Ovi mail web browser access isn't working

Hi all,
Wonder if anyone else has this problem. My Ovi mail which has been working beautifully all this time has suddenly decided not to show me any mails.
I can see the mail headers displayed in the upper portion, but when I click on it, it doesn't display the mail content.
Any solutions?
Thanks in advance.

I'd maybe try doing a search for Safari on your iPad first (swipe to the left to search). If it shows up in that search you can go to Settings > General > Reset and choose 'reset home screen layout' which will put it back where it would be by default.
All else fails? Restore it.

Similar Messages

My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?

My ipad mini doesn't have a web browser! Help. I can't access the internet or iTunes or the app store. The web browser icon isn't even there.Anyone know what to do?

I'd maybe try doing a search for Safari on your iPad first (swipe to the left to search). If it shows up in that search you can go to Settings > General > Reset and choose 'reset home screen layout' which will put it back where it would be by default.
All else fails? Restore it.

Ovi mail web access interaction with Yahoo groups

Ovi mail is powered by Yahoo mail, and I have one Yahoo account solely for use with ovi mail. I have another Yahoo account for accessing (a lot of) Yahoo groups. I can't have a web interface up for both on the same computer at the same time because they interact and want to use the same account. If I start Yahoo groups first, then start Ovi mail and log in, the Yahoo Groups window changes to the Ovi mail Yahoo account. Nokia, ask Yahoo to fix this, please! Cheers and TIA!

Hi Alex,
Please check the AdminCount value in Attribute Editor tab for this ArchiveMail account. Confirm if it is set to 1 which indicates that this user is a protested account which is protected by AdminSDHolder.
If that it the case, please clear the value for this attribute and check whether the issue persist.
Regards,
Winnie Liang
TechNet Community Support

Pix 501 PDM 30 - can't get web browser access

I just got two used Pix 501 units, and cannot get the web browser working. OK to first login box with blank username and password per manual, click Yes to certificate popup, "Loading Startup Wizard" prompts for username and password - blank is NOT accpeted here.
Get java.security.AccessControlException: access denied in lower border of browser window.
How do I get past this?

Phil, this is a known issue with certain old versions of PDM.
Refer to this link for work around.
http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_field_notice09186a008046c805.shtml
also try java update
Java runtime environment version 6 update 2 is available , try this and see if it resolves the issue
http://www.java.com/en/download/index.jsp
Jorge

TS4532 My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange using the web browser. The connection worked until IOS 6.1.2 was Install

My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange with the same parameters using the web browser.
I bought the phone when it came out last October. The connection did not work at first, then started without warning in December. It worked perfectly for 2 months then stopped again when IOS 6.1.2 was Installed.
Help please!

I have forwarded these questions about the version of Exchange server that is being used and whether Microsoft host the mai themselves to the IT Dept but I will not get a reply from them until tomorrow.
In the meantime I have also tried:
Deleting and re-creating the account AGAIN!
And re-setting the phone (recommended as a solution to a similar problem with an iPad in another forum.
But please remember that:
The phone would not connect for 2 months after I bought it
Then started working unexpectedly in December
Then stopped working again when IOS 6.1.2. was installed
Also why am I the only person affected by this when colleagues with iPhone 3s and 4s who use the same mail system are not (I am still trying to find one with an iPhone V to see if their's works).
Like I said I think that there must be a fault, either with my own phone or with iPhone Vs in general.

Orion-web.xml access-mask not working

Hi, I am trying to restrict access to a specific application via the orion-web.xml descriptor. This would be OC4J in OAS 10.1.3.4.
I have done this in the GUI by using the "Advanced Deployment Plan Editing -> Edit Deployment Plan" option. I thought this would be safer than editing the files by hand. The application deploys successfully, and in orion-web.xml of my deployed application, this translates into:
<orion-web-app
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/orion-web-10_0.xsd"
        deployment-version="10.1.3.4.0"
        deployment-time="1241707803607"
        jsp-cache-directory="./persistence"
        jsp-cache-tlds="standard"
        jsp-taglib-locations=""
        temporary-directory="./temp"
        context-root="MyApp"
schema-major-version="10" schema-minor-version="0" >
        <access-mask default="deny">
                <ip-access ip="127.0.0.1" mode="allow" netmask="255.255.255.255" />
                <ip-access ip="192.168.0.100" mode="allow" netmask="255.255.255.255" />
                <ip-access ip="192.168.0.101" mode="allow" netmask="255.255.255.255" />
        </access-mask>
        
        <resource-ref-mapping name="jdbc/myDB" location="jdbc/myDB" />
        <web-app>
        </web-app>
</orion-web-app>This looks OK to my eyes, but unfortunately it doesn't restrict any access at all. I have restarted the specific application, and I have also restarted the entire OC4J. No access is restricted; I can pull up the application from any IP address. My intention was to restrict access only to the 2 IP addresses (and localhost by IP) listed above.
I have reviewed multiple metalink articles on this topic:
Note 438493.1 - How to Restrict access for EM Database Control only from Specific Hosts / IPs
Note 178665.1 - How to Restrict Access to OC4J to Specific Hosts or IP Addresses
Note 311137.1 - How to restrict access to EM website based on IP Addresses/Domain Names
None of them seem to indicate that I have done anything wrong.
If anyone has any feedback on this topic, identifies a problem with my config, or has knowledge of a product bug, please respond to this thread.
Many thanks in advance for your feedback.

were you able to resolve this?

Browser 'find' isn't working. no popup appears for search criteria.

I often use the 'find' function on the browser to locate a phrase I may be looking for. It now just sits there when I press find on the menu. Nothing appears.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
It is possible that the screen is too high and that the find bar and status bar fall off at the bottom.
Open the system menu via Alt+Space and see if you can resize that window.
If that works then close Firefox to save that setting.
See also http://kb.mozillazine.org/Resizing_oversize_window

Just bought an iPhone 5C.. Safari is non-functional! A blank frozen screen! Any one else experience this? Horrid design Apple! It's your freaking web browser! Google Chrome works but not Safari! I may simply return this "upgrade" unless someone can help

Just bought an iPhone 5C.. Safari is non-functional! A blank frozen screen... What gives? Safari is Apple's browser for gods sakes! Google Chrom works but not Safari? This is nuts. This is an "upgrade"?? Anyone else experiencing this? Or should I just give up and return this

Are you always like this?
First try a Reset: Hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.

C3-00 chat : "no service available" + OVI mail won...

Hello all,
Bought a C3-00 goldenwhite 3 weeks ago, though never succeeded to connect to all the OVI applications (OVI chat, OVI mail + communities), which are the two main features that are the reason why i bought this phone
- chosen connection mode : WIFI only (because prepaid card)
- device system version 7.20 (upgraded last week, thought it would resolve the OVI chat/mail issue) : update causes me all audio files downladed from ovi store to be "corrupted file / license expired" whereas it was free content, deleting files and downloading again doensn't bring improvement to the issue
- restored factory settings but no improvement on OVI chat/mail application issues
- called my operator: unlocked access to OVI mail "settings" part but wonce account is created, the "connection" wheels runs for a while but nothing happens / still have the "no services available" problem in ovi chat while communities keeps on "updating profile" but nothing happens as well soI don't have proper access to my profile (because "updating profile still runs)
precision : i have no problem to connect to OVI store or any other website through the navigator, issue of "no service available" (chat) and neverending connection (ovi mail) that prevent access to mail is only with those 2 application + communities
eBuddy works fine
are there any settings to update?
thank you a lot for your help

@Nnova031: hello Well yes, youtube can work if You will make UDP configuration with some ports redirected on router, but this is no slution for me, because i have many wireless connections (few computers, wifi printer, other mobile phones/pda devices, and server with is got all ports redirected on it, rest of devices are using NAT).
The key to make everything work as it should is Nokia. They must fix using TCP/IP over WiFI (with NAT) by their apps. Without them they are just not useful, because all people bought this phones thinking they will use wifi and those really nice apps. Those apps are working well on GPRS/EGPRS for many reasons (like using some proxies by operators in configuration, by using external IP by device so all ports can be opened and waiting for data, while it is sooo insecure like hell, etc.).
I think it should be priority one for all Nokia developers to fix that, because they are selling product, that do not have options. that are reason 90% of all their customers did buy it. It is like buying car, that cannot drive without towing car.
Don't say you want to help - just do it! Happy user of Nokias: 6150 SAT (still work), 6021 (used as backup, still work), 5220 XpressMusic (Drown, screaming for Contact Service), C3-00 (my current phone).

BADI - BBP_CATALOG_TRANSFER - Debuging in web browser

Scenario:
The end user will launch a catalogue via the EBP system. The user will search for materials and services within the catalogue search engine. The materials and services will be displayed with the numbers from the R/3 system. The end user will select the services and materials from the catalogue and the data will be transferred via OCI interface into the shopping cart of the EBP system. The master data for materials and services within the catalogue wont contain any leading zeros like in the R/3 system.
Requirement:
I want to stuff leading zeros to the material/service number when data gets transfered, so I am trying to use BBP_CATALOG_TRANSFER BADI. I have stated coding ENRICH_ITEM_DATA method but unable to test the data. I like to know how to debug the code... since I am viewing it in web browser breakpoint is not working... how to put some message or write statement and view it in browser... and which parameter I need to use to get material no.
Advance thanks.
Regards,
Balaji Viswanath.

If you set an internal break point in Badi ENRICH_ITEM_DATA then the BADI code ‎does not stop, but if you set an external break point in the code with the same user that is ‎used to run the shopping cart then the it will stop at that external breakpoint in the BADI.‎
‎ ‎
I have done this on a number of occasions.‎
The trick that I stated above :- ‎
‎1) Login as i.e. EBPREQ2 set the External Break point ‎
in the code this will be active for the next 2 hours for User EBPREQ2.‎
‎2) Then bring up the Browser then login as EBPREQ2 ‎
into SRM and go shopping then when you submit order ‎
R3 will do a stop inside that BADI.‎

Need help for c6 ovi mail

hi there,i have a nokia c6 00 .all apps including ovi mail app (under email options)was working fine till one day i decided to restore factry defaults.and after that problem started.as u knw there is a widget under email which says which mail a/c u wld b using.evry other email provider has a widget bt nt on ovi mail.whn i try to login instead of showing the username and passwrd widget it redirects to the ovi page.there also i tried to enter my credentials.after sometime it says choose ur mailbox and press next.upon doing that all of a sudden the internet connection gets cuts off for 5 seconds and after that connects automatically.by that time the page says cannot define mailbox .please try again later.i need help in this bcoz all my imp mails are there on that mailbox.and fyi the phone is updates to recent updates.and also all the other mailbox are working fine apart from this ovi mail.it is not showing any widget to login.instead it is redirecting to webpage.thanks in advance .roy

http://nmota.messaging.nokia.com/clients/Social_1_2_update.sisx
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Save to Web Color Shift with sRGB Working Space

I'm having a problem a lot of other people have, which is the color shift when saving to web or viewing my work in a web browser.
The solutions I've found in the past have been to simply make sure my working color space in Photoshop is sRGB and that my files are being built with that profile as well. I'm under the impression that sRGB is essentially the same color space as is used in a web browser, and therefore my work should look identical in both Photoshop and a web browser.
So why am I still getting a color shift? Everything in a browser appears darker and with more contrast, as though the colors have been pumped up a bit.
My monitor color has been calibrated with a Spyder 3 Pro and I'm using the profile it created for me as my OS X color profile. Thinking the shift may be related to my monitor profile, I tried switching to other profiles, but I still get a color shift in every single one.
Any ideas? Thanks!

sRGB based on capabilities and trends of development (circa late 1990s) for commodities CRT computers displays. sRGB per se has nothing to do with web browsers. The reason it has become associated with the web is the assumption that most web users are looking at content using a commodities CRT monitor using Microsoft Windows.
It should be obvious that the use of a standard of some kind for display is better than none if there is to be any trend towards predictability of image display. Today, in commodities computing, that standard is sRGB: neutral color where R=B=G, and a gray ramp and primaries typical of the electron gun and phosphors used in CRT displays perfected for use in color television. It just so happens that this coding is rather will suited to get good value out of a minimum numbers of bits for color representation (e.g, 8 bits per channel 24 bit color)
Web browsers in and of themselves don't have a color space. A few, such as Mac Safari, use the ICC color management capabilities of the system, and these display compensated color just like Photoshop does: if the image is tagged with an ICC profile, compensation will be applied in the browser window. But for the vast majority of computers and users, browser color is monitor color, and it's easier and most reliable for designers to just assume sRGB because it's the space that's the best approximation of the internet at large.
You work usually will not look identical in Photoshop and a web browser (assuming that the browser does not or cannot do color management) because Photoshop is always soft proofing the working space onto the display. It is this quality that leads you to see parity between photoshop and the web browser when you choose you monitor profile as the working space: the soft proof produces no compensation.
But while this fixes up your local experience it is -not- the solution because this projects your monitor characteristics into the image when you share it. For example, if your monitor has a lumpy non-linear tonal response and you correct image shadows or saturation for a certain look the image data will code your monitor response as well as your intentions for the image appearance. Others will see the combination of your correction for your monitor response mapped over their monitor response, in fact they will see an inversion of your monitor's response coded in the image, and to whatever extent your monitor deviates from the norm is the extent which at the very least others displays of the images you correct will deviate from your intentioned look.
The answer to your problem--and this may surprise you--is to tolerate and appreciate the difference in display between photoshop's rendition of color and your browsers. Photoshop is showing your image more truly--within certain significant local limits--in terms of your working space than your web browser. By choosing an appropriate working space, and for the web it should be sRGB, and by profiling your monitor as you have, you are ensuring your images are normalized to current standards for web presentation. Others may still see crap, but it's most likely their problem and if they don't want to do anything about it that's their problem, not yours.
There are a wide variety of reasons why a properly calibrated monitor will not match a working space which the soft proof cannot overcome. A monitor gamut larger than sRGB is not one of them. Photoshop will properly display sRGB data if the display profile properly characterizes the larger gamut display. This leads to questions about the effects of monitor quality on workflow. Maybe the most important of these is "How do I know my Spyder has properly calibrated my display!!!" But this is a topic for a whole 'nother thread.
Where I run into trouble is when trying to make visual color comparisons during web design between my photoshop website mockup and a published site. I get confused and try to make color picker style matches by eye rather than by the numbers because I forget my web browser is not color managed. Sometimes I forget how all the parts play together and get confused and disoriented, then I make compounding mistakes. Then I start blaming my tools. Pity me.

"Use Firefox Web Browser (default)" instead of trying to render a page starts FF again

Expected behaviour: Firefox actually trying to open a document.
What happens: Firefox, ''as the default option'', re-feeds a document to itself in a roundabout way that leads only to repeating the same choice. If "Do this automatically..." box is checked, this causes ''spamming tabs or windows recursively''. Which certainly constitues a bug.
Happens e.g. when trying to open HTML pages that have ".asp" extension due to being saved with original server filenames. Which also is the easiest way to reproduce this bug. Same files renamed or ''hard''linked as "*.asp.html" open normally, thus it happens only due to "Open with: Use Firefox Web Browser (default)" choice not working correctly. I didn't find addons to circumvent this, either.
Version: 26.0 (Mozilla Firefox for Ubuntu canonical - 1.0) - but a web search shows that the same happened 10 years ago and under Windows.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Ovi Mail and Outlook 2010; from/subject/date field...

I'm using Outlook 2010 version for my home laptop and tuesday evening all incoming mails missed information for sender, subject and the date/time fields. Connecting to Ovi mail by browser, all these information is existing on mails.
Is there has been change on server setup after moving to Yahoo servers??

Mail messages always include more headers than are normally shown by the mail client. Sometimes people may wish to examine the full set of headers to check the veracity of a message, or to determine its actual origin, and generally when trouble-shooting. You control whether or not you see them with menu View/Message/Long Headers, or you may have a button for it on your toolbar.
AK

Writing HTML to Netscape w/ Servlet isn't working

I am writing a servlet program that resides on port 8080, after there is an input from a form on a HTML page the servlet take the input and then sends HTML.
The problem is, that it just shows the HTML code and not the formatted page. I use a PrintWriter to write the HTML code to the web browser. The code works fine in Internet Explorer, but in Netscape 4.xx and 6.xx it doesn't work at all.
Does anyone have any idea what could be causing this or how I could fix it?

You use the next Content Type?
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("<html>");
out.println("<body bgcolor=\"white\">");
...

Ovi mail web browser access isn't working

Similar Messages

Maybe you are looking for