Overrun by modplsql logs How to control or manage

ApEx 3.2/Linux connecting to 10gR2.4 database. The $HTTP_HOME/Apache/modplsql/logs/_pls_apex/ folder has more than 29,000 entries over 6 months consuming 17.6 GB of a 26 GB partition. there are 8,800 entries of 0 byte size ranging up to 100.2 MB for a single log file. Googling Apex Log Management got me nowhere fast. Can someone share insight on where to control retention of these logs. I am not inclined to manually start deleting them if they are tied to entries in an Apex control table somewhere! Any insight will be appreciated.

I have always thought of logrotate as managing a specific log file by size or age. These log files are uniquely named from a specific Apex transaction or session incident and never touched again. I will look at your thread reference to see how it might apply in this case. Thanks.

Similar Messages

How to control Calculation Manager status?

Hi,
I have a hyperion system version 11.1.2.2.0.66. I can create a calc rule with no errors. When I deloyed it, is finished successfully. But the calc rule did not work; there is no change on my data.
How I can controll the calc manager?
Note: I checked the location folder; I have no any folder, is called as CalcServer.
thanks for your replay.

Hi,
I controled EssbaseServer0 log file as below.
####<Sep 10, 2012 4:17:24 PM EEST> <Info> <Common> <EPMDEMO> <EPMServer0> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JakKwXh5UcO5yjP5iW1GB3xV0000XS> <1347283044472> <BEA-000628> <Created "1" resources for pool "EPMSystemRegistry", out of which "1" are available and "0" are unavailable.>
####<Sep 10, 2012 4:17:24 PM EEST> <Info> <Common> <EPMDEMO> <EPMServer0> <Thread-210> <<anonymous>> <> <0000JakKwXh5UcO5yjP5iW1GB3xV0000XS> <1347283044515> <BEA-000628> <Created "1" resources for pool "EPMSystemRegistry", out of which "1" are available and "0" are unavailable.>
I controled CalcManager log file as below.
[2012-09-10T16:17:38.161+03:00] [EPMServer0] [NOTIFICATION] [] [oracle.bi.bifndnepm.calcmgr.common.GenericLogger] [tid: 73] [userId: <anonymous>] [ecid: 0000JakKzrg5UcO5yjP5iW1GB3xV0000X_,0] [SRC_CLASS: com.hyperion.calcmgr.common.CalcMgrODLLogger] [APP: CALC#11.1.2.0] [SRC_METHOD: logInfoMsg] Global role for user: admin is ADMINISTRATOR
Both of them didn't contain any rule information. I used the rule as DistributionCalc.
thank you.

How to control and manage several microsoft accounts and have control

Windows 8 has brought many unique challenges, and very few IT people seem to be able to answer questions like this.
I am a mechanical engineer for a small company who wishes to install Windows server2012 on a new server with new laptops for each user, and some users are intended to have windows tablets in addition to having laptops.
We have written policy in place with regard to using office equipment only for business use, not personal, and that all information is confidential, and only free applications may be downloaded or else they will be paid for by the company for all
who require to use them, so there are no issues with regard to who owns what.
Please reply to the question below in simple language, I understand computers and software and how they work, but I am not an IT guy, and our company cannot afford to employ a permanent IT person, so I need to be able to ensure that certain controls
are in place and effected properly by the IT contractor we employ.
The company must at all times have control over and access to all data on laptops and the server, as it is all intellectual property of the company. How do we create Microsoft accounts that allow us to remain in control despite employees using their
mail address and personal pin numbers as an alias to operate ?

Hi,
As I know, SCOM (system Center Operations Manager) can do some monitor jobs which is close to your goal. It is a cross-platform data center management system for operating systems and hypervisors. It uses a single interface that shows state,
health and performance information of computer systems. It also provides alerts generated according to some availability, performance, configuration or security situation being identified.
Operations Guide for System Center 2012 - Operations Manager
http://technet.microsoft.com/en-us/library/hh212887.aspx
If you want more information about this product, you can open a further discussion in the forum below
System Center Operation Manager Forum
http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=systemcenteroperationsmanager
Yolanda Zhu
TechNet Community Support

How does Grid Control Application Management Pack (AMP) discover targets?

I have Grid Control 10.2.0.4 install and am trying to discover Oracle 11i applications. I have applied the patches required to the OMS and the agents and can see the Application Management tab at the top of the targets page. I am able to discover the individual components of the application (i.e. Apache, listeners, database, agents, hosts, forms, etc) but when I go under the Application Management tab and try to discover the Oracle applications I get the following error message:
Error creating Node target for ctx file /ssan/ap00/appl/admin/ssan_ssan.xml; Error:Refresh EMDClient for
ssan.rtd-denver.com
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTDiscovererPreFusion.discoverTargetsForNode; Waited for five minutes, but unable to find
Targetssan-Forms_ssan_ssan(oracle_apps_forms_svlt) in Reposiotry Possible reason - agent: https://ssan.rtd-denver.com:3872/emd/main/ has not uploaded
this target in repository
I have the following in the ebsDiscovery.log
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com 7 targets Found to be saved.
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Forms_ssan_ssan,oracle_apps_forms_svlt
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Apache_ssan_ssan,oracle_apps_apache
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-JServ_ssan_ssan,oracle_apps_jserv
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Forms_ssan_ssan,oracle_apps_forms_svlt
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Apache_ssan_ssan,oracle_apps_apache
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-JServ_ssan_ssan,oracle_apps_jserv
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Convert to Target Isnatnce Name = ssan-Discoverer_ssan_ssan,oracle_apps_discoverer
oracle.apps.fnd.oam.em.sdk.targetData.discovery.ProxyTarget.registerWithEMAgent _methodAccess = 4 Calling lEMDC.saveTarget
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.saveTargetWithAgent - Host=ssan.rtd-denver.com Out
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTDiscovererPreFusion.discoverTargetsForNode refreshSubsystems for node = ssan-:Infrastructure ssan_ssan:APPL_TOP Context
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.checkTragteUplodedFromAgent ssan-Forms_ssan_ssan(oracle_apps_forms_svlt) is Uploaded in Rep=false
oracle.apps.fnd.oam.em.sdk.targetData.discovery.AppsTargetsDiscoverer.checkTragteUplodedFromAgent Waiting for target ssan-Forms_ssan_ssan(oracle_apps_forms_svlt) to be uploaded in repository. (wait itme 10 sec)
I have the white paper explaining how Grid Control discovers databases, listeners, application servers, etc. But I am not able to find a paper that tells how the Application Manager discovers the Oracle applications. Does anyone know of such a paper or which perl scripts are run?

One of the biggest problems I have run into when doing these discoveries is that the agent and iAS and/or Oracle are owned by different users and the agent does not have permissions to read the configuration files.
You situation may be a bit different.
If the host is real busy, it sometimes takes a long time to load the gathered information into the repository. From looking at your log file, this may be your issue.
How busy is the server(s) and database for you OMS and OEM database?

How to controll traces like: ZPAK_4CIDM84URKZ0RNLVYDK6DSSAO_PC_FINISH.TRC

Hi Gurus
I notice in my BW 7.4 system some logs on filesystem level with names like:
ZPAK_4CIDM84URKZ0RNLVYDK6DSSAO_PC_FINISH.TRC
ZPAK_4CIDM84URKZ0RNLVYDK6DSSAO is a InfoPackage.
Do You have any idea how to control such traces ?
I'am looking for TX name in SAP, instead of deleting such traces from cron.
Best Regards
Jan

Hi Gurus
I notice in my BW 7.4 system some logs on filesystem level with names like:
ZPAK_4CIDM84URKZ0RNLVYDK6DSSAO_PC_FINISH.TRC
ZPAK_4CIDM84URKZ0RNLVYDK6DSSAO is a InfoPackage.
Do You have any idea how to control such traces ?
I'am looking for TX name in SAP, instead of deleting such traces from cron.
Best Regards
Jan

HOW TO CONTROL ON CREATION OF SALES ORDER WITH REFERENCE TO EARLIER SO?

Dear All,
I want to contol on creation of Sales order with reference to earlier SO? While creation of sales order our enduser are creating sales order with reference to earlier month SO which I want to restrict. Recently I made changes in sales order like payment terms is grayed, system will atomatically pick pay terms from customer master.Now I am getting correct data also but enduser is using old SO no while creating new SO and old payment data is reflecting in fbl5n.
I want to restrict enduser while creating new SO with ref. to old SO. Only for returns they should be able to use Billing refrence. Pl. suggest how to control the with reference to ealier SO.
Nikhil

Nikhil Deshpande,
If you dont want allow create a sales order in referent to other one, just delete the copy control between these sales order type, so when the user tries to create a SO in reference to other one a message is displayed that is not possible.
Thanks,
Mariano.

CRM Web UI :- How to Control number of session of Web UI for a user

Hello Experts,
We do have very specific requirement which SAP doesn`t recommend in terms of multi-sessioning for a user.So we are little worried upon the challeges.Could you please share your ideas/Experience on following?
1.How to Control number of Internet explorer session for the web UI (may be 2 or 3).?
Though SAP doesn`t recommned more than one but our client requires 2 or more than that but we need to fix it either
2 or 3.
So we are looking for specific setting for this.
2.What are the challenges we need to face if we implement option 1?
3.Specially in interaction record management
    a. Is there chance of loosing the data if agent has opened more than two session.
    b. In which session interaction record data will get stored,the one on which agent picked up the call or in the latest
        one?
Please let me know if I am not clear enough on any point.
Thanks in advance,
Shailendra Tolambiya

Hi Shailendra,
The following wiki page might be useful in this respect:
http://wiki.sdn.sap.com/wiki/x/gxdKDQ
Best Regards,
Shiromani

How to control my MacBook Pro with my iPhone ?

I do wanna know how to control my Macbook pro just with my iPhone, please

If you mean copy files from one to the other you can connect the two via firewire cable and boot one into Target Disk Mode.

How to control follow up doc for Activities

Hi...
I have created 10 different types of Activitiy Doc. When I open any activity in crmd_order I'm getting all other activities as follow up docs(when I click on follow up icon). I dont want all of them, may be I need one or two out of those. How to control those can anyone have idea
Regards,
Ajay

Hi,
Check the copy control for transactions in
spro-->Customer Relationship Management->Transactions->Basic Settings->Copying Control for Business Transactions->Define Copying Control for Transaction Types
If the transactions are maintained as follow up for the transaction you have created then remove the entries which you dont want as follow up.
Reward points if it helps.
Shridhar

How to control DE USB disk Automounts.

Hi,
Can someone please guide me as to how to 'control' Automounts by DE when we plug USB disk drives.
I have KDE4 on my Arch system. When I connect a pen drive/USB HDD which is formatted as vfat/NTFS, the system(or KDE) 'Automounts' it in /media and I have read/write access to it. But if I use the same drive and format it as ext4, it wont be mounted as read/write for normal users but only for root.
Now pen drives and USB HDD's are removable storage drives and hence are volatile and could not have a fixed mount point, so it cannot be mounted by putting an entry in fstab or could they?. And I need my USB HDD frequently, and manually mounting it through CLI everytime and working on it as root is a bad idea i guess.
I am posting this because m confused as to how to control this Automount feature-What is the backend to it? Because I've read that HAL no longer takes care of it and that HAL will be deprecated soon, instead UDEV takes care of it. If that is the case then should I be concerned about polkit? Because that is what's the output provided by Dolphin(freedesktop.org policy prevented blah blah).
Another thing is if HAL is still in use and Automounts my devices then is it independent or polkit is a part of it. Then, is using hal-easy an option or replacement to standard HAL. ??!!??
I tried HAL archwiki and used the code to give a user permission to give rw access to automounted ext filesystems, but then nothing is mounted, it sings the same old freedesktop.org prevented bla blah song. And I think this is a question for all linuxes using Gnome and KDE in general.
Any help is appreciated.

If by 'ability to mount as user' you mean to mount it manually but read/write access to normal users then yes. But primarily I need automounting as user, also be able to give access to other users for read/write et filesystem automounts.
Last edited by kapz (2009-11-17 01:12:56)

How to control a NI USB 6210 from a Lab View program?

Hi,
I started today with Lab View with some earlier experience long ago.
While it took me only about half an hour to get my first program running (great), installation time nor included (of course), I meanwhile read documents for some hours and cannot find out how to control measurement hardware in Lab View.
I want to use a USB 6210 to set a 1-bit digital port. But at the moment there is no USB6210 available so I wanted to write (or do you say draw ?) the program without it and if possible simulate the hardware.
I drew DAQ Assistant into my block diagram and selected digital line output but get "No supported devices found". I don't know if the appropriate driver was installed during Lab View installation.
Also I don't understand the mechanism between DAQmx, tasks and the real hardware. Now I have a "Digital Bool 1Line 1Point" Control in my block diagram. How do signals get from program flow to hardware pin? How can I create a simulation for not connected hardware?
Any help is greatly welcome
Thanks a lot
Martin

Okay here is some more tutorials if you get some free time, specifically the hardware stuff will be relavent.
NI Learning Center
NI Getting Started
-Hardware Basics
-LabVEW Basics
-DAQ Application Tutorials
3 Hour LabVIEW Introduction
6 Hour LabVIEW Introduction
Self Paced training for students
Self Paced training beginner to advanced, SSP Required
LabVIEW Wiki on Training
Launch MAX, it was known as Measurement and Automation Explorer, there should be a shortcut in your start menu / desktop. Under devices and interfaces you can find your hardware and open test panels to control it. This is the first place to ensure your hardware is working. If the device isn't seen you'll need to install the drivers and DAQmx software. If it is there, great.
Now launch LabVIEW. The easiest way to control hardware is using the DAQ Assistant. It has many limitations and isn't recommended for large applications. But for something quick and dirty it works fine. You'll find it under the Measurement I/O >> NI DAQmx palette on the block diagram. If it isn't there you may need to reinstall the DAQmx drivers. This can happen if you installed DAQmx before LabVIEW.
Also you'll find under Help >> Find Examples on the toolbar, many examples on controlling hardware. Feel free to post some code if you are having problems.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

How to control the shared libs when creating an new OC4J in AS 10.1.3.4

Hi there
I experience some wired behavior in AS 10.1.3.4!
I Have 2 different installation of AS 10.,1.3.4 (Win 2003 server).
When I create an OC4J instance (using the manager) at virtual server 1 I got 28 global libraries
When I create an OC4J instance (using the manager) at virtual server 2 I got 30 global libraries, (+ apache.webservices & oracle.ifs.client )
Why this difference ?
And how to control it?
Note the default instance "Home" has 28 libraries on both servers!!
Why is it sometime possible possible to use <instance>applib for the jar, and sometime I need to create an <instance>\shared-lib\global.libraries\1.0 library ?
Regards HAns

Hi there
I experience some wired behavior in AS 10.1.3.4!
I Have 2 different installation of AS 10.,1.3.4 (Win 2003 server).
When I create an OC4J instance (using the manager) at virtual server 1 I got 28 global libraries
When I create an OC4J instance (using the manager) at virtual server 2 I got 30 global libraries, (+ apache.webservices & oracle.ifs.client )
Why this difference ?
And how to control it?
Note the default instance "Home" has 28 libraries on both servers!!
Why is it sometime possible possible to use <instance>applib for the jar, and sometime I need to create an <instance>\shared-lib\global.libraries\1.0 library ?
Regards HAns

How to Control authorization for users with certain status for level 2 WBS Element

Dear All,
Is there any standard way or enhancement available to control authorization for users with certain status for WBS Element i.e. for example
Pre-requisite:
There is only 2 level of project i.e.
Lev_ WBSE_______Description
1___ 7-14.E_______summay outage controller
2___ 7-14.E.2310__ Plant/unit # 2310
2___ 7-14.E.2310__ Plant/unit # 2220
Project Controller (authorization role assigned "Z_PS_OP7_OTGCON_C") have all project level authorization
Plant/Unit Controller (authorization role assigned "Z_PS_OP7_PLNTOTG_C_2310") have only level 2 authorization with enhancement that we did in system by Z table.
User ID_ Plant #
123345_ 2310
122455_ 2220
Issue:
After System Status released and User Status approved the WBS basic date for Plant/Units should be restricted from updating/changing by Plant/Unit Controller level and only project controller should have this authority.
Solution required:
Can any one tell how to control this scenario either by standard or enhancement available to control authorization
BR
Saqib Usman

Hi,
Did you explore SAP Enhancement CNEX0002 Using Transaction CMOD?
Thank you and regards,
Varshal Kachole
The SCN Rules of Engagement

How to control the maximum size of a component in a GridBagLayout

Here is a small program that demonstrates my issue (it's originally from a big program that I couldn't attach here).
I have a GridBagLayout with some components in it. Some of the components are JEditorPane (displaying some HTML) within JPanel and are individally scrollable.
Here we go:
- when I resize the main panel, every components will resize accordingly to their weight (which is here the same for all of them): fine
- when I reduce the size of the main panel until it reaches all the preferred size of each component, the scrollPane of the main panel appears so that the user can scroll: not fine
The behaviour I'm looking for is: when I reduce the size of the main panel, when it reaches the preferred size of the components, I would like that the JEditorPane (which are in JPanel with BorderLayout/CENTER) display their individual scrollbars so that I can see all the JEditor panes at the same time without having to scroll the main window.
If the user continues to reduce the size of the main panel, then, at one point, display the scrollpane of the main panel.
See what I mean? How to control this?
Here is the code:
@SuppressWarnings("serial")
public final class CGridBagLayout2 extends JFrame {
     JPanel mainPanel;
     private final JScrollPane scrollPane;
     private JPanel panelize(Component component, String localization) {
          JPanel output = new JPanel(new BorderLayout());
          output.add(component, localization);
          return output;
    public void addComponentsToMainPanel() {
          mainPanel.setLayout(new GridBagLayout());
          GridBagConstraints c = new GridBagConstraints();
          c.weightx = 1.0;
          c.fill = GridBagConstraints.BOTH;
          String TEST_BIGTEXT = "<html><body><h2>Path</h2>toto/tutu/tata/TestN<h2>Prerequisites</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah<h2>Description</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah blah\nblah blah blah <br/>lah blah blah <br/>lah blah blah blah blah blah blah blah FIN</body></html>";
          for (int index=0; index<10; index++) {
               c.gridheight = 5; // nb Testcases for this test
               c.anchor = GridBagConstraints.FIRST_LINE_START; // align all the components top-left aligned
               c.gridy = index;
               JLabel a = new JLabel("AAAAA");
               c.gridx = 0;
               mainPanel.add(panelize(a, BorderLayout.NORTH), c);
               JLabel b = new JLabel("BBBBB");
               c.gridx = 1;
               mainPanel.add(panelize(b, BorderLayout.NORTH), c);
               JEditorPane d = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 2;
               mainPanel.add(panelize(d, BorderLayout.CENTER), c);
               JEditorPane e = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 3;
               mainPanel.add(panelize(e, BorderLayout.CENTER), c);
               index++;
     public CGridBagLayout2() {
          super("GridBagLayout");
          mainPanel = new JPanel();
          addComponentsToMainPanel();
          scrollPane = new JScrollPane(mainPanel);
          setContentPane(scrollPane);
     public static void main(String[] args) {
          Frame frame;
          WindowListener exitListener;
          exitListener = new WindowAdapter() {
               @Override
               public void windowClosing(WindowEvent e) {
                    Window window = e.getWindow();
                    window.setVisible(false);
                    window.dispose();
                    System.exit(0);
          frame = new CGridBagLayout2();
          frame.addWindowListener(exitListener);
          frame.setPreferredSize(new Dimension(1000, 800));
          frame.pack();
          frame.setVisible(true);
}Many thanks in advance, I'm getting crazy on this one :)

Ok, thanks for this information, I thought I had seen this happening in the past when embedding a component in the center area of a JPanel with BorderLayout.
Anyway, as I said I tested with JScrollPane as well and it does not change anything.
Here is the code modified:
@SuppressWarnings("serial")
public final class CGridBagLayout2 extends JFrame {
     JPanel mainPanel;
     private final JScrollPane scrollPane;
     private JPanel panelize(Component component, String localization) {
          JPanel output = new JPanel(new BorderLayout());
          output.add(component, localization);
          return output;
    public void addComponentsToMainPanel() {
          mainPanel.setLayout(new GridBagLayout());
          GridBagConstraints c = new GridBagConstraints();
          c.weightx = 1.0;
          c.fill = GridBagConstraints.BOTH;
          String TEST_BIGTEXT = "<html><body><h2>Path</h2>toto/tutu/tata/TestN<h2>Prerequisites</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah<h2>Description</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah blah\nblah blah blah <br/>lah blah blah <br/>lah blah blah blah blah blah blah blah FIN</body></html>";
          for (int index=0; index<10; index++) {
               c.gridheight = 5; // nb Testcases for this test
               c.anchor = GridBagConstraints.FIRST_LINE_START; // align all the components top-left aligned
               c.gridy = index;
               JLabel a = new JLabel("AAAAA");
               c.gridx = 0;
               mainPanel.add(panelize(a, BorderLayout.NORTH), c);
               JLabel b = new JLabel("BBBBB");
               c.gridx = 1;
               mainPanel.add(panelize(b, BorderLayout.NORTH), c);
               JEditorPane d = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 2;
               mainPanel.add(panelize(new JScrollPane(d), BorderLayout.CENTER), c);
               JEditorPane e = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 3;
               mainPanel.add(panelize(new JScrollPane(e), BorderLayout.CENTER), c);
     public CGridBagLayout2() {
          super("GridBagLayout");
          mainPanel = new JPanel();
          addComponentsToMainPanel();
          scrollPane = new JScrollPane(mainPanel);
          setContentPane(scrollPane);
     public static void main(String[] args) {
          Frame frame;
          WindowListener exitListener;
          exitListener = new WindowAdapter() {
               @Override
               public void windowClosing(WindowEvent e) {
                    Window window = e.getWindow();
                    window.setVisible(false);
                    window.dispose();
                    System.exit(0);
          frame = new CGridBagLayout2();
          frame.addWindowListener(exitListener);
          frame.setPreferredSize(new Dimension(1000, 800));
          frame.pack();
          frame.setVisible(true);
}Edited by: eric_gavaldo on Sep 15, 2010 2:18 PM

In Lion, how do you bypass managed prefs when logging on?

in Lion, how do you bypass managed prefs when logging on?

Ahh, that's a Lion Server question...sorry, can't help.
Someone else hopefully will be along to answer for you.
EDIT: won't help you in the short-term, but long term might be worth investing in this:
http://shop.oreilly.com/product/0636920022664.do

Overrun by modplsql logs How to control or manage

Similar Messages

Maybe you are looking for