and tabs when he gets into trouble.

    Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    * http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    * http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes

  • ADF application taking more time for first time and less from second time

    Hi Experts,
    We are using ADF 11.1.1.2.
    Our application contains 5 jsp pages, 10 - 12 taskflows, and 50 jsff pages.
    For the first time in the day if we use the application it is taking more than 60 sec on some actions.
    And from the next time onwords it is taking 5 to 6 sec.
    Same thing is happening daily.
    Can any one tell me why this application is taking more time for first time and less time from second time.
    Regards
    Gayaz

    Hi,
    If you don't restart you WLS every day, then you should read about Tuning Application Module Pools and Connection Pools
    http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcampool.htm#sm0301
    And pay attention to the parameter: Maximum Available Size, Minimum Available Size
    http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcampool.htm#sm0314
    And adjust them to suit your needs.

  • HT5463 How can I, with my new iphone 5, set everything to vibrate only? ...I mean quickly go to vibrate only(for all notifications and calls) from my normal audio settings?

    How can I go from normally selected rings and fnotifications to 'vibrate only' for all calls and notifications?

    Have you tried using the Ring/Silent switch on the upper left side?  If it's set to 'orange', I think it only vibrates for almost everything, with a few exceptions.

  • Email address for replying from questions has changed

    The email address I have used to alert me when someone responds to my post needs  to get changed.
    How do I do that?
    Thanks.

    Hi,
    Click on the 'Quick Access' dropdown in the upper left (under the 'Ask a question' button) and choose 'My settings' from the list.
    There's a 'Configure alerts' section in there where you can change the email address that receives your notification emails.
    Don't retire TechNet! -
    (Don't give up yet - 12,950+ strong and growing)

  • Can i use two characteristics in heirarchy( waiting for reply from 2 days)

    hello Guru's
    I am working on a very non-standard PnL statement report in BI and am trying to come up with a good way to maintain it. Each line item in the PnL statement is based on different characteristics. For instance, the first line item might be a range of account numbers using 0GL_ACCOUNT . The second line item may be a particular Cost Center using 0COSTCENTER and a particular GL Account.
    can i set up hierarchies on certain characteristics (0GL_ACCOUNT, 0COSTCENTER, 0COMP_CODE). Would it be somehow possible to create an entirely custom hierarchy that would use mixed characteristics to come up with each value? If this is not possible, can someone tell me that how can we handle this(query side)?
    thanks,
    sneha
    Edited by: sneha marla on Dec 9, 2008 9:57 PM
    Edited by: sneha marla on Dec 10, 2008 9:59 PM

    hello Nair,
                    i have balances for G/L accounts Ex: 9410 G/L account has balances with cost centers 1000, 2000 and 3000. I need to restrict 9410 with cost center 1000 in hierarchy
    for this i created hierarchy on 0GL_Account like. i created revenues as text node and under revenues i created acetate product as text node under this i inserted G/L account 9410. I kept 0Costcenter in external Hierarchies of 0GL_Account. by that i inserted costCenter also under Acetate product. i am not getting correct values.
    can you please sugest is there any thing.
    Thanks,
    Sneha

  • Creative ideas for Remote Backups and Working from Home??

    Here's my problem in a nutshell:
    My primary workstation is at my office where all my important files are stored. I backup once a month onto an external firewire drive which I (usually) keep off location in case of fire/theft etc.
    In the future I'm going to need to conduct about 75% of my work from my office and the remainder from home. I'd like to be able to work on a file at my office. Go home. Sleep. And be able to work on the same file from home the next morning.
    Any ideas for how I should do this? One solution I had was to run a nightly backup of my office computer (a tower) to a remote firewire drive at home (basically a clone). I could then plugin into the firewire drive with my laptop. This would also serve as a remote backup of my client's files.
    Does this make sense? And if so, does anyone have any suggestions or pointers in terms of easy-to-use backup software. And how complicated would it be to set this up to a remote drive? And will there be problems with remotely backing us, say, a 500 MB file?
    Cheers!

    What O/Ss are involved; are they both OS X? Home OS X, work Windows?
    Many people telecommute by running the applications remotely, with a display server connecting their application to the system they're using. For instance, my work system is Linux; all applications use X windows as their display interface. My home system is OS X, which includes an optional X windows display server. Most of the time, when I need to work from home, I run a VPN client and use 'ssh -X' from an xterm under X on OS X to log in to my office system; and then I can run any application on my office system and have it display on my OS X system.
    Similar solutions exist for most common OSs. Windows systems can run VNC or Citrix to export their display to clients that can run on OS X, Linux, or Windows; OS X can run Remote Desktop to export their display to clients that can run on Linux or OS X; etc.

  • I need to change the storage hard drive for both lightroom and Photoshop from my C drive to F drive

    How do I change my storage drive from C to F in both lightroom and photoshop as I am running out of space on my C drive?

    Storage Drive ??  Photoshop.   What Platform and OS are you running.
    I use PC therefore Windows. When I thing about Application like Photoshop I know the are going to be files all over the place.  Windows like everything installed on the Boot disk.  I gave up the fight many years ago and let windows have it way when application are installed using an installer.  However besides the application files you have user files and I break user files down into to categories. Windows User files like applications settings, preferences, cashes, etc and user Data Files,  Images, text documents, PDF.   Applications like Photoshop also have add-ons an need swap space as well.  While all Windows default library reside on the C: drive you can add additional storage  to you document, music, picture and video libraries the are not on the c: Most of my user data file are actually on external ESATA drives or USB3 drives.  System files, Application Files, Paging, swapping and backup are on internal SSd and Fast Disk drive. Some of the folder that look like they are on C: are actually shortcut links to folders on other drives.

  • Pleas a step by step instruction for downloading photos and videos from verizon palm pre to pc. Thank you.

    Post relates to: Pre 2 p102eww (Verizon)

    1. Hook your phone to your computer via the USB cable provided.  Choose "USB Mode" on the phone when the connection is made.
    2. Open Windows Explorer or My Computer, and find the phone.  View the folders on the phone.
    3. Look for a folder called "DCIM" and inside it "100PALM".  This is where your photos and videos live. 
    4. Copy them to your computer.
    5. As with any USB device, remember to "Eject" the phone (from right-clicking on the phone in Windows Explorer or My Computer) or stop the device using the "Safely remove Hardware" button in the bottom right tool tray in Windows.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • How can I see date and time of a imovie event (new imovie 10.0.4). Thank you for your answer and greetings from switzerland.

    How can I see Date and Time of an event in iMovie 10.0.4?
    Thank you for your answer.
    greetings from Switzerland

    Managing Profiles
    http://support.mozilla.com/en-US/kb/Managing-profiles

  • Hi, I am not able to use airprint for my m1212nf and P1102w from my apple IPAD2 & Iphone 4

    Hi,
    I had updated my HP Laserjet M1212NF & Laserjet P1102w with the latest firmware last night for airprint, but I still cannot print from my IPAD2 & Iphone 4 both with latest iOS 5.1.1, Please advise what should I do. All devises are connect to the same network. Is there a separate software I had to download and install on my Apple devices?
    Kindly let me know.
    Rgds
    scng

    sorry to learn that you are having this isue
    Can you try HP Eprint home and Biz to see if also gives you trouble this one. I personally perfer this over Airprint although they have very similar capabilites due to the fact that the latter will provide you more options in terms of printing remember this will work if the devices and the printer are in the same network gateway or router address,  in Does your router supports bonjour (Mdns)? That may be another factor that may be affecting this.  
    Let me know the outcome in the case you need more assistance I will do my best to help you;
    Hope this helps;
    RobertoR
    And Remember . . .
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Avoid check for article number and price from ORDRSP inbound

    Hi,
    i m working on an integration (with PI) of a 3rd party vendor with a SAP ERP (7.1) backend system. The vendor sends a soap message which is transformed by PI to an IDoc ORDRSP.ORDERS05.
    The vendor sends a purchase order confirmation but unfortunately without information regarding article number and price. Therefore the IDoc remains in status 51 with 2 errros:
    -  Price outside tolerance range (order price 531,60 , new price 0,00 )
    -  Article number differs from that of ordered article 000000000000152672
    Is is possible to avoid the check so that the purchase order's article number and price are not updated by the IDoc?
    Regards,
    Udo

    Hi Udo,
    This error seems to be explicitly populated into Status records of IDOC processing from the include LEINMF2O, form "CHECK_MATERIAL_PO_IDOC" (For Material) &  Include LEINMF2D, form "PRICE_CHANGE". 
    One way to suppress the error message is to populate the existing values in EKPO table to IDOC segment using enhancment component EXIT_SAPLEINM_007, which is called from include LEINMF2X, line number 113.
    Documentation of enhancement component reads
    Functionality
    Reading of further IDoc segments at the time of acknowledgment receipt.
    The current segment is passed on in the parameter segment.
    Data can be stored in the structure CUSTOMER_EKPO.
    As of Release 4.6A, modification of the program-internal table FEKPO is possible.
    This is just a suggestion and don't know how far it will be helpful to your requirement.
    Regards
    Vinod

Maybe you are looking for