Ovi won't recognise 6260 using USB connection

I have just purchased a new 6260 and installed Ovi.
When I get to the part to link to the 6260 it just hangs trying to recognised the 6260.
There is communication as the 6260 has a program executed it seems to start the link but displays a message "No response from the host"
If I go to "Safely remove hardware" the 6260 is not listed in any form.
I have tried all of the varying checks on the Nokia site.
In Device Manager>Wireless communication Devices there is "Nokia 6260 Slide USB Phone Parent" with an ! - Device Status is "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
My PC OS - Win XP SP3 Pro with MCE 2005
Solved!
Go to Solution.

Could you please try this?
Using Device Manager
To fix this error, first try to update the driver from the Device Manager. To open Device Manager, right-click My Computer on your Desktop, and then on the Hardware tab, select the Device Manager button.
In the Device Manager window, identify the CD or DVD drive item (with Yellow exclamation mark), right-click on it and select Update Driver. Follow the screen instructions to update the device driver and restart your PC.
Using Registry Editor
If updating the driver does not resolve the problem, it indicates that there is a problem in the registry. To fix this problem, you may have to remove a few keys from the registry.
Note: Be careful while working with the registry editor because changes done to the registry using the Registry Editor are irreversible and mistakes can leave you with more problems than when you started. Therefore, it is recommended that you make a backup of the registry before proceeding with the changes.
After you have removed the registry keys listed below, you will have to reinstall all applications that you use for CD or DVD recording to make them work properly.
To fix the error by editing the registry, perform the following steps:
Exit and close all applications currently running on your PC.
On Start > Run type Regedit and press the Enter key.
Next, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
Delete any of the following registry entries if they exist under this key:
LowerFilters
LowerFilters.bak
UpperFilters
UpperFilters.bak
Restart your PC and open My Computer to ensure that the CD-ROM drive is visible.
Also, open the Device Manager again to ensure that the yellow exclamation mark and the error code is now gone.
Restart your PC and open My Computer to ensure that the CD-ROM drive is visible.
Also, open the Device Manager again to ensure that the yellow exclamation mark and the error code is now gone.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Similar Messages

  • My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

    My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

    You will need to install the printer on your Mac
    Open System Preferences (gear icon) on the dock
    Open Print & Fax
    Click the + (plus) button at the bottom of the printer list
    Wait for your printer to appear in the next box, then click it to highlight it
    Click Add at the lower right
    Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
    You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

  • Connect Omron PLC CP1L to Labview through NI OPC server using USB connection

    Hi Labview experts! I need help on integrating Labview with Omron PLC CP1L using USB connection. When adding a new channel, which of the device driver I should choose for USB connection? And how to link the tag to I/O in cx-programmer? It would be perfect if anyone can guide me through the whole process. Sorry if my questions sounds stupid as I am really new to these.
    Thank you in advance

    same here I'll facing a same problem if anyone would share that will really helpful.

  • HT201317 have uploaded pictures using usb connection but they have not appeared in photostream - how do I back them up

    have uploaded pictures using usb connection but they have not appeared on the stream.
    cheers, Martin

    Uploaded pictures using usb?  You mean to your computer?  That only stores them on your computer, it doesn't add them to photo stream.

  • Has anyone recently installed the newest i-tunes but it won't recognise their phone is connected even though it makes the ping noise?

    Has anyone recently installed the newest i-tunes but it won't recognise their phone is connected even though it makes the ping noise?

    Give this a shot http://support.apple.com/kb/ts1538

  • Can I I place a call from my iPhone 5s using USB connected iMac

    I was pleasantly surprised when I found my iMac (2012-Yosemite 10.10.2) could be notified and answer calls from my USB connected iPhone 5s (OSx8.2).
    Question: Can I also place a call from my iMac; and if so, How? Is there an app for that?

    USB connection has nothing to do with it. They have to be on the same WiFi network. It's part of 'Continuity' in OS X Yosemite and iOS 8. You can place calls using FaceTime on your Mac.

  • I get "Reading Error" when using USB connection from Ipod Touch to car radio. Any ideas?

    I am trying to connect an IPOD Touch with my car radio via USB port.  Using proper cable which works.  When I connect the auto radio automatically tries to hook up with the Ipod but then displays "reading error"

    The the car-system manyfacturer say it will work with your model iPod and its iOS?
    Not all do.

  • Hangs using USB connections

    Hi,
    what do you explain it seems to be almost the same as mi case.
    iMAC with anything conected : no problems.
    All tests, onyx,.....all OK!
    If I conect my scanner and/or my USB_extHD and/or my HP laserjet .... then in any moment my iMAC hangs on color circle and it has to be stopped with rear button.
    log:
    [0x6a56600] The IOUSBFamily was not able to enumerate a device.
    4648.870 [0x6a56600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 3 of hub @ location: 0xfd100000)
    what it means?
    It's a new 5 months iMAC!!
    I'm trying to understand what happens. Could anyone help me please??
    Thank you.
    AZIMUT

    Hello azimut and welcome to Apple Discussions
    Sounds like either a bad device, a bad USB cord or there something wrong with the way you have the devices connected. Can you give us a little better description of how you have everything plugged in, we can only imagine how you have all those devices connected up to the three ports on the back of your iMac.
    Try connecting things up to the three Ports this way:
    Port 1: Keyboard with only the Mouse connected to Keyboard.
    Port 2: The External HD
    Port 3: A Mac Compatible Powered Hub (examples below) to connect the printer, scanner and any other USB devices into.
    Examples of Mac compatible Hubs:
    http://catalog.belkin.com/IWCatProductPage.process?Product_Id=198333
    http://www.usbgear.com/USBG-4PU2SI.html
    Dennis

  • Use USB-connected hardidsk as timemachine backup using AEBS 802.11n

    Hello
    I got this external hard disk MyBook 1TB. When it is connected to my Macbook Pro directly via USB or firewire, I can configure it as backup disk for timemachine.
    Hwever if I connect this same hard-disk to the AEBS 802.11n via USB I cannot see it in the time machin utility.
    I thought this would be an alternative to the timecapsule. (as i was told it is possible).
    Any hints?
    SL

    Time Machine via Airdisk: Possible? Yes. Apple supported? No.
    Time Machine backups to AirDisks (e.g. USB HDD attached to Extreme 802.11n) is unsupported, but has been successful by some. As well, once you decide to move any old TM backups (HDD connected directly to the Mac) to an AirDisk, you cannot continue backing up to your previous TM backup. The format it saves to vs. a local HDD is different. The folder structure you see becomes a sparsebundle/disk image via the AirDisk.
    If you are interested in proceeding with your plan, check these links out:
    http://discussions.apple.com/thread.jspa?messageID=8225748&#8225748
    http://discussions.apple.com/thread.jspa?messageID=8650723&#8650723
    http://jamesshore.com/Blog/How-to-Accelerate-Time-Machine.html

  • How do I capture video from canon d5 mark II to fcp using usb connection

    I have always imported video to fcp via firewire using my tape cameras but soon I will have to make the jump to non linear cameras eventually as tape becomes obsolete. I haven't got a non linear camera but would like to know if there's a simple way to upload video footage with a camera like the 5d or similar non linear video cameras. Also, I'd like to know if it is possible to select the in and out points before importing like you do with tape devices so that you don't have to download all the footage shot. Thanks for any advice.

    Attach camera via USB or put card in card reader.
    Go to FCP, and go to the Log and TRANSFER window.
    If FCP recognizes the card, you will see your clips listed on the left.
    You can view them, set Ins and Outs, and import just what you want.
    Once you choose a section of video and import it, FCP converts (transcodes) from its original camera format to Apple ProRes422 - a more edit friendly video file.

  • Using USB Connected Printer

    What am I missing? I want to be able to connect my Dell all-in-one printer to the AE and print from my laptop over wireless. Problem is, when I connect the printer this way how will I be able to print from my hard-wired desktop? The desktop PC does not have wireless.

    "The desktop PC does not have wireless." its connected thru ethernet, so the printer connected to the usb port on the Extreme router will show as Bonjour for the desktop. I don't run Windows and think you need a free piece of software called Bonjour something from Apple. Maybe others can chime in here.

  • Ipad has message on screen "icloud Backup that it hasn't been done in 3 weeks...... Fully charged it. Using usb, connected to my mac computer, I've synced it with itunes, got updates on itunes with no problems, message remains on ipadscreen.

    Hi.  Not sure what happened but I was able to use my ipad in December and it was backed up(sync with itunes). Now there is a message on the screen "iCloud Backup.....your icloud hasn't been backed up in 3 weeks...." and to click on ok.
    I'm unable to clear the message.  I syned it with itunes and tried again but its still there and I can't do anything with the ipad.  The ipad go blank  in a couple seconds, and I cannot use slide to unlock. 
    Can someone please help me with this.
    Thank you,
    Laura

    See if this helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Thunderbird email application won't download when using wired connection to WRT610N

    I've been having problems lately getting my email application, Thunderbird v.13.0.1 to work.  When I directly connect my cable modem to my iMac, it will download and send emails, but not when connecting through the router.  I just updated the firmware to V.2, and still having the problem.  Any ideas?
    Solved!
    Go to Solution.

    Tifosa wrote:
    Ok, enabled DMZ
    with Source IP Address = Any,
    and Destination IP = my computer's IP.
    Still not able to send email, blahh.
    I appreciate everyone's suggestions though.
    Try to disable the SPI firewall. We have a tendency to disable this feature if we ran out of options. It’s still not recommended to disable SPI firewall on the router because this serves as the protector of your network...

  • ITunes won't recognise device using new PC with windows 8

    i have a new PC with windows 8. iTunes is loaded but it will not recognise any devices to sync or back up. Please advise. Thanks

    Start withiOS: Device not recognized in iTunes for Windows
    and then go toTroubleshooting issues with iTunes for Windows updates for more help.

  • Can't create Internet connection to My Mac Using USB

    Hey All,
    Recently i bought a new Mini Router Huawei 4G LTE E5732 Router, it was connected easily using WI-Fi to my Mac (MacBook Pro Retina, 13-inch, Late 2013)
    installed the latest update OS X Yosemite 10.10.2, I tried to be connected through the USB port on the Mac using USB connection in the Network option on the System preferences, but i was surprised that there is no such a choice !!
    Please can anyone help me, it is affecting my job !

    It was solved, Thanks to the Apple customer service
    They advice me to go to this link and it solved everything after updating the App version installed for the Mini Router on my Mac
    http://consumer.huawei.com/en/mobile-broadband/mobile-wifi/support/downloads/e53 72-en.htm

Maybe you are looking for

  • Getting error when placing jsp file in tomcat root folder

    hello experts, i have developed an application on netbeans 6.1 for mail. It is working perfect when i run it from netbeans, but when we copy those jsp files to ROOT folder of tomcat5.5 server, it is showing me following error. rg.apache.jasper.Jasper

  • Html for an applet with swings in 1.4.1 or 1.3.1

    Can anyone send me an html document to launch the applet in a browser. I have very basic html, but I need one that uses the appropriate plug-in and that has parameters such as height, width, etc. My applet uses tabbed panes, dialog boxes and combobox

  • How to transform OSB response element

    Hi I have an OSB response document as follows <env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope"> <env:Header/> <env:Body> <uwd:getPersonCourseResponse xmlns:uwd="http://eadf.ites.ayd.edu.au/data"> <uwd:Response> <uwd:PersonID>2113446<

  • Camera/video wont open-8330

     I have a BB 8330, V 4.3. My problem started when i downloaded BB APP world. If i click on the camera it goes black and then shows " Camera could not start, please close all other apps". I deleted the APP world and the games i downloaded. they are no

  • Behaviour of post increment/decrement operator

    int i = 1; i = ++i; System.out.println( i ); //output is 2 i = i++; System.out.println( i ); // output is 2, WHY?