Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

Similar Messages

Contacts don't show after firmware update (V05.23)...

After a firmware update I can't restore my contacts.
If I tried to enter them manually, I have the message "Contact saved to phone memory" but my contact list stayed empty.
Apparently they are really saved somewhere in the phone, since I can see them if I synchronize my phone with my PC. Bt there is no way to access them from the phone.
Anyone had a similar issue before ?

Very same problem with my 6730c. Updated firmware from Menu > Settings > SW Update. Now I fully cannot access my contact book (all contacts are stored to SIM card). These can be used from any other phone. When a person from contact book calls me it shows name. I can only call people who called me and so saved to Logs. Please update firmware as soon as possible, I wish to use my phone

HELP Boot Camp won't start after firmware update

Hi Guys,
I just bought a XP CD and installed 10.4.6 and the latest firmware update for my XP installation. So I downloaded Boot Camp, and when I go to the assistant in utilities a window pops up and it says "You must update your computers firmware to use this assistant"
So when I check MacBook Pro SMC Firmware update also in utilities it confirms I have the latest firmware 1.0.
I have repaired permissions and still nada...
Can anyone determine what is wrong? Any help would be greatly appreciated
Thanks
Pete

i think the SMC update != overall system firmware. did you update ur machine to firmware version 1.01? heres a link http://www.apple.com/support/downloads/macbookproearly2006firmwareupdate101.html

Illustrator cc don't start after the new update

Illustrator CC don‘t start after I update this. I should loading the font Verdana, but Verdana is activ. What can I do now?

saure sahne,
Are all the faces of the Verdana and Tahoma fonts installed and enabled/active?
Did you receive a message about Verdana?
Is your OS Mac OSX 10.6.8? If so, you will have to upgrade that or roll back the update. You can see instructions for the latter here:
http://prodesigntools.com/adobe-cc-version-control.html

My iPod nano 5th generation is not recognized by iTunes. I did update, but still, it won't work. I don't want to uninstall the iTunes cos I don't want to lose my music and audio books. What to do? It started after I updated iTunes.

my iPod nano 5th generation is not recognized by iTunes. I did update, but still, it won't work. I don't want to uninstall the iTunes cos I don't want to lose my music and audio books. What to do? It started after I updated iTunes.

iPod appears in Windows but not in iTunes

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Firefox will not start after interrupted update to 5.0

Lenovo x200 | Windows 7 32bit | Firefox 5.0
I was updating Firefox from version 3.6 (I think) to 5.0. Simultaneously I had done a update on Windows that seemed to have stopped. The update of Firefox had also come to a stop. As I remember it the installation was complete, and I was attempting to start the program, when Firefox was checking compatibility with installed plug-ins and so forth.
The Windows updates installed fine afterwards but after several reinstalls of Firefox, I still can't seem to get it to start.
There is no error message or notification at all when trying to start Firefox.
One processes is created, staying steady at 50% CPU and 26 404 K memory.
If i try to open another instance of Firefox I get a process that takes 0% CPU and about 1 844 K memory.
Summary:
Firefox fails to start after interrupted update to 5.0 from 3.6.
There is no error message.
Firefox never starts (and the process never shuts down), just shows in the Task Manager under Processes steady at 50% CPU and about 26 000 K memory (I've seen it do this for at least 20 minutes, before terminating it).

Thanks kenton. But now pop-up says beta 5.
The ''real issue'' is what is going on. On one machine the update process works, but on my other machine it does not.
The machines are identical IBM T60s with Windows XP.
This is a real mystery, as well as being annoying.
A clue or suggestion any one?

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and Network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.

Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

Can't install OS 9 on CRT iMac after firmware update

This is a bit long winded, sorry!
I bought a "working" 2001 iMac, 500MHz, slot-loader, 20 gig HD, CDRW off eBay (the CDRW didn't!) that ran in OS 9. With an external CDRW it worked well, booting the OS discs fine.
The previous owner had left his details on a supposedly deleted OS X account, so I decided to do a clean install to remove them with a supplied disc. I noticed in Utilities that a firmware update was available, 4.1.7, so used it, then did a clean OS 10 install, remembering to install the OS 9 drivers too. I bet you can guess what's coming!- yes, the OE discs wouldn't load OS 9.
Having read postings on this forum (thanks, guys!) I bought a retail version of 9.1 to use, the white/gold one with Sherlock, but this won't load either.
The main problem facing me now is that I can't update to a proper OSX without updating the firmware to 4.1.9, for which I need OS 9 installing!!! (I'd quite like OS 9 back too!)
I've reset the PRAM,and even wiped & reformatted the HD and reinstalled the 9 drivers again using the OSX disc and then powering down (you're not meant to, I know!) and still I couldn't load 9 up, trying both ways to load, just getting the "question mark on floppy" symbol.
Any help, please? Haven't tried target disc mode transfer yet, but could get another machine to do it.
Thanks for your patience with this matter, Mark Mac.

I had a similar problem once (I'll spare you the details!) and what I did in the end was this:
1. Take the hard drive out of the iMac and put it in a FireWire enclosure.
2. Erase it and put OS9 on it down the wire from another working Mac. You don't necessarily have to use the installer CD; you can just copy the OS9 system across from another Mac and it will work as a valid system.
3. If you don't think it installed properly (as mine hadn't) put the installer for the firmware update into the startup items folder of the OS9 installation.
4. Put the HDD back into the iMac and reassemble.
5. Turn it on, whereupon it should automatically start the firmware update, running natively in OS9. Delete the firmware update installer from Startup Items.
6. Update to 9.1 if not already, as that is the minimum for installing OSX
7. Restart in 9.1, introduce OSX install discs and begin installation.
I know all this sounds a faff, but it worked for me and is quite logical if you think about it - not much can go wrong as long as you don't wreck the iMac while taking it to bits. One extra tip: don't install anything later than Panther on an iMac G3, because it won't be happy. And even with Panther, you might want to consider installing using XPostFacto (see versiontracker) which helps older Macs cope.
Good luck - let us know how you get on.
N

When adding a yahoo email account I keep getting "Server Unavailable" notification. This started after I updated my software. I deleted my accounts and tried to re-add them but continue to get this notification??

When adding a yahoo email account I keep getting "Server Unavailable" notification. This started after I updated my software. I deleted my accounts and tried to re-add them but continue to get this notification??

hello, this is a scam tactic that is trying to trick you into installing malware, so don't download or execute this kind of stuff! as you've rightly mentioned, you're already using the latest version of firefox installed and you can always initiate a check for ''updates in firefox > help > about firefox''.
you might also want to run a full scan of your system with the security software already in place and different tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] & [http://www.kaspersky.com/security-scan kaspersky security scan] in order to make sure that there isn't already some sort of malware active on your system that triggers these false alerts.
[[Troubleshoot Firefox issues caused by malware]]

Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150;30

Photshop Elements 8 for Mac doesnt start after I update to OSx 10.7.5 every time I try to lunch it I get an error message 150:30

Yes, Actually was done from an Apple Genius at the apple store, the hard Disk was formatted and then re installed everything from back up.

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

Firefox won't start after an update. Firefox help says check virtualization settings. What is virtualization settings and where do you check them and for what? I have Windows XP

Firefox won't start after downloading update. I've reinstalled Firefox, still won't start. Help says check virtualization settings. What and where are virtualization settings? I have Windows XP.

This might be Zone Alarm since it provides virtualization. Please try the instructions to turn off virtualization in the following support question
http://support.mozilla.com/en-US/questions/880170

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

When i start firefox it takes about 30 sec. and he is stopping the working of my mcafee? it started after i update to the 10 version!

when i start firefox it takes about 30 sec. and he is stopping the working of my mcafee? its started after i update to the 10 version!

Thanks for the feedback. You can also try to inform [https://community.mcafee.com/index.jspa McAfee].
Firefox has a add-ons page to temporarily or permanently disable add-ons for checking: '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''.

Ovi Maps 3 don´t start after firmware update (6220...

Similar Messages

Maybe you are looking for