Ovi hangs while synchronize with MS Outlook

Ovi suite: 3.0.0.290
The Ovi suite hangs while synchronizing with outlook. Without the outlook-synchronisation the phone itself is useless to me.
See http://wtrns.fr/U-4pdrP4dOlnRO for the dumpfiles
with kinds regards.
Marcel Verberg
Solved!
Go to Solution.

Hi,
I found the solutions in the discussion link below:
/t5/PC-and-Mac-Software/PC-Suite-amp-E7/m-p/927229/highlight/true#M44166
Get ride of the ovi-suite and get the supported PC suite 7.1.40.6
And everything is working fine, updating, synchronizing outlook calender and contact.
Now I can finally use my E7-00!
Beware: do not update the pc suite, the latest version does not support the E7!
Enjoy!
Greetz, Marcel

Similar Messages

Blackberry Desktop Software only synchronizes with folder Outlook in Microsoft Outlook

Blackberry Desktop Software only synchronizes with folder Outlook in Microsoft Outlook. But, folders (.PST files) may be renamed and there may be multiple such folders open in Outlook at any time. I have six, none of which is named Outlook. Two of those are archival and four are associated and named for email addresses.The Desktop software should list the pst files checkboxes to indicate whether synchronization should be performed with them.

Well I believe I have figured out the answer to my own question, I ended up having to do a repair installation for Office 2010 and I was able to sync from outlook to the Blackberry.

My iphone is hanging while working with whats up. kindly help

my iphone is hanging while working with whats up. kindly help

I assume you mean whatsapp.
First double click the home button and swipe the app closed.
If it still doesn't work try a reset. Press and hold the home and power buttons until the Apple logo appears. Release both buttons. Wait until your iPhone starts on it's own.
If whatsapp is still giving you problems try deleting and reinstalling the app.

HT1665 Can the iPhone 5S synchronize with Microsoft Outlook

Can the iPhone 5s synchronize back and forth with Microsoft Outlook?

This may help: http://support.apple.com/kb/TS2776

Contact Synchronization with Microsoft outlook 2010

Hi I am unable to configure a specific folders for synchronization with my Z10.

Hi
Goal is to synchronize selective ( saved in single Folder / group) contacts with Blackberry Z10.
Created Separate group for Blackberry
Z10 is connected to computer with USB Cable and Link
On linke when I select Contacts / Calendar > Contacts Configure > Folders to Sync
I don't get any folder selection on the Link. Not sure if I am doing anything wrong or some bug.
Regards,
Kaushik Patel

Synchronization with Microsoft Outlook

I recently purchased a curve 8900 and installed a micro 4gb card.
I have a very large list of contacts in my PC Microsoft Outlook, but I do not use my email address with it.
I am very much interested in transferring many of those contacts to my BB but I have been told (don't know wether it is true or not) that if I synchronize my PC with the BB, all of the MSO contacts will be transfered to the BB and not to the micro card.
My question or questions are:
1) Is there a way or program that will allow me just to transfer the contacts that I choose from my MSO to the BB?
2) If there is a way, how can I have them transfered, if possible to my micro card?
3) Is there a booklet or place that can guide me to learn about this or any other questions that may rise?
Thank you very much for your kind attention.
Solved!
Go to Solution.

When you go into the synchronization options of the calendar you can set it to transfer all items instead of future items.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

System hangs while working with Adobe forms in Eclipse

Hi,
I am new to SAP ABAP and ABAP in Eclipse. So far we were using SAP GUI, but now we are moving towards Eclipse for ABAP.
I am creating adobe forms in eclipse using Open with SAP GUI option. I am able to create and execute in eclipse but it always hangs when I try opening the layout and then closing it. Once it hangs, I need to kill Eclipse process from task manager. Can anybody help me?
Thanks in advance.

Hello Hemika,
What is the version of Adobe LiveCycle designer on your PC ?
Looks like the Adobe LiveCycle Designer and NWDS versions are incompatible .
1055911 - Creating ZCI based interactive Forms in Web Dynpro for Java
1090464 - Interactive Forms-Web Dynpro Java-Limitations/Recommendation
Regards
Sandy

Why does Firefox NOT synchronize with Windows Outlook e-mail on the SEND, REPLY, MOVE, etc. line?

The line of above choices is mostly unreadable. Only a small portion of the top of the choices are able to be read for selection.

A possible cause is that you have increased the minimum font size.
If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Synchronization with MS Outlook

Sync contacts is in a state where Desktop Software version 7.1. report that reads, but it reads long and is still in a state of 1 in 413 and still nothing. Why does not report an error, which may be a problem?

The problem is really in version 1.7. , I switched to version 6.1.0.36. and everything works without a problem, as before.

Blackberry Curve synchronization with add-in apps is SLOW!

I recently bought a Curve. Mu deskstop machine is an uptodate laptop. BB synchronizes with MS Outlook just fine. But I've installed desktop and BB versions of Splashshopper and FlexWallet. When I synchronize them, they are very slow -- meaning 5-10 minutes. The delay with Splashshopper comes on the dialog "updating handheld;" with Flexwallet with the dialog "saving records." If it was just one program I'd suspect it; but because it is both I assume the problem lies with the BB. Any help, please? (And by the way, I'm new on this board, and I'm finding that when I press "enter," rather than insert a new paragraph below a new line is inserted at the beginning of the message. Any help with that?) Thanks much.

Welcme to the Frums!
Who is your service provider?
Nurse-Berry
Follow NurseBerry08 on Twitter

Ovi Suite 3 and Outlook synchronization with E65

With the last version of Ovi suite 2 I was able to synchronize both contact and calendar with my Outlook. After installing Ovi Suite 3 I'm able to Synchronyze only contacts but not the calendar. The Option to synchronize the calendar is not available in "Synchronization Options".
This is my configutration:
Nokia E65 connected with Bluetooth
Windows XP Pro
Outlook 2007
Ovi Suite 3
Can someone help me? Calendar Synchronization is foundamental for my work.
Thank you in advance.

Hi,
I guess there might be ccorruption while install, becasue calendar sync is supported. Please be informed that there is a new version of ovi suite i.e 3.0.0.290, with improved features and many bug fixes. Or you can download from www.nokia.com/ovisuite
Show appreciation by clicking the kudos star :-), or gesture by typing thanks

Synchronize N8 and Outlook 2010 with Nokia OVI Sui...

PC Toshiba with Windows 7 (x64)
Nokia OVI Suite 3.0.0.290
N8-00
MS Outlook 2010
Language is French for all
No problem to synchronize Contacts, Photos, Messages, Notes, Bookmarks and RSS Flux.
Problems:
1. OVI can't synchronize Calendar and tasks. THIS IS CRITICAL IN MY JOB.
   Nokia PC Suite 7.1.60.0 doesn't support N8.
   How to synchronize Calendar and Tasks with Nokia OVI Suite?
2. There is no way to see nor manage Calendar and Tasks with Nokia OVI Suite.
   Those options were handled with PC Suite.
3. OVI is slow and not really stable!!!!
Thanks for your help
NB:
This is the third times I experience the same problems with OVI. The other times, I went back to PC Suite.
I thought that OVI was mare adapted to with my new N8. It seems that it is not the case again.
Attachments:
Agenda et tâches 110329A.GIF ‏20 KB
Agenda et tâches 110329C.GIF ‏15 KB
Agenda et tâches 110329D.GIF ‏13 KB

Could you please try this?
1. Please, check on Task Manager (press ctrl+shift+esc) if you see NokiaOviSuite.exe process twice on the process list? If yes, kill all the instances of NokiaOviSuite.exe, nokiaaserver.exe and NokiaMServer.exe. If not, a reboot should fix the issue.
or
2.Choose from Sync menu “Repair sync”. This operation may create duplicate entries in case the sync engine is not able match the records from different end points with each other. Also, all the deleted items which have not been removed from the other end points will be restored to the end point where the item was deleted.
or
3. Update phone software (Please take backup before going for software updates.
or
4. Atlast uninstall NOS
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Outlook hangs up on Send/Received Progress while sync with iTunes.

My Microsoft Office 2007 Outlook gets hung up on "Send/Receive" Progress (Status 75%) while syncing with iTunes.
I am syncing my iPhone 3Gs with iOS 4.3.3 with my computer.
What is causing this?
Thank you.

I ended up setting the iPhone back to factory settings and then setting it up as a new iPhone rather than trying to use things from my first generation iPhone in iTunes to set up the iPhone 4s. That worked, but the language was Finnish (I think) and it took a while to find the settings by "guessing" what the menu buttons read.

ITunes 11.1.4.62 freezes while syncing with Outlook

Hi,
After installing iTunes 11.1.4.62 syncing my iPod Touch (4th gen - iOS 6.1.6) with Outlook 2010 no longer works (I'm using Windows 7 64-bit Ultimate). The syncing process hangs while "preparing to sync" or while "syncing calendars". Strangely enough, uninstalling / cleaning / reinstalling iTunes makes the problem disappears... for just one Windows session. After a reboot, the problem re-appears and there's no way to sync again until I uninstall / clean / re-install.
The device is always recognized by iTunes when connected. No problem.
When the synchronization process freezes (or waits forever) I can sometimes cancel the operation. Very often, I have to kill the iTunes process.
Any know fix ?
Thanks in advance.

Thank you very much for reminding me this oddity. Yes I'm running ESET NOD32, latest version. I had alreedy read this report but I checked the presence of the ESET_OPTIONS environment variable by running the SET command in a command prompt window. It was not visible. So I concluded I was not affected. Wrong guess. After reading your post I checked again by using Control Panel | System. It was there. So I deleted it and rebooted. Bingo! iTunes is now syncing correctly, even after a reboot (still using version 11.1.3.8 - version 11.1.4.62 behavior is different so I'm wondering whether it is suffering from the same problem).
Oh good!
Apologies for the nosy question, Samoreen ... just trying to clarify what went on. Did you have to uninstall the Eset product? Or was the deletion just of the environment variable? If the latter, could you walk us through how you went about it?
(Hoping to work up some instructions for other folks running into this sort of trouble ... there seem to be a few people about with non-Mobile-related syncing issues with the new version, and with any luck this might help with a bunch of them.)

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

Ovi hangs while synchronize with MS Outlook

Similar Messages

Maybe you are looking for