Overview, which Jobs are scheduled and which haven't finished successfully
We are using GridControl jobs to administrate several databases (e.g. execute exports, analyze schemas, etc.). All of these jobs are scheduled...
The "Home" tab of the GridControl GUI has the information "All target jobs" with "Problem executions" and "Suspended executions" - but what we would
like to have is a view, which contains the job-names and their status.
I've looked through the data-dictionary of the GridControl repository and found several tables and views which contain all kind of informations about the
jobs.
Does anybody already know, how to setup a view with the needed informations?
We can't use the tab "Job activity" since the result of the view should be mailed to the developers...
Any help will be appreciated...
Rgds
JH
we are rather new to GridControl and not very experienced with the reports. I thought that just the already defined report-categories could be used.
I went through the reports but couldn't find any report which is related to jobs.
But thansks for your suggestion - we will try to create a report...
Similar Messages
-
How do you determine which apps are paid and which are free
I am trying to perform some cleaning of my iPhone and want to delete some apps. I know which ones to delete, and which ones to save, but never want to delete an app that I have paid for.
How can I tell, either on the phone itself, or within iTunes, which apps were paid for, and which were free? They all show a purchased date in "get info" within iTunes, even apps that were free. I know some apps that I certainly paid .99 for, and some that I have paid much more than that. I would never want to delete those. How can I tell the difference?Ok, keep in mind, this is iTunes app store, not Desktop App Store, just so we are on the same page. I have a purchase history that looks like this:
http://dl.dropbox.com/u/340087/drops/01.02.12/this-f0-154400.png
If I go to the app Store, locate the exact app in question, this is what I get:
http://dl.dropbox.com/u/340087/drops/01.02.12/ss-2012.01.02-3.45.23.PM-57-154549 .png
Compare that to an app I did made a purchase to, Geocacging, and it is different. As you can see, it tells me that I can download it again, for free, and this is in no way a free app, quite expensive compared to most 99 cent apps:
http://dl.dropbox.com/u/340087/drops/01.02.12/ss-2012.01.02-3.46.56.PM-c4-154716 .png
I am logged into lCloud as far as I know. Here is a screen shot from system prefs:
http://dl.dropbox.com/u/340087/drops/01.02.12/ss-2012.01.02-3.49.06.PM-7d-154932 .png
It says "sign out" which tells me I am logged in.
I don't have an app within the apps section of itunes of the apps section of my phone when connectted by wireless of by usb cable.
So unles I am completely mising your instructions, I believe this to be on Apple's end, and they are not recognixing that I have already downloaded this app and paid for it. I am about to just download and pay for it again, it is only 3.99, so not a big deal, however, if this was a 100.00 GPA app or smilar, I would be a little upset.
Thanks for all your help. -
My computer states that I have multiple versions of outlook installed and that i cannot use icloud. How d if find out which versions are installed and which ne to delete without interrupting the other?
That's a Windows/Office problem. You should ask in the Microsoft support forums.
-
can you see which apps are open and/or running (like you can on an android phone by going to settings>applications>running services)?
Hi wjosten,
thank you for the help. I should have said I had a iphone 3. A friend has the same phone and she showed me how she can see what web pages are open when she double taps the home button. Mine is set to bring up favourites when I double tap (chosen from settings>general>home button).. BUT my choices are only HOME; SEARCH; PHONE FAVORITES; CAMERA or IPOD. I changed my choice to HOME but that just defeats the purpose as when I am at the home page and double tap nothing happens. Am I making sense? -
Properties that are updateable and which ones not using epma batch client
Can anyone provide list of properties (HFM/Essbase etc.) that are updateable and which ones not using epma batch client?
This will be documented in the batch client and related documentation on the EPM documentation portal
-
In which sequence are queries and sub-queries executed by the SQL Engine
In which sequence are queries and sub-queries executed by the SQL Engine?
Which is correct ?
a. primary query -> sub query -> sub sub query and so on
b. sub sub query -> sub query -> prime query
c. the whole query is interpreted at one time
d. there is no fixed sequence of interpretation, the query parser takes a decision on the flyIn which sequence are queries and sub-queries executed by the SQL Engine?
Which is correct ?
a. primary query -> sub query -> sub sub query and so on
b. sub sub query -> sub query -> prime query
c. the whole query is interpreted at one time
d. there is no fixed sequence of interpretation, the query parser takes a decision on the fly
Hi, below may help you understanding simple subquery & correlated subquery
refer :
http://sqlmag.com/t-sql/t-sql-starters-simple-and-correlated-subqueries
a) if it is correlated subquery
A correlated subquery is one that depends on a value in the outer query. In programming terms, you pass the subroutine an argument, then the subroutine evaluates the query and returns a result. You move on to the next record and repeat the process. The
net effect is that the subquery runs once for every row in the main query; this situation is inefficient.
A possible alternative is to rewrite the correlated subquery as a join. However,
some situations require a subquery. Eg- IN(with outer table refernce)
so main query -> subquery
b) if it is simple subquery
A subquery is a query that SQL Server must evaluate before it can process the main query, Eg- IN(with out outer table refernce)
so subquery-> main query
c) correlated query interpreted row by row with subquery, while subquery is interpreted at one time(outer table and inner table)
d) in most case it depends on the whether it is correlated subquery or simple subquery
Thanks
Saravana Kumar C -
What are unicode code points and how many are there and which are surrogate
what are unicode code points and how many are there and which are surrogate
Hi
see the links
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
Reward points for useful Answers
Regards
Anji -
I am performing some transactions with java application deployed on weblogic. I faced some issue of getting the transaction response with some delay. I found these below mention messages logged into the managed server logs.
Following is my datasource settings
Initial Capacity: 2
Maximum Capacity: 100
Capacity Increment: 20
Anyone have idea why these following errors coming.
####<Nov 26, 2013 2:25:41 PM PKT> <Info> <Common> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '25' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-1B6BE1217D118A188C49> <> <1385457941513> <BEA-000628> <Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.>
####<Nov 26, 2013 2:25:42 PM PKT> <Info> <Common> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-1B6EE1217D118A188C49> <> <1385457942413> <BEA-000628> <Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.>
####<Nov 26, 2013 2:25:43 PM PKT> <Info> <Common> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-1B71E1217D118A188C49> <> <1385457943792> <BEA-000628> <Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.>
####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748433> <BEA-001128> <Connection for pool "DataSource" closed.>
####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748433> <BEA-001128> <Connection for pool "DataSource" closed.>
####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748433> <BEA-001128> <Connection for pool "DataSource" closed.>
####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748434> <BEA-001128> <Connection for pool "DataSource" closed.>i know this,
The cause of the problem is: owing to the client's operations staff to modify the datasource ,and reployed
thinks -
Background jobs are scheduled in future date
Hi
A system which is used by a customer test system was installed and scheduled the jobs in 2010( in future date).
Now we have changed the date to current date. But still all the background jobs are in future date.
There are around 500 jobs are scheduled. And it not possible to reschedule one by one.
Is there any way workaround to change it back to current date format.
Best Regards,
JaiDear Jai,
The jobs scheduler should have this dates changed to current. If its a third party system which are running these batches, then be careful to convey the same message to the 3rd party.
If its in SAP, then the schedule change date should execute your jobs. At the same time, ensure that the transports between the test systems match to the destination.
Do let me know for any clarification.
Thanks
Madhu -
How to know which interfaces are going to which switch?
How to know which interfaces are going to which switch ?
I know that cdp will show this information. But CDP will not show info about the devices connected to my device and whose link between is administratively down.
Regards,
ChanduI don't want to the end devices location.
For example, i have a switch that connect to multiple switches few using etherchannels and few using stand-along ports.
So assume that one of the link whether it may be entire port-channel or a stand alone link that connects to another switch has been shut down manually by some x person...
Then how can i know that which interfaces are connecting to that switch. In this case i think CDP will not help because it will hold the information of ports that are up.
Regards,
Chandu -
Jobs are failing and give dump "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"
Hi ,
Jobs are failing and giving dump "TSV_TNEW_BLOCKS_NO_ROLL_MEMORY " and TSV_TNEW_PAGE_ALLOC_FAILED.
Here are the logs:
===================================================================
15.04.2009 07:11:35 Job started 00 516 S
15.04.2009 07:11:35 Step 001 started (program ZAPO_REALIGNMENT_MPOS_PA, variant AP_AP_REALG_S1, user ID aaa_bbb_apo) 00 550 S
15.04.2009 07:12:52 ABAP/4 processor: TSV_TNEW_BLOCKS_NO_ROLL_MEMORY 00 671 A
15.04.2009 07:12:52 Job cancelled 00 518 A
===================================================================
Job log overview for job: BIREQU_4DHSSKZ38YF3KALR4ZBRCDNQT / 00382400
Date Time Message text Message class Message no. Message type
15.04.2009 00:38:24 Job started 00 516 S
15.04.2009 00:38:24 Step 001 started (program SBIE0001, variant &0000000024435, user ID aaa_bbb_APO) 00 550 S
15.04.2009 00:38:24 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks) R3 413 S
15.04.2009 00:38:24 DATASOURCE = 9AZAP_AM R3 299 S
15.04.2009 00:38:24 ************************************************************************* R8 048 S
15.04.2009 00:38:24 * Current Values for Selected Profile Parameters * R8 049 S
15.04.2009 00:38:24 ************************************************************************* R8 048 S
15.04.2009 00:38:24 * abap/heap_area_nondia......... 2000683008 * R8 050 S
15.04.2009 00:38:24 * abap/heap_area_total.......... 2000683008 * R8 050 S
15.04.2009 00:38:24 * abap/heaplimit................ 100894464 * R8 050 S
15.04.2009 00:38:24 * zcsa/installed_languages...... ED * R8 050 S
15.04.2009 00:38:24 * zcsa/system_language.......... E * R8 050 S
15.04.2009 00:38:24 * ztta/max_memreq_MB............ 256 * R8 050 S
15.04.2009 00:38:24 * ztta/roll_area................ 100000000 * R8 050 S
15.04.2009 00:38:24 * ztta/roll_extension........... 8000683008 * R8 050 S
15.04.2009 00:38:24 ************************************************************************* R8 048 S
15.04.2009 00:38:54 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED 00 671 A
15.04.2009 00:38:54 Job cancelled 00 518 A
=================================================================
Please suggestHi,
Here are the details as follows:
ORACLE
10.2.0.2.0
=====
HP-UX
9000/800
====
Kernel release 700
Compilation HP-UX B.11
Sup.Pkg lvl. 108
ABAP Load 1563
CUA load 29
=============
SCM 5.00
SAP_BASIS 700 0011 SAPKB70011
SAP_ABA 700 0011 SAPKA70011
ST-PI 2005_1_700 0003 SAPKITLQI3
PI_BASIS 2005_1_700 0011 SAPKIPYJ7B
SAP_BW 700 0012 SAPKW70012
LCAPPS 2005_700 0004 SAPKIBHD04
SAP_AP 700 0008 SAPKNA7008
EA-IPPE 400 0007 SAPKGPID07
SCM 500 0008 SAPKY50008
SCM_BASIS 500 0008 SAPK-50008INSCMBASIS
QIE 200 0004 SAPK-20004INQIE
BI_CONT 703 0005 SAPKIBIIP5
ST-A/PI 01I_SCM500 0000 -
VIRSANH 530_700 0005 SAPK-53305INVIRSANH
========================
Thanks,
VK -
SQL query to know which users are working on which forms in APPS R12
Dear gurus
We need the SQL query to know which users are working on which forms in APPS R12, and how to get the user.name of those records.
thanks in advance
best regardsHi,
Please see this thread.
USERS CONNECTED
Re: USERS CONNECTED
Regards,
Hussein -
Where do I get to know, which planning area belongs to which DP Book ?
Hi All
Where will I get to see the details like:
Which planning area belongs to which DP Book?
Which Planning Object Structure is assigned to which Planning area and other stuff, I mean the whole tree?
Please do reply...
SnehaPunjHi Sneha,
You can do this in multiple ways:
1. T code: /SAPAPO/MSDP_ADMIN - Administration of Demand Planning and Supply Network Planning
Right click the planning area and choose "details". You can find all the corresponding details
2.Go to T code: /sapapo/sdp94
right click on the planning book "info about planning book", you would get the details
Thanks,Bopanna -
Determining which services are associated with which programs
In the Services Preferences, Services submenu, how does one determine which services are associated with which programs?
Danged if I know! I just took a guess and enabled the ones I wanted, then tried what came up to see which program launched to do it. Some are easy: "Copy to Tex-Edit Plus" will obviously use the program Tex-Edit Plus. But I have no idea which program owns "New Document Containing Selection" and since I want TextEdit to handle that sort of thing I unchecked it, and simply checked "New TextEdit Window Containing Selection" because that's obviously TextEdit. I left "New Window with Selection" checked, and then tried it, and TextWrangler launched. OK, I do sometimes use it, so I left it checked. But it would be nice if it declared itself in the Service list so you could tell what program is going to do which thing. However, that is not Apple's fault--it is the fault of the application, someone just didn't bother to write a proper line for the system to display that would tell the user what application it is. That is probably because in the "old" Services menu items were arranged in folders by application, so there was no special need to have the service itself declare to whom it belonged. Perhaps this situation will change as applications are updated for Snow Leopard.
I happen to know that the Services are declared to the system by the application, and the place this comes from is the Info.plist of the application, which is inside the application bundle. You can open this and check the plist: the service will be listed in the NSServices section in the NSMenuItem default field. Not something most people would ever want to do, you have to open the bundle then open the plist with Property List Editor.
Meantime, I think trial and error is the only way to tell where the service is coming from. I would be delighted if someone knows otherwise.
Francine
Francine
Schwieder -
How can we differ which is a fact and which is a dimension?
Hi All,
I'm a new bee to OBIEE...
If any one can help me out or provide me a link...
if we have multiple facts and dimensions? How can we differ which is a fact and which is a dimension?
Thnkx in Advance.Hi ,
You can identify the facts and Dimension based on the data.
You have to analyze.
Generaly the Table with measure column (Max column in the table) we will consider as Fact.
Table with attribute as Dimensions.
For the Facts we can apply the aggregate rules.
Thanks,
Ananth
Maybe you are looking for
-
Cannot import or view iPhone photos in iPhoto.
I am trying to import photos from my iPhone into iPhoto. My phone shows up as a device in iPhoto, but none of the image previews load and the import buttons are greyed out. With Image Capture I have the same problem, the device is recognized but noth
-
Dbms_output.put_line prints a varchar2(32767) variable partially.
Please help if anyone knows. I have an anonymous block that declares a variable as below: v_return_code varchar2(32767); I am appending characters that I am building in the begin end block to this variable and at the end printing it out using dbms_ou
-
MSGVERS_EXISTING error in proxy call
Hi gurus!! We have the following scenario: 3rd party -- SOAP -- XI -- PROXY -- R/3 We get the following error in sxmb_moni: <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/env
-
HT4089 Can I sort documents alphabetically in IOS Pages?
Can I sort documents alphabetically in IOS Pages?
-
hello everyone i have a question involving the mac mini and the xserve system. I am running a home video company and use about three different macs to edit. My server is currently a dual core xserve g5 at 2.0ghz with 3gb ram. it has two internal driv