Overvoltage on AI-110

I just finished an application using an cFP-AI-110 module.  I had
a +24VDC power supply which I need to supply a couple sensors, and I
assumed that I could use the same voltage to run through a couple
switches and just measure them with the AI-110 to get an on/off
state.  I have all the inputs configured for 0-10V.
However, when I applied +24V to one channel, I got 10.4 volt readings
on ALL the channels (except ch0 and ch7 which read about 7.5V). 
Is this expected behaviour?  Have I broken the rules?  The
AI-110 specs say that overvoltage protection is provided to +/- 40V on
the voltage inputs.  In an industrial control environment, +24V is
a very common voltage;  and since the Fieldpoint line generally
allows a 10-30V supply range, I think I should be allowed apply +24V to
an input without affecting the other inputs.
As it was, I got another power supply (+12V) and used them for my switches.  Oh well.
David Moerman
TruView Technology Integration Ltd.

David,
you're right, the overvoltage protection is rated with 40 Volts for the
voltage inputs for this module. If you supply the inputs with 24 V this
won't damage the module. The voltages you read, namely 10.4 are
expected for a overranged +/-10 V input. (see p. 13 of user manual http://www.ni.com/pdf/manuals/373280b.pdf).
Btw, there are modules available, that have higher input ratings, like the cFP-AI-102 module, or some digital input modules.
Hope this helps!
Good luck,
Stefan
Impossible is nothing - nothing is impossible

Similar Messages

  • RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

    HelloThank's for your helpsI hope this document is helpfulBest Regards,
    Date: Sun, 22 Jun 2014 17:10:17 -0700
    From: [email protected]
    To: [email protected]
    Subject:  when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
        when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
        created by Anoop9178 in Adobe Reader - View the full discussion
    Hi,
    Would it be possible for you to share the document?
    Regards,
    Anoop
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
         To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

    thank's for reply and your help
    i did the step's that you told me but  i still have the same problem
                                     i have the latest v.11.0.7
    i
    i disable the protected mode

  • Wireless printing problem with HP Envy all-in-one 110 when running Mac OS 10.7

    I just bought the HP Envy all-in-one 110. I have a Macbook Air running IS 10.7. I managed to install the software correctly and the wirless network light is showing on the printer. I ran a test page from the printer and all the settings say they are "enabled." But I still can't get the printer to print over the wireless network. When I plugged in a USB cable, I managed to get it to print. I have a wireless router running over the Sonic.net DSL network. Network strength is good. I've switched off and restarted all equipment several times but still no results. Help!

    Hi,
    I believe the router may not support Multicasting, a network protocol used for Apple's Bonjour service to operate as it should.
    Will be helpful to know the exact router brand and model.
    As a workaroung, you may try setting the printer by using standard IP, it should allow you to print, however the router issue (more likely) have to be handled first to allow the full software functionality including scanning.
    Follow the steps below to set an IP print queue, it will also help to better understand the cause for the problem:
    Enter System Preferences > Print & Scan.
    Click the plus sign.
    Click the IP icon.
    Select the HP Jetdirect Socket protocol.
    Enter the printer IP address into the Address field
    Now try printing using the newly created print queue, listed as the printer IP address.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • In Brazil. . . Do I need an adapter to plug in my HP Mini 110 into a 220 Voltage plug?

    Hi! I'm living in Brazil for a while and just got here. I have an HP Mini 110 and the plugs here say 220V. Is it safe to plug in my computer or do I need some kind of converter? If so what kind?
    My power is about to run out!!!!!
    Thanks in advance,
    Sasha

    No. The power brick for the iPod senses the voltage and adjusts for the different ones.
    You will need an adapter to switch form flat us pins tot the round pins used on their plugs.
    Allan

  • Mac CS6 Suite Adobe Download Assistant Error 110, 109, 108

    Hello,
    I am the IT Director for a Small College Campus and we are having problems with the Adobe Download Assistant in regards to downloading the Mac Adobe CS6 Trials. Regarding specifically the Design and Master Suites. I was able to download the Adobe Acrobat Pro XI trial as well as the Photoshop CS6 trial without problem, but when downloading the full Suite trial, I consistantly first get the 110 error, then if I try to restart the download from where it left off, I get an error 109 or 108. The download typically goes fine until the last couple percent, but near the end I get the error and can not restart the download short of starting over completely, in which case the cycle repeats.
    I've done everything in Solution 1 of http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html, with no success. I am also able to download the Windows version of the trial suites, inside a Parallels virutal machine running Windows 7 without error, on the same machine that gives me the error for the Mac version. It seems to only affect the Mac downloads. I tested the same download on the same machine, but off-campus and was able to complete the download, so I think it may have to be a communication error in regards to our firewall, but I'm not sure why it would only effect the Mac Suite downloads. Taking down our firewall completely is not an option.
    I have tried multiple browsers to start the ADA install from, as well as multiple machines running different operating system versions (Mac 10.8 Mountain Lion and 10.7 Lion/10.6 Snow Leopard - I'm not sure exactly which previous version it was) with no success. Both computers were on an Ethernet, hardline connection; no wireless. Any suggestions would be appreciated as our production department is starting a Creative Cloud account and would like to be able to use the download manager instead of the direct download links, from another support topic, I have provided them with for the time being, as they can be difficult to find at times, as well as less reliable.
    Thank you for any help you can provide.

    Creative Cloud uses the Adobe Application Manager as opposed to the Adobe Download Assistant.  You are right though the error messages which you are posting indicate a failure of the network connection.  Since the same computer works off your college network it does sound like a configuration problem with your firewall configuration.
    I would recommend working with the manufacturers of your firewall to determine how to properly allow access.  You may also want to review Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html which does provide some guidence for general system related errors.

  • Ajuda ERRO HTTPIO_PLG_CANCELED HTTP 110

    Senhores
    estou ajudando um colega iniciante em um projeto de PI GRC NFe e ele esta tendo o erro HTTPIO_PLG_CANCELED HTTP 110 no servico de verificacao de status de servidor, alguem ja passou por isso, afinal, para piorar o servico HTTP esta ativo no ICM que ja verificamos.
    Alguem?

    Dificil até supor o problem fazendo telefone sem fio.
    Manda ele criar uma conta e vir falar do problema diretamente, fica mais facil.
    Mas de qq maneira, manda ele testar a HTTP destination do GRC pro PI (que vai na SXMB_ADM -> Integration Engine Configuration). Dá a msm msg? Manda ele verificar se o servico HTTP tá ativo na SICF.
    Dá uma olhada nessa thread tb: SM59-HTTP Destination-ABAP PROXY [Server].
    BR,
    Henrique.

  • Error during upgrade from sap R3 4.7 ext 110 to ERP6 EHP4

    Dear all
    we doing an upgrade in test server to ERP6 with EHP4,source release is sap Entreprise 4.7 110.We have copied all the required DVDs to the server .During the configuration phase while giving the EHP package we got the error.
    EHP_INCLUSION.log details
    4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
    4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    4 ETQ010 Date & Time: 20100915210509
    2 ETQ732 Package descriptions uploaded successfully
    4 ETQ399 Looking for SAINT package for 'SAP_APPL' ...
    4 ETQ399 R3upReadNewPackages:
    4 ETQ399   patchType='U', langVect='DE'
    4 ETQ359 RFC Login to: System="MBD", Nr="00", GwHost="saptest", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "spda_read_new_packages" by RFC
    4 ETQ399   ismovesVersion='0'
    4 ETQ399 R3upReadNewPackages: exit: rc=0
    4 ETQ399      Found: name = 'SAP_BS_FND', release = '701', package = 'SAPK-701GGINSAPBSFND', type = 'AOX'
    4 ETQ399             (not usable, different component
    4 ETQ399 ... No matching package found.
    Is this related to the current SAP_APPL support pack version ?.currently we have
    SAPKH47031 SP 31 for SAP_APPL 4.70
    Regards
    Shahnas.S

    > i have few questions regarding above
    (Almost) all of your questions are answered in the note:
    > 2.Do wee need to apply the above note for non-unicode upgrade
    <...>
    Even on non-Unicode system you should replace all matchcodes that are still required by search helps.
    <...>
    > 3.Note 1330256  recomends to apply support pack or to apply the Note 1330256  ,but we can do it only at upgraded version.
    Yes - it avoids dumping with the dump mentioned in the note
    > 4.How to identify the matchcodes 
    <...>
    You can use the program TWTOOL01 to determine the existence of matchcodes.
    <...>
    > 5.How to delete them
    <...>
    You can then use the function module DD_MCOB_DEL to delete matchcode objects, and the function module DD_OBJ_DEL to delete matchcode IDs.
    <...>
    > 6.Impact of deleteing matchcodes
    None since they were replaces by search helps.
    Markus

  • Satellite P300D-110 integrated webcam is not functioning properly.

    Hello everyone,
    as the title says, the integrated webcam of my Toshiba Satellite P300D-110 is not functioning properly. Allow me to explain. Using the Camera Assistance Software I can take photo's and record music. If I try to record a video the preview screen turns up black and the end result tuns out black aswell, completely black.
    Whenever I try to use my camera with applications such as MSN Live Messenger, Skype or at community websites using Firefox, Internet Explorer or Safari the application in question crashes.
    *How did this happen?*
    You tell me. This is how it went;
    * Day 1: I've started up my laptop and looked at my fresh and clean install of windows vista home premium. I tried out my webcam using the webcam assistance software and it worked like a charm.
    * Day 2: Once again I boot up my laptop and try to start my webcam only to find out that it no longer functions.
    To give a quick summary of the thread;
    * Using Camera Assistance Software provided by Toshiba I can take pictures.
    * Using Camera Assistance Software provided by Toshiba I can record sound.
    * Using Camera Assistance Software provided by Toshiba I can _*NOT*_ record or preview a video.
    * I can not start my camera using any other application such as but not limited to; MSN Live Messenger, Skype, Mozilla Firefox, Internet Explorer and Safar.
    * I have downloaded and isntalled the latest drivers from the Toshiba website.
    * My laptop is about a week old.
    I'm not sure what more I can do, all I want is for the webcam to work, if anyone can help me out please do so.
    And if possible WITHOUT having to reinstall Windows Vista Home Premium.
    I haven't even used it and wouldn't want to make that a solution for all the problems that might occur in the future.
    Sincerely,
    a sad customer.

    Using Camera Assistance Software provided by Toshiba I can NOT record or preview a video.
    Can you please describe the steps how you try to do this? I must ask you this because it runs well on my notebook. When the recording is finished player opens and you can see recorded movie. It is avi format and at the top of this player you can see the path where the movie is saved.
    Most strange thing for me is that you cannot use it with Skype. Ok for MSN is not the perfect but there is absolutely no problem with Skype. Check the settings and it must work somehow.

  • Cannot find duplexing for HP Envy 110 on Mac OS 10.6

    Hi,
    So I just purchased the HP Envy 110 D411a printer mainly for the convenience of its automated double-sided printing feature.  However, that functionality doesn't work.  I went under my system preferences on my Mac OSX 10.6 and followed the directions; under the "driver tab" there should be a box that I can select for duplexing, yet that option does not appear.  Why is that?

    Hi,
    The Two-Sided option should not appear within the driver settings, as the specific model contain internal duplexing module and therefore enabled by default.
    Please follow the steps below and let me know if that helps:
    1. From the application used to print, click the File menu, and then select Print. The Print window appears.
    NOTE: The Print window might be minimized. Click the blue triangle next to the printer name to see all available settings.
    2. In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Check the box.
    NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
    3. To select the binding type click the lowest selection box listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.
    4. Select Layout from the drop-down menu.
    5. Set the Two-Sided option as Long-Edge binding (Portrait), or Short-Edge binding (landscape).
    You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Need to create a transport of SD config data from DEV 120 to DEV 110

    During our conversion some config modifications were mad in DEV 120 instead of DEV 110.
    I need to get the config:
    SPRO> Sales Distribution> Billing> Billing Documents> copy sales documents to Billing documents
    From 120 to 110.
    I have tried to force a transport creation in 120, and used SCC1 to import into 110, but no data comes over.
    How can I force all the data from these config tables to load into a transport so can send from 120 to 110.
    Thanks,
    Bev Barbush

    Hi Beverly,
    I would try bringing this transport in via STMS and then reviewing the import log to see why the data is not going across. What I've normally seen in this situation is the data was not correctly added to the transport before it was imported.
    I would NOT copy config tables back from the QAS system. Copying select portions of config data from one system to another is likely to break all sorts of logical relationships between tables.
    Have you guys tried running a config comparison between 110 and 120 to see what the actual differences are?
    Hope that helps.
    J. Haynes

  • New Pioneer DVR-110 installed, "patchburned", BUT drive won't stay closed.

    Have had some good advice on how to intall a new DVD/CD drive, but after installing a New Pioneer DVR-110 (I thought succesfully) on my G4, and downloading Patchburn for Panther, the DVD drive now won't function as the computer keeps ejecting or opening the drive tray.
    After installing the drive, I installed Patchburn, and Toast did recognize the drive. I then tried to verify disc permissions on the computer and it kept getting hung up during repair/verify saying it lost connection with the drive manager. Tried Onyx to repair/verify permissions and it too gets hung up. (Had to force quit)
    Any advice on how to get the drawer of the DVD drive to stay closed and what else I need to do to get it working?... Alas I can not even reinstall my original OSX software now as I can't boot from the disc drive since it won't stay closed.
    Thanks, Rob
    G-4 Quicksilver   Mac OS X (10.3.9)  

    You can verify the closeness by opening the empty drive door with the KB and then hold the door open and close drawer with the KB.

  • 2 GB Memory upgrade for HP Mini 110-3025tu

    I recently bought this laptop HP MINI 110-3025tu
    Specs
    -atom n475
    -1gb DDR2
    My problem/our problem is this.
    When i installed a new 2GB DDR RAM into MINI 110 and turn it on, it show black screen and no LED blink, just power button light on
    then i remove the new RAM and install the original one into MINI 110 and turn it on again, it still got black screen
    Please tell me if i can do something to fix this problem
    Much thanks!
    Joe

    Yes, the issue is with Memory Controller on N455/N475 processor. It is having issue with working, with any and every DDR3 memory module...Here is on going thread, where couple of memory module are listed, that reportly is working...
    http://h30434.www3.hp.com/t5/Hardware/HP-Mini-210-1102TU-Wont-Accept-2GB-ddr3-no-boot/m-p/317562#M32...
    http://h30434.www3.hp.com/t5/Hardware/HP-Mini-210-1102TU-Wont-Accept-2GB-ddr3-no-boot/m-p/318498#M32...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Problem with audio in 11.5.502.110, with a kiosk application from 2004

    Hi,
    In 2004 we developed a large scale elearning with games to assist kids in learning to read.
    We wrapped the flash into kiosk application and distributed it to schools on cd's. (we used flashplayer 6, for a windows executable).
    Now we are getting support calls about audio not working anymore  resulting in the application hanging.
    Although we wrapped application,  the application is still accessing some shared library, probably.
    Right now we are investigating the issue, trying to reproduce. for now I have a quick question: is this a know problem for 11.5.502.110 and will it be fixed?
    Thanks!

    You seem to have done everything that should have fixed the problem.
    Try a clean install as described in http://forums.adobe.com/thread/928315

  • Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

    Hello need help on weird happenings to my keyboard..
    Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
    All keys on keyboard is working and touchpad is also working.
    But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
    what do you think is the problem??
    Hardware Issue? or Driver Issue?
    please help thank you..

    Hello @MysticDragon ,
    Welcome to the HP Forums!
    I understand some of the keys on your keyboard are not working after installing Windows 7.
    I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
    Try this:
    1. Click Start.
    2. Click Control Panel.
    3. Click Clock, Language, and Region.
    4. Click Region and Language.
    5. Click the Keyboards and Languages tab.
    6. Click Change keyboards...
    7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
    8. Click on any other keyboards in the Installed services list.
    9. Click Remove.
    10. Repeat for all other non-English (United States) keyboards.
    You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
    Let me know if this works!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • How to configure a sql query of 110 lines in a DB Adapter

    Hi all,
    I have a sql query which is 110 lines and i need to use "select"operation in DB Adapter.I dont understand where to put the query in DB Adapter.I worked on a sql query which is 3 or 4 lines but this is the first time iam working on a sql Query with 110 lines.
    Please help me.Give me sme link or any document that i can refer.
    Thanks,
    Kiran

    HI,
    Please use the option of Custom Sql and paste it there.
    it does not matter what operation are you using but the xsd will form accordingly.
    If you need to do only via Select operation in the wizard, than select the tables and add pararmeters in the next screen and try to give the logic there.
    I feel the best thing to do would be with the Custom Sql query.
    And whatever variables you need to pass dyanamically.
    Just put an # symbol before to the column name .
    The variable will be formed.
    Thanks,
    Tirumala Dixit.

Maybe you are looking for