Ovi player - my kid has changed the language help!

Hi hoping someone can help with this please! Someone and it is most likely my 4 yr old has changed the language of my ovi player to arabic. Since I'm not fluent I dont know how to change it back.
Pleae can someone tell me the keyboard shortcut or direct me using language like 2nd one down to change it back to english. Thanks so much

Hi, to change the language setting
1) press F4 and you will get the options menu. The language settings is the uppermost field.
2) Open up the language list using the drop down arrow on the left hand side (if you are in Arabic) and you will see the languages listed with their local names.
3) Select English and Select the dark grey button to confirm
4) Confirm the message telling you that Ovi Player will restart (dark grey button) and Ovi player will restart in the correct language
5) If you do not see the store page when Ovi PLayer reopens, select the home button

Similar Messages

Player update 11.5.9.620 has changed the DLL directory for Xtras?

Hi all,
we have created and used a Shockwave Xtra for quite a while now. This Xtra has (on Windows) some dependencies to DLLs which we packaged into the Xtra package file. If you enter a website with Shockwave that requires our Xtra the package is pulled and extracted to the according location of the Shockwave player directory (including the DLLs which are placed just next to the Xtra) and then loaded.
Before the recent player update this was fine and the Xtra could be loaded without any problems (including the DLL dependencies). But since the update the dependant DLLs of the Xtra can't be loaded any more which causes the Xtra to fail. I already did some debugging and found out that the recent Shockwave player seems to have changed the DLL search order (potentially using SetDLLDirectory of the Windows API) which now doesn't include the path to the Xtra itself any more. This results in the fact that the Xtra dependencies can't be located/loaded any more.
Is this issue intended/known and is there a workaround (other than trying to compile everything into the Xtra file itself, which won't work in our case)?
Thank you,
Michael

I saw your post on Direct-L and it seems to me you need to talk to someone in engineering. Try emailing Krishnan <mailto:[email protected]>

I can not open the iPhone seems to be my one of my kids has changed my password What can I do?

I can not open the iPhone seems to be my one of my kids has changed my password What can I do?

You will need to try to restore your iPhone (preferably from the same computer that you most recently synced to).
Read this: http://support.apple.com/kb/ht1212
If you can't do the restore then you will need to try Recovery Mode.
Read this: http://support.apple.com/kb/ht1808
Follow the instructions very carefully.

How can I change the language of the video player?

How can i change the language of the video player?
I imported a dvd but the language is spanish.
i want to have the german language german.
Thanks
Sebastian

When converting the movie from the DVD you need to choose the language that is imported before it is re-encoded.

Hello, how do i change the language of a film on the appel tv, i know i can change it on my pc but not abbel to change it on the apple tv ?

hello, how do i change the language of a film on the appel tv, i know i can change it on my pc but not abbel to change it on the apple tv ?

Unforunately you can't. Its like if you went to a video store there in Netherlands and bought a DVD then got it home and found out it was in Dutch and there is no other audio options. There is no way to magically dub the movie in English. Your iTunes and iPod settings only govern your menus and preference IF alternate options is available already coded into the file, but most movies downloaded from iTunes aren't going to have multiple language audio tracks. If you can't access the U.S. or British store and your kids don't speak Dutch yet, then you will just have to find some other way to get movies for them than iTunes.
The reason for this is legal reasons. In the United States I am only able to purchase videos authorized for sale in the United States. In Britain, you are only able to purchase videos authorized for sale in Britain. Same with Netherlands. Now, with DVDs you could get a regionless DVD player and order your DVDs from Britain or America to get English versions, but you can't do that with iTunes... No British address, no British store access. No British store access, no movies in English.
Sorry.
EDIT: OK I have what i HOPE is good news for you.. I double checked my movies and found out that they do in fact have two audio tracks! In my case, both are English, one being Stereo and one being Surround Stereo though SO, when you open the movie, you should see a little chat bubble on the right side of the little popup menu at the bottom of the screen when you move your mouse. Click that, and there MAY be more audio options there... If there isn't, then you really are out of luck.
Message was edited by: AbsolutGrndZer0

How can I change the language of after effect or creative cloud for a while .. ( I have bought a template which expressions are in english )

hello, I think that this problem has to resolved if it's not yet.. I am on creative cloud in french and all my APPS are in french
I have bought a template for after effect on video hive and its expressions do not work because they are in english..
what can I do ? ,
except changing the language and if it's the only solution How can I do that ? just for a week .. I don't want to keep an english version
thanks
JC

running After Effects in English, even if you’ve installed and activated it in another language

How to change the language used for Aperture?

I'm new to Aperture, I'm a Photoshop Elements 6.0 user, however I found that Aperture has some things that I like better than Photoshop.
Now I downloaded the test version in order to check if its worth it, therefore I downloaded from the Apple homepage in the US, becuase I want to have it in English, I even select English to read the terms of use, but at the end the program is installed in German, languaege in wich I have my iMac.
Do you know How could I do it in order to change the language and been able to use Aperture in English?

Thank you so much, like that will make my life so easy and I'll be able to understand Aperture, due to the translation of the words is not always the same sometimes another word is used and then you just need to search for it.

My friend changed the language in my apple setting and took english off... i can no longer inputmy password due to it having an accent. What should i do and how should i do it ? all help is appreciated

My friend changed the language on my phone.... i can no longer input my password due to him taking of the english language, it is currently in the chinese language and my password has accents in it so i cant access my phone, i dont mind re-storing my phone if required... \whatshout i do and how do i do it ? help is appreciated !

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

I set my passcode in arabic then I changed the language to English, when I wanted to open my ipad later there was no arabic letters to enter my arabic passcode..and I am not able to use my Ipad again please let me know what to do

I set my passcode in Arabic then I changed the language to English, when I wanted to open my ipad later there was no Arabic letters to enter my Arabic passcode..and I am not able to use my Ipad again please advice me what to do

Hello Shaholeh87,
Do you see a Globe icon on left hand side of your Spacebar if yes try pressing that and see if you get an option of changing the keboard language (this will work if you have Multiple language set on your iPhone from Settings>General>Keyboard>International Keyboards and added a keyboard in Arabic Language before )
Or you can get your iPhone in Recovery Mode and Restore it to Factory settings but you will lose all your current Data that you have on your iPhone.
To Restore your iPhone by taking it in Recovery Mode you can follow the below steps :
Follow the process mentioned below step by step to get your iPod Touch/iPhone/iPad working.
Make sure you have Latest Version of iTunes (11.1.3) Downloaded and Installed on your Computer, if not then you can download the latest version of iTunes from the Link below.
http://www.apple.com/itunes/download/
Now once you have the Updated version of iTunes installed on your computer follow the below steps to get your iPod Touch/iPhone/iPad in Recovery Mode and Then restore it to factory settings
Open iTunes Application on your computer and then start the process step by step
1>Disconnect your device from the computer (if connected). The process won’t work if you start with the iPod Touch/iPhone/iPad connected to the computer. Leave the cable connected to the iPod Touch/iPhone/iPad, as you will be reconnecting the iPod Touch/iPhone/iPad to the Computer later in the process.
2>Power down your device. Turn off your device by holding down the Power button ( On Top right corner of iPod). When the power slider appears, slide it to the right. Wait for your device to comepletely shut down before continuing.
3>Press and hold the Home button (Home Button is located at bottom of your iPod Touch/iPhone/iPad screen/display). With the Home button held connect the device to your computer with the USB cable. When reconnected, your device should turn on.
(If the low battery screen appears, charge your device for a few minutes and try the process again.)
4>Continue holding the Home button. After a few moments, you will see the "Connect to iTunes" screen on your device. This screen is a picture of an arrow pointing from a USB cable to the iTunes logo. When you see the screen you can release the Home button.
5>iTunes will display a message stating that a device in recovery mode has been connected. From there you can proceed to restore your iOS device. Once you see this message click on OK and then click on Restore
Once you click on Restore iTunes will download the Latest available version of iPod Touch/iPhone/iPad software (ipsw file) in your computer and after the download is completed the same will be restored in your iPod Touch/iPhone/iPad. You will see the Download process and Restore process on top of your iTunes screen. Once the restore is completed your iPod Touch/iPhone/iPad will automatically restart and you will see a message that iPod Touch/iPhone/iPad has been Restored and will connect after restart.
Now you will have to follow some steps on your iPod Touch/iPhone/iPad to Customize your Device for First Use.
Hope this process will help you

How can I change the language of a block of text

Hi,
Working in a bilingual environment, I am constantly switching languages as I write e-mail. Using Mail 3.5, if I forget to change the dictionary language before I start writing, Mail logically marks most words as spelled incorrectly. After having written a paragraph, I'd like to be able to change dictionary language, and then continue writing.
But Mail doesn't seem to change the language for the text that was already entered -- the words that were "misspelled" according to the old dictionary language are still underlined in red after the new dictionary is chosen, and after I've told it to "Check document now".
How can I get it to re-evaluate the text as now being in the language of the dictionary, so that all those incorrect red underlines will disappear?
Thanks,
Eric Peters

"It's not a bug or a feature; it's just something you can't do..."
Phooey! I accept that Mail is limited to one language at a time. I don't accept that the spell checking fails to work if I switch which dictionary is in use after having already written some text.
"I know of no email client for Mac than can do it, either."
Er, I hate to say it... MS Entourage does do it, perfectly.
I recently gave up Entourage and switched to Mail, because I decided to stick to all Apple software so that syncing would be smoother. The syncing does work much better now that I've eliminated Entourage from the equation...
...but why can't I switch languages and get the dictionary to evaluate the text in the language I've chosen?! Otherwise, can someone explain to me the meaning of allowing the user to select a new language from the popup in the "Show Spelling and Grammar" dialog, if that new language won't then be used for spell-checking, whether for all the text, or the selected text? What is the purpose of allowing use of an interface control which doesn't then do what it obviously is supposed to do? It seems like Apple has broken its own HIG here.
Thanks for listening... maybe someday it will work as it obviously should!
Eric Peters

How do you change the language of the apple tv for netflix

How do you change the language of Netflix in apple tv?

Ok, I figured out whats the problem. I configured Netflix on my smart TV (LG 47LW6500) and gives me the option to choose audio and subtitles. Then configured my preference on the Netflix web page and set default audio to english. And it is actually working with an exception, the default audio will be english unless there is an other language that has better audio, for example, if the movie has 3 languages English (Stereo), Spanish (Stereo) and Portuguese (Stereo) english will be default, but if the theres a case were 1 of the languages is not stereo but better, as 5.1 Dolby, the better audio will be automatically selected as default, for example if English (Stereo), Spanish (Stereo) and Portuguese (5.1 Dolby), then the movie will play in Portuguese, no matter what your default preference is.
There is no way to fix this, because the ATV does not give the option to change the audio language on Netflix (It does on iTunes), and and Netflix App is omitting the web page preferences and the ATV preferences. Basically is and App problem, I don't know who developed the App, but the problem is definitely the app, that has not implemented all of the options the API allows.

How to change the language of administrator system message in outlook

I wonder where is the option which changes the language of the text
related
to : Your mailbox is over its size limit send by the system
administrator ?
Some mailboxes get this message in French and other in
English ?
Is anyone can help me ?
I work with French Outlook 2003 sp2 and
English Exchange server 2000 sp3
I try to change the regional setting on the
server but nothing has changed.
Thanks,

Hi,
Please refer to this duplicate thread below:
http://social.technet.microsoft.com/Forums/en-US/5afe1e1a-82a9-445f-bcce-a76173ceb6bb/how-to-change-the-language-of-administrator-system-message-in-outlook?forum=outlook
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Firefox 4 -- just downloaded and menu & top bars are in some strange language - not english. I can't seem to get to a tools menu to change the language because I can't read the top menu.

Just downloaded Firefox4 and can't read the top line menu because it's in some strange language with symbols instead of letters. How do I get it to display English in the top line menu?
If I could read the menu, I'd go to tools and see if there were an option to change the menu language, but since I can't read the menu choices, I'd only be pushing meaningless buttons.
[email protected]

Thanks. I tried it and get the attached screen. I don't see anything which lets me change the language in the menu.
Before I give up completely & just stick with Chrome or IE, I'll bring my laptop which has a correctly configured version of firefox 4 side by side with my desktop & use it as a template for clicking on the correct gibberish lines. I still don't see an option for changing menu bar language, but I'll search around a bit.
It would help if I could get phone contact with someone at Mozilla, but they don't seem to list a phone number on their help page ----
Alan Taplow
844 John Fowler Road
Plainfield VT 05667
802-454-4675 Cell: 813-230-3940 [email protected]

I Am from Brazil And I Would Like to know if I buy iPad In Hong Kong or In Japan if The Store can Change The language to Brazilian language thats Brazil portuguese. Is That possible??? Where I can get The best price In Hong Kong or In Japan? Than If I but

I Am from Brazil And I Would Like to know if I buy iPad In Hong Kong or In Japan if The Store can Change The language to Brazilian language thats Brazil portuguese. Is That possible???
Where I can get The best price In Hong Kong or In Japan?
Than If I but In one of These countries Do I have The waranty In Brazil?
Which is The newest iPad model The big one With 128 GB? I dont Like The Mini.
Do I buy iPad With Wifi And celular also? It Will be Work In Brazil?
Please I Need a help.
iPad 2 is The newest one or does has another newest one?

Robertafromsp wrote:
Which iPad is The newest do you know?
I am puzzled why you could not find that info yourself on the web in a second or two:
http://en.wikipedia.org/wiki/IPad#Model_comparison

Change the language of PS

I don't know what I did but PS has downloaded in French. Is there any way I can change the language once it's installed?

Adjust the install language | CCM
Regards,
Pfaffenbichler

Ovi player - my kid has changed the language help!

Similar Messages

Maybe you are looking for