OVI Maps and bluetooth carkit at the same time

I tried to use OVI Maps on my Nokia 5800.
If my bluetooth carkit is connected, I don't have audible route descriptions. As soon as the carkit is disconnected, I can hear the driving instructions again.
Is it possible to use navigation using OVI Maps and a bluetooth carkit at the same time?
Erik

@ErikdePotter
Welcome to the forum!
This was possible if you used Nokia CK-300 carkit (now discontinued) which had dedicated CarMenu application installed upon device:http://europe.nokia.com/support/product-support/nokia-ck-300/application-software as option to route "All audio events" via car speakers!
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

TS3018 earbuds and bluetooth speakers at the same time?

Can IPod Touch be used with earbuds and bluetooth speakers at the same time?

No. You can only select which output device you want.

Can iPad3 connect to Apple TV via Airplay, and Bluetooth speaker at the same time?

I'm making a best man speech using Keynote at a wedding tomorrow, for which I need audio as well as video. The Apple TV is connected via HDMi to the projector, and I can control the presentation wirelessly from my iPad. So far so good. There is a Bluetooth-enabled speaker which my iPad can connect to via Bluetooth, but then it loses the Airplay connnection to the Apple TV. Is there a work around? I guess if I had an Airplay-enabled speaker and not a Bluetooth enabled one, I'd be OK, but I don't have time to go buy one now.
It appears my only option if I want to use the speaker (which I do), is to use my MacbookPro instead and connect via HDMI straight into the projector and bypass the Apple TV altogether. Which means I'm stuck standing by the macbook pressing SPACE BAR every time I want to change slides, as opposed to using the iPad wirelessly which lets face it would look far cooler!

Pretty sure you can't route the audio via bluetooth and the headphone jack.

Can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0

can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0 or Iphone 4s or Ipad 2?

You can only connect to one device at a time using Bluetooth, See article below for more information.
http://support.apple.com/kb/ht1664
While your iOS device can maintain multiple pairing records, it can only connect to one headset or hands-free device at a time. This prevents your iOS device from sending your data to the wrong Bluetooth accessory.

I would like to connect both my iphone and ipod to my bluetooth headphones at the same time. Is there anything that I can buy to accomplish this

I am trying to connect both my ipod touch 5h gen and also my iphone 5c to my bluetooth headphones at the same time. I have been told because of the way the operating system works this is not possible. I used to be able to do this on my old non apple handset.
The reason I would like to do this is because when I am listening to my ipod and have my phone in my pocket it is not connected to bluetooth and I am missing important phone calls some of which are business calls.
Is there any type of device that i can get from apple to allow this to work.
Regards
Bodi

The iOS implementation of the Bluetooth Protocol does not permit use of a Bluetooth device with more than one source at a time.

HT1153 Can I sync my Apple Bluetooth keyboard with Mac G5 , iPhone5 and Apple TV at the same time ?

Can I sync my Apple Bluetooth keyboard with Mac G5 , iPhone5 and Apple TV at the same time ?

Thank's for the help, my only choice is to buy 2 more keyboards .
Too bad that there is no memory to recall different channels of Bluetooth.

Bluetooth keyboard K810 and mouse T630 at the same time, repeating keys and mouse starts to stutter

I use a Lenovo Thinkpad Tablet 2, Windows 8.1(core edition), x86 (32bit).
If I pair a Bluetooth keyboard K810 and mouse T630 at the same time, with Wifi On, the keyboard starts repeating the keys and the mouse starts to stutter. Especially if WiFi is under load (when downloading something).
This doesn’t happens if I pair only the keyboard, or if I pair mouse and keyboard with Wifi OFF.
If I pair a Bluetooth keyboard and use a USB mouse with Wifi ON, everything works fine.
If I pair a Bluetooth mouse and use a USB keyboard with Wifi ON, everything works fine.
I think it is an issue with two Bluetooth devices paired at the same time with Wifi ON.
So here is a summary:
BT mouse and BT keyboard / Wifi ON ----> repeating chars and the mouse starts to stutter (bug)
BT mouse and BT keyboard / Wifi OFF ----> works fine
Only BT keyboard / Wifi ON ----> works fine
Only BT mouse / Wifi ON ----> works fine
USB mouse and BT keyboard / Wifi ON ----> works fine
USB keyboard and BT mouse / Wifi ON ----> works fine
Where is the problem? Is there any solution?
Solved!
Go to Solution.

I have solved the problem. In the Wlan-Drives-Settings there is the "Bluetooth Collaboration" option. I put the value to "Disable" and now works everything like charm.
Best regards, jC
Broadcom manual:
Bluetooth Collaboration
Bluetooth Collaboration enables general purpose input/output transmit suppression protocol between the IEEE 802.11 media access control (MAC) and an external Bluetooth chip to minimize transmit interference. Bluetooth Collaboration is enabled by default.

Can you use 2 bluetooth headphones at the same time with ipad?

I'd like to purchase 2 bluetooth headsets for my elderly parents to use with their ipad for FaceTime. They both typically use FaceTime at the same time to talk to their grandkids, but have difficulty hearing just using the ipad speaker. Is it possible to utilize 2 bluetooth headsets at the same time with ipad. If not, what's the best alternative? (Wired headsets will not work as they also are often caring for another young grandchild at the time and can't be tethered)

You can only pair to one BT headset at a time.
As an alternative, have you considered a BT speaker so you can increase the volume of the Facetime call?

When I use a projector via a VGA adapter I can not run my Bluetooth speaker or other Bluetooth devices at the same time. Can anyone help me with this?

I try to find help. I can not run a projector and a Bluetooth device at the same time. Even though my Bluetooth speaker is recognized, and I have changed the settings to this speaker, it wont play any sound. I have got also problems using other Bluetooth devices when I use the projector via a VGA adapter.

I try to find help. I can not run a projector and a Bluetooth device at the same time. Even though my Bluetooth speaker is recognized, and I have changed the settings to this speaker, it wont play any sound. I have got also problems using other Bluetooth devices when I use the projector via a VGA adapter.

Bash script: Rotate your wallpaper and SLiM theme at the same time

EDIT;
I've decided I should really thank Cerebral for his help with writing this script; this thank you should have been here from the get go.
After writing:
#!/usr/bin
echo "Hello World!"
I wrote a script to rotate my fluxbox background and SLiM theme at the same time, so I could have a contiuously changing background and still have a smooth transition from SLiM to fluxbox. (It just looks so much cooler when both have matching backgrounds). By the time you finish reading it, and configuring your box so it will work, you will probably have decided you could have writtin your own, better script to do the same thing. But, on the off chance anybody finds use for it, here it is:
(this should be obvious, but: don't run this script without at least reading the comments)
#!/bin/bash
#this is a script to rotate a number of backgrounds
#to be shared by the fluxbox desktop and SLiM login manager.
#it is the first meaningful script I've written. It may be
#freely distributed and used with the understanding that you are
#using it at your own risk.
#Before running this script you need to check that your SLiM
#themes are installed to the path /usr/share/slim/themes, which
#is the defulat path for installation in Arch. Here are some
#other things you need to set up:
#1. create (if you don't have it) the directory /usr/share/wallpapers
#2. create a wallpaper in /usr/share/wallpapers called 'dummy' by copying
#you current wallpaper to that filename
#3. set your window manager to display the wallpaper 'dummy', this works fine
#using a style overlay in fluxbox, I haven't tested it with any other window
#manager, but I don't see why this would cause a problem.
#4. create a directory /usr/share/slim/themes/current, you can copy one of
#your slim themes into that directory if you want. (this will prevent you
#from seeing some error messages the first time you run the script)
#5. define the names of the themes you want to rotate, in order for this
#script to work, you must name them "themeNUMBER", where NUMBER is replaced
#by an integer. Your themes must be numbered consecutively, start with 1
# that is:
#theme1 , theme2, theme3, etc. , theme305
#If you don't number consecutively, this script will not run properly. You
#must also define the total number of themes as "rotate_number"
#6. Check if the script runs, if it does, you should change /etc/slim.conf to
#use the theme "current"
#7. This theme will now rotate your SLiM theme and wallpaper in such a way as
#to make them match each other. Note that SLiM will not let you change themes
#"on the fly", (as of July 6, 2008), so changes will not be apparent unless you
#restart SLiM. I run the script before I run slim in my etc/rc.local local
#script, so each time I reboot I get different wallpaper / login background.
#Fred Drueck 2008
#Define here all themes to be rotated and the total number of
#themes to rotate:
rotate_number=9
theme1=/usr/share/slim/themes/default
theme2=/usr/share/slim/themes/lake
theme3=/usr/share/slim/themes/lunar
theme4=/usr/share/slim/themes/flower2
theme5=/usr/share/slim/themes/the-light
theme6=/usr/share/slim/themes/mindlock
theme7=/usr/share/slim/themes/parallel-dimensions
theme8=/usr/share/slim/themes/wave
theme9=/usr/share/slim/themes/fingerprint
#check you are running this script as super-user:
if [ $(id -u) != "0" ]; then
echo "You must be the superuser to run this script" >&2
exit 1
fi
echo "rotating themes"
#figure out which theme is currently set, then name it as the variable
#"last theme number", otherwise set last theme number as 0
if [ -f /usr/share/slim/themes/current/current_theme_number ]
then
echo "checking current theme"
cd /usr/share/slim/themes/current/
eval last_theme_number=$(cat /usr/share/slim/themes/current/current_theme_number)
echo $last_theme_number
else
echo "no theme is currently set, using theme 1"
last_theme_number=0
echo $1 > /usr/share/slim/themes/current/current_theme_number
fi
#set the new theme number
eval new_theme_number=$(($(($last_theme_number % $rotate_number))+1))
#select the new theme
placeholder=theme
eval new_theme=\$$placeholder$new_theme_number
echo $new_theme
#now clean out the "current" theme where I keep the current
#theme for slim
rm /usr/share/slim/themes/current/background*
rm /usr/share/slim/themes/current/panel*
rm /usr/share/slim/themes/current/slim.theme
#the wildcards are there since the themes use jpg and png files
cp $new_theme/background* /usr/share/slim/themes/current
cp $new_theme/panel* /usr/share/slim/themes/current
cp $new_theme/slim.theme /usr/share/slim/themes/current
#increase the theme number, but first clear the old file
rm /usr/share/slim/themes/current/current_theme_number
echo $new_theme_number > /usr/share/slim/themes/current/current_theme_number
#copy over the dummy wallpaper in "/usr/share/wallpapers" (with the theme
#background file
cp $new_theme/background* /usr/share/wallpapers/dummy
exit 0
Last edited by pseudonomous (2008-07-07 21:59:42)

oh i forgot to mention... its rotating while moving. i.e. is doesn't have to stop rotate and then continue back to origin.

How do I make Organizer and Editor open at the same time?

I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
Thanks,
K

Create Desktop shortcuts for the Organizer and the Editor:
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Ken

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

How do I do a split screen to show the contents of my Library and a playlist at the same time?

I’m using iTunes 11.3.1 on a current generation Mac running OSX 10.9.4.
I like to manually create playlists. I want to be able to see the contents of a playlist and my library at the same time. Is there a way to do a split screen view in iTunes so the songs in my playlist show in one window and the library shows in another?

See this thread -> https://discussions.apple.com/thread/5666364

IS there a way to load and purchase different photos from iPhoto and ship them at the same time? the only way that I can find is to purchase each photo (or multiple of one) at a time, which increases the cost of shipping, as I want to get one print of 20

Is there a way to order multiple different prints in any quantity from Iphoto? it appears currently like I would have to ship each separately, even if only one print... is there a way around this so I can can get several DIFFERENT prints of any quantity and ship all at the same time?

Sure - easiest way is to make an album for photos you want to order and drag photos to it - when it is complete open the album, select all and order
LN

HT201263 When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong

When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?

- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

OVI Maps and bluetooth carkit at the same time

Similar Messages

Maybe you are looking for