OVM 3.2.8 - Migrating VM to different VMServer - Any downtime for VM?

If I migrate a VM from one VMServer to another manually, is there any hit at all on the VM environment?
i.e would a user even notice?
What about, in the event of VMServer host failure where HA is invoked?

It is, actually - and if you think about it, you'll likely immediately see, why this is the case and why no other vm cluster solution could possibly prevent this: the guest is defined - at runtime - by the contents of it's RAM and disk(s). While we can share disks between cluster nodes/vm servers, we actually do have seperated RAM spaces. This is why - in case of a live migration - the contents of the guest's RAM needs to be transferred to the new vm server, before a guest switchover can occur. Depending on the amount of (used) RAM of the guest and the transper speeds between the vm servers, this will take more or less time. In fact, first the guest's RAM will be copied to the target vm server and then, the guest will be temporarily suspended and a delta-transfer of the RAM will be applied, before the guest will continue to run on the other vm server.
If a vm server fails, all contents of a guest's RAM is lost and it cannot be restored - so a complete vm server failure must naturally be the same as a physical server failure…
Cheers.
budy

Similar Messages

How to migrate files from different databases to sharepoint 2013?

Hello everyone,
I need to migrate files of various formats from two databases to SharePoint 2013 ? How should I pursue? Please explain..
Scenario : Two different databases on different systems have loads of files. I need to migrate them to SharePoint?
Any suggestions/ Answers

Hi,
You need to copy the database into your network shared folder or SharePoint Server where you wanted to attach this content DB to your newly created web application.
Hope and Afraid,
Same Domain has been used. I mean if you move the content db from the server 1 which using the AD1 for authenticate the users,
So your new server 2 and web application must have configured to authenticate the AD 1 users.Otherwise user not found exception will be thrown.
If not still you can change the site collection administrator for the site which is migrated from the server 1.
Murugesa Pandian., SharePoint 2010 | MCPD | MCTS |Configure

My ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

my ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

iTunes never displays the iPod in the left pane?
iTunes is shipped with a "helper application" called the "iPod Service" that runs and is used by iTunes to communicate with the iPod device. This service may be disabled.
If your system is Microsoft Windows XP and you are logged in as an Administrator:
1. Quit iTunes and, if your iPod is currently connected to your computer, safely remove it using the system tray application to manage removable devices.
2. Right click on "My Computer"
3. Select "Manage"
4. In the "Computer Management" window, left pane (tree view), follow this path:
+Computer Management (local) > Services and Applications > Services+.
5. In the right pane, scroll down to "iPod Service" and double click it.
6. If the service is listed as "Disabled" and "Stopped," change to "Manual" and "Start" it. ("Manual" will cause it to start when iTunes starts and "Start" starts the service right now.)
7. Close "Computer Management"
8. Restart iTunes and wait for it to completely come up.
9. Reconnect your iPod.
Does your iPod show up in iTunes?

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How to manage different apple id's for icloud and itunes purchases and game center etc. ?

Hi
Myself and my brother have been sharing the same apple id for all the itunes purchases. We both have iphone 4. Since the introduction of icloud, we are little confused about the id managing process. Yesterday, we both updated our iOS to iOS 5. And, just after installing iOS 5, we were asked to enter apple id and password. We both entered the same id and password. Now both are iphones have overlapping contacts and other stuff.
Now, we have deciced that we want to make separate apple id's for ourselves i.e we want different apple id's for our iclouds (plus game center) and same apple id's for all our itunes purchases (if we are allowed to do that).
So now we have no idea how to do this after once entering the same id during iOS 5 installation. Any help would be greatly appreciated.
Thanks

If you're wanting to share content between multiple apple ids in the family I would suggest to use iTunes match.
http://www.apple.com/itunes/itunes-match/

Different number of rows for different columns in JTable

hi
I need to create a JTable with different number of rows for different columns...
Also the rowheight should be different in each column...
say there is a JTable with 2 columns... Col1 having 5 rows and column 2 having 2 rows...
The rowHeight in Col2 should be an integer multiple of Rowheight in Col1
how do I do this ??
can anybody send me some sample code ?????
thanx in advance

How about nesting JTables with 1 row and many columns in a JTable with 1 column and many rows.
Or you could leave the extra columns null/blank.
You could use a GridBagLayout and put a panel in each group of cells and not use JTable at all.
It would help if you were more specific about how you wanted it to appear and behave.

How to capture the different sold-to party for a single WBS Element

Hello,
The client wants to automatically populate the Partner field in the WBSE. The Sold-to party that is indicated in the Sales Order will be the same with the Partner Field in the WBSE. I would like to ask regarding on how can we capture the different sold-to party for a single wbs element, since in our project there is a system constraint where it is not possible to have multiple u2018sold tou2019 rows assigned to partner field in the WBSE.
Hoping for your suggestions and comments. Thanks in advance.
- Irica
Edited by: Irica Vaile Dalisay on May 25, 2011 3:45 PM

Try using the Customer Enhancement

Assign different ship to party for each material in a sales order in CRM?

Hi all,
I need to create a sales order in CRM, such that the sales order contains more than 100 materials at item level and each material should be shipped to a different ship to party.
That is for 100 materials in sales order I need to ship to 100 different customers.
The 100 ship to partyu2019s are maintained for the business partner in relation ships tab in /nBP.
The CRM configuration is done in such a way that when we enter a material while creating a sales order in CRM,u2026u2026.a window pops up asking us to select the ship to party for that material.
No I need to replicate this programmatically. I generated a sales order in CRM programmatically using BAPI_SLSTRANSACT_CREATEMULTI. u2026 Now I need to make changes such that I have a provision to assign ship to party for each materialu2026
How can I do this? Can any one tell me if there is a BAPI or Function Module available so that I can assign a different ship to party for each material in sales order?
Regards,
Jessica Sam

Here is sample code. In that highlighted portion is different. check this out
DATA: ls_partner TYPE crmt_partner_com,
        ls_input_fields TYPE crmt_input_field,
        lt_fieldname TYPE crmt_input_field_names_tab,
        ls_fieldname LIKE LINE OF lt_fieldname.
ls_partner-ref_handle = p_iv_handle.
ls_partner-ref_partner_handle = 1.
ls_partner-ref_kind = 'A'.
ls_partner-display_type = 'BP'.
ls_partner-no_type = 'BP'.
ls_partner-kind_of_entry = 'C'.
licensee
ls_partner-partner_fct = '00000069'.
ls_partner-partner_no = w_but000-partner.
INSERT ls_partner INTO TABLE gt_partner.
Bill to party
IF NOT w_con_header-billtoparty IS INITIAL.
    ls_partner-partner_fct = '00000003'.
    ls_partner-partner_no = w_but001-partner.
    INSERT ls_partner INTO TABLE gt_partner.
ENDIF.
IF w_con_header-billtoparty IS INITIAL.
    ls_partner-partner_fct = '00000003'.
    ls_partner-partner_no = w_but000-partner.
    INSERT ls_partner INTO TABLE gt_partner.
ENDIF.
Employee
ls_partner-partner_fct = '00000014'.
ls_partner-partner_no = w_con_header-empresp.
INSERT ls_partner INTO TABLE gt_partner.
+*lsinput_fields-ref_handle = p_iv_handle.*+_
+*lsinput_fields-ref_kind = 'A'.*+_
ls_input_fields-logical_key = ls_partner-ref_partner_handle.
ls_input_fields-objectname = 'PARTNER'.
ls_fieldname-fieldname = 'DISPLAY_TYPE'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'KIND_OF_ENTRY'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'NO_TYPE'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'PARTNER_FCT'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'PARTNER_NO'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_input_fields-field_names = lt_fieldname.
INSERT ls_input_fields INTO TABLE gt_input_fields.

Computer has different name than Itunes for Ipod Touch

I have an Ipod Touch 4th Generation 32gb. I have had no problems with it or with Itunes. My Mom came last Saturday to visit and she needed to charge her Ipod Touch so I hooked it to my computer where I always have a cord and charged it for about 45 minutes or so. I have no problem with my Ipod or with Itunes BUT when I go look at the device now on my computer,when it is connected to USB cord, it show "Marys Ipod" now instead of "Steves Ipod". In Itunes, it is still "Steves Ipod" and I can sync and all but I really want to get rid of "Marys Ipod" off my computer even though when I open it up, it is my ipod, just mislabed. I know because it has my pictures and her's is only 8gb. My Ipad2, is fine when I hook it up to the USB cord, It says "Steves Ipad" but when I hook my USB cord to my ipod touch, it still reads "Marys Ipod". Is this something I should be concerned about or is it not worth the hassle of trying to restore, etc? I have tried to change the name, but Windows won't allow. I do have Windows 7. I have also got the new update on Itunes and the new software(5.0) version.
I am stumped. I have googled this and have searched for over 3 hours today on how to fix this. Ready to bang my head against the wall. I have did a reboot on Ipod, I have restarted the computer. I have not reinstalled anything including Itunes.
Does anyone have any suggestions on what I can do? I would sure appreciate the help. Thanks in advance.

shellymoe
Currently Being Moderated Re: Computer has different name than Itunes for Ipod Touch
Jul 22, 2012 12:23 PM (in response to Toploader21120)
I just found the answer to this after hours of searching online. Make sure your iPod is hooked up to your computer & turned on.
Click on "Start" and in the search box type "regedit". This will display a program called "Registry Editor". Open it.
Click on the "Edit" tab and select "Find...". Type "Mary" in the search box and click "Find Next". It will bring up a list of everything that has "Mary" in it. (You may have to click on "Find next" under the "Edit" tab in order to find the associated items that have something to do with both "iPod" and "Mary".) What you need to pay attention to is not the NAME, but the DATA column. For me, the wrong iPod name was listed in 2 places in the data column. The actual names of those 2 items were "FriendlyName" and "Label".
Once you find the associated items that have to do with both the iPod and "Mary", right click on one of them. Select "Modify...". A box will open giving a "Value Name" box and a "Value Data" box. The "Value Data" box should say "Mary's iPod". All you have to do is change it to "Steve's iPod" and click "OK". Repeat the "Modify..." and renaming of the "Value Data" steps for every item that says something about "Mary's iPod".
Close the Registry Editor. Open "my computer" and see that it changed the name of your iPod back to "Steve's iPod".
Best Answer So far.....it really works...Thanks a million

Two different billing document types for 1 sales document type.

Hi Gurus,
I have a requirement , wherein our client is having counter sale.
He is using one sales doc type , and while creating a order , he is manually adding payment terms.
Requirement is , if the payment terms are cash, billing doc type created later on should be one , else during credit sales , billing document type should be different.
As per my understanding this is not possible.
Want to know if anyone has some different thought on this.
Thanks in advance
Nilesh.

Dear Nilesh,
There two options you can look in to
One option is
1.You can define different sales document types for cash and credit.
2. You can define two different billing documents.
3.Do the copy control settings for each combination
Cash sales order >Delivery>Cash invoice
Credit sales order >Delivery>Credit invoice
Second option is
1. You can maintain single sales document for both the processes.
2.Define two different billing types then do the copy control settings for both billing types.
But in this option user need to select the billing type manually based on the process while creating billing document.
I hope this will help you,
Regards,
Murali.

2 CF servers,but different remote object path for flash

I have 2 CF servers,but different remote object path for flex in each server.
Eg for one flex program in my dev server I define the remote object as follows
<mx:RemoteObject id="myService" destination="ColdFusion" source="cfide.flex.path_to_file" showBusyCursor="true">
But in my live sevrver I have to do this.
<mx:RemoteObject id="myService" destination="ColdFusion" source="path_to_file" showBusyCursor="true">
How can I make both the same?

Thanks mate,
I tried <use-mappings>true</use-mappings> and restarted the server but its still not working
I think this is the spoiler:
ColdFusion mappings apply only to pages processed by the ColdFusion Server with the cfinclude and cfmodule tags. If you save CFML pages outside of the Web root (or whatever directory is mapped to "/"), you must add a mapping to the location of those files on your server.
from
http://www.adobe.com/livedocs/coldfusion/5.0/Installing_and_Configuring_ColdFusion_Server/ basiconfig9.htm
so that ruins it for flex I guess?

How to handle different languages in Illustrator for big clients?

Hi Guys,
I need small suggestio for 'How to handle different languages in illustrator for big clients'. For instance; Arabic, this is a language which needs to be read from right to left instead of left to right. There are other strange languages as well (Cyrillic, Chinese etc.). It happens also that when you copy strange languages from a word file it will not be easy to paste it the correct way in a .ai file. Besides that, it’s also difficult to do a language check when we are not able to read it!. So, to make a long story short, I want to figure out how we can deal with multiple language circles?
Can you some please give me the solution for this...
Thanks in advance...
HARI

I take it you might come from an arabic background.
Here is how you can help yourself to some degree.
Google has a translation feature and service which is at the moment free. It is excellent.
Secondly if you are working with ME languages you really need the ME version of Illustrator or any other Creative Suites Application in order for it to work properly.
It, is also best to enable the language and the input for that language for your system on the Mac it is easy you go to the Language and text feature in theSystem Preferences, once enabled you can select the fro the menu bar under the American flag if you are in the US. Thst will appear once you have more than one language selected.
You select the language input you need and then a font for that language then paste and edit.
You need fonts on your computer that are of those languages as well.
How to manage this as a work flow well that is something you will have to work on yourself or hire a consultant who specializes in this area.
We had a few visit here when they have come across a snafu. So they exists.

Different Exchange Rate Type for Vendors and Customers Invoices

Dear Friends,
We have configured different exchange rate types for Accounts Payable and Accounts Receivable thru T Code OB07. What are the additional Config steps required to ensure that the respective buying and selling rates will apply to Accounts Payables and Receivables. We do not want to stipulate the exchange rate types in Document Types as this special exchange rates are applicable only for one of the Company Codes.
Would appreciate your help in this regard.
Regards,

Hi,
Then you can use a different document type for those company codes and can default the exchange rate type there.
OR,
The alternative wya is to use the substitution in OBBH/ GGB1 for those company codes with exit programming.
Regards,
SDNer

Utilizing different exchange rate type for same currency combination

Hello Gurus,
I wanted to get your opinion/experience in handling the following scenario.
We have company codes in different countries operating using different local currencies. There is alternate exchange rate type EURX defined for Exchange rate type M for many currency combinations due to business requirements. One country with local currency EUR is utilizing EURX SEK - EUR exchange rate combination.
Other country with local currency HUF is making use of exchange rate type MNB as an alternate exchange rate. In one of its transaction, where VAT is being calculated on its foreign transaction, HUF company is trying to seek rate of MNB SEK- EUR where country currency is SEK and document currency is EUR.
But since on the 'translation ratios for currency translation' table EURX being the alternate currency for that particular combination, even when we set MNB SEK EUR exchange rate, the system is obviously picks up EURX rate.
Has anyone come across similar scenario where different countries trying to get different exchange rate types for the same combination of currency? and If so, how would that be possibly handled through config or using something custom?
Thanks all for your replies in advance.
Regards,
Sagar K.

Hi Sagar,
In tcode OBBS, if Alt.exchange rate is used for any currency pair, then that rate is used ( EURX in this case).
All countries in EMU region uses EURX ( which is mostly fixed after introduction of EUR).
If the company is in different countries in Europe, then mostly EUR is used as Alt. exchange rate. which uses EUR as reference currency.
Ther is no country specific settings in std. sap for a currency pair.
Cheers,

Different exchange rate type for PO

Hi,
I have a requirement, where I need to take a different exchange rate type for one particular PO document type.
I have already maintained exchange rate type Z in Tcurr table.
I should enable system to pick this exchange rate for PO wich are created from a PO document type
Same exchange rate should be picked for GR and IR as well.
If I overwrite the PO exchange rate in PO header, GR and IR are picked default M exchange rate type.
If I maintain Z exchange rate for doc type WE and RE, the same would taken for all POs GR/IR.
I should make it available only for a PO document type and relevent GR/IRs.
Can you please advise how we can achieve this.
Your help in this regard is much appreciated.
Thanks,

Any Advise.

OVM 3.2.8 - Migrating VM to different VMServer - Any downtime for VM?

Similar Messages

Maybe you are looking for