OVI Suite not connecting to map server

After installing the latest NOKIA software updater, the OVI Suite is not connecting  to the map server. It stays: "Wait while retreiving the available maps..." for ever. I unistalled the updater, but the problem is still there. Any ideas to solve this?
Solved!
Go to Solution.

Same problem with my Nokia X6 - "The connection to the Ovi Maps timed out". Now I have no maps
Nokia, give us the old version of Ovi Suite - this one is a piece of **bleep**. I tested on 3 different computers and the problem appeared on each of them regardless that 1 of the computers was with Ovi Suite and PC Suite already installed, the other had only Ovi Suite installed and the third had nothing of the above installed.

Similar Messages

  • OVI Suite not connecting to map server - NOT SOLVE...

    Because this /t5/Nokia-Ovi-Suite/OVI-Suite-not-connecting-to-map-server/td-p/708275 discussion has been marked as solved and it's not. I wonder when we'll have any feedback from Nokia Support? It must be the new Nokia Ovi Suite causing the problem because we all have the same problems. I have tried on three different computers with good stable internet connections and get the "connection timed out" error on all of them. Using Nokia 5230 and have tried both on XP and Vista. 

    @mokrypes
    This seems to be working now. I tried today to download US maps and it completed and installed without any issues. Guess there was some problem with the map server.
    Cheers
    Sandy
    Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

  • Map Loader not connect to map server

    Hi there,
    i have a Problem with Nokia Map Loader. (it doenst matter which version, I tried . and 2.0 and 3.0)
    When i start the map loader i get this Problem:
    "Connection to the map server has been interrupted."
    I do not use any proxy.
    What is the solution of the Problem, i want to use my navigation on my Nokia e72 device
    kind regards

    Have you tried using OVI Suite which is now the recommended way of adding maps?
    Failing that as E72 uses OVI Maps v3.04 you could look at post by ovikovi to download maps directly: /t5/Maps-Navigation-and-GPS/newest-Nokia-Ovi-Maps-​0-1-25-114-manual-download/m-p/778870/highlight/tr​...
    Happy to have helped forum with a Support Ratio = 42.5

  • EAS server error: Could not connect to administration Server

    Hi,
    I have installed Hyperion suite in Windows server 2008 R2. It was working fine but now when i tried to login in to the EAS console, I am getting the following error:
    "Server Error: Could not connect to administration server".
    I tried accessing the same through the web URL and I found "404 error - file or directory not found".
    I verified all my services are up and running fine. I am able to connect to the essbase sever through Excel as well as planning.
    The log retireved from the HyS9eas-sysout.log file is below:
    <Sep 11, 2013 7:06:56 AM JST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Sep 11, 2013 7:06:57 AM JST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Sep 11, 2013 7:06:58 AM JST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
    <Sep 11, 2013 7:07:04 AM JST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0  Fri Dec 17 20:47:33 PST 2010 1384255 >
    <Sep 11, 2013 7:07:15 AM JST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
    <Sep 11, 2013 7:07:15 AM JST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
    <Sep 11, 2013 7:07:15 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Sep 11, 2013 7:07:15 AM JST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log00410. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log.>
    <Sep 11, 2013 7:07:16 AM JST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log is opened. All server side log events will be written to this file.>
    <Sep 11, 2013 7:07:48 AM JST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Sep 11, 2013 7:07:56 AM JST> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EssbaseAdminServices0 has been migrated to backup server and the backup server is accessing the TLOG of EssbaseAdminServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
    <Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getDomainConfiguration()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getRuntimeService()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
      return com.bea:Name=EPMSystem,Type=Domain
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
    Calling getRuntimeService()
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\registry_update.xml file
    EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
    Template for EAS#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar
    Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM Calcmgr, Oracle EPM Planning libraries, Oracle EPM EAS libraries, Oracle EPM Misc libraries, Oracle EPM Xerces libraries]
    BPMUI shared webapp not referenced from EAS#11.1.2.0
    Application name: EAS#11.1.2.0
    Application source: eas.ear
    Server name: EssbaseAdminServices0
    Server port: 10080
    Server SSL port: 10083
    Application context: eas
    Registry product type: ESSBASE_PRODUCT
    Registry physical web application type: ADMIN_SERVICES_WEB_APP
    weblogic.Name property is 'EssbaseAdminServices0', seems to be WebLogic mode
    registry.isRegistryDatabaseCreated()true
    Registry was initialized sucessfully
    Executing pre custom update for EAS#11.1.2.0
    EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
    <Sep 11, 2013 7:09:06 AM JST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'EAS [Version=11.1.2.0]' due to error java.lang.NullPointerException.
    java.lang.NullPointerException
    at java.io.File.<init>(File.java:222)
    at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
    Truncated. see log file for complete stacktrace
    Caused By: java.lang.NullPointerException
    at java.io.File.<init>(File.java:222)
    at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
    Truncated. see log file for complete stacktrace
    >
    <Sep 11, 2013 7:09:06 AM JST> <Emergency> <Deployer> <BEA-149259> <Server 'EssbaseAdminServices0' in cluster 'EssbaseAdminServices' is being brought up in administration state due to failed deployments.>
    <Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
    <Sep 11, 2013 7:09:22 AM JST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
    <Sep 11, 2013 7:09:48 AM JST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
      Version: V3
      Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
      Key:  Sun RSA public key, 512 bits
      modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
      public exponent: 65537
      Validity: [From: Fri Mar 22 05:12:27 JST 2002,
                   To: Wed Mar 23 05:12:27 JST 2022]
      Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
      Key_CertSign
      Algorithm: [MD5withRSA]
      Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82  .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4  .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF  .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C  .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.14.126.11:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.14.126.11:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 10.14.34.75:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.14.218.238:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.14.218.238:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 10.14.34.75:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices0" for domain "EPMSystem" running in Production Mode>
    <Sep 11, 2013 7:09:48 AM JST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
    <Sep 11, 2013 7:09:48 AM JST> <Warning> <Server> <BEA-002611> <Hostname "SJ015040", maps to multiple IP addresses: 10.14.126.11, 10.14.34.75, 10.14.218.238, 0:0:0:0:0:0:0:1>
    <Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
    HyS9eas-syserr.log is empty and I dont find anyother details from the other log files.
    Kindly help me out in solving this issue.
    Thanks in advance.
    Regards,
    Balaji P

    Hi John,
    Sorry for replying late.
    I ran the EPM diagnostic and found EAS & APS application are failed. So as you mentioned, i tried re-deployment through EPM configurator.
    But Re-configuration fails with error "An unexpected error occurred and the application will have to shut down" .
    When i looked in to the Config tool.log,I got the following messages.
    [2013-09-17T18:17:04.635+09:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Parsing server FinancialReporting0 on port 8200 from registry
    [2013-09-17T18:17:04.827+09:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Unexpected error:[[
    java.lang.NullPointerException
    at com.hyperion.hit.tool.deploy.utils.UIPortUtil.<init>(UIPortUtil.java:83)
    at com.hyperion.hit.tool.deploy.utils.UIPortUtil.getInstance(UIPortUtil.java:53)
    at com.hyperion.config.wizard.DeploymentField.getAppServerDeploymentData(DeploymentField.java:235)
    at com.hyperion.config.wizard.DeploymentField.<init>(DeploymentField.java:56)
    at com.hyperion.config.wizard.impl.DeploymentForm.<init>(DeploymentForm.java:57)
    at com.hyperion.config.wizard.impl.DeploymentState.initializeBeforeShowOnNext(DeploymentState.java:56)
    at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:522)
    at java.lang.Thread.run(Thread.java:619)
    Since it is similare to the Oracle konwledge base article - (Doc ID 1570293.1), I tried adding the shared service domain to the Windows host file. But i am still recieveing the same error message as above.
    Appreciates your help.
    Thanks & Regards,
    Balaji P

  • Syncing from E7 to Nokia Ovi Suite " Not Working "

    Hi
    First i opened Ovi Suite today & it worked just fine, & it notified me about new update & after i did update to 3.1.1.90 nothing start work as normal as it use to be.
    I restarted Ovi Suite & first thing i keep getting is this note:
    Operation failed
    Unable to read the tracks.
    Of course the syncing problem not solved after this " welcome note ! "
    Always nothing sync, not contacts photos nor videos nothing at all & i got this message all the time:
    Sync done
    Some content was not synced properly.  You can check what went wrong and then sync again.
    Warnings-Contacts
    There was problem with syncing your contacts. Please restart Nokia Ovi Suit. If  that does not help, try repairing Nokia Ovi Suite
    Error code: 83940004
    As i said at the beginning of my message restating not helping & i did repair sync but nothing worked in both ways & now i'm writing to u cuz i'm sure the problem is with this new software version.
    So is there any chance to save my contacts photos & videos to my Nokia Ovi Suite???

    Hi Daveob64,
    Could you please follow this step by step process? 1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
    2. Delete the files from here If anything is there
    C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
    C:\Documents and Settings\user\Local Settings\Application Data\Nokia
    C:\Documents and Settings\All Users\Application Data\OviInstallerCache
    3. Please search and download MSI clean up utility from microsoft website
    Once installed please select the programs related to Nokia and click remove.
    Restart Computer.
    Then download from microsoft website and install Windows Installer, so that the installer is upto date.
    4. Restart the PC
    5. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/​nokia-ovi-suite
    6. Connect the device and try
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Ovi Suite Network connection error

    Hello everyone,
    Since two weeks I just cannont acces the server from the update service on ovi suite. I've never had that problem before the error I get is this one:
    network connection error
    nokia ovi suite software update service is not responding make sure the internet connection is working o check your firewall settings and try again later
    network connection error
    "nokia ovi suite software update service is not responding make sure the internet connection is working or check your firewall settings and try again later"
    My connection works just fine and I disabled the firewall and antivirus, so I don't know what's happening. 
    I have a N86 8MP and even though I know I cannot get a nex firmware I just want to reinstall the firmware but it's impossible to do it.
    One last question, is it posssible to make a downgrade of the phone's firmware?
    Thank you!

    It seems a server problem..keep trying..
    Meanwhile you can uninstall and reinstall NOS again if there is some thing wrong with Ovisuite
    1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
    2. Delete the files from here If anything is there
    C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
    C:\Documents and Settings\user\Local Settings\Application Data\Nokia
    C:\Documents and Settings\All Users\Application Data\OviInstallerCache
    3. Please search and download MSI clean up utility from microsoft website
    Once installed please select the programs related to Nokia and click remove.
    Restart Computer.
    Then download from microsoft website and install Windows Installer, so that the installer is upto date.
    4. Restart the PC
    5. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/​nokia-ovi-suite
    6. Connect the device and try
    "One last question, is it posssible to make a downgrade of the phone's firmware?"
    -- No it is not possible to downgrade
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Ovi Suite - not getting past "Setting up"

    I am having trouble connecting to OVI suite, all I get is "Nokia 5800 XpressMusic " "Setting up...", but it never completely connects.
    I have uninstalled/reinstalled a number of times including using Nokia PC Suite Cleaner 7.1.1.
    I have also checked your forums and note that this appears to be a common problem but with no real solutions!
    I am using:
    Ovi Suite v2.2.1.23
    Win Vista SP2
    Nokia 5800 v40.0.005 (latest available from three)
    Please help!!

    Hi Mad_Hatter,
    Could you please follow these step by step process?
    1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
    2. Delete the files from here If anything is there
    C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
    C:\Documents and Settings\user\Local Settings\Application Data\Nokia
    C:\Documents and Settings\All Users\Application Data\OviInstallerCache
    3. Please search and download MSI clean up utility from microsoft website
    Once installed please select the programs related to Nokia and click remove.
    Restart Computer.
    Then download from microsoft website and install Windows Installer, so that the installer is upto date.
    4. Restart the PC
    5. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/​nokia-ovi-suite
    6. Connect the device and try
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Nokia Ovi Suite - Not syncing

    Nokia n97 mini.
    I keep having issues where my phone and PC sync fine for a period  then just stops. Twice I have removed and reinstalled software. My latest problem is I ovi suite can acknowledge phone is connected but it will not sync. I can view all my phone details on the PC. I find it very frustratiing. Phone is 3 months old.
    Solved!
    Go to Solution.

    Hi Daveob64,
    Could you please follow this step by step process? 1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
    2. Delete the files from here If anything is there
    C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
    C:\Documents and Settings\user\Local Settings\Application Data\Nokia
    C:\Documents and Settings\All Users\Application Data\OviInstallerCache
    3. Please search and download MSI clean up utility from microsoft website
    Once installed please select the programs related to Nokia and click remove.
    Restart Computer.
    Then download from microsoft website and install Windows Installer, so that the installer is upto date.
    4. Restart the PC
    5. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/​nokia-ovi-suite
    6. Connect the device and try
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Problem related to ovi suite internet connection

    There is a poblem with ovi suite not geting connected to internet in proxy enabled areas..
    so it would b better if proxy settings can be done in ovi suite and also the speed of ovi suite is very slow...............

    Well, ask who then.   Download the latest version of Nokia PCSuite, install next to OVI Suite.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • HT4922 Downloaded 5.1.1. to my iphone. Now, Safari will not connect to my server.  Can not download web pages and many of my apps. Running very slow sluggish! Is there a fix? Sound like other users are experiencing same problems.  Anyone have a solution?

    Downloaded 5.1.1 to my iphone. Now, Safari will not connect to my server. Can not download web pages and many of my apps. Email seems to be ok. iphone running slow and sluggish.  I have read several other users have experienced the same problem. Any solutions?

    Basic troubleshooting steps oultlined in the User Guide are restart, reset, restore from backup, restore as new device.
    You need to go through all steps in succession until your problem is solved.  If going through ALL these steps fails to resolve your issue, then you'll need to bring your phone into Apple for evaluation and possible replacement.

  • Safari will not open on my iPad Air...."Safari cannot open the page because it could not connect to the server." There were recent updates on my iPad Air. How can I fix this problem?

    How can I correct the issue of Safari not connecting on my iPad Air? It was working great 2 days ago.....now on September 20 it is not working! I have an internet connection but Safari will not open. "Safari cannot open the page because it could not connect to the server."

    Hello Beckieor,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
    iOS: Troubleshooting Wi-Fi networks and connections
    Follow these steps to troubleshoot the above issues:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Can anyone help - my mail on my ipad will not connect to the server. My internet access is fine. How can I get my email to connect to the server?

    My ipad will not connect tot he server when trying to access my mail. This has been happening since last Sunday. Some have said it is due to the latest software update. I am able to connect to the internet.
    I am not having this issue on iPhone.
    I checked all the settings, the wireless router in my house and at work.
    I have completed a hard reset of the device.
    I had our IT guy at work look at it.
    He said to contact Apple....
    Any thoughts?
    Thanks!

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    Gmail Account Will Not Connect to Gmail Server
    http://support.apple.com/kb/ts3058
    Error: “Server Unavailable” when accessing Yahoo on iOS devices
    https://help.yahoo.com/kb/mobile-mail/error-server-unavailable-accessing-yahoo-i os-devices-sln8834.html?impressions=true
    Unable to Delete eMail Messages
    http://support.apple.com/kb/TS2475
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to delete ALL mail messages from iPhone/iPad in one step
    http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
    How to Attach Photos and Videos to Emails on an iPhone or  iPad
    http://www.wikihow.com/Attach-Photos-and-Videos-to-Emails-on-an-iPhone-or-iPad
    iPad Basics: Sending an Email With An Attachment
    http://ipadacademy.com/2012/03/ipad-basics-sending-an-email-with-an-attachment
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Send Multiple email Attachments from your iPad or iPhone
    http://ipadacademy.com/2014/03/how-to-send-multiple-email-attachments-from-your- ipad-or-iphone
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    Importing a Contact List CSV to the iPad
    http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email! Mail Client with Attachments and Cloud Services
    https://itunes.apple.com/app/group-email!-mail-client-attachments/id380690305?mt =8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
    How to delete an email account on your iPad
    http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
     Cheers, Tom

  • Both my iphone 4s and my ipad3 will not connect to the server when trying to access my email account. Why, and how do I fix it.

    Since 29/10/2012 my iphone 4s and more recently my ipad 3 will not connect to the server when trying to access my email account. All I get is an error message saying that 'cannot get mail, connection to the server failed' I hadnt changed any settings it just happened. I have since done a complete re-boot on the ipad but to no avail. Anybody got any suggestions?

    No. Everything was working fine and then it wasn't. I hadn't changed any settings or switched either one off. When the phone stopped working properly I ignored it because I always have my ipad with me but that just sopped working properly and now I am stuffed. I have tried most solutions suggested on here even wiping the ipad clean and re-booting. I did this exactly the same way as when I first got it but still no joy. The same with the phone.

  • Running transactional replication on SQL server 2008R2 but: "The process could not connect to subscriber 'SERVER NAME'"

    I've set up Replication (transactional replication) between two remote servers. On the one of server that I configure Distribution & publication .another server is subscription. The subscription is all set & snapshot agent is started .but the actual
    replication doesn't take place.
    When viewing the Synchronization Status of the subscription, i get an error, saying "The process could not connect to Subscriber ‘Server name'."
    Clicking on start, this is the error message I get:
    The agent could not be started.
    Additional information:
    An exception while executing a Transact-SQL statement or batch.
    SQL Server Agent Error: Request to run job Server1-EDUSRV-Pubs-Server2-14 (from User Server1\Administrator) refused because the job is already running from a request by User sa.
    Change database context to 'EDUSRV'.(Microsoft SQL Server Error:22022)
    What can i do?
    Please help me.Thanks

    The error The process could not connect to Subscriber 'Server name' indicates that the Distribution Agent process account does not have enough permissions to connect to the Subscriber.
    If this is a push subscription, verify the Distribution Agent process account is db_owner in the distribution and subscription databases, is a member of the PAL, and has read permissions on the snapshot share.
    If this is a pull subscription, verify the Distribution Agent process account is db_owner in the subscription database, is a member of the PAL, and has read permissions on the snapshot share.
    The permissions required are covered in
    Replication Agent Security Model.
    If you have anymore questions, please let me know.  I hope this helps.
    Brandon Williams (blog |
    linkedin)

  • HT201263 the itunes tales me that can not connect to update server, i tried to connect my i pad ever ting is ok to the ipad but my iphone stop working after update and i tried all solutu=ion suggested on the internet please i need help

    after i update the iphone 4s to ios 6.1.1 my i phone stop responding and a message appear tell to connect to i tune i did all the solution and put my iphone in dfu mode and nothing happen my i phone is gone no solution and a message appear tells that can not connect to update server but my ipad work at the same pc the problem in the i phone, plz some help

    Was thje TM backup 10.6 also?
    I never use TM for Backups, far better less painful backup methods, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imagine something not being covered there.

Maybe you are looking for

  • [SOLVED] Mobility Radeon HD 5400 Series with xf86-video-ati

    I have an hp laptop with the following VGA Devices: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Manhattan [Mobilit

  • Passing parameter between pages

    Hi all, I have a project which has two pages, and those pages act like master-detail. The master-like page is a read-only form with navigation buttons. The user navigates the records and when the user finds the record, s/he clicks the submit button,

  • Cannot Connect to Desktop Manager

    For some reason I can not get my Playbook to connect to the Desktop Manager.  I have tried on 2 seperate computers (one XP and one Vista).  I have tried deleting and reinstalling the latest version of DM.  I know it's not the cable as I am able to co

  • How can I add photos to a video without interrupting the sound of the original video?

    In PE11, How can I add photos to a video without interrupting the sound of the original video?

  • I dont know what version of adobe flash player i need

    I am trying to watch sometime on my tv and it says i need adobe flash player. I go to download it and they give me choices: YUM for LINUX, tar/gz for other linux, rpm for other linux, or APT for Ubuntu 10.4+. Please tell me what I need. TRhanks