Overview Interactive script, Chapters in Script, Direct Navigate to answer.
Hello,
in IC, working with a script, there is an overview of the chapters of the script with the assigned answers.
One way to use the script is to navigate through the script.
It`s also a good Option to use a script as an rough Outline. In this case it would be a great advantage to jump direct to an answer via the Chapters.
Is it also possible to click on a chapter on the right side (CRM 2007 SP02) in the Overview an thereby navigate direct to the selected answer?
I assume yes, but in my script this doesn`t function properly.
Answer YES or NO is enough. (Up to now, I was not able to find a note.
Thanks and regards
Andreas
Hello
i am facing the same preoblem which u r facing under problem 2, is this fixed, if so can u plesae share the same......
Similar Messages
-
What is available on new Windows servers that allow you to write scripts that can work directly with Windows, SQL Server, and Exchange Server?
a. PowerShell
b. isql
c. osql
d. sqlcmdAll questions seem to be from the interview or a test. I think I even took this test once, it's KForce test.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles -
Interactive selection using photoshop script
How to make a script pause till the user makes a selection and continue again using photoshop script?
You can use two Scripts or one Script that, depending on some predetermined factor, performs two different tasks.
So you could for example write something into the metadata, a channel, a txt file, … when a Script is run and that information is absent, and if it isn’t have the Script perform something else and remove that again.
Edit: You probably could also set up the Script Events Manager to check for something on any Selection change and have it run a Script depending on that but I doubt that’s a good idea. -
Load dockable script from a script
I'm trying to build a script that will allow you to type in the name of a script instead of going through the window or script menu.Is there a way to load a dockable script through a script? Ideally this would have the same effect as if you had loaded the script vie teh windows menu ie. a dockable script would be dockable.
Ah I see what you're getting at.
No, I'm not exactly able to do that. It's a dumb workaround, but it still can only load scripts that are local to your computer.
Basically it's not "loading" the scripts from the script. All this script does is list the names of all of your scripts in your scriptUI folder as buttons (kind of like FT TOOLBAR but without icons, it's just the names on the buttons). When you click on a button, it doesn't directly launch the script. It performs app.executeCommand and searches for the script in your scriptui folder with a name that matches the button you clicked on. It's the same as clicking Window and launching a script that way, it's just a little easier. Since it's pulling it from the app.executeCommand, it'll load it as a dockable panel. If I told the script to just run the script in question, it would be a palette, not a dockable panel.
I WISH I could write a script that just loaded a bunch of scripts from a website, would make portable AE work so much easier. -
Call Photoshop script from Indesign script CS4 JS
Hi, I open Photoshop linked file from InDesign in Photoshop and I need same InDesign script to run Photoshop script on the file. How I can call the Photoshop script from InDesign script.
Thank you very much for your help.
YuliaThank you, Kasyan.
800 lines of script is little be intimidating.
What we are trying to achieve is to open jpgs in Photoshop and resave them as tiffs and replace same jpg with corresponding tiff in Indesign as it was placed before.
Is there a way to call Photoshop from Indesign through appleScript.
I have most of the script done for Indesign and I have Photoshop shript ready that saves jpgs as tiffs done. I am only missing the part where I can call this existing Ph. script from Indisign.
We prefer not to use BridgeTalk if possible, because we have a lot of programs open and running in the same time, and would like to avoid to open one more program (BridgeTalk).
Thank you very much for your great help.
Yulia -
As i am fresher Please share the doc of ECMA script using java script in SharePoint 2013 step by step also how we can insert,update,delete records in list using ECMA script.
Thanks and Regards, Rangnath MaliHi,
According to your post, my understanding is that you want to use JavaScript to work with SharePoint list.
To create list items, we can create a ListItemCreationInformation object, set its properties, and pass it as parameter to the addItem(parameters) function
of the List object.
To set list item properties, we can use a column indexer to make an assignment, and call the update() function so that changes will take effect when you callexecuteQueryAsync(succeededCallback,
failedCallback).
And to delete a list item, call the deleteObject() function on the object.
There is an MSDN article about the details steps of this topic, you can have a look at it.
How to: Create, Update, and Delete List Items Using JavaScript
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
End script error message: Script:chrome//wrc/content/overlay.js:1149
I get an unresponsive script error message asking me if I would like to end script now.
Script:chrome//wrc/content/overlay.js:1149
Firefox freezes and I have to end the program in task manager. Please help!The name "wrc" mentioned in the chrome URL is usually a hint to which extension is causing such an issue.<br />
You didn't list the extensions, so madperson wasn't able to give more precise instructions.
If it does work in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Save a script or copy a script with SQL Script editor
Hello,
I try to rename a script in the script repository I've loaded using the upload command.
I enter the new script name in the text field and save with the new name as the pdf doc explain (page 18-8).
It does not create any new script in the repository.
Also when i make a change and save it does not save the modification and the last modification date remains the upload date.
Can you help me ?
Thx.
Jean-PaulScott,
Thx for your help. I use Application Express 3.1.0.00.32 and the document I refer is Application Express User’s Guide Release 3.1 E10499-01 chapter 18 page 18-8 "Copying a script".
What I do is the following :
1) upload a file name pks_test with encoding scheme 'Western European ISO-8869-1' (to preserve accentuation characters used in the french language)
2) Edit it then modify it in the editor then save it.
3) The re-open it : the modification made at previous step has disapeared !
4) Change the name from pks_test to test_pks and the name is not changed.
Also the 'Last Updated' info is updated as if there were no change since the
script creation time.
If i do the same steps with the Hosted version of APEX (thx to Oracle) all work
fine.
There is a difference between the 2 environment :
my local (in France) display text in english (Home/Application Builder/SQL workshop ...)
the hosted (somewhere in the world) display text in french (Page d'accueil/Application Builder/SQL workshop ...)
Thx for the help -
How to run script file ( unix script file like ksh or sh file) using Java
How to run script file ( unix script file like ksh or sh file) using Java Program?.
I am using the following code snippet to run the simple commands like top or ls ,etc....
Runtime runtime = Runtime.getRuntime();
Process proc = runtime.exec("top");
Thanks In Adavance
-SivaString [] { "ksh" , "-c" , "script", "arg 1", "arg 2", "arg 3"}
-
To View Calc Scripts and Report scripts via MaxL or Esscmd
Hi all,
Can somebody tell how to read any calc script or report script in any database with the help of MaxL or Esscmd?
For example if there is any .csc or .rep file, I want to read the context of the file i.e. the script that is written in the file. Is it possible via MaxL or Esscmd?
Does Hyperion supports this functionality?
Regards,
JamesYou know that calc and report scripts are text files, right?
They are typically stored in the database directory, although that is not a requirement; they can be stored in other client-accessible directories and run from there.
I haven't done it in ages, but is also possible to pass calc and report scripts to Essbase via the API. I can't remember if the API will let you enumerate calc scripts from the database directory. I sort of strongly think yes. Someone who is more knowledgeable will either correct or refute that statement pretty soon. :)
If you want to list the objects (calcs or reports): http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/techref.htm
A few things that you can do with MaxL re calc scripts:
1) execute calculations, including a string that you pass through MaxL: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/maxl/ddl/statements/excalc.htm
2) delete calculations: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/maxl/ddl/statements/drpcalc.htm
3) list the calcs: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/maxl/ddl/statements/dispclc.htm
4) create the calc: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/maxl/ddl/statements/crecalc.htm
Report scripts are sort of a poor relation in MaxL (and were in Esscmd as well). You can basically only run a report as kind of export: http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/maxl/ddl/statements/exprt.htm
So, I think it's mostly there, especially the display object command. BTW, if MaxL can list it, the API can too -- how else does MaxL work?
Regards,
Cameron Lackpour
Edited by: CL on Dec 1, 2008 11:53 PM
Didn't post the right URLs. Now fixed. CL -
Initiating batch scripts from Maxl Script Editor in Admin Console??
Guys,
Is it possible to initiate batch scripts from Maxl script editor in Admin Console.
I dont want to automate the scripts as my data loading process can happen at any time.
Thanks in advance
AHi A,
I'm not sure what you're asking? Do you want to run a batch of Maxl scripts, or a batch file, or a single Maxl Script? Why do you choose to use the Admin console to do this? Could you run what you're trying to run in batch from the command line?
Executing MaxL and MDX Scripts
To execute a MaxL script or an MDX script:
Open or create the script.
From the server drop-down list on the toolbar, select the Analytic Server to execute the script against.
The drop-down list contains only Analytic Servers that are displayed in your Enterprise View. For more information about connections, see Connecting to Analytic Servers in MaxL and MDX Script Editors.
Specify how errors should be handled during execution. See Setting MaxL and MDX Execution Options.
Specify how you want results to be displayed in the Results tab. See Viewing MaxL and MDX Results.
If the script contains variables, specify how undefined variables are resolved during execution. See Resolving Undefined Variables.
To execute the entire script, right-click and select Execute from the pop-up menu.
To execute only part of the script, highlight the statement or statements that you want to execute, right-click, and select Execute from the pop-up menu.
The script executes against the specified Analytic Server, and the results are displayed in the Results panel.Regards,
Robb Salzmann -
I'm trying to restore bookmarks from a .json file (as xmarks keeps duplicating and corrupting my list) and Firefox often works really slowly also. I know this as I ususally get a script message errors and option to continue or stop.. In this case with restoring bookmarks everytime I try to restore with my saved .json file I get an interruption, and the message " A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. script: resource://gre/modules/PlacesUtils.jsm:1436" i stop the script (if i continue the same warning comes up) and then get half of my bookmarks restored or similar only if that, and another message telling me FF is unable to process the bookmarks!? I think this unresponsive script is the one that randomly comes up when I'm working FF hard, and causes it to run slowly- or it is a very similar looking message. Any comments and ideas appreciated .
Running on Macbook pro 2GHz Intel Core 2Duo, 2Gb 667 Mhz DDR2 OS 10.6.8One other thing....the same script error on Ubuntu Linux 11.10 on my old Dell. And it seems that the backup I thought I had made probably was saved incorrectly, again only half of the bookmarks I had sorted out were created in the file- i should have exported a copy as another safeguard!
-
Inter-script communication and script cloning
How does a calling script pass information about itself to a script it calls via a tell statement? I'd want to pass the name and path of the calling script's application file, among other things. The called script would then talk back to the calling script, and so forth. Must this be done explicitly by, say, having the called script invoke a script object in the calling script, or can information about the calling script be passed by the call itself?
Also, how would one get a script application to clone a copy of itself? Would having the Finder just make a copy of the application file from within the script itself work?
Thanks for any insights.I saved the following as an application and ran it as an application (outside the Script Editor!) and it 'cloned' itself as expected.
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "Finder" to duplicate (path to me)</pre>Another interesting feature of script objects, however, is that you don't need to duplicate scripts with the Finder to get multiple script objects. The preferred method is to load the same script into multiple variables of the calling script, and then assign different properties to each new instance of the called script.
You can even do this with scripts that you define within the calling script itself, or with particular handlers or scripts defined in other files. I've rarely needed to go that far in my own scripting adventures, but I've done it before. More frequently I just use the much simpler run script command to pass parameters and return results from a called script file. See this thread for info on that:
http://discussions.apple.com/message.jspa?messageID=1163768 -
Failed to load script class for script ...
We are trying to run a script in Thin Client mode, recorded in Oracle Functional Testing,
But get: "Failed to load script class for script ...".
Anyone has any tips for what we should check to solve this problem?Hi,
There was no option for "java client", and it was set to "thin client" by default.
Anyway, changing the setting back and forth between "thick client" and "thin client" solved the problem.
Thanks. -
Its possible to convert Apple script to Java script
Hi,
Please Help me anyone to do that script.
its possible to convert below mentioned Apple script to Java Script.
Thanks in advance.
Help me......!
-yajiv
Code:
tell me to addImageLabels()
on addImageLabels()
tell application "Adobe InDesign CS5"
set numberAdded to 0
activate
set enable redraw of script preferences to true
set currentFonts to (get name of every font)
if currentFonts does not contain fontname then
display dialog "The font \"" & fontname & "\" is not active on your system." buttons {"Continue anyway", "Cancel"} default button 2
end if
tell document 1
-- get a list of unique page IDs in this document
set allpageids to my getPageIds()
repeat with p from 1 to (length of allpageids)
set pgid to item p of allpageids
-- loop through these, getting a list of unique page item IDs to inspect
tell page id pgid
set pageitems to (get id of every page item)
repeat with i from 1 to (length of pageitems)
set pid to item i of pageitems
tell page item id pid
try
-- certain boxes will fail to yield a content type, whatever
if content type is graphic type then
set c to class
set i to id
-- get the name of the link, i.e. the filename, subject to labelFormat (full name, first six chars, etc.)
set gn to my getImageName(pgid, c, i)
if (gn is not "Empty") and (gn is not "") then
set b to visible bounds
set h to (item 3 of b) - (item 1 of b)
set newtop to (item 1 of b) + (h / 2)
set item 1 of b to newtop
set w to (item 4 of b) - (item 2 of b)
if w < minwidth then
set item 4 of b to ((item 4 of b) + 0.2)
set item 2 of b to ((item 2 of b) - 0.2)
end if
set l to (make new text frame at beginning of page id pgid with properties {visible bounds:b, fill color:fillcolor, contents:gn, label:"imagelabel"})
tell l
tell paragraph 1
set justification to center align
try
set applied font to fontname
end try
set point size to fontsize
set fill color to textcolor
end tell
set inset spacing of text frame preferences to ((insetspacing as string) & " in") as string
fit given frame to content
set numberAdded to numberAdded + 1
end tell
end if
end if
end try
end tell
end repeat
end tell
end repeat -- allpageids
end tell -- document 1
display dialog "Added " & numberAdded & " labels." buttons {okButton} default button 1 giving up after 10 with title scriptName
end tell -- InDesign
end addImageLabels
on getPageIds()
tell application "Adobe InDesign CS5"
tell document 1
tell master spread 1
set masterpageids to (get id of every page)
end tell
set docpageids to (get id of every page)
end tell
end tell
return masterpageids & docpageids
end getPageIds
on getImageName(int1, cla1, int2)
tell application "Adobe InDesign CS5"
tell document 1
tell page id int1
if cla1 is rectangle then
set imagename to (name of item link of graphic 1 of rectangle id int2)
else if cla1 is polygon then
set imagename to (name of item link of graphic 1 of polygon id int2)
else
return "Unknown"
end if
try
if (labelformat is "First six characters") then
return (characters 1 thru 6 of imagename) as string
else if (labelformat is "Base name of linked file") then
set op to offset of "." in imagename
return (characters 1 thru (op - 1)) of imagename as string
else
return imagename
end if
on error
return "Empty"
end try
end tell
end tell
end tell
end getImageNameYajiv:
I realize English is probably not your first language, but you are not really making sense. Perhaps you could use more words and write in more detail.
It seems you already have your script in AppleScript. Why do you need to convert it to JavaScript?
It's going to be inconvenient at best and probably not worth anyone's time.
Just use the AppleScript.
Maybe you are looking for
-
How to make a Homescreen Shortcut to a specific File Folder ?
I used to be able to do this using Astro File Manager on my DX but now can't see a way to do this on the Razr Maxx. I have a file folder on my SD card that contains a bunch of data files. I'd like to have a Shortcut to that on my screen for quick acc
-
Premiere pro CC2014 crashes on new imac with AMD Radeon R9 M295X
Premiere Pro CC2014 starting up crashes with error "Premiere Pro could not find any capable video play modules" We use new iMac with OS X 10.10.1 and graphic card AMD Radeon R9 M295X 4096MB which is working faultlessly with all Adobe programs includi
-
ALV Tree event registration doesn't work
Hello Experts, the following is the registration-form which shall register a item-double-click event to my alv-tree-object. when doing the double-click it doesn't open my own methods in the event-handler class but the standard ones and nothing happen
-
Error in PKGBUILD - please educate me
Hello, I'm trying to install a Package from AUR, but it seems that the PKGBUILD contains an error or at least something that is an error now. As the package is quite old and I want to understand AUR, I would like to fix that myself (with help from th
-
Nikon P7000 and Aperture with latest RAW support
Hi, Does anybody have the same issues with RAW files from the Nikon P7000 in Aperture with the latest RAW support update? Aperture is showing the wrong ISO and not the 35mm zoom length. It's showing always 6400 ISO. Regards, JO