Ovi Social uploading images not working

Hello,
I am signed into FB and Twitter on Ovi Socialand can read updates. I am unable to post updates. It just shows updating status and a moving bar.
As well, when i go to images and try to share them, it says uploading started, but it never uploads. there is no error.
rebooting makes no difference.
suggestions?
thanks
Nokia 3395
Nokia 6600
Nokia N95 8GB
Nokia N8 (Anna)
Nokia Lumia 930

The certification system was an effective way of ensuring that virus's and other nastys never made it into official apps,
However it's not a certificate issue in the swype case,
Rather
Swype 2 was released as a beta through betalabs,
it was intended to follow up with a prime release and further development, but this plan was shelved after the burning platform memo and Nokia killing Symbyan, with swype going on to develop for android
Late november 2012 (around a year after release) the original beta stopped working because like most beta's it contained a drop dead date, normally wouldn't have been an issue becasue it would have been superceded by a prime release or another beta,
Swype were good enough to release the same beta with a new drop dead date,but for some reason rather than choosing 2099 or some date infinatly in the future, they chose dec 31 2013
There's a thread on dailymobile that details the issue and a hack fix that resolved the issue
Today there is a discussion on all about symbyan that links to this thread and the fix, as well as another possible fix,
unfortunatly both fixes require rooted phones and cannot be discussed further here
The oficial options of gettng this working again involve petitioning the developer, worked last time, but can't see it this, especially now that beta labs itself is all but defunct, site http://forum.swype.com/
You can also try setting the date on your handset to 2013 and see if that helps

Similar Messages

Uploading Images - Not Working?

My company updated to the Dreamweaver CC version and I’m having trouble getting the images to upload. The text and hyperlinks come through, but no new photos. We are using Dell PCs, Windows 7, and a 64-bit OS.
Examples:
http://www.pookandpook.com/categories/moderndesign.php (should be the fourth photo down in the second column - Italian Lucite and Leather Living Room Suite $2,460)
http://www.pookandpook.com/categories/jewelry.php (Half way down below the green jade brooch – photo for Diamond 14K White Gold Ring $5,904)
I’m not getting an option to “Check Out” the pages like I used to with the old version of Dreamweaver we were using. The text is there, but it is grayed out and not "clickable." When I select “Get”, it runs through some things, but nothing opens. When I double-click it finally opens. But when I save, nothing is saving to the local view.
I’m just totally confused that the text is coming up, but not photos. Any thoughts on what I am doing wrong? I don’t know much about Dreamweaver… I just basically add photos, text, and links to existing pages.
Someone told me my image folder may be located in the wrong place, but I don't know where the right place is?

Something isn't quite right with the image paths on those few images. When I view the page most work and point to ../pookSite. On the ones that are not working they are showing a path 4 levels deeper ../../../../ . If you update those paths on the page the problem should be resolved.

After Hard Reset My Social Network is not working....

Due to Some problem I did Hard Reset to my C7 but now My Social network is not working.
I had reinstall the nokia software but still its not working properly.
In the Social network all the graphics are coming like picture with a cross.

Something is wrong because a hard reset will never leave the TC with green LED.
What version TC.. what firmware??
What OS on the computer?

C7 Social Network does not work!

My nokia C7 social network does not work.
After log in my nokia account,it does not appear facebook&Twitter.it just empty
How to solve it?

Did you try reinstalling Nokia Social? Which version is installed in your phone? Try the latest one http://betalabs.nokia.com/apps/nokia-social-1-3?req=true
If you want to thank someone, just click on the blue star at the bottom of their post

RH 8 Shed images not working

1. Shed images not working as of Nov. 12 2009

Hi all
Thanks for all the info - but I'm still stumped. I have tried generating my .chm
files to the default SSL folders, manually copying all the child chms to the SSL
folder for the master project, letting RH copy them, generating all chms to an
external folder... no matter what I do, every time I recompile the master
project it picks up random old stuff. I have checked and rechecked that my
merged TOC items are to the latest child chms...
Sometimes when I recomplie the master project, even the content in that reverts
back to a previous version, sometimes it doesn't...
I have looked at the Merged Files list in the hhp file, I have deleted this file
and started my merge from scratch, I have manually deleted some paths (some
paths are to directories on the server where any files for this project have
long since been deleted...) directly in this file, but again every time I
recompile the master project it picks up random old versions of the child chms (
and the huge list of old merged files are put back in the hhp file. Even when I
delete all chms from all locations in the folder I'm working in on my C drive,
delete all the merged TOC items from the master project, save it, and
recompile it, the list of old merged files reappears in the hhp file).
Any more thoughts gratefully received:-)
Also - I don't have a Baggage Files folder??
One more thing... If I delete ALL the files under Merged Files in the hhp file using HTML Help Workshop, it crashes

File upload is not working

Hi
The file upload (any kind static/image etc) is not working.
It is giving error "No Data found". This happens only on certain PCs, on other PCs, it works fine.
Have any one experience such issue ? I am not sure how to trouble shoot this, as there are no errors in Apache logs and no record created in wwv_flow_file_objects$.
TIA
DineshS

How does your PL/SQL for the saving of uploaded files looks like? Where does this error happen? Does your process have an error message?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Uploaded image not shown

hello experts,
I have been done a web java application in struts. Its working fine in my pc, where i have netbeans 6.0 IDE. But when i deployed the war file at client pc, where jdk1.5 and tomcat 5.5.9 are installed, its not showing newly uploaded image but it shows all the images which were present while creating war file from my pc. But the image is uploaded. I upload the images into c:\rh\web\photo and c:\rh\build\web\photo ( unless i place here, i can't able see the newly uploaded image without stopping and running the application). I feel the only difference between client Pc and my Pc is, I run my application using netbeans whereas client pc doesn't have netbeans(rest all it has), through tomcat it runs there.
Any help will be greatly appreciated.
Thanks,
SRI.

You know that HTML runs at the client side?
You know that file system paths are not the same as URL's?
You know that file system paths points to the file system of the local machine?
If you have for example a <img src="c:/foo/bar.gif" /> in your HTML, which is been sent from the server to the client side, the web browser will try to search for "c:/foo/bar.gif" in the local file system. This is obviously not going to work when the image is actually located at the server's file system.
You need to replace file system paths by URL's, so that the client can retrieve the image from the server. When the image is not available in public domain, then create a servlet which accesses the server's file system and sends the desired image to the response. Finally let the URL of the image point to that servlet, along with some unique ID or filename. You may find this example useful: [http://balusc.blogspot.com/2007/04/imageservlet.html].

Jquery Loading Image not working at Page Load

Hi,
I developed a page using Jquery, want to load an image at the page load. I am using .show() and .hide() functions, but it is not working. I am using "async;false" in all my SPServices. Can i load the image without setting "async: true"?
shanthan

Hi,
According to your post, my understanding is that you had an issue about the JQuery loading image.
I think the issue is related to the browser. Did you use the IE 8?
The hide() and show() method not work in IE 8.
http://social.technet.microsoft.com/Forums/en-US/a8e17024-bea3-4cb7-8283-bcbcf8955e18/jquery-loading-image-issue?forum=sharepointgeneralprevious
http://stackoverflow.com/questions/21876416/show-hide-not-working-in-ie8-jquery
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Tab image not works in 3.2.0

dear firends hi !
I edited tab with image attribute as myimage.gif (without prefix)
but it not works
(I uploaded an image myimage.gif in shared components)
any iadea?
regrads
siyavuş
Edited by: sak on Feb 20, 2010 1:54 AM

Hello Art,
I am sorry for my late response. I have been knocked out by the flu ...
You are writing about ECC 6.0. Thus you are using an integrated ITS 7.00 that uses mostly the same sources for HTML Business and Javascript for both the IE and the Mozilla Firefox. I was asking about the ITS because there could be some kind of issue in older versions (ITS 6.20 or ITS 6.40). But we worked out a solution for popups in ITS 7.00. So I wonder about your problems. More than that when you write that in IE the popups come up just fine.
I am working really often with Firefox (on Windows, Linux and MacOS X) but can not reproduce the issue. The popups come up fine in any case.
Are the popup blockers disabled?
What about additional software (anti-phishing, anti virus ...)?
Please open the Javascript Console (in menu Extras) before opening a popup. You should try to open the System Status in "Menu/System/Status ...". What error messages come up when the popup should come up?
Please open System/Status ... (in IE) and look for the Component Information. What is listed here (support package, kernel version)?
When you look at the HTML document's source code ([Ctrl]- right click on dynpro area, select "Current Frame"/"View source code of frame" (or similar)), do you see the lines
<iframe class="WebguiPopupWindow"
at the end of the document?
For Mozilla Firefox there is an extension called "Live HTTP Headers" that can help to evaluate the HTTP communication between browser and server. With this plugin we can check if the server returns with an error.
With best regards,
TJ
Message was edited by:
Thorsten Domsalla

Rollovers and swap images not working

since i've upgraded to Dreamweaver CS3 i've not been able to create rollovers.. i need to now
is there a bug? a patch that i need? what is going on? I need help please - been able to make do with flash buttons & text until this job.
Running Mac OS10 - if it helps.. these pages were originally designed in go-live and redesigned since - / i wonder if i'm holding my tongue in the correct position. be gentle with your answers - i'm a graphic designer not a web guru

here is the code to three of the rollovers.. it's tabs
i even thought that if i went ahead and uploaded it might work online.. no such luck
<td height="38" colspan="2" align="center" valign="middle"><spacer type="block" width="1" height="379">
                  <spacer type="block" width="1" height="1">
                  <a href="index.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('home','','images/tabs/rimtymehomeover.jpg',1)"><img src="images/tabs/rimtymehome.jpg" alt="Home Page" name="home" width="154" height="38" border="0"></a></td>
            </tr>
            <tr height="38">
              <td height="38" colspan="2" align="center" valign="middle"><a href="malone.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('aboutus','','images/tabs/rimtyme_about_over.jpg',1)"><img src="images/tabs/rimtyme_about.jpg" alt="About us page" name="aboutus" width="154" height="38" border="0"></a></td>
            </tr>
            <tr height="38">
              <td height="38" colspan="2" align="center" valign="middle"><a href="storephotos.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('storegallery','','images/tabs/rimtyme_storephotos.jpg',1)"><im g src="images/tabs/rimtyme_storephotos_over.jpg" alt="Click here for images of each of our locations!" name="storegallery" width="154" height="38" border="0"></a></td>
            </tr>
            <tr height="38">
              <td height="38" colspan="2" align="center" valign="middle"><a href="credit.html"><img src="images/tabs/rimtyme_getstarted.jpg" alt="GETTING STARTED" width="154" height="38" border="0"></a></td>
            </tr>
            <tr height="38">

Captcha image not working

Here is the link to my contact form page: http://www.healthquestpt.com/hpc/contact.html The captcha image isnt working and the form doesnt work. This image is in the directory "scripts/images"
These are the options I've tried so far:
<?php $random = rand(0,3); ?>
<img src="images/img_<?php echo $random; ?>.jpg"/><br />
<input type="hidden" name="captcha_code" value="<?php echo $random; ?>" />
<?php $random = rand(0,3); ?>
<img src="scripts/images/img_<?php echo $random; ?>.jpg"/><br />
<input type="hidden" name="captcha_code" value="<?php echo $random; ?>" />
<?php $random = rand(0,3); ?>
<img src="/scripts/images/img_<?php echo $random; ?>.jpg"/><br />
<input type="hidden" name="captcha_code" value="<?php echo $random; ?>" />
I've tried moving the images from the "scripts/images" to the "images" file in the main directory.
I've tried moving the contact.html into the "scripts" file
I've tried moving the formmailer.php into the main directory.
None of the above work so right now I have the contact.html in the main directory, the formmailer.php & images associated with formmailer in the "scripts" file and another set of the images in the "images" file in the main directory.
here is the link to the "scripts" folder: http://www.healthquestpt.com/hpc/scripts/
Please help.

Ok den I did it but I only uploaded the index.html and the contact.html pages
heres the formmail.php code:
<?php
// dB Masters' PHP FormM@iler, Copyright (c) 2007 dB Masters Multimedia
// http://www.dbmasters.net/
// FormMailer comes with ABSOLUTELY NO WARRANTY
// Licensed under the AGPL
// See license.txt and readme.txt for details
// General Variables
$check_referrer="no";
$referring_domains="http://domain.com/,http://www.domain.com/,http://subdomain.domain.com/";
// options to use if hidden field "config" has a value of 0
// recipient info
$charset[0]="UTF-8";
$tomail[0]="[email protected]";
$cc_tomail[0]="";
$bcc_tomail[0]="";
// Mail contents config
$subject[0]="Home Physician Care Inquiry";
$reply_to_field[0]="Email";
$reply_to_name[0]="Name";
$required_fields[0]="Name,Phone,Email,Comments";
$required_email_fields[0]="Email";
$attachment_fields[0]="";
$return_ip[0]="yes";
$mail_intro[0]="The following inquiry has been made:";
$mail_fields[0]="Name,Address,City,State,Zip,Phone,Email,Comments";
$mail_type[0]="text";
$mail_priority[0]="1";
$allow_html[0]="no";
// Send back to sender config
$send_copy[0]="no";
$copy_format[0]="vert_table";
$copy_fields[0]="Name,Comments";
$copy_attachment_fields[0]="";
$copy_subject[0]="Subject of Copy Email";
$copy_intro[0]="Thanks for your inquiry, the following message has been delivered.";
$copy_from[0]="[email protected]";
$copy_tomail_field[0]="Email";
// Result options
$header[0]="";
$footer[0]="";
$error_page[0]="";
$thanks_page[0]="thanks.html";
// Default Error and Success Page Variables
$error_page_title[0]="Errors:";
$error_page_text[0]="Please use your browser's back button to return to the form and complete the required fields.";
$thanks_page_title[0]="Message Sent";
$thanks_page_text[0]="Thank you for your inquiry";
// Antispam Options
$empty_field[0]="nospam";
$character_scan[0]="Comments,Name";
$time_delay[0]="2";
$captcha_codes[0]="9C2449,EEADC8,77A585,D72838";
$max_urls[0]="2";
$max_url_fields[0]="Comments";
$flag_spam[0]="";
// options to use if hidden field "config" has a value of 1
// recipient info
$charset[1]="";
$tomail[1]="";
$cc_tomail[1]="";
$bcc_tomail[1]="";
// Mail contents config
$subject[1]="";
$reply_to_field[1]="";
$reply_to_name[1]="";
$required_fields[1]="";
$required_email_fields[1]="";
$attachment_fields[1]="";
$return_ip[1]="";
$mail_intro[1]="";
$mail_fields[1]="";
$mail_type[1]="";
$mail_priority[1]="";
$allow_html[1]="";
// Send back to sender config
$send_copy[1]="";
$copy_format[1]="";
$copy_fields[1]="";
$copy_attachment_fields[1]="";
$copy_subject[1]="";
$copy_intro[1]="";
$copy_from[1]="";
$copy_tomail_field[1]="";
// Result options
$header[1]="";
$footer[1]="";
$error_page[1]="";
$thanks_page[1]="";
// Default Error and Success Page Variables
$error_page_title[1]="";
$error_page_text[1]="";
$thanks_page_title[1]="";
$thanks_page_text[1]="";
// Antispam Options
$empty_field[1]="";
$character_scan[1]="";
$time_delay[1]="";
$captcha_codes[1]="";
$max_urls[1]="";
$max_url_fields[1]="";
$flag_spam[1]="";
// Don't muck around past this line unless you know what you are doing //
ob_start();
$config=$_POST["config"];
$debug=0;
$debug_text="";
// fix for Windows email server security
ini_set("sendmail_from",$tomail[$config]);
// email validation regular expression
$regex = "^[-a-z0-9!#$%&\'*+/=?^_`{|}~]+(\.[-a-z0-9!#$%&\'*+/=?^_`{|}~]+)*@(([a-z0-9]([-a-z0-9]*[a -z0-9]+)?){1,63}\.)+([a-z]([-a-z0-9]*[a-z0-9]+)?){2,63}$";
$header_injection_regex = "(\r|\n)";
if($header[$config]!="")
include($header[$config]);
if($_POST["submit"] || $_POST["Submit"] || $_POST["submit_x"] || $_POST["Submit_x"])
// begin global functions //
// get visitor IP
function getIP()
if(getenv(HTTP_X_FORWARDED_FOR))
   $user_ip=getenv("HTTP_X_FORWARDED_FOR");
else
   $user_ip=getenv("REMOTE_ADDR");
return $user_ip;
// get value of given key
function parseArray($key)
$array_value=$_POST[$key];
$count=1;
extract($array_value);
foreach($array_value as $part_value)
   if($count > 1){$value.=", ";}
   $value.=$part_value;
   $count=$count+1;
return $value;
// stripslashes and autolink url's
function parseValue($value)
$value=preg_replace("/(http:\/\/+.[^\s]+)/i",'<a href="\\1">\\1</a>', $value);
return $value;
// html header if used
function htmlHeader()
$htmlHeader="<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\">\n<html>\n<head><meta http-equiv=\"Content-Type\" content=\"text/html; charset=".$charset[$config]."\"></head>\n<body>\n<table cellpadding=\"2\" cellspacing=\"0\" border=\"0\" width=\"600\">\n";
return $htmlHeader;
// html footer if used
function htmlFooter()
$htmlFooter="</table>\n</body>\n</html>\n";
return $htmlFooter;
// build verticle table format
function buildVertTable($fields, $intro, $to, $send_ip)
$message=htmlHeader();
if($intro != "")
   $message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"2\">".$intro."</td>\n</tr>\n";
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
for($i=0;$i<$run;$i++)
   $cur_key=$fields_check[$i];
   $cur_value=$_POST[$cur_key];
   if(is_array($cur_value))
    $cur_value=parseArray($cur_key);
   $cur_value=parseValue($cur_value);
   if($allow_html[$config]=="no")
    $cur_value=htmlspecialchars(nl2br($cur_value));
   else
    $cur_value=nl2br($cur_value);
   $message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$cur_value."</td>\n</tr>\n";
if($send_ip=="yes" && $to=="recipient")
   $user_ip=getIP();
   $message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$user_ip."</td>\n</tr>\n";
$message.=htmlFooter();
return $message;
// build horizontal table format
function buildHorzTable($fields, $intro, $to, $send_ip)
$message=htmlHeader();
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
if($intro != "")
   $message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"".$run."\">".$intro."</td>\n</tr>\n";
$message.="<tr>\n";
for($i=0;$i<$run;$i++)
   $cur_key=$fields_check[$i];
   $message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n";
if($send_ip=="yes" && $to=="recipient")
   $message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n";
$message.="</tr>\n";
$message.="<tr>\n";
for($i=0;$i<$run;$i++)
   $cur_key=$fields_check[$i];
   $cur_value=$_POST[$cur_key];
   if(is_array($cur_value))
    $cur_value=parseArray($cur_key);
   $cur_value=parseValue($cur_value);
   if($allow_html[$config]=="no")
    $cur_value=htmlspecialchars(nl2br($cur_value));
   else
    $cur_value=nl2br($cur_value);
   $message.="<td align=\"left\" valign=\"top\">".$cur_value."</td>\n";
$message.="</tr>\n";
$message.="<tr>\n";
if($send_ip=="yes" && $to=="recipient")
   $user_ip=getIP();
   $message.="<td align=\"left\" valign=\"top\">".$user_ip."</td>\n";
$message.="</tr>\n";
$message.=htmlFooter();
return $message;
// build plain text format
function buildTextTable($fields, $intro, $to, $send_ip)
$message="";
if($intro != "")
   $message.=$intro."\n\n";
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
for($i=0;$i<$run;$i++)
   $cur_key=$fields_check[$i];
   $cur_value=$_POST[$cur_key];
   if(is_array($cur_value))
    $cur_value=parseArray($cur_key);
   $cur_value=parseValue($cur_value);
   if($allow_html[$config]=="no")
    $cur_value=htmlspecialchars($cur_value);
   else
    $cur_value=$cur_value;
   $message.="".$cur_key.": ".$cur_value."\n";
if($send_ip=="yes" && $to=="recipient")
   $user_ip=getIP();
   $message.="Sender IP: ".$user_ip."\n";
return $message;
// get the proper build fonction
function buildTable($format, $fields, $intro, $to, $send_ip)
if($format=="vert_table")
   $message=buildVertTable($fields, $intro, $to, $send_ip);
else if($format=="horz_table")
   $message=buildHorzTable($fields, $intro, $to, $send_ip);
else
   $message=buildTextTable($fields, $intro, $to, $send_ip);
return $message;
// referrer checking security option
function checkReferer()
if($check_referrer=="yes")
   $ref_check=preg_split('/,/',$referring_domains);
   $ref_run=sizeof($ref_check);
   $referer=$_SERVER['HTTP_REFERER'];
   $domain_chk="no";
   for($i=0;$i<$ref_run;$i++)
    $cur_domain=$ref_check[$i];
    if(stristr($referer,$cur_domain)){$domain_chk="yes";}
else
   $domain_chk="yes";
return $domain_chk;
// checking required fields and email fields
function checkFields($text_fields, $email_fields, $regex)
       $error_message="";
if($debug==1)
   $error_message.="<li>text_fields: ".$text_fields."<br />email_fields: ".$email_fields."<br />reply_to_field: ".$reply_to_field."<br />reply_to_name: ".reply_to_name."</li>";
if($text_fields != "")
   $req_check=preg_split('/,/',$text_fields);
   $req_run=sizeof($req_check);
   for($i=0;$i<$req_run;$i++)
    $cur_field_name=$req_check[$i];
    $cur_field=$_POST[$cur_field_name];
    if($cur_field=="")
     $error_message.="<li>You are missing the <b>".$req_check[$i]."</b> field</li>\n";
if($email_fields != "")
   $email_check=preg_split('/,/',$email_fields);
   $email_run=sizeof($email_check);
   for($i=0;$i<$email_run;$i++)
    $cur_email_name=$email_check[$i];
    $cur_email=$_POST[$cur_email_name];
    if($cur_email=="" || !eregi($regex, $cur_email))
     $error_message.="<li>You are missing the <b>".$email_check[$i]."</b> field or it is not a valid email address.</li>\n";
return $error_message;
// attachment function
function getAttachments($attachment_fields, $message, $content_type, $border)
$att_message="This is a multi-part message in MIME format.\r\n";
$att_message.="--{$border}\r\n";
$att_message.=$content_type."\r\n";
$att_message.="Content-Transfer-Encoding: 7bit\r\n\r\n";
$att_message.=$message."\r\n\r\n";
$att_check=preg_split('/,/',$attachment_fields);
$att_run=sizeof($att_check);
for($i=0;$i<$att_run;$i++)
   $fileatt=$_FILES[$att_check[$i]]['tmp_name'];
   $fileatt_name=$_FILES[$att_check[$i]]['name'];
   $fileatt_type=$_FILES[$att_check[$i]]['type'];
   if (is_uploaded_file($fileatt))
    $file=fopen($fileatt,'rb');
    $data=fread($file,filesize($fileatt));
    fclose($file);
    $data=chunk_split(base64_encode($data));
    $att_message.="--{$border}\n";
    $att_message.="Content-Type: {$fileatt_type}; name=\"{$fileatt_name}\"\r\n";
    $att_message.="Content-Disposition: attachment; filename=\"{$fileatt_name}\"\r\n";
    $att_message.="Content-Transfer-Encoding: base64\r\n\r\n".$data."\r\n\r\n";
$att_message.="--{$border}--\n";
return $att_message;
// function to set content type
function contentType($charset, $format)
if($format=="vert_table")
   $content_type="Content-type: text/html; charset=".$charset."\r\n";
else if($format=="horz_table")
   $content_type="Content-type: text/html; charset=".$charset."\r\n";
else
   $content_type="Content-type: text/plain; charset=".$charset."\r\n";
return $content_type;
// end global functions //
// begin procedural scripting //
// anti-spam empty field check
if($_POST[$empty_field[$config]] != "")
$empty_message = "<li>This submission failed and was flagged as spam.</li>\n";
// anti-spam character scan check
if(strlen($character_scan[$config]) > 0)
$spam_message="";
$field_check=preg_split('/,/',$character_scan[$config]);
$field_run=sizeof($field_check);
for($i=0;$i<$field_run;$i++)
   $cur_field_name=$field_check[$i];
   $cur_field=$_POST[$cur_field_name];
   if(preg_match("/<(.|\n)+?>/", $cur_field) || preg_match("/\[(.|\n)+?\]/", $cur_field))
    $spam_message.="<li>This message contains disallowed characters.</li>\n";
// anti-spam time delay check
if((strlen($time_delay[$config]) > 0 && strlen($_POST["time"]) > 0) || (strlen($time_delay[$config]) > 0 && (strlen($_POST["time"]) == 0 || !$_POST["time"])))
if((time() - $_POST["time"]) < $time_delay[$config])
   $time_message = "<li>This has been stopped by the timer, and is likely spam.</li>\n";
// anti-spam CAPTCHA check
if(strlen($captcha_codes[$config]) > 0)
$captcha_check=preg_split('/,/',$captcha_codes[$config]);
if(strtolower($_POST["captcha_entry"]) != strtolower($captcha_check[$_POST["captcha_code"]]))
   $captcha_message = "<li>CAPTCHA test did not match.</li>\n";
// anti-spam max URL check
if(strlen($max_url_fields[$config]) > 0)
$max_url_message="";
$field_check=preg_split('/,/',$max_url_fields[$config]);
$field_run=sizeof($field_check);
for($i=0;$i<$field_run;$i++)
   $cur_field_name=$field_check[$i];
   $cur_field=$_POST[$cur_field_name];
   preg_match_all("/http:/", $cur_field, $matches);
   if(count($matches[0]) > $max_urls[$config])
    $max_url_message.="<li>This message contains too many URL's.</li>\n";
// set anti-spam flagging option
if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) == 0)
$set_flag = 2;
else if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) > 0)
$set_flag = 1;
else
$set_flag = 0;
// header injection check
    $security_filter="";
if(strlen($_POST[$reply_to_field[$config]]) > 0)
if(eregi($header_injection_regex,$_POST[$reply_to_field[$config]]))
   $security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
else
   $reply_to_field_checked=$_POST[$reply_to_field[$config]];
if(strlen($_POST[$reply_to_name[$config]]) > 0)
if(eregi($header_injection_regex,$_POST[$reply_to_name[$config]]))
   $security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
else
   $reply_to_name_checked=$_POST[$reply_to_name[$config]];
// check domain referrer and continue
$domain_chk=checkReferer();
if($domain_chk=="yes")
$error_message=checkFields($required_fields[$config], $required_email_fields[$config], $regex);
if(strlen($error_message) < 1 && strlen($security_filter) < 1 && $set_flag < 2)
   // build appropriate message format for recipient
   $content_type=contentType($charset[$config], $mail_type[$config]);
   $message=buildTable($mail_type[$config], $mail_fields[$config], $mail_intro[$config], "recipient", $return_ip[$config]);
   // build header data for recipient message
   //$extra="From: ".$_POST[$reply_to_field[$config]]."\r\n";
   $extra="From: ".$reply_to_name_checked." <".$reply_to_field_checked.">\r\n";
   if($cc_tomail[$config]!="")
    $extra.="Cc: ".$cc_tomail[$config]."\r\n";
   if($bcc_tomail[$config]!="")
    $extra.="Bcc: ".$bcc_tomail[$config]."\r\n";
   if($mail_priority[$config]!="")
    $extra.="X-Priority: ".$mail_priority[$config]."\r\n";
   // get attachments if necessary
   if($attachment_fields[$config]!="")
    $semi_rand=md5(time());
    $border="==Multipart_Boundary_x{$semi_rand}x";
    $extra.="MIME-Version: 1.0\r\n";
    $extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
    $message=getAttachments($attachment_fields[$config], $message, $content_type, $border);
   else
    $extra.="MIME-Version: 1.0\r\n".$content_type;
   // send recipient email
   if($debug==1)
    if($set_flag == 1)
     $debug_text.="<p><b>Mail would have sent flagged for spam if not in debug mode.</b></p>";
    else
     $debug_text.="<p><b>Mail would have sent if not in debug mode.</b></p>";
   else if($debug==0)
    if($set_flag == 1)
     $subject = $flag_spam[$config]." ".$subject[$config];
    else
     $subject = $subject[$config];
    mail("".$tomail[$config]."", "".stripslashes($subject)."", "".stripslashes($message)."", "".$extra."");
   // autoresponse email if necessary
   if($send_copy[$config]=="yes")
    // build appropriate message format for autoresponse
    $content_type=contentType($charset[$config], $copy_format[$config]);
    $message=buildTable($copy_format[$config], $copy_fields[$config], $copy_intro[$config], "autoresponder", $return_ip[$config]);
    // build header data for autoresponse
    $copy_tomail=$_POST[$copy_tomail_field[$config]];
    $copy_extra="From: ".$copy_from[$config]."\r\n";
    // get autoresponse attachments if necessary
    if($copy_attachment_fields[$config]!="")
     $semi_rand=md5(time());
     $border="==Multipart_Boundary_x{$semi_rand}x";
     $copy_extra.="MIME-Version: 1.0\r\n";
     $copy_extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
     $message=getAttachments($copy_attachment_fields[$config], $message, $content_type, $border);
    else
     $copy_extra.="MIME-Version: 1.0\r\n".$content_type;
    // send autoresponse email
    if($debug==1)
     if($set_flag == 1)
      $debug_text.="<p><b>Autoresponder would have sent flagged for spam if not in debug mode.</b></p>";
     else
      $debug_text.="<p><b>Autoresponder would have sent if not in debug mode.</b></p>";
    else if($debug==0)
     $send_copy = 1;
     if($copy_tomail=="" || !eregi($regex,$copy_tomail))
      $send_copy = 0;
     if($send_copy == 1)
      if($set_flag == 1)
       $copy_subject = $flag_spam[$config]." ".$copy_subject[$config];
      else
       $copy_subject = $copy_subject[$config];
      mail("$copy_tomail", "".$copy_subject."", "$message", "$copy_extra");
   // showing thanks pages from a successful submission
   if($thanks_page[$config]=="")
    echo "<h3>".$thanks_page_title[$config]."</h3>\n";
    echo "<p>".$thanks_page_text[$config]."</p>\n";
    if(strlen($debug_text) > 0)
     echo "<p><b><i>".$debug_text."</i></b></p>\n";
   else
    header("Location: ".$thanks_page[$config]);
else
   // entering error page options from missing required fields
   if($error_page[$config]=="")
    echo "<h3>".$error_page_title[$config]."</h3>\n";
    echo "<ul>\n";
    echo $security_filter.$empty_message.$error_message.$spam_message.$time_message.$captcha_messa ge.$max_url_message;
    echo "</ul>\n";
    echo "<p>".$error_page_text[$config]."</p>\n";
   else
    header("Location: ".$error_page[$config]);
else
echo "<h3>".$error_page_title[$config]."</h3>\n";
// message if unauthorized domain trigger from referer checking option
echo "<p>Sorry, mailing request came from an unauthorized domain.</p>\n";
// end procedural scripting //
else
echo "<h3>Error</h3>";
echo "<p>No form data has been sent to the script</p>\n";
if($footer[$config]!="")
include($footer[$config]);
ob_end_flush();
?>

Nokia astound C7 Ovi maps "Check in" not working.....

I'm on t-mobile USA and I have been unable to get ovi-map's check in feature, or set up the social networks in the ovi maps. Every OTHER feature of ovie maps works just fine, the GPS, loading terrain data over the 3G network etc... just whenever I try to "Check in" I get "There are currently network problems, Please Try again Later." as an error message.
I've double checked all of my connection settings, and they seem to be fine, ovi social and other apps like opera can connect to the web just fine.
Is there *actually* network trouble that's been going on since June? or is there something wrong with the software / my configuration.
Also, this is kind of un-related, but Google Maps 4.1.1 (also 4.0.0) crash when it initializes the GPS functionality of the phone. I'm fiarly certen these are unrelated, but maybe there is a problem with t-mobile's default settings?

does not work on mobile carriers internet or wlan. I have also made sure internet in maps is on. I am running ovi maps v3.06

N8 social network widget not working

Hi all.
I think I did an update for the N8 not too long ago. And my social facebook widget stopped working. I still have the widget on one of my homescreens, but can't start it. I've looked at my app settings to see if it was still there and i don't think it is... I've looked at nokia.com to try to redownload it, but since it's a pre installed app, it won't let me download it. So I'm stuck now...
Can anyone help me? Thanks a bunch.

Is the application not working or only the widget? Anyway you can download Nokia social v1.3 from Nokia beta labs, you need to login using your Ovi account to download.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Agent (10.2.0.5.0) on OEL is running, upload is not working

Hello,
I am installing boot/stage server for provisioning on Oracle Enterprise Linux, so I need to install Management Agent.
Agent is installed and running. But upload XML files is not working (last successful heartbeat to OMS: unknown).
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.5.0
Protocol Version : 10.2.0.5.0
Agent Home : /home/oracle/OracleHomes/agent10g
Agent binaries : /home/oracle/OracleHomes/agent10g
Agent Process ID : 3141
Parent Process ID : 3122
Agent URL : https://localhost.localdomain:3872/emd/main/
Repository URL : https://xxx.xx.xx:1159/em/upload
Started at : 2009-12-10 11:00:13
Started by user : oracle
Last Reload : 2009-12-10 11:00:13
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 123
Size of XML files pending upload(MB) : 3.37
Available disk space on upload filesystem : 71.78%
Last attempted heartbeat to OMS : 2009-12-10 11:44:05
Last successful heartbeat to OMS : unknown
Agent is Running and Ready
When issuing emctl upload agent receiving error:
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
When trying to secure, everything is fine:
Enter Agent Registration Password Agent successfully restarted... Done. Securing agent... Successful.
When trying to unsecure then getting:
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Checking Agent for HTTP... Done.
Agent successfully stopped... Done.
Unsecuring agent... Started.
OMS Upload URL - http://xxx.xx.xx:4889/em/upload/ is locked or unavailable.
Unsecuring Agent... Failed.
Agent successfully restarted... Done.
when trying to connect with telnet:
Trying 192.168.8.59...
Connected to xxx.xx.xx (192.168.8.59).
Escape character is '^]'.
then issued
^]
and received:
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>501 Method Not Implemented</TITLE>
</HEAD><BODY>
<H1>Method Not Implemented</H1>
^] to /index.html not supported.<P>
Invalid method in request ^]<P>
<HR>
<ADDRESS>Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server Server at xxx.xx.xx Port 4889</ADDRESS>
</BODY></HTML>
Connection closed by foreign host.
And sample of emagent.trc imho regarding this situation:
2009-12-10 11:00:13,661 Thread-1173184 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
Help needed! What should I check? I am very new to Linux, maybe I missed something?
Waiting for any response,
Best regards,
Nikolajus
Edited by: Nikolajus on Dec 10, 2009 6:48 AM

Thanks for answering, Rob
My activity was:
On OMS:
[oracle@gc bin]$ ./emctl secure unlock
Oracle Enterprise Manager 10g Release 5 Grid Control
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
OMS Console is unlocked. HTTP ports too can be used to access console.
Agent Upload is unlocked. Unsecure Agents may upload over HTTP.
Then on boot_test:
./emctl unsecure agent (all completed without errors)
Then:
./emctl secure agent
Securing agent... Successful.
Then back to OMS:
[oracle@gc bin]$ ./emctl secure lock
Oracle Enterprise Manager 10g Release 5 Grid Control
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
OMS Console is locked. Access the console over HTTPS ports.
Agent Upload is locked. Agents must be secure and upload over HTTPS port.
Then on boot_test:
[oracle@boot_test bin]$ ./emctl stop agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Stopping agent ... stopped.
[oracle@boot_test bin]$ ./emctl start agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Starting agent ..... started.
[oracle@boot_test bin]$ ./emctl clearstate agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD clearstate completed successfully
[oracle@boot_test bin]$ ./emctl upload agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
And the status is:
[oracle@boot_test bin]$ ./emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.5.0
Protocol Version : 10.2.0.5.0
Agent Home : /home/oracle/OracleHomes/agent10g
Agent binaries : /home/oracle/OracleHomes/agent10g
Agent Process ID : 29610
Parent Process ID : 29594
Agent URL : https://localhost.localdomain:3872/emd/main/
Repository URL : https://xxx.xx.xx:1159/em/upload
Started at : 2009-12-11 09:42:54
Started by user : oracle
Last Reload : 2009-12-11 09:42:54
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 78
Size of XML files pending upload(MB) : 3.84
Available disk space on upload filesystem : 71.95%
Last attempted heartbeat to OMS : 2009-12-11 09:51:01
Last successful heartbeat to OMS : unknown
Agent is Running and Ready
So, it seems nothing changed. Am I missing something? Waiting for any help!
Best regards,
Nikolajus

Ovi Suite + 5230 USB not working

Preamble:
I recently connected my Nokia 5230 mobile phone to my PC via USB connection and loaded up Ovi Suite (2.2.1.23). Everything worked lovely. But alas! Both an Ovi suite update was available, as well as a update for the phone itself! So I downloaded the latest version of Ovi Suite (3.0.0.284).
Unfortunately, now Ovi Suite does not detect when I select "PC Suite" USB mode (selected on the phone screen). This essentially makes Ovi Suite useless.
So I followed some advice on other discussion pages (more on that later) and reinstalled the Ovi Suite. The problem persisted.
Here are some pictures to help you understand my problem:
http://i.imgur.com/5IknF.jpg
The computer is able detect the phone is connected via USB. I can even browse the contents of the phone memory and memory card. Upon detecting the connected phone, and me pressing 'PC Suite' on the phone screen, it will show this:
http://i.imgur.com/lV0rs.jpg
I cannot progress past this screen. The Ovi Suite simply does not recognise that I've selected that option on the phone.
Defense:
I know what your thinking. "Just another USB thread". Well, I did in fact read plenty of threads on this forum before posting, and have spent the last few hours uninstalling and reinstalling Ovi Suite and drivers in various ways (as suggested in those threads), with no success.
The following is a list of forum threads which I have read and tried all the solutions found in each, and I have copied the solutions (which appear to have worked for other people), for your convenience:
/t5/Nokia-Ovi-Suite/Ovi-Suite-PC-Suite-USB-Connection-Problem/td-p/682828
Solutions which did not work for me:
Could you please follow these steps and check?
1. Disconnect your phone from PC if connected.
2 .Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and PC suite (hopefully) should detect your mobile properly now.
1. Uninstall all nokia related applications like Ovisuite, pc suite, connectivity cable driver,pc connectivity solutions, nokia software updater etc. from ur PC.
2. Restart your PC
3. Now download and install the recent ovisuite from http://www.ovi.com/suite
4. After installation, disconnect/disable your internet connection (this will make sure that the PC use the drivers which comes with ovisuite and prevent the PC from downloading any new drivers from internet) and then connect your mobile and wait for drivers and support software installation.
5. After drivers installation you can connect your mobile to ovisuite from ovisuite screen.
/t5/Nokia-Ovi-Suite/Can-t-connect-to-Nokia-Ovi-Suite-on-Nokia-6700/m-p/757938#M5623
Solution which did not work for me:
Hi GannonC,
Uninstall the following Programs, if any, from Control Panel -> Programs and Features or Add or Remove Programs.
Nokia Connectivity Cable Driver
Nokia Ovi Suite
PC Connectivity Solution
Later download and install the latest OVi Suite from the following location.
http://www.ovi.com/suite
After OVi Suite installation, restart your PC, disconnect your internet from PC and connect your mobile to the PC. This is to prevent the PC searching for a new drivers from internet. OVi suite has all the required drivers for all the nokia phones available in market.
Once all the required drivers are installed automatically, you try connecting the mobile by selecting 'Connect your device' from the bottom left on the OVi suite screen. You should be able to connect your device now.
After connecting you can go ahead and update your maps/ download new country maps.
NOTE: before updating your maps/ download new country maps, you should have used your maps in you mobile atleast once.
Hope this will resolve your issue.
You can connect back your internet anytime after the drivers installation.
/t5/Nokia-Ovi-Suite/OVI-suite-not-reconizing-the-OVI-suite-USB-mode-N8/m-p/809893#M7107
Solution which did not work for me:
Hi,
Please check the suggestions below:
Select Ovi Suite via Tools -> Options -> My device -> Remove this device.
Once you add the device back to Ovi Suite, Select tools -> Add device, reconfigure the Sync -> Option - device sync settings and sync again.
If it does not help:
Go to
Control Panel--> Right click and Programs and Features or add/remove programs "Repair" Nokia Ovi Suite.
Go to
Control Panel--> Programs and Features or add/remove programs - > Right click and "Repair" Nokia Connectivity cable driver & PC Connectivity solution.
If it does not help:
Uninstall the following Programs,from Control Panel -> Programs and Features or Add or Remove Programs.
Nokia Connectivity Cable Driver
Nokia Ovi Suite
PC Connectivity Solution
Later download and install the latest OVi Suite from the Nokia.com/support.
After OVi Suite installation, restart your PC, disconnect your internet from PC and connect your mobile to the PC. This is to prevent the PC searching for a new drivers from internet. OVi suite has all the required drivers for all the nokia phones available in market.
Once all the required drivers are installed automatically, you try connecting the mobile by selecting
'Connect your device' from the bottom left on the OVi suite screen. You should be able to connect your device now.
Br
Mahyav
/t5/Nokia-Ovi-Suite/E5-Ovi-Suite-keeps-telling-me-that-my-device-isn-t-in-PC-suite/m-p/856573#M7752
Solution which did not work for me:
Maarten, I had the same issue and it started after I updated Ovi Suite as well as my device software. I found this in another thread and thought it might help you. I just uninstalled the 3 items and downloaded and installed as prescribed by going to nokia.com/support and downloading and reinstalling Ovi Suite.... Merry Christmas
Re: OVI suite not reconizing the 'OVI suite USB mode 22-Nov-2010 11:36 AM
***** Select Ovi Suite via Tools -> Options -> My device -> Remove this device.
Once you add the device back to Ovi Suite, Select tools -> Add device,
reconfigure the Sync -> Option - device sync settings and sync again.
*****If it does not help:
Go to
Control Panel--> Right click and Programs and Features or add/remove programs
"Repair" Nokia Ovi Suite.
Go to
Control Panel--> Programs and Features or add/remove programs - > Right click
and "Repair" Nokia Connectivity cable driver & PC Connectivity solution.
***** If it does not help:
Uninstall the following Programs,from Control Panel -> Programs and Features or
Add or Remove Programs.
Nokia Connectivity Cable Driver
Nokia Ovi Suite
PC Connectivity Solution
Later download and install the latest OVi Suite from the Nokia.com/support.
After OVi Suite installation, restart your PC, disconnect your internet from PC and
connect your mobile to the PC. This is to prevent the PC searching for a new drivers
from internet. OVi suite has all the required drivers for all the nokia phones available
in market.
Once all the required drivers are installed automatically, you try connecting the mobile
by selecting
'Connect your device' from the bottom left on the OVi suite screen. You should be able
to connect your device now.
/t5/Nokia-Ovi-Suite/not-recognizing-USB-mode-on-E73/m-p/780655#M6383
Solution which did not work for me (simmilar to above):
frauk:
I found this on the Europe forum and it worked for me--finally!
From /t5/Nseries-and-S60-Smartphones/Synchronisation-error-code-8393f010/m-p/734155/highlight/true#M21944...
Click Start
Click Control Panel
Click Programs and Features or Add/remove Programs
Choose Nokia Nokia Cable Connectivity then Change and repair
Do the same for PC Connectivity Solution - Change then repair
Reboot computer
After re-starting the computer, I also followed this portion of a suggestion from another post (don't know if it made a difference or not):
"connected the device, waited till all the drivers were loaded.
Then launched Ovi suite"
(From /t5/Nokia-Ovi-Suite/E52-Sync-Error-8393f010-838c03ee/m-p/740481)
Ovi Suite then recognized my device and the sync appears to have gone smoothly. I hope it works for you too! It's ridiculous that it causes so many problems though--I've wasted many hours on something that should have installed correctly the first time.
Other threads with this problem, which I came across that mention the same problem with various other phones:
/t5/Nokia-Ovi-Suite/5230-won-t-establish-USB-connection-with-Ovi-Suite/td-p/824037
/t5/Nokia-Ovi-Suite/OVI-Suite-2-2-0-245-problem-recognizing-Nokia-device/m-p/719958#M4079
More data:
Now that I have shared a detailed description of my failings with you, here is some information about my phone and the Ovi suite:
Phone information (Keypad: *#0000#):
Software version
V 20.0.005
Software version date
23-03-2010
Custom version
20.0.005.C02.01
Custom version date
23-03-2010
Language set
19
Model
5230
Type
RM-588
Latest update
Not needed (<-- is this another bug Nokia? The phone regularly informs me that a update is available...)
Ovi Suite System information:
Nokia Ovi Suite 3.0.0.284
PC Connectivity Solution 10.50.2.0
Connectivity Cable Driver 7.1.36.0
Nokia Ovi Suite Software Updater 2010.44.0.60888
Maps Service API 4.0.24.1
Nokia mPlatform 2.7.44
Ovi Desktop Sync Engine 1.4.1.42
Operating system:
Microsoft Windows Vista 64-bit Edition, Service Pack 2
Language: English
Detected internet browsers:
- Microsoft Internet Explorer 8.0.6001.18999
- Mozilla Firefox 3.6.13 (Default browser)
Detected Bluetooth stacks:
- Microsoft (Version: 6.0.6000, Build: 16386), In use.
Detected USB drivers:
- Default Hub Driver for USB 6.0.6002.18005
- USB Modem Driver 6.0.6002.18005
- EHCI eUSB Miniport Driver 6.0.6002.18005
Additional information:
Windows Vista Home Premium SP2 64-bit (with all updates installed)
I have no problems with USB or drivers with another components
Zship's revelations:
So this is not really a problem for me. I have the working, older (2.2.1.23) version of Ovi Suite installed on my netbook, and sure enough, it works fine, I just tried it. I wont be updating Ovi Suite on it though. I also could probably just download the update via 3.5G using just the phone itself, but the problem remains that a simple software update has caused a critical connectivity problem between your software and hardware. Given that many Nokia customers would have less technical know-how than say, myself or anyone else on this forum, this problem is a quite likely a huge inconvenience to them, they probably wouldn't visit these discussions and spend 5 hours reinstalling software like I just did, and they surely would be thinking twice before purchasing another Nokia device in the future.
tl;dr - Nokia recommended update breaks connectivity between software and device, various attempts to fix seemingly simple problem don't work.
Solved!
Go to Solution.

SAME PROBLEM. And none of the many suggested solutions has worked for me yet. I want to thank all on this thread (and many others) for their help. I've learned a lot but I haven't gotten to the bottom of it. I think maybe Nokia needs to ... uh ... bloody well BOTHER TO FIX THIS ISSUE themselves, maybe. Like, cuz they're PAID FOR IT and I'M NOT. Harrumph.
I run Windows XP, and was on Media Player 11, but have rolled back to 9 and 10. I have a Nokia E 72. I have all the latest Nokia cable-drivers, PC Suite, OVI Suite, Connectivity software, etc.. The symptoms are as follows: when I plug in the phone by USB cable, the laptop won't recognize it. It says "USB device faulty" or "failed to load properly" and refuses to get the hardware into its brain. The Device Manager shows only a "Unknown Device" which I cannot install drivers onto. Taking the extra media-card out of the phone doesn't make any difference -- nothing I've done will make the computer recognize the main (built-in) card in the phone. I can't browse to it via any sort of populate / repopulate disk drive, or any other method of connecting it.
As I understand it, this is some conflict with the phone and the new concept of MTP. Media Transfer Protocol confuses the computer, causing it to kind-of think that the phone is kind-of a media player, when in fact it's a whole lot more. So, the "parent" doesn't get loaded, then the rest of the phone doesn't get loaded, then it kind-of tries to load some MTP but fails, etc.. If I could browse to the phone through a non-Nokia connection I'd be happy to do so in order to implement any of a number of the suggestions above. But I can't get the computer to recognize the phone when the phone is plugged in by USB, regardless of all the solutions above.
The problem began a few days ago. It just up and wouldn't recognize the phone. I hadn't installed any updates that I knew of on either item, but it's possible that my memory is faulty and a newer version of this or that snuck in there and screwed it all up. I have tried a serious roll-back to a Restore Point about six weeks old, but that didn't solve the problem. This suggests to me that the problem is phone-resident, since the rollback was to a computer-based Restore Point and I don't have phone rollback capability.
This seriously hampers me. PC Suite, OVI, and some future version of Nokia Suite, will all be useless to me unless Nokia accomplishes the stunning act of supporting their software. I won't hold my breath. Just in general, you'd think that plug-and-play of a phone into your computer would be a lot simpler. Just take the cord -- stick it in the phone; stick it in the computer -- and shazam, you're plugged in. But NOOOOOO we're on NOOOOOOKIA ... Now I know why Microsoft wanted to buy them so badly. They knew they'd all get along and have the same assumptions about software -- that it doesn't really matter whether it works reliably on a user's computer at his home, as long as it works in theory on some programmer's ideal personal computer in Seattle once in a rare while. Nokia? Meet Microsoft. Microsoft? You and Nokia will get along juuuust fiiiine ...

Ovi Social uploading images not working

Similar Messages

Maybe you are looking for