Overview Variables Business Content 7.0 ?

Hello,
I would like to know does anybody have an overview about all the variables of BI Content 7.0.
I would need an overview with the name and a short description what the variable comprise.
Thank you very much in advance.
Best regards
Michael Wecker

Hi Michael,
Go to Table V_VAR_JOIN and select DEFTP = "VAR", Select all COMPUID from this table and put in the selection of table "RSZELTTXT" Field ELTUID and you will get all teh variables available in the system with text. From text you can identify for which purpose variable can be used.
Regards,
Kams

Similar Messages

  • How to Install Business Content BEX Variables.

    Hi Experts.
    i want to install all the standard bex variables
    (exits, formulas) available in business content.
    when i go to the business content i see lot of variables
    of 0CALDAY which one to install ?. and even after installation of all none of them seem to appear in the BEX query designer?.
    Is there anything am missing?
    Thanks,
    Hari Anand.

    Hi,
    A little correction to Aby's reply.
    You don't have to have something like Billing date mapped to 0CALDAY in transfer rules.
    It's enough to have just 0CALDAY.
    The other dates (if you need them), like billing date, receiving date etc. are created as A REFERENCE TO 0CALDAY.
    It means that to all derivative dates you may apply variables created on 0CALDAY.
    You may not see all variables installed from a business content. -- Some variables are created on a particular infoobject and you can see those variables in the left panel, beneath this infoobject.
    There are also text and formula variable that might be independent from infoobjects. You can see them while creating a formulas in structures.
    Best regards,
    Eugene

  • Regarding Business content  variable

    hello
    i have installed business content variable.i need to use the variable in the existing report. i need to trasport the variable ........? can any one help me what are the steps involved in transporting varabile.
    Thanks
    Rad

    Hi rad,
    You can collect the variable in a transport request from RSA1 > Transport connection. In the Object types list, look for query elements and under query elements you will find Variables. Move this to the right hand side and assign the development class as reqd. This will prompt you for a transport request that you can later release and import into your target system.
    Hope this helps...

  • SRM Business Content

    Hi All,
    I would like to know the infosource of 0SR_C01 procurement overview(aggregated) cube. while on help.sap it shows 0SR_MC01 as a multiprovider for 0SR_C01. But could not find the infosource for the same.
    I would also like to know if anyone has the list of content infocubes and their infosources for SRM. Please share it with me.
    Thank in Advance
    Niren

    Hi ,
    for all business content, you can start here
    http://help.sap.com/saphelp_nw04s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
    scm
    http://help.sap.com/saphelp_nw04s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
    and bi best practice
    http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
    Check this link for SRM Business Content information: http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
    DataSources
    New DataSources have been created for NW 2004s BI Content Add-On 2 and SRM 5.0. These are described here, along with their extraction logic.
    The following graphic shows the data flow from the DataSources to the DataStore objects
    Structure
    Each DataSource has an extraction structure and a data extractor. Generally, this is an RFC-capable function module.
    There are two types of extraction: Specific extraction and generic extraction:
    Specific extraction is strongly oriented towards the data model of the BI System and the necessary extract structure. It executes DataSource-specific processing steps.
    The logic contained within the generic extraction is implemented centrally and can therefore be reused by the specific extraction modules. The generic extraction deals with access to the SRM database and is similar for each DataSource.
    Generic and specific extraction
    Extraction logic in detail
    Data extraction involves the following six function modules:
    InitLoad
    InitLoad is called as soon as an initial upload is started in the BI System. In other words, it is executed when data is loaded into the BI System for the first time. The module can restrict the data extraction according to filter criteria that were defined in BI during extraction (for example, extract the data for a particular timeframe). InitLoad packages the data before it is transferred to the BI System.
    DeltaLoad
    DeltaLoad is called when a document is modified in the SRM System. The module writes data that has accumulated since the initial loading to a delta queue.
    Data Collector
    The Collector reads the required data from the database in the source system. For performance reasons, the data is then buffered in system-internal tables. The tables have the same structure as in the database. This saves time and effort, because data conversion is kept to a minimum.
    Data Consolidator
    The Consolidator groups data that belongs together from a business point of view. The consolidated data is stored in internal tables and is prepared for further processing.
    Data Normalizer
    The Denormalizer prepares the source data for the BI System. It calculates key figures that are required for the report but are not contained on the database and converts data types in the source system to data types of the BI System. Depending on the BI data model, the system now decides how each row is filled with data.
    Data Mapper
    During mapping of the data, the system defines which fields of the denormalized data structure are assigned to the fields of the extract structure. In this way, flat and one-dimensional lines are generated from the data.
    The following table shows the technical names of the function modules of the individual DataSources:
    Description
    0SRM_TD_PO
    0SRM_TD_CF
    0SRM_TD_IV
    0SRM_TD_PO_ACC
    InitLoad
    BBP_BI_PO_EXTRACT
    BBP_BI_CF_EXTRACT
    BBP_BI_IV_EXTRACT
    BBP_BI_PO_ACC_EXTRACT
    Collector
    BBP_BI_GEX_COLLECT
    BBP_BI_GEX_COLLECT
    BBP_BI_GEX_COLLECT
    BBP_BI_GEX_COLLECT
    Consolidator
    BBP_BI_GEX_CONSOLIDATE
    BBP_BI_GEX_CONSOLIDATE
    BBP_BI_GEX_CONSOLIDATE
    BBP_BI_GEX_CONSOLIDATE
    Denormalizer
    BBP_BI_GEX_DENORMALIZE
    BBP_BI_GEX_DENORMALIZE
    BBP_BI_GEX_DENORMALIZE
    BBP_BI_GEX_DENORMALIZE
    Mapper
    BBP_BI_PO_MAP
    BBP_BI_CF_MAP
    BBP_BI_IV_MAP
    BBP_BI_PO_ACC_MAP
    DeltaLoad
    BBP_BI_DELTA_UPDATE
    BBP_BI_DELTA_UPDATE
    BBP_BI_DELTA_UPDATE
    BBP_BI_DELTA_UPDATE
    Hope this helps,
    Regards
    CSM Reddy

  • Error while activating the Business Content

    Hi BI gurus,
    I am installing the business content for the sales overview infocube with the grouping option data flow before and install in back ground option. The back ground job is cancelled with the error msg"STDO: Log could not be written on output device T" and at the end it shows ABAP/4 processor: LOAD_PROGRAM_LOST error.
    Can any one give solution for this. This is very urgent,
    With Regards,
    Balachander.S

    And also check whether there are any dumps in ST22.
    Khaja

  • Error while activating process chains from Business Content

    Hi All,
    I am trying to activate the SAP Business Content Process Chains, which load data to 0PM_DSO2 in Plant Maintenance Area -
    1.Delta Upload : MTTR / MTBR   (0PM_DELTA_P02)
    2.Initialisation  :   MTTR / MTBR  (0PM_INIT_P01 )
    And they are failing with the error
    "Object  0PAK_BZJNGI4SYTTJM5DXY8IPMHB0C could not be found in version
    Message no. RS_EXCEPTION280"
    "Message Text
    Object  0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0 could not be found in version
    Technical Data
    Message type__________ E (Error)
    Message class_________ RS_EXCEPTION (Exception Messages)
    Message number________ 280
    Message variable 1____ 
    Message variable 2____ 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0
    Message variable 3____ 
    Message variable 4____  "
    In the collected objects, these two infopacks are not present also.
    Can you please let me know how to proceed?
    Many Thanks in Advance,
    Vineeth

    Hi
    Make sure these 2LIS_17_I0NOTIF and 2LIS_18_I0NOTIF datasources are being installed.
    Check these links.
    http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
    Chandu.
    Edited by: Chandu on Jan 22, 2009 2:24 PM

  • Problem with Business Content install in ECC5 IDES

    Hi,
    I am having tough time installing business content.
    After installing ECC5 IDES, I am trying to install Business Content in BW ( Client 800). 
    In SBIW, (under Business Content DataSources), I did Transfer Application Component Hierarchy.
    Then I transfered few DataSiurces ( 0MATERIAL_ATTR)
    Then in BW, I did "Replicate Data Sources". I see all the Datasources in "Data Source Overview"
    But When I try to install Business Conetent ( rsa1>> Business Content >> Select Object Types >> InfoObjects>> Select Objects>> Double click ), I couldn't find any InfoObjects from source system. I tried the same for InfoCubes as well..
    Am I missing anything?? I appreciate your help.
    Thanks
    Samba

    ECC will have content for 'source system' ie datasource and extractors. On your BW system you need to have the business content add on available before you can see such objects there (infoobjects, cubes).
    BW system (whether in the same IDES or another system) needs to have this BW Content add-on. It is one additional step, just having the BW system (without this addon) will not give you what you are looking for.
    BW content add-on is typically one set of transport files, installed using SAINT transaction. My guess is your system doesn't have it.

  • How to install the Business Content Cube 0PP_C02

    Hello,
      Can you please explain me how to install the Business Content Cube 0PP_C02 .
    What are the nesessary steps involved in this process. How this Standard Cube is available in
    AWB -> Modeling.
    What are the nesessary steps involved in the R/3 side.
    CAn you please help me in this.
    Thanks alot.
    Regards,
    Anitha

    Hi anitha
    TRy this
    To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
    The following figure displays the DataSources in an overview according to the application component.
           2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
    The DataSources lying under the subtree and other subtrees are selected.
           3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
    DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
           4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
           5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
    If an error occurs, the error log appears.
    Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
           6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
    and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
    this will solve ur issue..
    Prasanna

  • Documentation for Business Content Rapid Marts Reports for SAP R/3

    Hi,
    As we have technical documentation for SAP BI business content BI reports on SAP HELP Portal,
    is there any link where we can find the technical documentation for business content reports supported by SAP BOBJ Rapid marts for R/3 solution like for HR module.
    I would like to know what kind of reports are available as a part of rapid mart business content and what are the measures ( key figures ), dimensions ( characteristics ) supported by each of these standard business content rapid mart reports.
    I have referred business guide and user guide for HR rapid marts but they just give an overview of what analysis can be done.But there is no technical documentation for each of the possible rapid mart reports.
    Thanks,
    Tarun Brijwani.
    Edited by: Tarun Brijwani on Feb 10, 2011 4:00 PM

    Tarun,
    Please share if you got some help on your post.

  • Business Content extractors'   "other fields"  -  How do I get them?

    Hi everyone.
    I have installed <b>0CO_OM_OPA_6</b> from Business Content, however there are 6 fields that don't appear. If you right-click on 0CO_OM_OPA_6 in DataSource Overview (RSA1-->SourceSystems) and choose "Object Overview", a window pops up with all the contents listed and grouped as Characteristics, Key Figures, Time Characteristics and Units, and at the end there is a section called "Other Fields" which contains the object I want, AUTYP (Order Category).
    Does anyone know how to get this? It did not appear when I activated the business content, and it is not available in Transfer Rules or Communication Structure.
    Thank you!

    hi,
    sorry... just check in system...
    yes field AUTYP isn't appear in transfer structure,
    checking r/3 side, transaction rsa6, the field AUTYP is a selection, but going detail to table ROOSFIELD (se16), AUTYP has value '1' for field SELECTION, using F1, it's explained
    '1': Pure selection field for the DataSource. The customer can change the selection, but not the visibility
    it should mean it's not visible, which differ from AUFNR which has value 'X' (selectable and visible).
    there also written
    'A field that is not visible (or that is hidden) cannot be transferred into the transfer structure.'
    we can update the value ROOSFIELD-SELECTION for AUTYP with abap program but don't know it will work or not.

  • Inventory Management (0IC_C03) Business Content queries

    I have the following queries which are delivered when I activate 0IC_C03.  The queries below have also been activated as part of the model.
    Is there any additional queries which should/can be activated against this InfoProvider and of the list below are any redundant? Thanks
    Blocked Stock
    Consignment Stock at Customer
    Inventory Turnover
    Quantities of Valuated Project Stock (as of 3.1 Content)
    Quantities of Valuated Sales Order Stock (as of 2.1 Cont.)
    Receipt and Issue Customer Consignment Stock
    Receipt and Issue of Blocked Stock
    Receipt and Issue Quality Inspection Stock
    Receipt and Issue Stock in Transit
    Receipt and Issue Vendor Consignment Stock
    Scrap
    Stock in Quality Inspection
    Stock in Transit
    Stock Overview
    Stock Overview (as of 3.1 Content)
    Stock Range of Coverage
    Valuated Stock
    Valuated Stock (as of 3.1 Content)
    Vendor Consignment Stock

    hi Niten,
    by choosing that 0IC_C03 and using grouping 'in dataflow afterward' in business content activation, you should get all the queries.
    you can cross check in rsa1->metadata repository->local object (business content).
    in sap help
    http://help.sap.com/saphelp_nw2004s/helpdata/en/77/65073c52619459e10000000a114084/frameset.htm
    (expand left node)
    hope this helps.

  • Short Dump during Business Content Installation

    Hi Gurus,
           I'm working on SAP BI 7.0.  I'm getting a Short Dump Error stating " Program error: ASSIGN with length 0 in program "SAPLSNR3".  " while I'm try to install the Business Content.
          I'm getting this error when I'm trying to install Business Content with Grouping Option " Data flow Before ", but I didn't face any problem when I started off with the Grouping Option " Only Necessary Objects ".
         I tried analysing this problem by going to ST22 transaction & during my analysis I found that in the said program " SAPLSNR3 ", there's LSNR3F01 include in which line number 178 is having a ASSIGN statement, where its trying to assign a computed value to some data variable. Now i understand that there's some problem with the value getting computed in the ASSIGN statement.
         I also tried finding some SAP Notes for the same problem, but to my misery I couldn't find anything appropriate. Could anyone of you who had faced similar problem  help me out.
         For further assistance in making your replies much easier here in I'm adding the information about BI 7.0 system components.
               SAP ABAP:               Level 12
               SAP BASIS:               Level 12
               SAP BW:                   Level 14
               Business Content:       Level 5
    Waiting for a early solution from U guyz.........
    Regards,
    Syed Shujaath Ali.

    Hi,
    Apply SAP BW: Level 19 or 20
    Business Content: 10  
    patches .

  • FI Business Content Infocubes

    Hi,
    I want to know which Infocubes in Business content are used for FI, CO, MM and SD typically in companies. I cannot get this realtime info from documentation..Please help.
    Thanks,
    Lalita
    Message was edited by: Lalita S

    these are the important cubes available in business content for sd and mm. depends on the requirement of the company they will use the cubes
    http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
    SD
    http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
    InfoCubes
    Quotations / Orders (technical name OSD_C05)
    Service Level - Order Quantities (technical name: 0SD_C11)
    Service Level: Order Items (technical name: 0SD_C12)
    Service Level: Orders (technical name: 0SD_C13)
    Backorders (technical name: 0SD_C14)
    Sales Overview (technical name: 0SD_C03)
    MM-Purchasing
    http://help.sap.com/bp_biv335/BI_EN/html/BW/PurchAnal.htm
    InfoCubes
    Purchasing Data (technical name: 0PUR _C01)
    Vendor Evaluation (technical name: 0PUR_C02)
    Purchasing Groups (technical name: 0PUR_C04)

  • Business content implementation timeline

    Hello folks,
    Trying to get an idea of timeline to plan for implementing standard business content for the new G/L functionality and Asset accounting. Assume a brand new SAP BI install EHP3 and no customization. Will appreciate any guidelines to consider for this.
    Thanks!

    No customization?  Standard guidance is that business content only gets you 10-20% of the way....
    Also still many variables...performance optimization...for instance do you use FI_GL_10 or FI_GL_12...same content but different method of delta extraction and big concern depending on requirements....Also do you plan to convert business content to follow current best practice?  LSA/EDW approach?  Or leave it in 3.x format?  Queries?  Implementation of MultiProviders?  Time to design security roles and validate?  Bex web or simply analyzer?  Are you wanting to know end to end time for no customization and integration testing with users, and time to go-live?  Or just straight content activation time in development only? 
    The straight up content activation time with no customization, testing, etc. is the smallest part of the project, but is still significant depending on which InfoProviders you choose, etc. 
    You can stand it up in a couple of weeks...but you'll spend months making it useful.

  • Business Content, CCA - Incomplete Activation

    Activated Cost Center Accounting Business Content of BW 3.3 without errors.
    However, some objects are not available - in particular, 0COSTELMNT.
    From RSA1 / Workbench, InfoObjects tab in Modeling, search does not find 0COSTELMNT.
    However, RSA1 / Workbench, Source Systems tab in Modeling, after requesting Object OverView - 0COSTELMNT is reflected as activated.  Also, from RSA1 / Workbench, InfoSources tab in Modeling for 0CO_OM_CCA_1, 0COSTELMNT is reflected in Transfer and Communication Structures.  Furthermore, 0COSTELMNT can be drilled down into / opened for review.
    Failure of 0COSTELMNT to completely activate prevents activation of other objects, including CCA_1 InfoCube.
    Have attempted to re-activate total CCA Business Content in both foreground and background, without success.
    Have attempted to re-activate 0COSTELMNT in both foreground and background without success.
    Have attempted to force re-activation by specifically selecting Install option in Business Content - overriding Match status reflected, again without success.
    Has anybody else encountered this or a similar problem ?
    Any ideas how to achieve complete activation of InfoObject 0COSTELMNT, as well as related objects ?
    THANKS.

    Hi Lyle,
    You are thanking a poster for his answer.
    Please next time also give him points.
    See: /people/mark.finnern/blog/2004/08/10/spread-the-love
    This time I did it for you.
    Remember: When you ask a question you also assume the responsibility to assign points.
    Please check your other questions and if the answers were good.
    Spread the love and give some points.
    Thanks in advance, Mark.

Maybe you are looking for