OVM 2.1.2 does not recognize SATA 150 or SATA 300 disks with Intel ICH10R

OVM 2.1.2 does not recognize SATA 150 or SATA 300 disks.
This same machine recognizes these disks with Enterprise Linux 5.2 x86-64.
The motherboard uses the onboard SATA connectors:
http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductID=2842&ProductName=GA-EP45-DS3R
The SATA disks tested were:
WD Velicoraptor http://www.wdc.com/en/products/products.asp?DriveID=459
Segate http://shop1.frys.com/product/4697788;jsessionid=BS106nlxF8+a7Vj0qKAh0Q**.node1?site=sr:SEARCH:MAIN_RSLT_PG
Hitachi Deskstar http://www.hitachigst.com/tech/techlib.nsf/techdocs/17351B59F3028F4486256D3D0065D995/$file/d7k250S_sp.pdf
I could install 2.1.2 with some ancient IDE disks.
Is there something I can tweak to get the SATA disks recognized?

Just a wild guess on my part. Look in your /etc/modprobe.conf on your working config. Then try copying that kernel module over to your OracleVM server if it is not already there. If the OracleVM server already has the module then check modprobe.conf on your OracleVM server to verify the module settings are in there.

Similar Messages

Acrobat 9 does not recognize the smart card reader that work with other app. Can someone help me?

Hi to All,
Acrobat 9 (included in CS4 design premium) does not recognize the smart card reader. I have a smart card reader ACR38 smart card that works with all applications except Acrobat 9 pro. I tried to uninstall and reinstall it again, but when I try to insert the digital signature message is always the same, that does not find the Acrobat reader. Can someone help me?

Hi MartinR
Thank you for your reply, i have tried what you suggest, and it did not work, the i DVD opening title changed but not the embedded movie.
Perhaps it is a setting in Final Cut Express?
After capturing my footage, i open a new project then i convert all clips to anamorphic, to give me the letterbox effect, i have tried now with and without anamorphic.
In my canvas screen, the footage does not fill the square, even if i have not selected anamorphic, and fall well within the TV safe areas, but the only way to ill the canvas up is to crop it bigger, but still when i export it does not give me the full screen view.
Any ideas?

Macbook does not recognize external USB drive - except when booting with CD

Hi all,
I recently swapped my Macbook's internal HD (Toshiba 100gb 5400 rpm) into an external USB enclosure (Eagle Consus). The computer does not recognize the external HD, even when using two USB cables for extra power. No luck with safe mode or resetting PRAM. Disk utility just hangs with spinning wheel if I start it. Switching the USB ports does not help.
I thought it might be a power problem until I noted the following:
1)The external drive works fine if I boot the Macbook from the Mac OS install CD... with this I can run disk utility and scan the drive with no problem
2)It works fine on an old Mac Mini with only ONE of the USB connectors plugged in
3)The enclosure worked fine on the Macbook when I had the new drive in it (320 GB 7200 RPM) while copying the files over
Any thoughts?
Many thanks,
--T

It is actually using a power supply, yet it will not actually power on unless it is connected to a computer's USB port. At least this is how it works on my old desktop running Windows 2000. When you disconnect the drive from Windows, or put the machine in hibernate mode, the device actually shuts down. It powers back up once the machine wakes up from hibernate mode.
It's a somewhat older device which predates the Macbook Pro, but it claims to support older Mac, such as the G3, G4, G5, iMac, iBook. OSX 10.0.4. So perhaps it's just too old?
It's a Buffalo HD-HB250U2 (250 GB).
So you're in Japan too?

Leopard does not recognize Tiger install DVD as startup disk

I upgraded my MBP to Leopard. After that, the MBP never recognize Tiger install DVD and Tiger installed extra HDD as startup disk. They have never appear in the startup disk window in system preference. and I tried to use the option key or c key at startup, but they also could not work (just start from Leopard installed internal HDD). On the other hand, Leopard install DVD has been recognized.
I could not find out the same problems in net work.
Does anybody know good solution?
Thanks.
N.B.

In fact, this is the most disappointing feature in Leopard.
Under Tiger I had partitioned my hard disk, with OS 9 running on one partition.
The startup of clean OS 9 worked fine with OPTION key at startup. Now, OS 9 is not recognised any more, none of my old applications are, the volume is no longer recognised as startup option under preferences or when starting with the option key, and I cannot even try to reinstall OS 9 on the partition (in case something was damaged during the upgrade process), as the CD is not recognised when starting up with using the C key... Very frustrating, and I had not heard or read about this problem before.
Only solution right now seems to be> get as much as possible on a DVD or CD, move it to an older Mac, convert, if necessary (eg old Quicktake or PICT pictures, using Graphic Converter) and move them back to the leopard machine. What a waste of time.

My MacBook Pro does not recognize my iPhone 4 when I connect with USB

As the subject line says, when I connect my iPhone 4 to my MacBook Pro via the USB cable, it normaaaally opens iTunes and iPhoto automatically and syncs and imports photos from the phone. But, for some reason, that doesn't happen anymore... Now when I plug in my iPhone with the USB...nothing happens.
The USB still works as a power charger. I even tried a different newer iPhone USB cable from my friend's phone...same problem. I tried both USB ports.
I update my iPhone, my Mac, my itunes, my iphoto...everything. I reset everything at least a couple times. Still no luck!
I did a Disk Utility verify check...it found no problems, the volume 'appears to be ok.'
The iPhone still syncs with iTunes over WiFi, but unfortunately I can't back up my photos from my iPhone wirelessly (I don't have iCloud set up). I want to do it via USB.
Anyone out there with any advice on how to get my computer to recognize my iPhone?
THANK YOU!!!

Ive been struggling with this problem all day, I was trying to upload my pics and videos from my iPhone 4s (version IOS-7) and my computer didn't seem to recognize my phone. Well I finally gave up. My iphone was plugged into my computer via USB, and my iPhoto would not open up automatically like it always had before I updated to IOS-7.
As a last ditch effort I happened to open up my software updates in the apple icon. Lo and behold, once I agreed to update my iTunes app on my mac OSX 10.6.8, it opened my iTunes and a window popped open asking me to click on 'trust this computer'. I did that, and suddenly my iPhoto opened up and filled up with all of my iphone 4s (version IOS 7.1.1) pictures and videos! I could not find an answer anywhere online. I guess the trick is to manually open up iTunes before you attempt to upload pictures/videos from your iPhone into iPhoto.

Iphone 3gs is not charging nor detected by i tunes and computer shows 'One of the USB devices attached to this computer has malfunctioned and windows does not recognize it'

Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-( it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks

As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock

Image capture does not recognize Canon Scanner

I have two Canon Scanners, a Canoscan 8800F and a Canoscan LiDE 60. Image Capture does not recognize either of these. Both worked with Mountain Lion.

This user found some success acutally using *older* drivers. While that sounds odd, it might be worth a try: https://discussions.apple.com/message/23759017#23759017
I used to have a LIDE 60 - it is a great little machine. Good luck!

My iMac does not recognize external hard drive

My iMac does not recognize my external hard drive. Disk utility recognizes it and a test of the hard drive does not review any error. I use the hard drive as a back up for the time machine. This problem comes and goes. It comes when I turn off and turn on the computer, with the hard drive attached.
Please help.
Insightful

can be this reasons
01 , you have problem with connection ? check the port if you can find any problems physically .
02. if not try to change the cable and with connection ,
03. may be its good idea to check the hard drive with another mac ?(if you have )
Did you note any diference of sound from Hard Drive ? listen to it that carefully to note some unusual sound comes when the hard drive works.
check this link this might usefull: http://www.youtube.com/watch?v=JjgOSxKy-FQ

Mavericks does not recognize audio CD's on iMac

Mavericks does not recognize audio CD's on iMac. Is there a solution for this?
My first time on this platform as could not find a solution on net.
B

+1 here
iMac with OS X 10.9.5 does not recognize CDs on external superdrive. Tested with two separate external drives. CDs not defective. No issues with DVDs. Any solution available?

T-61 Visat Prof. 32bit does not recognize internal 1TB SATA HDD

Hi,
I just bought 1TB WD internal SATA 2.5" hard drive and connected to USB of my laptop via SATA external adaptor but my laptop does not recognize this driver.
I have Windows Vista 32bit OS.
Any advise how I can fix this? My intent is to transfer all data from internal HDD to the new HDD and then replace old HDD with new one and upgrade to Windows 7.
THanks,
Ash

There are a few problems regarding the way you are trying to do this. First is that your new drive won't be recognized by windows until it's partitioned and formatted. Also, since you're upgrading the OS, you'd be better advised to install the new drive in your laptop and install the operating system, windows will setup the new drive for you then you can connect the old one and transfer any of it's data onto the new drive. If you do it this way it should be effortless, but if you attempt the way you described you could run into problems being that you have an advanced format drive replacing traditional sata drive. Also if you allow windows to initiate and format the drive you know it will be done properly for the type of drive you have.
Another suggestion would be to have windows setup the drive with at least two primary partitions. With a drive that large it's nice to have more than one and if you ever find the operating system badly corrupted you could wipe that partition and reinstall without losing any of the data in other partition/s. You can also install multiple operating systems. I can be very handy to have a backup operating system in case something goes wrong so you can be up and running immediately upon rebooting. There is nothing more frustrating than having a non-functioning computer when you badly need to get some work done and this can allow you to continue working and worry about fixing whatever went wrong at a time of your choosing.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Added Hybrid SATA drive to ThinkCentre - does not recognize old IDE drive - Suggestions?

I added a 1TB Seagate Hybrid drive to my old ThinkCentre 808532U. I removed the jumper from the old IDE drive so it would be considered the secondary. I installed Windows 7 Professional 32 bit on the hybrid SATA. The old IDE had Windows XP. I want to use the old IDE drive as the secondary so I can access the data, pictures, etc. I do NOT want to boot XP. The system boots up fine with Windows 7. However, the system does not recognize the old IDE drive. I have gone into BIOS and changed the Parallel ATA to Secondary. The system still does not recognize the old IDE drive. Can someone provide recommendations? Thanks,Napp

I finally experimented enough that I found the solution! I tried putting all the IDE drives into Startup even though none showed any hardware assigned. I set Parallel ATA to Both. My machine would start up but not show the Logo screen or any screen for that matter. I put a Windows 7 install disk into the DVD ROM and got the Logo screen. I F1'd back into BIOS and suddenly two of the IDE entries in Startup were populated with the DVD drives. I set the order I wanted in Startup and saved the configuration. When Windows started it installed drivers for two devices. I looked into Computer and all the drives were listed!!!!!!!!!!! So now after several long nights I have my system configured properly for all the drives and all Windows 7 updates applied. I am waiting for delivery of a 256M graphics adapter and a gigabit ethernet adapter to see if I can increase performance. Time to sleep now..............

MSI x48c platinum does not recognize 2 PCIe boards

Hello,
I had the same recycling boot problem as others have noted.
It occured with the Antec Phantom 500 power supply and the Antec Signature 850.
Swtiched to a Cool Master Pro 650 and no more recyling boots.
However, I have 2 PCIe cards that this system board does not recognize in the POST (quick boot disabled) and no new hardware is found under win XP.
Boards are:
Black Magic Design Intensity (HDMI board)
http://www.blackmagic-design.com/products/intensity/techspecs/
United Audio UAD-2 Quad (audio DSP)
http://www.uaudio.com/products/uad/uad2neve128/index.html
Does not matter if they are together, alone or which PCIe slot.
These bpards are needed for my work.
anybody else have baords that the x48c can't see?
These same boards are fine with other motherboards.

i just remember i had once similar problem with a sata driver. the issue is this you can not adjust everything in bios in one go and expect mobo to know about it. what i mean is this for instance you disable the raid then you save it and exit and then when it reboot you go back to bios and reset another another parameter, you save and exit and on reboot you go back to bios and reset another parameter. i got round the prob that way and it worked and mobo saw the sata HDD. give this a shoot good luck and finally make sure raid is disabled
this is what i would do
1- make sure the jumper setting on your IDE Hdd is correct (Y may have to try this twice as there are two different setting on jumper setting for Master)
2- connect the sata HDD
3-click on power
4-go to bios and disable raid save exit
5-on reboot go back to bios
6--on first option click on it then you should see all devices that can be seen by mobo if you do not see sata HDD you have to click on enable for the auto to see the device once it sees the device save and exit. REMEMBER THE JUMPER SETTING ON IDE HDD CAN CAUSE PROB . SO try the other jumper setting for master, repeat this procedure once more hopefully you get it right

HP Pavilion Elite e9120y bios does not recognize any cd/dvd/bluray or hard disk drives

I erased my hard disk to install Windows 7. Now my computer intermittently does not recognize that there are any drives attached to the sata ports. I go into BIOS pressing F10 and it does not list any drives at all. I have a DVD burner and a bluray and a western digital 1TB hard drive connected. Sometimes they show that they are connected other times it doesn't. It's strange.
When it does recognize there are drives connected, I boot up from the Windows 7 DVD. Then I try to create a partition on the hard drive. The installation recognizes a 930GB hard drive with no partitions. Every time I try to create a partition, it says I need a driver for the hard drive. I have a driver that I downloaded off of HP's website yesterday, the driver for nvidia sata. I put it on my usb drive. It recognizes it but says it is the wrong driver. I don't know what else to do. I have built dozens of computer and repaired hundreds, but I have never run across a problem like this and I hope you can help me.

Thanks for your help, but that's exactly the driver I used. It didn't work.
My problem is not just with the hard drive. All three drives (two optical, one hard disk) should show up in bios, whether or not there is a disk in the optical drive or a partition on the hard drive. It intermittently stops detecting the drives. One time I boot and go into BIOS they are there, and I can run installation of Windows (partially). But if a turn off the computer and turn it back on, they've disappeared. Sometimes they will be detected, sometimes they won't.
I'm thinking the driver problem with the Windows 7 Professional x64 installation is somehow connected to the drives randomly not showing up. All drives stop showing up at the same time, not just the hard drive. So it's not a driver issue. It has to be connected to the BIOS and motherboard.
This computer is only 4 months out of warranty.
Any more help would be appreciated.

PSE12 does not recognize HP Photosmart C410 scanner

PSE12 does not recognize HP Photosmart C410 scanner.

TerranceD,
Did you install the latest software for that printer? The original CD does not support WIn 8.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108722-2&cc=us&dlc=en&lc=en...=
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Oracle vm 3.1.x : does not recognize local storage

Hi There
My VM manager does not recognize the local storage however I have a second HDD on my VM server:
[root@myserver ~]# fdisk -l
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 405 3148740 83 Linux
/dev/sda3 406 536 1052257+ 82 Linux swap / Solaris
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Also the Multipath is running:
[root@myserver ~]# service multipathd status
multipathd (pid 2735) is running...
[root@myserver ~]#
The version of OVM is 3.1.1.305
I have used the default partition layout.
I was able to create a server pool without the cluster option but there is no storage bind to it since I could not utilize the local storage and my NFS (which is on a IOMEGA DATA CENTRE external HDD) for some reasons gets timed out while I am adding the server pool with NFS ( NFS was added to the storage no problem but once I try to add a pool on this NFS it gets timesd out)
I am new to OVM and also Linux so please go easy on me :) , Your help is much appriciated.

Very likely "multipath -ll" doesn't show up any path to sdb from the device mapper (neither it is in /dev/mapper)
- Make sure you've rescanned disks from OVM Manager (Select the ovm server disks page) ;
- try to perform "multipath -d" to see if it takes the path from sdb into account. If it is, run "multipath" no option
- try to reboot the OVM server since it's not too late ;-)
Other than that I'm afraid you'll have to figure out why device mapper doesn't map your disk; the ovm server should have "script" install on it. Do the following :
cd /root
script figureoutwhyitsucks.log
multipathd -k
show config
<ctrl>+D
exit
That file would be helpful to figure out.

OVM 2.1.2 does not recognize SATA 150 or SATA 300 disks with Intel ICH10R

Similar Messages

Maybe you are looking for