OVI Maps keeps wanting to download data after upda...

I have the Nokia 5230 which I bought in July. I had also installed the OVI suite on my PC, which I used to download the full map of Malaysia and Singapore. I could happily use the GPS function without having to download large amount of data through the phone, or allow it to go online if I want to search for location. In the case where I wanted to use it offline, zooming in or out at any level allows me to see the roads and place names clearly.
A few days back while using OVI Maps, a popup came up saying a new version is available. I promptly allowed the download, but installation failed saying there "was not enough memory".
I uninstalled apps from my phone, including "Nokia Maps". After clearing up apps and getting about  40MB free memory, was I able to install the new version of OVI maps. I promptly re-downloaded the Malaysian and Singapore Maps through Ovi SUite.
Now I notice OVI Maps now download large chunks of data through my data connection during GPS usage. If I disallow online use, my GPS shows  nothing but a blank "map". If I allow going online for the first time, and not the second time, when using GPS, the same blank appears if I zoom out or zoom in. It's as if the maps are not there, so data connection is required to download them. How can this be when I have already downloaded the Malaysian / Singaporean map to my phone through OVI suite? I have set on my phone and the OVI suite for the data to be saved to my microSD card.
Please help. This is driving me up the wall.

Here's what you can try to do.
1. Back up your phone memory.
2. Update the phone software.
3. Download Ovi Maps in this link : http://maps.nokia.com/services-and-apps/ovi-maps/free-downloads#/nokia-5230/
4. Remove the "qf" and "Cities" folder on your memory card.
5. Install the Maps Application on the newly updated phone.
6. Once the installation is successful, run the Maps on your phone but don't go online. This will re create the two folders that you deleted in the memory card.
7. Open Settings of the maps application then click on maps. Make sure that it will use the maximum allowable size (90%)
8. Download the Maps data again using Ovi Suite.
Every one can correct if I'm wrong. ^_^

Similar Messages

  • Ovi map for other country downloaded and installed...

    I've used the Ovi Suite 2.2.0.245 and connected with N900 but selected PC suite mode instead of Mass storage. I read alot that you have to select Mass storage for N900, but Ovi Suite won't then be connected with my phone, but works with PC suite.
    I wanted to transfer country maps to the phone so I can use it offline. Selected the Map and downloaded and it said transfered to phone...so everything seems good. But when I go to open those maps on the phone...I can't find them anywhere at all! I'm not sure where they are.....I've check the 'ovi map', then the 'cities' folder but nothing. There are other files there but not titled with the cities i've downloaded. I tried to open those files anyways (having a "?" as their icon) and then selected I think 'Application' or something as ways to open the file.....then needed to download but 0kb...??? it then said unable to download, the file could be corrupted. So now..I'm stuck.
    I don't know where the maps were transfered to. Oh and I check on the Ovi suite Map tab and selected my device, and it should alllll the cities and countries listed in my device (phone) already....but I can't find/open them on the phone. Much help and guidance would be appreciated!
    Thanks in advance.
    Solved!
    Go to Solution.

    Thanks for reply. I did check the cities folder and it's not there...I've downloaded New York and cannot find it. Also, the folders I saw were all a few kb and not the appropriate size.
    I went to ovi maps on the n900 and only showed me where I am, I wanted to open new york map but don't know where and how. I clicked on search and entered new york but then ask me to connect to the internet. It did and it worked but then that means I have to connect.
    It said I can be offline for N900:
    http://www.nokia.com.au/get-support-and-software/download-software/maps-support/how-to/maps-for-n900
    I thought it can be veiwed offline, so how can I? I wanted to open the map when overseas but if there's no internet connection and I have transfered the map on the phone previously, I won't be able? =(

  • Data lost when download data after ALV display in background

    Hi, everyone, first i display the data in ALV Grid, then I upload the data into sap application sever, it is ok in foreground. But when i run the program at background and the data is more then one page in spool list, the file on application server will lost and only has data in last page of spool list. Is this SAP standard behavior? please advice, thanks.

    There is a simple logic.
    First i get all data and keep the data in interal table T_LIST.
    Then call function REUSE_ALV_GRID_DISPLAY to display data in T_LIST.
    Third, Using statement OPEN DATASTET and TRANSFER to upload data in T_LIST into application server.
    In fact, it will be ok if run the program foreground. it will also be ok if upload data into appllication server before display data with ALV grid. But i just want to know the root cause why data lost in my current design. thanks.

  • Ovi Suite does not retreive phone data after conne...

    Dear members,
    Im using Nokia 5230 and i tried connecting my phone with Nokia PC suite and Ovi suite. Im successful with PC suite and Im able to access everything. But in Ovi suite, the mobile is being detected and shows my mobile model in the connected devices but still the phone data are not retrieved. It shows a processing icon below the device name which can be seen from the file I have attached here and it does not show any of my phone data i.e. Contacts, messages, photos, etc. I tried the solutions posted in a similar topic ("Ovi Suite + 5230 USB not working")  but I could not find a way. Kindly give me a solution so that I can use Ovi Suite effectively.
    Attachments:
    Nokia Ovi Suite connected to 5230.JPG ‏60 KB

    I am having the same problem--Nokia 5230 to ovi suite 3.00.290, but i do not have PC suite. My OP is WIN 7 32bit on a msi U100 Netbook. When i fired it all up 2 days ago it transfered all my old e-mails to ovi suite but all the e-mails sent yesterday (Saturday-april 23,2011) and today (Sunday april 24,2011) Do not transfer. Also i noticed that on saturday evening (april 23,2011) when i shut down there was 79 UPDATES! that downloaded!--this could be the clown in the wood pile! No sync transfer since then. We need this fixed--Thank You.

  • I am trying to prevent an automatic download starting of Itunes file I purchased and no longer want. Itunes keeps wanting to download them onto a machine which has no space for that much video.

    I purchased several episodes of a TV show. I don't want the HD version. It takes up too much space. So I have the regular version. For the last two years I tunes has been trying to download the HD version. I get so frustrated with this, I barely use Itunes at all.

    Once an item enters your download queue, you can't delete it.  You can let the download complete and then delete the unwanted item. Or, contact the iTunes Store Support Team to have them remove the item from your download queue. Contact the here:  https://expresslane.apple.com/Issues.action

  • How do you keep text box formatting data after saving and closing a PDF? (Acrobat XI)

    I love that Acrobat XI has the feature "Edit Text & Images". It saves me and my company time when modifying PDFs for our clients. Though I am having some formatting woes...
    When I insert a new text box into the document, I can span the entire text box from top to bottom of the page. I can type whatever I want in it and it makes it simple for editing later. Though, when I save the document, close it, and reopen it, all the text that was in one huge text box is broken out into multiple text boxes (per line of text). This makes it a pain to do any edits to the document because the text overlaps and does not wrap (different text boxes over one another). How can I stop this from happening? Is there a way to combine multiple text boxes maybe? What is the best solution to this issue? (running trial version of Acrobat XI on Win7 64-bit)

    Why we have chosen not to use comments is due to the how jumbled they become on a page. We are basically going back and putting detailed annotations/footnotes (with numbered markers) to identify what portion of the page the functionality lives/exist. Comments also sometimes close so you cannot find them very easily...
    I have just figured out with this form text field solution, I can't use underlined text...sigh...
    Update: Figured out the underlined text, CTRL+I

  • N900 OVI map not available to be download..?

    Can I know where to download Nokia N900 OVI map..? Because I search allots of places but I still cannot get the map..Thks..

    Hi
    The way i did it yesterday, to update and install new maps, was to use the Nokia Ovi Suite on my computer, If you dont have this you can download it from a link on the Nokia site,http://www.nokia.co.uk/support/download-software/o​vi-suite
    Then simply open Ovi Suite on your computer, connect your N900 via USB, click on Maps on Ovi Suite, select the maps you want and download them,
    The system first removes any old maps, then downloads to the computer, then transfers to N900, all very simple, but does take some time depending on how many countries you want to download. you can also add additional maps at any time,
    Or you can download from the Ovi site just using your N900 
    Hope this helps, let me know if you require more
    Regards  Peter U/K

  • Keeping orginal creation date after editing a photo

    In Photoshop, Does anyone know how do I keep the shot/creation date after editing/adjusting a photograph in order to keep hundreds of images in a chronological order? I am combining files with a second shooter on an event an the timeline is essential.

    Hmmm you might have a point.  I can see that tag in Bridge, but in Windows 7 Explore, that tag is not turned on by default.  Right clicking a column heading gives you the option of turning on any of about 50 column headings.  When I turned on the 'Date taken' column earlier the EXIF was there and correct.  Looking at some of my edits just now, the Date created tags are OK, but the date taken tags are not showing for the psd and save as files.  The date created tags for the RAW files show the time they card was uploaded to the computer.
    It's not a big deal though.  As the questions are being asked in the Photoshop forum, all anyone has to do is sort them in Bridge (which does retain the Date Taken tag), and Batch rename with a number prefix. 

  • N97 Mini can't get a GPS fix on Ovi Maps but insta...

    Yeh, well I got my N97 Mini yesterday and it instantly fixes on a satellite on Google maps but  when I try Ovi maps or the positioning app (Menu> Apps> Location> GPS Data> Positioning), it doesn't connect at all! I'd really like to be able to use Ovi so what can I do?
    -HR.
    N97 Mini- RM 555- v11.0.045
    Solved!
    Go to Solution.

    Google maps uses the cellphone mast and the internet to determine your position, apart from the GPS on your device.
    On Ovi Maps or Positioning app, have you configured it to have A-GPS activated? Furthermore, Google Maps is fast in getting a "map" because it only downloads maps on the fly, of maps of the area on screen, while Ovi Maps is trying to download the maps for an entire country.
    Go to Menu>Apps>Location>Positioning>Positioning Methods. Make sure you have A-GPS and network based turned on (you can use it turned off if you want, but turning them on will make the initial fix faster). In Positioning Server, make sure that the server address is supl.nokia.com, and the access point is defined.
    The first ever fix from a phone can take anywhere from 5min to 45min, depending on various factors. Also, make sure that you have downloaded the maps for your country into your phone.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Ovi Maps 3.1 ?

    I just used the SW update function on my N97 and it said there was an update for Ovi Maps to 3.1. However, after the installation the version number shows to be 3.01 and the Software update is still offering me an update to 3.1.
    Anyone with the same issue? Is this an actual 3.1 update or just 3.01? I don't want to continue updating and loading my maps all the time 
    Solved!
    Go to Solution.

    LOL it is a bug and it is version 3.01 that updates via software update onyour n97. i have just updated and that is the version i get. there is no more recent version out there.  
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Ovi Maps won't open in Nokia 700

    I bought Nokia 700 2 months ago and I have been using Ovi Maps perfectly until last week, when after plugging my device in to my laptop I got a message that I should update the Maps application. I followed the instructions but there was not enough disc space, so the installation stopped. I unplugged the device and made some space, then plugged the device again and performed the update.
    After that, I can use the navigation application as well as the check-in application normally, but the Maps won't open from the icon. I tried reinstalling software, reinstalling the maps, nothing. I cannot find the Ovi Maps version as the application does not appear in the Application Manager. I open the Maps settings, I can see the maps I have installed, but no info on the version.
    Can anyone help?
    Many thanks!
    Solved!
    Go to Solution.

    OK, I think I solved the problem.
    I had to open Ovi Store and download an update of the Ovi Maps (v3.09). It took some time but it now works fine. I couldn't find this update elsewhere, only through the Ovi store.
    I hope this hels you as well.

  • Download data from ECC6.0 to CRM

    We want to download data from ECC6.0 to CRM 2.0.
    I am facing an error while trying to use Function  module 'SMW_CALL_MIDDLEWARE'
    to create and post BDOCS in CRM 2.0.
    The BDOCs are getting posted successfully. However, function module is updating 
    only SMO* ( Mapping) tables but not the CRM database tables. Does anyone has any suggestion on this.

    I think your corresponding mobile bridge needs to be properly active. That should take care of posting data from CDB to CRM.

  • Ovi Maps 3.03 + E-72 compass problem

    Hi all, 
    Yesterday I installed the new free Ovi Maps and managed to download some maps and voice guidance files onto it as well. Yay for the free new gadget. But somehow my compass doesn't seem to work anymore. Or rather, it stays white and I don't see the map tilt. With the previous version I would just move the phone along all axis for a few seconds and it would turn from white to yellow to green (as described in the manual). Here, nothing happens, no matter how long or how often I turn and twist the thing.
    Is there a different way to do it in the new Ovi Maps? Am I doing something wrong? Is it a bug? If so, am I the only one with it?
    Solved!
    Go to Solution.

    budi_indonesia wrote:
    yeah....but when u try drive mode or walk mode...compass not working animore...its suck...compass just activate when u in ur potitions...when u press 5 but when u move ur position...compass wi not work...
    but my old version woik it nicely...on ovi maps 3.01 after upgrade to ovi maps 3.03 avrithing is suck...
    its real bugs...
     I believe when you're in guided-navigation mode (drive/walk), then the map is automatically oriented towards where you're heading.  I wasn't able to try the voice-guided navigation back in Ovi Maps 3.01 (still have a few days free license pre-included with my E72)

  • How to download data from an internal table to a text

    Hi All,
    I want to download data  from an internal table to a text file.
    The fields should be pipe(|) separated. I have tried GUI_DOWNLOAD but it is not taking the field separator.
    The sample of the desired data that i require should be this way:-
    13456TR|M|COUP|MATERIAL|KGS
    Thanks in advance.
    Regards
    Satish.

    Hi,
    Try this..
    REPORT  zc1download message-id zc1dwnmsg.
    *& Declaration Section for the Tables *
    TABLES: makt.
    *& Declaration Section for the Internal Tables
    DATA: intab TYPE TABLE OF makt,
          wa_intab LIKE LINE OF intab,
          no_of_rec TYPE i,
          count TYPE i.
    DATA: BEGIN OF f_intab,
            str(255) TYPE c,
          END OF f_intab.
    DATA: t_intab LIKE TABLE OF f_intab,
          w_intab LIKE LINE OF t_intab,
          temp(255) TYPE c.
    FIELD-SYMBOLS: <f> TYPE ANY.
    *& Selection ScreenSection for the file download
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: file TYPE rlgrap-filename MEMORY ID file,
                tab RADIOBUTTON GROUP rad1 DEFAULT 'X',
                others RADIOBUTTON GROUP rad1,
                delimit TYPE c.
    SELECTION-SCREEN END OF BLOCK b1.
    START-OF-SELECTION.
      IF file IS INITIAL. " check to ensure file.
        MESSAGE i001.
        EXIT.
      ENDIF.
      IF others = 'X'.    " check to ensure delimiter.
        IF delimit = ' '.
          MESSAGE i002.
          EXIT.
        ENDIF.
      ENDIF.
      SELECT * FROM makt INTO TABLE intab.
      IF tab = 'X'.       " default delimiter tab is used
          CALL FUNCTION 'WS_DOWNLOAD'
          EXPORTING
            filename                = file
            filetype                = 'DAT'
            mode                    = 'A'
          TABLES
            data_tab                = intab
          EXCEPTIONS
            file_open_error         = 1
            file_write_error        = 2
            invalid_filesize        = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            no_authority            = 10
            OTHERS                  = 11.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ELSE.             " If user defind delimiter is to be used
                  Counts the number of fields                *
        DO.
          ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
          IF sy-subrc <> 0.
            EXIT.
          ELSE.
            count = count + 1.
          ENDIF.
        ENDDO.
        LOOP AT intab INTO wa_intab.
          DO count TIMES. " Adding the delimiter in required places
            ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
            CONCATENATE temp delimit <f> INTO temp.
          ENDDO.
          SHIFT temp.
          APPEND temp TO t_intab.
          CLEAR temp.
        ENDLOOP.
        CALL FUNCTION 'WS_DOWNLOAD'
          EXPORTING
            filename                = file
            filetype                = 'ASC'
            mode                    = 'A'
          TABLES
            data_tab                = t_intab
          EXCEPTIONS
            file_open_error         = 1
            file_write_error        = 2
            invalid_filesize        = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            no_authority            = 10
            OTHERS                  = 11.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDIF.
      WRITE:/ 'The Data has been tranfered to :', file.
    Cheers
    Kathir!~

  • Problem download data with trailing blanks using gui_download

    Hi All,
          I am using SAP 4.6C. I have requirement to download data with trailing
    blanks.But i am not succeeded fully to acheive my requirement.I want to
    download data to be in the below format.
    Eg: 'T000000070600000004000000003593593                                               '
    I want to download data with different blanks of each record.
    For example in 1 line 18, 2nd line 25, 3rd line 22.
    I already used Hexa notation value '09'. But it is showing only 7 at once. I have
    added 3 times this field but it is showing 21. How i can i add extra space?
    I tried to move ' ' spaces also. It does't wotk. I have tried concatenate with ' ' and
    separared by ' ' also but no use.
    I have passed all possible parameters to GUI_DOWNLOAD FM.
    say  write_field_separator         = ' '
    write_lf    = 'X'
    trunc_trailing_blanks    = ' '
    trunc_trailing_blanks_eol     = ' '
    Could please tell me some one had faced same problem earlier. It is very urgent.
    Is there is any class attribute in SAP 4.6C?
    ( like cl_abap_char_utilities in 4.7 )
    Thanks in Advance.
    Basha

    Try :
    CONCATENATE  XXXX space RESPECTING BLANKS.
    Of course you must retain these parameters :
    trunc_trailing_blanks = space
    trunc_trailing_blanks_eol = space
    Hope this helps

Maybe you are looking for