Oversaturation problems when opening in RAW

I'm just learning about color profiles and management right now, and can't figure out the cause/solution to this problem.
Here is a screen shot of one image as it appears in Bridge - the one on the left is from the camera import, the one on the right is after it was opened in PS RAW and saved. The same problem carries over to PS5, and it appears as soon as the image is opened. It is not a result of saving or editing.
I am trying to include the metadata, since I'll bet someone asks for it, but I have no idea how to copy and paste it. I've looked - my tolerance for frustration has been exceeded.
Thanks for any help.

Assuming you're seeing the difference in the preview of a raw file from your camera and the result of a conversion, let's start with a few basic questions.
How have you set Bridge to display your thumbnails?
What kind of monitor do you have, and have you calibrated/profiled it?  If so, please describe how.
What Camera Raw camera profile are you using to do your conversions?  Do you realize that previews or JPEGs generated in your camera should not, in general, be expected to match very closely color-wise with Adobe conversions?  Adobe does supply some profiles for Camera Raw for most cameras that match better than the Adobe Standard profile.
Perhaps grabbing your entire screen - ideally showing the color mismatches in context - and posting the whole thing here would help with further understanding.
-Noel

Similar Messages

  • How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

    how to solve the problem when opening program illustrator cs6
    ERROR: 16
    It is WINDOWS 8.1 / 64 BIT
    help please

    Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
    02/14/14 07:20:26:474 | [INFO] |  | OOBE | DE |  |  |  | 8860 | DEVersion: 5.0.0.0
    02/14/14 07:20:26:475 | [INFO] |  | OOBE | DE |  |  |  | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
    [    8860] Fri Feb 14 07:20:26 2014  INFO
    ::START TIMER:: [Total Timer]
    CHECK: Single instance running
    CHECK : Credentials
    Load Deployment File
    CHECK : Another Native OS installer already running
    Create Required Folders
    Assuming uninstall mode
    Lookup for master payload
    [    8860] Fri Feb 14 07:20:26 2014 ERROR
    DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
    [    8860] Fri Feb 14 07:20:26 2014  INFO
    :: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s), 0 warning(s)
    ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    Exit Code: 33 - The product is not installed, cannot uninstall.
    Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

  • Lower quality when opening canon raw w/ aperture instead of canon software

    hi,
    i just shoot a two days performance with a canon 5d, raw files and imported successfully all images into aperture. at first everything looks good but if i use the canon digital photo professional software that came with the camera i get better saturation, contrast, and detailed images. the difference is very visible if i use photoshop (which i always do).
    why is aperture not having a similar quality images when opening canon raw files?
    is there anything i can do to make my workflow easy. i feel now that i have to use aperture only to select the best images. when i got my selection, i reopen the selected raw files (from the memory cards) using canon software, and then transfer all converted raw's to photoshop.
    any ideas to make my workflow lighter without compromising quality?
    Thanks

    ejamas,
    A few things to keep in mind -
    *DPP vs. Aperture: Image previews when images are not at 100% -> DPP will appear much sharper/crisper then they actually are. You need to view at 100% to see the image accurately. Aperture will appear softer than they actually are (especially in comparison to DPP). Again, you need to view at 100% to get an accurate sense of how the image will look.
    *As others have said. If you've customized the settings in your 5D then DPP will honor those. Aperture will not. That's the case with any third-party raw convertor.
    *Images in a third-party convertor (Aperture, ACR, C1, Lightroom, etc.) will never match the OEM convertor (DPP, Nikon Capture, etc.) exactly. They use different color engines.
    *Your findings to not mesh with my experience per se. I shoot with 1Ds M 2's and have found Aperture, in general, to be the way to go. The color is excellent, the tonal range far exceeds that of DPP and the controls in Aperture have far more finesse than anything in DPP. It's not as crash prone as DPP and if Aperture does crash you don't loose your work from that session (in DPP you loose anything done since your last save). Like any raw convertor you need to learn it inside and out before you draw any conclusions about it.
    *I assume you are working on a color calibrated monitor and have all your color management ducks in a row?.....
    Jon Roemer
    http://www.jonroemer.com

  • Strange problem when opening word doc situated in WLS virtual dir

    Hi all,
    we have a strange problem when opening word doc
    situated in C:\Oracle\Middleware\as_1\forms\webutil
    we put some word docs there and tried to open from forms using for example web.show_document('http://wp0606:9001/forms/webutil/mug00103.doc', '_blank');
    no problem using FF, however in IE8 the word doc is shown in its binary format, this also happens when we try to open the doc in IE8
    however when we google and search for instance for a test.doc and then click on this url a file save dialog is shown
    that's why we believe that this might be due to a configuration issue of WLS
    any help would be greatly appreciated
    Kr
    Martin

    I think you have 2 ways to go here. Figure out what html is from wherever weblogic gets it, meaning you have to delve into the docs, snoop
    around in directories and find what it must be sending (This is going to be unavoidable if you are going to change what weblogic is doing.
    Sooner or later you have to try to figure out where it gets this stuff from)
    or
    you can experimentally snoop on your url with a tool like wget or curl. These are fundamental web tools.
    The latter is always a useful thing to be able to do. (you need to formulate a query to get the content-type).
    Whoever managed to get weblogic to serve any files in the first place probably can figure this out.

  • Problem when opening "Mail"

    Dear members of the Apple Community,
    After transferring my files and my profile on my new Macbook pro, I keep encountering a problem when opening "Mail". Each time I try, the app asks me to choose a mail account to add, but I already added the ones I normally use. I can either create/add this new account or click the "cancel" button. I cannot use the program (the main functions are not available). But if I try to add a new account, Mail does not upload the new messages for my existing accounts and if I click "cancel", the application simply close itself. What could I do?
    Thanks a lot to your help.

    It might be worth running Disk Utilities and then Repair Disk Permissions to see if that resolves the problem.
    Chris

  • I have a problem when opening a profile on Facebook. when I open the main page and facebook all ok but when I try to open your Firefox profile my block! what the problem ????? before me it was happening but now when I installed Firefox 4

    I have a problem when opening a profile on Facebook. when I open the main page and facebook all ok but when I try to open your Firefox profile my block! what the problem ????? before me it was happening but now when I installed Firefox 4

    WiFi signals get stronger the closer the machine is to the router and the less interference/blocking of the signal like via walls with metal in them or of thick concrete.
    Since the signal emanates outwards in a sphere, your supposed to place the wireless router in a central location in the building so it covers all areas.
    The power of the router also has a affect, if your router is old or something not that powerful like a Airport Express, it doesn't have the ability to filter out other signals or enough punch to get through walls etc. or cover a large area as effectively.
    If you buy/have a powerful router of newer make and have issues where there is metal in the walls or thick concrete, then you can buy something like OpenMesh and by using Ethernet cables from the back of the router, extend the WiFi signal into other rooms and areas past the blockage.
    https://www.open-mesh.com/

  • I have a problem when opening author book samples in iPad they dont open at the first page,

    i have a problem when opening author book samples in iPad they dont open at the first page, they open further in, can you explain what i need to do to correct this , Ron Ritter

    Book? I thought you said sample?
    Not sure how that is possible, sorry.
    How many users out of the total downloaded are having this issue?

  • Camera raw doesn't open when opening a raw file in photoshop

    I have a mac mini and am using the latest version of lightroom and have an EOS70d. The problem I experience is that when I open a raw file from lightroom it goes directly into photoshop without launching the camera raw plugin and when I manually launch the camera raw plugin from within photoshop, i do not see the details from the metadata in the image, such as colour temperature etc and there is no blue link at the bottom of the screen. I have tried the version of camera raw included in photoshop asnd the latest beta version, it's the same in both and also the same on my windows machine. I have also tried with raw images from my other cameras including ones taken a long time ago and that have previously opened in camera raw and they don't. Please help
    Graham

    As I said, read my post "Send me both ses files (no media) via my aatranslator dot com dot au web site".  I made no mention of saving "frozen track SES files without any media".
    I understand your frustration but I only made an offer to assist.
    Now if you want me to have a look at your ses file to see if I can work out what is going on then send it to me without sending any of the media associated with it. 
    If not I'm happy either way.
    BTW
    The idea of sending 2 ses files is to compare the one which can't find the frozen track with one that has just been saved and apparently includes the frozen track.

  • Error when opening Canon Raw images.....Photoshop CC2014

    Hi,
    tried already in the german forums without answer, so will try it her
    System:
    macbook pro 2012, Core i7
    16GB Ram
    after upgradinf to 10.10. full and the upgrades for Photoshop i have the following problem,
    this occured 4 times now.
    When double clicking a Canon Raw Image (.cr2 file) Camera Raw 8.6 opens.
    Now i can adjust the pic - and/or can open it into Photoshop
    worked fine so far....but not always since the update
    If i do so, sometime the pic will be opened like this
    is here a photoshop pro aware of this error?
    So far i did NOT reinstall Photoshop.
    Its the only application i use (and PTGui sometimes)
    happens since the last updates
    The only thing i did is: also using (at this time only installed) Lighroom. Have to look how it works first
    Ideas or suggestions?
    Thanks
    Frank

    I have made a few more observations.
    I can actually open Camera Raw if I click the "Open in Camera Raw..." icon i Bridge.
    In Camera Raw I can save files as .psd for example, and also open them in Photoshop. I still get the error when I try to open Camera Raw settings.

  • Colour problems when opening PEF files in ACR

    I have the problem that when I open a (Pentax) raw image in ACR the colours (particularly blue it seems to me) go awry.
    If I open  the image in Pentax Photo Browser the image is displayed correctly.
    If  I convert the image to jpg in Pentax Photo Lab the image is displayed  correctly.
    If I open this jpg in Photoshop Elements 8 the image is  displayed correctly.
    It's only when I open the raw files directly in Photoshop  that the colours are wrong.
    Opening the raw file in Elements opens the  'Camera raw' window, which has various adjustment tabs with sliders.   What ever adjustments I make in this window, I cannot seem to  replicate/keep the correct colours.
    I have tried resetting and then using the Camera Raw Defaults.
    I've also tried some other adjustments, i.e. setting the white  balance to 'Daylight' (as this is how the camera is usually set) and the  camera calibration to 'Camera Standard' - I can get the blue somewhat  close, but then the yellow is out.
    So, at the moment, I have to process  the raw files in Pentax Photo lab, then open and edit them in  Photoshop.
    It would be nice to be able to bring single PEF files into PS without having to convert them first.
    What  on earth am I doing wrong?  Or is this a genuine limitation with ACR?
    Any help/guidance would be appreciated!
    Regards,
    Dingo.

    Jim Hess,
    That's helpful advice, thank you.  Sadly, I've been unable so far to make adjustments in ACR that are anywhere near (IMHO) the images as displayed in Pentax Photo Lab.  Even the (truly awful) MS Office picture manager provides more consistent colour.
    I'm still convinced that I'm doing something wrong.  I know that Elements is much cheaper than full Photshop (something that I simply can't afford to buy) but to be so wildly out is unbelieveable.
    For example, I took a photo of a jet passing overhead, with (out of focus) leaves on a tree, then went in and loaded this onto my computer.  IMHO the Pentax Photo Browser showed the scene pretty much as was. After converting to jpg in Photo Lab, I loaded into PSE 8 and Office picture manager - both display consistently with the raw image displayed in Photo Browser.
    However, when I loaded the same raw file into ACR the blue sky has a greenish tinge that I can nearly adjust out, but either way, the green leaves look muddy and the colour is weak.  If I get the leaves good, then the blue is very over saturated.  When I compromise both the blue and the green, the aluminium fuselage on the jet has a red/purple tinge.
    Some more information:  Monitor is calibrated (I borrowed a colleages Huey).  Camera and PSE are both set to Adobe RGB.  I print to a Epson R1400, with colour management handled by PSE, and the colour matches the screen very well.
    Any further advice much appreciated.
    Regards,
    Dingo.

  • Aperture 3: problem when re-processing raw files to the latest converter

    After converting to Aperture 3, many of my Nikon D80 raw files are coming up with the message:
    "This photo was adjusted using an earlier version of Apple's RAW processing."
    Aperture 3 offers a "Reprocess" button next to the message. Every time I click it, the images gets messed up with a big spike in the highlight end of the green channel. Is this a bug? Anyone else seeing this?

    I faced the same problem when importing from my card reader. I chose to save the A3 library on a removable disk. The importing took ages to finish, and then all the pictures had a green color. It said that the pictures were processed using an earlier Apple Raw processor, and I had the Reprocess button. I did that and nothing changed.
    I restarted A3, and now my project has disappeared even though it is available on disk.
    I opened the original library on my MB hard disk and the photos showed fine.
    I'm going to retest this, by importing the pictures to the default A3 library, maybe it will then recognize my pictures and process them correctly.
    EDIT: when importing to the default Aperture Library (not the one on a separate drive), it's very fast, correct, and no problems. I'll guess I'll have to backup the old way...
    Message was edited by: ninofrewat

  • How to change preference setting in Photoshop CC 2014 to not automatically lauch Adobe Camera Raw when opening Nikon raw .NEF file

    When I launch Photoshop CC 2014 and then open a .nef raw file it launches Adobe Camera Raw and I click Open Image, then I "Convert to Smart Object" then launch Filter > Camera Raw Filter.  Is there a preference somewhere for raw files that just bring you right into Adobe Photoshop without stopping at Camera Raw first?  Thanks!

    Gene,
    Ah!  Okay, makes sense now.  I just learned tonight that some features are not available when using Camera Raw as a Smart Filter.  One being Lens Profile Correction.  So it makes sense to have have Camera Raw open right off the bat to make some tweaks first then continue on.  I found the below on the Adobe website.  Thank you so much!! 
    Note: The following features are not available when using Camera Raw as a Smart Filter (that are normally available in Camera Raw), primarily because they don’t make sense in the filter context: Workflow options and preferences, crop and straighten tools, rotation tools (rotate left/right buttons), snapshots, camera and lens profile corrections.

  • I have problem when opening a pdf page, my mouse control is hijacked to that tab when im on other tab, i cant scroll or use the middle rollling button, i have to click at the pdf tab then my control over the mouse middle button is restored.

    I think I have this problem even on earlier version. The thing is I set open link in new tab and not switch over to the opened tab. My habit is to open a pdf page in the background and let it load first. What happen is that when the pdf page finished loading ( i do not set to download it), it hijacks my middle mouse button control. When i scroll down or scroll up on my original tab, it wont scroll on the tab, but insttead it scrolls on the pdf tab. I have to click on the pdf tab, then i can use the scrolling function on other tabs back. As for when i opened several pdf tabs, it seems i have to click on the tab that just finished loading, that means several times until they all finish loading. It has been getting on my nerve lately. And all pdf trouble i search from google led to unable to open pdf, firefox hang or crash when opening a pdf and the likes.

    core-el, i don't see the advantage of that or i can't figure out how i'm supposed to use it. for starters, i have to click the mouse in order to get "add bookmark here" to open, which is no different than clicking on the star in the location bar, or right-clicking on the page. there are also options in the bookmarks toolbar, but they all require clicking the mouse & holding down the right button, etc.
    my goal is to use keystrokes only. typing on the keyboard, using both hands, using the space bar & my left pinky finger to tab over are all painless routines for me. as soon as i have to take my fingers off the keyboard & use the mouse, the pain begins.
    as i said, in older versions of firefox, all i had to do to bookmark a page was click ctrl>d, then tab over & arrow down, when appropriate, to find the folder & add the bookmark. for me, as a touch-typist whose speed is between 60 & 80 wpm, this is lightning fast.
    if i have this wrong, please correct me. i just see it as more mouse clicks that don't save me time or pain.

  • Strange problem when opening new message.

    I have a rather annoying problem when I open a newly received SMS from a particular contact (lets call him Bill).
    When I open the new message from Bill, either by swiping to unlock or touching a banner message at the top of the screen. Instead to being shown the message itself, I will automatically be taken to the 'start new message' screen with none of our message history (i.e. as if I am starting to type an entirely new message to Bill)
    I can then cancel this and return to myself and Bill's normal message stream.
    Any ideas how to get around this annoyance? Thank you.

    I think you have 2 ways to go here. Figure out what html is from wherever weblogic gets it, meaning you have to delve into the docs, snoop
    around in directories and find what it must be sending (This is going to be unavoidable if you are going to change what weblogic is doing.
    Sooner or later you have to try to figure out where it gets this stuff from)
    or
    you can experimentally snoop on your url with a tool like wget or curl. These are fundamental web tools.
    The latter is always a useful thing to be able to do. (you need to formulate a query to get the content-type).
    Whoever managed to get weblogic to serve any files in the first place probably can figure this out.

  • Problem when Opening a file in the Function Moudle

    Hi,
    I was encountered a Problem , when i am opening a file from the function Module,
    But when i tried the same code in the ABAP Editor it was working fine.
    Is there any Difference from ABAP Editor & Function Module Editor
    (ex : Un-Code  Etc ) ...
    Let me know if your have any conserns.  Thanks In Advance.
    Regards
    Nag

    Hi,
    In the FM'S u might have declared the import,export,tables parameters.So u have to use these parameters in the source code editor of FM.If u don't use any of these parameters and try to use any other parameters which also not declared in the FM source code,then u will get the error.pz check the parameters u r using in the FM....
    Regards,
    Nagaraj

Maybe you are looking for