OVerseas SAP BI/HANA jobs and Visa possibilities.

HI All,
can anyone please tell me job market for SAP BI/HANA in overseas and what is employer expectations.
is it posisble to get a job for other countries and suggest me how to apporach.
Regards,
Sakthivel S

Job opportunities are available in the overseas market. Get a certification in BI/HANA as you mentioned, then you can try for the applying the job.
if you have experience, possibility of getting job is easier.
apply jobs through job portals
Thanks
Sudhir Krishna Kumar Singh

Similar Messages

Creating Logic and modeling for SAP BW datasource in SAP HANA views and SLT

Hi to all,
I have small question.
We have BW system and SAP ECC as source system and to get data from SAP ECC source system we are using SAP ECC Standard data source.
Now we required to, create modeling in SAP HANA by use of HANA View and get data from SAP ECC source table via SLT.
So we can replicate same modeling,as we done in SAP BW system.
But my question is that, as SAP ECC standard data source hit multiple table and do run-time calculation, before sending to SAP BI.
How we can derives such calculation and logic, in our HANA studio, because as we know in SLT data transformation can be done in limited way also
in view we can not drive such logic via SQL script ?.
Is there any way we can do such modeling and logic in SAP HANA ?
or
is there any standard document for this type of case, which we can use ?
Note: We don't want to use SAP DS or DXC for data loading to HANA, as we want it in more real time.
Regards
Pavneet Rana

Thanks for reply,
As SLT is based on ABAP, so we can write complex logic in it.
But if we talk about SAP ECC standard data source, they have complex logic, based on multiple table.
So we need to write code from scratch in SLT to derive same result. but it will be huge time consuming , and required good ABAP skills, also it will lead to bug in code.
Also it will reduce the real time performance of SLT, due to complex logic.
Second option is procedure via SQL script, which is again huge effort in term if logic and can lead to error/bug in logic.
Does we have any other way or architecture to do this is very simple way, with high performance and less error issue.
Regards
Pavneet Rana

Submit a SAP job and it is erroring out as "instance/client not found"

I am trying to submit a SAP job and it is erroring out as "instance/client not found"
as soon as I enter the instance/client value and click on next I am getting this error
please help

Hi,
Then maybe there is a problem with another parameter, and the error is obscured by this error message.
You did specify valid values for all other parameters ?
Maybe you can try the following:
- create a simple job in SAP, you do not have to execute it only save it
- import this job using RSI_IMPORT_CCMS_JOBS and specify the exact job name
- run the imported job (it will have the same name as in SAP) and see if this works
- if this works, try your job again directly from CPS and compare your parameters with those on the imported job (especially which ones are filled or not filled, that sometimes is more important than the exact value chosen)
Regards,
Anton.

Benefits/ Limitations when we use SAP HANA Extended and Standard products.

Hi All,
We are going to purchase SAP HANA media. Please let me know what are the benefits/ limitations when we use SAP HANA Extended and Standard products.
Thanks in Advance,
Vishall

Hello,
please check Master Guide (page 9 - chapter 1.6 Software Components)
https://service.sap.com/~sapidb/011000358700000604552011
There you can find edition comparison and detailed description.
To extract the short summary:
Platform edition = SAP HANA Database + Studio + Client + Host Agent + Information Composer
Enterprise edition = (Platform edition) + LT Replication Add-on (SLT) + LT Replication Server (SLT) + SAP BO Data Services
Enterprise extended edition = (Enterprise edition) + Sybase Adaptive Server Enterprise + Sybase Replication Server + Sybase Replication Server Agent + SAP HANA load controller
It depends on what licenses you already have and how do you intends to use HANA.
Platform edition = ETL via BO Data Services (you already have license for BO Data Services)
Enterprise edition = SLT and/or BO Data Services (including licenses)
Enterprise extended edition = all replication technologies
Tomas

SAP HANA : differences and costs

Dear All,
HANA is designed to enable faster ways to process data from business applications in real time, without impacting the underlying source system. I believe HANA will bring new and interesting opportunities to SAP. Which are the most important technical differences between HANA, BWA and BOEA? Which are the cost differences?
Regards,
Bob

Bob,
Here are my thoughts:
HANA: Here's my recommendation for the best in-class next-generation BI solution. Deploy HANA as a standlone server with two logical system partitions. 1st partition for standalone HANA modeling and 2nd partition to host HANA DB for BW 7.3. This way you get to exploit HANA performance for both SAP BW system as a database and also use the HANA power for standalone non-BW (ECC and flat-file) application that need good performance.
BWA: I would not recommend a BWA solution for a new BW implementation. Given the fact that SAP has announced recently that BWA 7.3 will be the last release for BWA. However, if there is a critical BW application in production that needs better performance, then BWA will be a quick fix solution. The cost difference between an SAP HANA solution and a BWA solution is narrowing down quickly. I do not want to go into details of cost.
BOEA (aka BOE Accelerator Version): Guys, there is some confusion here. BOEA does not support BWA acceleration for non-BW data source data. Meaning that if you are using BOEA (accelerated version) - you can load non-SAP and Non-BW data but can not accelerate the data using BWA unless the data is put in an SAP BW info provider (cubes,etc..). Only BW info providers in a BOEA solution can exploit BWA acceleration. Other data (non-SAP and Non-BW ) can only exploit on indexing capability of BOE internally but not the BWA. BWA portion of BOEA is specific to BW in the backend.
Also, please read my executive summary on SAP HANA @ http://www.sendspace.com/filegroup/u1AO5NidaMTYSD49JoHsjg
Regards,
Rama

_Patch level in SAP HANA Note and _Build No in SAP HANA

Hello Hana Gurus!
I need to know where can I find the patch level in the SAP HANA and SAP HANA Notes
For example, if I want to apply a note
http://service.sap.com/sap/support/notes/1964428
there is specified:
Software Component
Support Package
Patch Level
SAP HANA DATABASE 1.00
SP069
2
SP070
0
Ok. I read a lot of sources and understand the following:
To know the HANA Studio version:
Help->About SAP HANA Studio.
It will be like
Version: 1.0.27
Build id: 201205021925 (361805)
Here 1.0.27 means -> 1.0 version and Revision is 27 and Build No is : 361805
Re: From Studio, how to know the HANA DB Version
That is, if we apply 1964428 note, the system is upgraded to SP069 and SP070. Is that correct?
But what Patch Level means in this (and some other) note (value 2 and 0)?
Where I can check Patch Level in the HANA?
And, what are figures Build No indicate
UPD:
Here Re: Where we can check Patch leveles in HANA? referred to a certain table "M_HOST_CONFIGURATION". But in my system it does not exist. or tell me where to find it?
Message was edited by: Tom Flanagan

Hi Kirisetti,
please findanswers in italics
1)
I understand the database version and the studio version is not the same thing. But why do they match my system (see picture)? Or still the same thing?
By the way, to see the version of the database I used table SYS.M_DATABASE
A revision is released with all HANA components are part of the revision release and not just HANA DB server. So it is always ideal that you have all HANA components on same version as in your case. However is is technically feasible that you are usinga older version of Studio to connect to a newer version of HANA DB server. so Help-> About Studio would give you version of the studio and "select version from SYS.M_DATABASE" gives you version of the HANA DB server.
2)
and for the version and patch level
1.0.69.02 would mean HANA DB is on Revision 69 , patch 02
1.0.70.00 would mean HANA DB is on Revision 70
Soultion for the problem is to update your HANA DB to revision 69, patch 2 or Revision 70.
Did I understand correctly, if the note indicated Patch Level = 0, then we simply speak about updating to Revision, implying that no Patch Level? Or how it can be understood?
I'm assuming here you wish to know if you are downloading the right software for the update.
if there is a patch mentioned it is available as "Mantainence Revision <rev no>.<patch no>" for download and if there is no patch level mentioned(patch level = 0) they is avaliable as "Revision <rev no.>". Also update procedure for both Revision and patch is the same.
3)
Did I understand correctly, the first figure in the Build number (Build id) indicates the Patch Level? How it is possible to interpret the Build number (Build id) more? These figures represent something?
This build number is something that comes out of build repositiory. HANA version mentioned in all notes and guide refer to just the Revision number and patch level currently. You can ignore the build number

Where to download SAP HANA Studio and Client files

Hello all,
I am trying to learn SAP HANA and started watching the tutorial videos from SAP HANA Academy. Would it be possible for me to download the SAP HANA Studio and Client files so I can practice development on my PC? The video, HANA Academy - Installing the SAP HANA Studio and SAP HANA Client tools - YouTube, points to an old SAP Service Marketplace interface and I am unable to follow the instructions on where to get these files.
Thanks in advance.
Doods

Doods,
you can download HANA Client, Studio and Driver at:
SAP | HANA Developer Edition
cheers
m./

SAP HR load qualifications for job and positions

Hi Everyone.
I have one specific requirement, i have to create program to load qualification for a set of jobs and positions. can some one guide me if there is a function module or a BAPI or a BDC transaction to do it. For example rep RHPEPRFM. any help is greatly appreciated

Hi,
you can use RH_INSERT_INFTY.
Regards,
Amit
Reward all helpful replies.

Issue in SAP CPS for Job Interception

Issue in SAP CPS for Job Interception
Scenario:
After triggering a Process Chain in BW and maintaining the Job Interception settings in SAPCPS(Redwood)
(so that any job which triggers in BW by that Particular User is intercepted and not let it proceed further until the job is released in SAP CPS.)
Issue:
The Jobs are getting into Waiting status in SAP CPS(Redwood) even though there is no progress in loads in BW side. Also the Jobs are in Intercepted state even after releasing the Parent Job in SAP CPS(Redwood).
Please let us know how to go about it.

Hi Ramesh,
What you plan to do is called monitoring of process chains (ie. process chains not started from CPS) and this should be available in the latest version of CPS.
This requires the interception of only the BI_PROCESS_TRIGGER process, just as you have configured now, and other than that the following prerequisites:
SAP Note 1080558 describes the SP levels for the BW/BI releases
XBP 2.0 or higher
Redwood transport files must be loaded
ProcessServerService.SAP.XBPVariant license key
Maybe this helps,
Anton.

Run the Report as a Background job and Get the Output in Excel in Local PC

Hello Gurus,
I have one following requirement.
One should be able to run the report as a background job and it should be possible to get the report in Excel format, also when running the report in background. The excel report should have the same information and look as the current SAPreport.
Please provide some solution.
Any helpful answer get surely awarded.
Thanks a lot,
Varlanir

GUI_* WS_* Function In Background, CSV Upload
GUI_* and WS_* function modules do not work in background
When scheduling a job in the background the appropriate statement to read in your file is OPEN DATASET, and the file must be on the file system that the SAP server can see.
At anytime, a user can switch of the Personal Computers even though the job is still running in the background. Therefore GUI_* and WS_* function modules are not designed to work in that way, as they need to access your personal computer file.
To choose the correct download method to used, you can check the value of SY-BATCH in your code,
if it is 'X' use OPEN DATASET and if it is ' ' use WS_UPLOAD.
*-- Open dataset for reading
DATA:
dsn(20) VALUE '/usr/test.dat',
rec(80).
OPEN DATASET dsn FOR INPUT IN TEXT MODE.
IF sy-subrc = 0.
DO.
    READ DATASET dsn INTO rec.
    IF sy-subrc <> 0.
      EXIT.
    ELSE.
      WRITE / rec.
    ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET dsn.
*-- Open dataset for writing
DATA rec(80).
OPEN DATASET dsn FOR OUTPUT IN TEXT MODE.
TRANSFER rec TO '/usr/test.dat'.
CLOSE DATASET dsn.
What is the difference when we use upload, ws_upload, gui_upload function modules?
UPLOAD, WS_UPLOAD, GUI_UPLOAD, are used in BDC concepts. ie., Batch Data Communication.
Batch Data Conversion is a concept where user can transfer the Data from non SAP to SAP R/3. So , in these various Function Modules are used.
UPLOAD--- upload a file to the presentation server (PC)
WS_UPLOAD----    Load Files from the Presentation Server to Internal ABAP Tables.
WS means Work Station.
This is used upto SAP 4.6 version.
GUI_UPLOAD-------    Replaces WS_UPLOAD. Upoad file from presentation server to the app server. From 4.7 SAP version it is replaced.
How to Upload csv file to SAP?
Common File Download Upload Questions:
How you upload the data from text file to sap internal table? From my knowledge its by upload or gui_upload.
How you download the data from sap internal table to text file?
How you upload the data from xls (excel) file to sap internal table how you download the data from sap internal table to xls(excel) file.
You can upload data from presentation server to an internal table using gui_upload. Use gui_download to download from internal table to flat file.
Use fm ALSM_EXCEL_TO_INTERNAL_TABLE to upload data frm excel.
Use function module GUI_UPLOAD
The FILETYPE refer to the type of file format you need: For e.g 'WK1' - Excel format , 'ASC' - Text Format etc.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\test.csv'
   FILETYPE                      = 'ASC'
TABLES
    DATA_TAB                      = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.

Can U set breakpoint within a batch job and look at variables?

Hello friends,
I am trying to solve a problem that occurs within a program / transaction which can only be executed in background. The transaction in question is FPCOPARA and apparently this program cannot be executed in foreground.
If I understand well, we cannot set breakpoints within a background job and as a result we cannot inspect variable etc. during job execution. So the question is how to achieve the same goal within a batch job? How did you do it? As this is a standard SAP transacrtion, no program modification can be applied.
Your help is greatly appreciated.

Hi......
After u have executed ur batch job..
go to sm37 >>select ur job using checkbox>>enter 'JDBG' in transaction box and press enter
now debugger will start ..initial it will go through system code..after after a while the debugger will reach to your code and den you can debug the remaining report....
all the best
regards
vivek

SAP CRM 7.0 and Enterprise Portal

Dear SAP Gurus ,
I have question about the New CRM WEB UI and integration to SAP Enterprise Portal .
We have been using the SAP Enterprise portal for accesing the SAP CRM functionalities before (eg create Opporutnites and Sales Order ). But with the New SAP version(7.0 and 2007 ) its possible to have its own portal.
Now the question is it possible to integrate the NEW SAP WEB UI into the existing portal ? Eg: If we want to have link in Enterprise portal with the Sales Order create functionalyt direlty without going into the stand alone CRM WEB UI . Would it be possible to directly call the Sales order service WEB UI in enterprise portal . Right now what we see is that the NEW CRM WEB UI is stand alone and for these type of fuctionalites the user need to login to the NEW web ui and then go to the create sales order screen .
Is it possible to directly embed the new UI components in the existing SAP enterprise portal ?
Many Thank for your kind advise !
Best Regards,
Ankur

Ankur,
Once you have correctly integrated to Portal following the SAP Note, you will no longer see the CRM Navigation. They will be Portal Navigation. If you have read and understood the note, it will be clear. On an overview, let me explain the steps involved.
1. You create a CRM role (based on some job role) say "Sales Rep" and have configured the CRM Web UI for all the navigation and applications. Like Account maintenance, Opportunities, Sales order create etc. etc.
2. Following the note and running a CRM transaction, you will now "Export" this CRM role to an external file. This file is very similar to a "business package". All the portal roles, pages, iVeiws etc. get created.
3. You will now "Import" this into your portal. Again follow the notes to know the loaction.
4. In the portal, you will assign this "portal role" to your users.
When these users log on to portal, they will see Portal Navigation (not the CRM navigation). So, the main point lies in defining the CRM role and get it working.
Hope you get the point....
Easwar Ram
http://www.parxlns.com

How to connect an non-hana-ewm with an Hana-ECC and vice versa

Hello,
for our migration project planning I am wondering how to connect EWM on SAP with ECC on Hana and vice versa.
As it is, both systems are (productive) on non - hana with actual SAP-Release and have to be migrated.
The background of my question: we may be not able do the "big bang" thing to migrate ERP ECC607 and EWM (with special Add-Ons) at one point to Hana (DMO) and therefore may need an interim solution. I checked ETL and LTS as "connectors" but they - from my point of view - are one-way solutions from EWM to ECC/Hana -not bidirectional.I Found some questions concerning the same theme in the net but no solution at all till now..
How about BODS ? (Didnt work with it yet)
Best regards,
Ronald

Great. So I have to either install OS X, or buy a new mcahine. Can OS X run on a G3 without grinding to a halt?
By the way, I cannot get the iPod to even mount when connected via firewire. The USB/firewire PCMCIA card does not have drivers for OS 9. I thought that this support was built into OS 9. The USB port works (although the iPod will not mount when connected via USB either). Any ideas?
Thanks

Cannot edit SAP or WebService Jobs via Client (5.3)

When I try to edit or view our SAP or Web service jobs in the Client (5.3), it
brings up the job details but there is no SAP or web service tabs shown and the
Job name and other details of the job are blank.
From the same computer, I can successfully edit sap/web service jobs pointing at
our other database alias' (we have 2 QA environments). It is just the one
environment that is having this issue.
Our license is ok and the SAP and WS connections are fine. The SAP and WS jobs
are also running fine.
This is not the issue where the client machine's SAP and WS Adapters are getting
"confused" BECAUSE we CANNOT open sap/ws jobs from ANY machine. I am sure that
this has to do with settings on the server or in the database.
We have been able to open these successfully in the past.
Any ideas from anyone having this same experience would be greatly appreciated.
Thanks

As Jon has mentioned, you need to add the command management-access inside command to be able to ping, SSH, ASDM into your firewall.
Please remember to rate and select a correct answer

Transfer to accounting, to pay Employee vendor and Visa vendor accounts.

If the company pay Employee via vendor account, and also uses VISA and post to Visa vendor account.
The question is that
There would be one FI document generated with 2 vendor accounts (Employee and Visa) ?
Or separate FI documents for Employee vendor and Visa Vendor?
As the company wants to issue separate invoices for employee and Visa

we use the same process, posting happens as mentioned in the below link. we need to use clearing account concept
http://help.sap.com/saphelp_470/helpdata/en/78/f9b3aa9fcfe24a8bb0384c6ae2215c/frameset.htm
see the example at the end of the page
Regards,
Anantha

OVerseas SAP BI/HANA jobs and Visa possibilities.

Similar Messages

Maybe you are looking for