Overview fields used per document type in MM and FI

Hello All,
iIs there a possibility to get an overview of all fields used (mandatory, optional etc.) for each document type in MM and FI? I want to create a list which fields per document type are used in both MM and FI and which are only used in MM or FI.
Thanks in advance for answers!

Hi,
You can point out all the fields with
1) At the time of defining Screen lay out for purchasing (NBF) in MM for GR-IR Control.
2) or you can tally which tables are conjugated with MSEG from SE11.
Might this will clear you.
regards,
Ninad

Similar Messages

ALV Grid: Alternate Field Catalog per Line Type possible?

I'm using the ALV Grid Classes: Is it possible to change the Field Catalog per line type? I have two different line types: 1) Interspersed headers and 2) data lines. The Interspersed headers should have no_zero = 'x' and the data lines no_zero = space.

It can be done by REUSE_ALV_HIERSEQ_LIST_DISPLAY in classic ALV .
Alternately, it can be done by ALV object model. Try SALV* and look into sample programs.

Field selection per movement type

Hi,
Vendor is an optional entry for 201 movement type. I've checked it from
SPRO->Materials Management->Settings for Enjoy Transactions->Settings for Goods Movements (MIGO)->Field Selection per Mvt Type
and it seems to be an optional entry thus its not asking vendor in MIGO, but when I go to MB1A tcode, there seems the vendor is required. How could I change that? Is there a special transaction for MB1A's field selection?
Thank you
Irem

Hi
You need to check if any screen variant has been activated fot the Trnsaction MB1B.
Using screen variants also we can activate such checks.
Check in transaction SHD0.
Here enter the transaction code and check the screen variant that is active.
Thanks & Regards
KK

Field selection on document type level in ME21n

Hi All,
from where i can make field mandatory in ME21N at document level. like i want to make an field mandatory for document type UB.
regards,
qsm sap

Hi,
First check The Field Selection Key for doc type "UB"
in path
SPRO->Materials Management->Purchasing->Purchase Order->Define Doc types ( For Standard it is "UBF")
Then go to path
SPRO->Materials Management->Purchasing->Purchase Order->Define Screen Layout at Document level
HereSelect the Field Selection key & Double Click that..
Then you will see different tabs, just click on them, it will take you to Fields where you need to Tick Reqd, Optional , Display
as per your requirement...
Thx
Raju
Edited by: Manohar Raju on Mar 2, 2008 9:44 AM

Po number range as per document type

Hi All,
How to configure PO number range as per document type? Like i want my service POs (doc type FO) with different number range than with document type NB.
Regards,
Shailendra

Define document types. Method
Transaction: SPRO
Menupath -> Materials Management -> Purchasing -> Purchase Order -> Define document types
Select document types:
Enter - Document type (NB) , Type description (Std PO with delivery) , Item interval (1) , NR rng as. (Number range assignment) as 01, Field selection (NB).
Save the details entered.
Then go to Define Number range (OMH6) or menu path Materials Management -> Purchasing -> Purchase Order -> Define number range
Select Interval
Define NO as 01 (Number range assignment already maintained in document types), then give from range, to range. Current number is 0
Hope you have understood and now you can link with number range with document types.
Any clarifications, please revert back.
Thanks,
Ravi

Append list values under Field selection per Mvt type (MIGO)

Hi Experts,
Can we append list of values for u2018Field Nameu2019 in case of Setting for goods movement (MIGO), under Field selection per Mvt type. We want to append values for 101 Mvt type.
Current values are
CUSTNAME Customer
EXVKW Sales Value
GRUND Reason for Movement
LIFNR Vendor
SGTXT Text
WEANZ Number of GR Slips
WEMPF Goods recipient
Regards,
Praful Mankar

Hi pafulmankar
If you find the solution, please share with me. I do have the same requirement
Thanks

Define Workstation Application per document type

Hello friends
Is it possible to restrict some worstation application per document type?
I mean, for a specific document type only XLS files are allowed?
Thanks in advance
Luis Ike

Hi Luis,
yes you can define it in the customizing:
Logistics - General - Product Lifecycle Management (PLM) - Document Management - Control Data - Define Document Types
Select a document type and check details. There you can define a default WS application.
If you define it to XLS and you do not assign XLS to any other document types then I think you can reach what you want.
Best regards
Tamas

Default document currency as per document type for sales order

Dear All,
We are facing problem in Default document currency as per document type for sales order,
Our requirement is not to give currency in customer master & set it as default document currency as per document type,
for example: Document type 'OR' default currency 'INR',
                     Document type 'ZEU' default currency 'EUR',
                     Document type 'ZUS' default currency 'USD',
                     Document type 'ZNP' default currency 'NRP,'
                     Document type 'ZAF' default currency 'RAND,'
Is it any how possible in standard setting ?,
Regards,
Sai

Hi,
The system proposes the sales document currency from the customer master record of the sold-to party. You can change the currency manually in the document or change in currency in customer master. If you change the currency, the system recalculates prices for the entire document.
to determine different currrency in sales docuement you need to write an user exit and then overwrite the docuement currency copied from customer master. Try user exit 'USEREXIT_MOVE_FIELD_TO_VBAK' under include MV45AFZZ for this change.
with regards
vivek.

How to create a new document type for PO and Requisition

Hi All
Can you please help me with the steps of creating a new document type for PO and PR. Also the steps that need to be update for the procure pay cycle to work properly.
Once the document type is been created. I want to create the PO referecing the new PR and PO document type.I am new in MM.
Thanks, Ros

Hi,
1. You can create new PR and PO docu types at the following path:
For PR docu type:
First you need to create number range for docu type or you can use existing number range also. The path for creation of no. range is
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Number Ranges
Then create PR docu type at below path and assign no. range to PR docu type here only
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types
For PO docu type:
Follow same procedure as mentioned for PR docu type. Path is
SPRO>Materials Management->Purchasing->Purchase Order->Define Number Ranges
SPRO>Materials Management>Purchasing->Purchase Order->Define Document Types
If you want to create PO referencing new PR docu type, link the PR docu type to PO docu type at below path:
SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types--> Link purchase requisition - document type
Regards
Chetan

Retriggering Release strategy for PR with Document Type, Company Code and Price Range as Characaterstics

Hi Friends,
I have a issue to fix. The issue is releated to PR.
There are some PR's in the system which has wrong release strategy picked up or wrong approvers picked up due to some congif change. now that the config changes are rectified correctly, we need to find a solution to correct the PR's which got affected due this.
I have to retrigger the release strategy for all the affected PR's.
The characterstics which we have consider for release strategy is Document Type, Company Code and Price Range.
Can anyone suggest how can we retrigger the PR in bulk or individual to all the affected PR's, so that it picks up correct release strategy as per new config changes.
Regards,
Manjunath K

Hi,
Refer the discussion to triggers release again on release code addition/change in release strategy.
release code is changed on PR release strategy - old PR can´t be approved
Regards,
Biju K

Different Document types for Reciepts and payment-Cash Journal

Hi Gurus,
Please tell me how can we make different document types for reciepts and payments in cash journal and where we need to assign it??
Please revert asap.
Thank You

Hi
While posting the transactions by using FBCJ T.Code u can select the Receipts or Payments or Expenses then the documents will be genereted. FBCJ02 is the T.Code for no.range there u can assign the no.range intervels.
Shammi

Limit Document types by plant and user

Hi,
I need to limit document types between two plants meaning a user should be able to use only one document type when buying from another plant but have all other types available for use generally.
Example when user A from plant 1000 buys from plant 2000 he can only use UB Purchase Order type but for all other plants he can use any document types.
Points will be awrded.

You can limit the document type for each buyer in the Authorisation profile for the buyer. This is done by SAP Authorisation team. T code: PFCG
Please contact your SAP Authorisation Team or SAP BASIS Team.
G.Ganesh Kumar.

Mapping of invoice document type in SRM and Backend

hi,
I need to map invoice document type in SRM and backend. We are in SRM5.0.
e.g. when we create no PO invoice , we need to select document type from drop down and that document type should be replicated to backend invoice document type.
1. There is no list in drop down of invoice document type ( RE/RN)
2. How it will be replicated to back end document type when enter document type instead of selection?
If anyone came across this, pls let me know.
regards,
Rahul Mandale

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Order type field for PO/Document type field for PR

Hi Everybody
a) In Purchase Order creation screen (ME21)-for order type field -NB(standard order) is coming as default-How to make it blank(since we are using plantwise PO NOs)
b)In purchase requisition screation screen(ME51)also Document type-NB(standard order) is coming as default-How to make it blank(since we are using plantwise Purchase requisitions)
Thanks in advance
Joseph David

Simple,In order of ME21/ME51,Press F4,Select Required order/requistion type,Add it to Favourite list
or else
Create a transaction variant for ME21 & ME51 using t.code SDH0.
Transaction Variant - A Step by Step Guide for Creation,Check below link,
http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation
Edited by: Jeyakanthan A on Apr 2, 2010 5:42 PM

Assignment field in WA document type

Hi,
In the FI document type WA (Goods issue), we would like to populate the material document number in the assignment field of the accounting document when it is posted. Is there any user exit to acchieve this ?
min

Hi Raja,
What kind of documents are these? If they are billing documents, the assignment and reference fields are copied as per the configuration done for SD document copy control. If these docuemnts are uploaded documents or coming through an extenal system, the abap program must be populating these values based on sime criteria.
Kindly check let us know the kind of documents and how the entry happens.
Thanks and Regards,
Anit

Overview fields used per document type in MM and FI

Similar Messages

Maybe you are looking for