Overview through all Components for ContentServer?

Is there any address or thread where i can get an overview through all packages for the contentserver?
Perhaps also some short description?
Would be nice if someone can help.

Wow. Tall order but a good idea. The documentation library is a good place to start but it will take you some time to review/read all that information. Is there something specific you were wondering about or did you want something akin to a deck with one slide per add/on?
Documentation library is here:
http://download-west.oracle.com/docs/cd/E10316_01/ouc.htm

Similar Messages

SGEN through all components does not help preventing compiling

Hello
We run SGEN through all components after applying basis support packages.
However the system is still compiling. What could be the reason? Did anyone encounter tha same problem? How to solve this?

Hi Tina,
if you haven't done yet please have alook at SAP Note 481548.
Hope this helps.
Regards
Bernd

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

How can I select a smaller font for all components of a Swing application?

The default size of font in Java Look and Feel is 12, how can I change it to 10 globally for my Swing application ?
Thanks for your help.
Helen

It is not very simple because all components don't use the same fonts and if you don't want to subclass the l&f you can do this :
after setting the l&f (in the main for example)
Font f = new Font("dialog", Font.PLAIN, 11);
UIManager.put("MenuItem.font", f);
UIManager.put("Menu.font", f);
UIManager.put("MenuItem.acceleratorFont", new Font("dialog", Font.PLAIN, 10));
UIManager.put("Label.font", f);
UIManager.put("Button.font", f);
UIManager.put("ToggleButton.font", f);
UIManager.put("ToolTip.font", f);
UIManager.put("List.font", f);
UIManager.put("Table.font", f);
UIManager.put("TextField.font", f);
UIManager.put("ComboBox.font", f);
UIManager.put("RadioButton.font", f);
UIManager.put("CheckBox.font", f);
UIManager.put("RadioButtonMenuItem.font", f);
UIManager.put("CheckBoxMenuItem.font", f);
UIManager.put("TableHeader.font", f);
UIManager.put("Spinner.font", f);
UIManager.put("Panel.font", f);etc...
Denis

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it a

Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it actually says not moblie network available, when everyone else in my family has coverage and are on my plan with iphones. I am missing text messages and dropping calls left and right. This is unacceptable for the cost of this phone and my service. I have did a hard reset etc. What else can I do??

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

I have LR from 2 through 4.4, I am simply trying to adjust CR2s, and convert the them JPEG. LR says my Perfectly Clear is expired but my update is up to date and all paid for. What is Perfectly Clear and how do i get this puppy to be part of the team?

i have LR from 2 through 4.4, I am simply trying to adjust CR2s, and convert the them JPEG. LR says my Perfectly Clear is expired but my update is up to date and all paid for. What is Perfectly Clear and how do i get this puppy to be part of the team?

Perfectly Clear is a 3rd party commercial plugin for Lightroom.
http://www.athentech.com/products/plugins/
Have you ever installed it as a trial in the past?

Reporting Services through ISA server for All Authenticated Users

Hello colleagues.
I have MS SQL 2012 server with Reporting Services and it work via link:
https://reports2.domain.com/reports
In LAN all work fine, but I want publish this resource via ISA for All Authenticated Users.
When in publish rule I configure (in Condition) "All users" - all work fine, but when I configure "All Authenticated Users" - I have trouble on web form on
https://reports2.domain.com/reports/Pages/Report.aspx?ItemPat... - scripts not work, because it run how "anonymous" (I see on ISA logging) and ISA block scripts.
I can't use "All Users", because it's not secure.
Maybe somebody publish Reporting Services through ISA server for All Authenticated Users?
OR maybe - how on Reporting Services configure Negotiate authenticated for scripts?

Hi Alexander,
All users or applications who request access to report server content or operations must be authenticated using the authentication type configured on the report server before access is allowed. The AuthenticationType named RSWindowsNegotiate is supported
by Reporting Services. To configure Windows Authentication on the Report Server, please see:
http://msdn.microsoft.com/en-us/library/cc281253(v=sql.110).aspx
Besides, we can publish report server via ISA server. Please note that you should use a new web port number with a new listener which shouldn’t be used by other web site for report server. Reference:
http://social.technet.microsoft.com/Forums/forefront/en-US/1cc68996-1ce6-4d88-a30d-2bfd13fba06e/how-to-publish-ssrs-2008-through-isa-2006?forum=Forefrontedgegeneral
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Katherine thanks for answer.
Report Server service started as Domain account.
I have in RSReportServer.config this:
<Authentication>
<AuthenticationTypes>
<RSWindowsNegotiate />
</AuthenticationTypes>
<RSWindowsExtendedProtectionLevel>Allow</RSWindowsExtendedProtectionLevel>
<RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
<EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
In web.config I have this:
<authentication mode="Windows" />
<identity impersonate="true" />
I can go (from Internet through ISA) to
https://reports2.domain.com/reports and LogOn Authentication is work, but scripts not work, because it run how "anonymous" (I see this on ISA logging) and ISA block scripts.
Do you know where in Reporting Services configure run scripts with Negotiate authentication?

Walk through all files in a folder and do this for all subfolders and...

... and their subfolders, etc. I mean I want to recursively walk through all subfolders of a folder and when I'm "in" in each folder I would like to walk through all files alphabetically of that folder.
While iterating through the files (of a certain type: .mp3, .mp4, .m4a) of that folder, I need to make a simple counter. e.g. when counter is 3 it means we are on the 3rd file alphabetically of the folder.
Then I simply want to set the track # mp3 tag of that file to this counter value (e.g. 3)
Anyone know how to do this? or at least to be able to show me the walking the folders and iterating the files bit? I'm brand new to applescript.
Why do I want to do this? Well I have a lot of live music shows, each in its own folder, but in my apple devices and itunes when I play a show it will not show the songs in the correct order. The file names are alphabetical in the correct order though and I suspect if I assign track #s then itunes, ipods and iphones will be able to play the "album" back in the order listed by track #??

What are you using to play your items? iTunes can use various properties to sort a playlist, independent of what the file name is (Finder too, for that matter). If you are just wanting to add a prefix number to a file name, you would also probably need to use leading zeros to keep it in order when sorted by name.
The following is a general purpose handler to go through the items in a folder - I just put various text into the output list as an example.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFEE80;
overflow: auto;"
title="this text can be pasted into the Script Editor">
on run -- example
set TheFolders to (choose folder with multiple selections allowed)
choose from list (ProcessStuff from TheFolders)
end run
to ProcessStuff from SomeItems
process items contained in SomeItems, recursively descending the directory tree
parameters - SomeItems [list]: the items to process
returns [list]: a list of processed items
set FilesList to {} -- this will be a list of processed items
repeat with AnItem in SomeItems
set AnItem to AnItem as text -- get the contents
set FileInfo to (info for AnItem as alias) -- see Standard Additions
if (folder of FileInfo) and not (package folder of FileInfo) then -- a folder (not a package)
-- do something with the folder, if desired
set the end of FilesList to "folder " & AnItem
try -- sort and process contents, skipping any errors
tell application "Finder"
set SubItems to (get items of folder AnItem)
set SubItems to (sort SubItems by name) as alias list
end tell
set FilesList to FilesList & (ProcessStuff from SubItems)
end try
else -- a file
-- do something with the file, if desired
set the end of FilesList to tab & (name of FileInfo)
end if
end repeat
return FilesList
end ProcessStuff
</pre>

Change BgColors, FgColors for all Components in a Container?

Is there a possibility to change the Background Color, the Foreground Color and the Fontsettings for all Components in a Container? Each Component in the Container should get the Colorsettings of the Container...

Just overwrite the add, setBackground(), setForeGround() and the Font-methods of the Container:
public void add(Component c){
super.add(comp);
comp.setBackground(...);
comp.setForeground(...);
//...the Font-stuff
public void setBackground(Color c){
for(int i=0;i< getComponentCount(), ++i){
getComponenetAt(i).setBackground(c);
//the same for setForeground and the Font-methods.

Transaction for overview of all custom (Z) programs in ERP.

Dear gurus,
I am looking for a transaction/report which gives me an overview of all custom programs/elements build in a system. I used to know this transaction but I cannot find it anymore (searched throughout Google and SDN ).
Can anyone help me out?
Thanks in advance!
Rob
PS the overview is needed to show a customer an overview of all used Z-elements in their system (and I do not want to use TADIR or SE93 ).

Hi Sandra,
Unfortunately this is not the one. It was a transaction which provided me some input options and which I then could run and which gave me an overview on all Z-elements in the system. A fantastic report! I hope someone can help me out with this report/trx.
Thanks!
Rob

Fetching all text components for query - RSRREPDIR / RSZELTXREF / RSZELTTXT

Hi all,
I am developing a tool to fetch all the text components for a BI query. The texts are then to be translated and uploaded back to the BI system, but right now we are first focusing on downloading the texts.
In the tool, the user inputs the query technical name on the screen, after which my approach is as follows:
1) Fetch Query UID from table RSRREPDIR using Query technical name.
2) Fetch all element UIDs from table RSZELTXREF using Query UID and by resolving the hierarchies. Agreed, the hierarchies in the table RSZELTXREF are very complex.
3) Provide all element UIDs, including root query UID, to the table RSZELTTXT, and fetch TXTSH and TXTLG texts.
Now, my question is at step 2: Which are the UIDs that I should fetch? Specifically, should I fetch only those UIDs which have Layout Type as 'ROW' / 'COL' / 'SHT', or should I fetch all UIDs regardless of Layout Type?
Secondly, my understanding is that because of the table hierarchy, I should continuously feed the field TELTUID back to SELTUID until the Layout Type is 'NIL'. When this happens, I am at the Element Level. Is this correct?
Thanks in advance,
Shailesh.

Now in the following code, why are u creating a new form?
Why dont you use the form which is input to the Action Class's execute methof?
if(rs.next()){
EditForm e=new EditForm();
e.setEmpname(rs.getString(1));
}Thanks and regards,
Pazhanikanthan. P

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

Purch. Req. for all components in PM Order

We have some Maintenance order (IW31) that follows this behavior.
1. For the plant "AAAA", for EACH component in the order the system generates ONE Purchase Requeriment, it means, 5 componentes = 5 Purchase Requeriments.
2. For the plant "BBBB", for all components in the order the system generates ONLY one purchase requeriment, it means, 5 components = 1 Purchase Requeriment.
What does generate this different behavior? How (and where) can I configure that always all the orders follow the 2nd behavior? Is it part of PM or PU configuration?

Dear,
Go to SPRO -> Plant Maintenance and Customer Service -> Maintenance and Service Processing -> Maintenance and Service Orders -> Functions and Settings for Order Types -> Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
T CODE OIOE
Here is setting for One collective purchase requisition per order and Plant.
Regards,
R.Brahmankar

Installed cs6 master collection wont install all the components for photoshop , after effects or FB yet everything else is fine

installed cs6 master collection wont install all the components for photoshop , after effects or FB yet everything else is fine

Alanh61734259 are you receiving any specific error messages in the installation log files? You can find details on how to locate and interpret the installation log files at Troubleshoot with install logs | CS5, CS5.5, CS6, CC. You are welcome to post any specific errors you discover to this discussion.

Overview through all Components for ContentServer?

Similar Messages

Maybe you are looking for