OVM 3.x: cannot migrate guests from RAC to RAC

Hi, all.
I think I have the same problem as in this other thread:
OVM 3.0.2: cannot migrate guests to updates VM servers
But the maintenance mode is off.
Rac 1 and Rac 2 - Maintenance mode is off
Migrate from Rac 1 to Rac 2 - OK
Migrate from Rac 2 to Rac 1 - don't show up as possible migration Targets
Thank you.
Edited by: 901120 on 07/12/2011 14:47

Hi Shawn,
In the BW 7.0 release, it is not recommended to use export datasources for the myself datamart extraction. If possible you should use a DTP & a transformation.
Please see the attached Note 989757 for further info.
Rgds,
Colum
Edited by: Colum Cronin on Jun 11, 2009 1:47 PM

Similar Messages

Cannot migrate files from old MacBook to new MacBook Pro

I have been trying without success to migrate files from my old MacBook to my new one. The Migration Assistant doesn't work. The new Mac recognizes the old one but the old one cannot see the new one. The old MacBook has OS 10.5.8 and the new MacBook Pro has 10.8.1.
Then I tried migrating from my Time Machine backup, with the external drive still connected to the old MacBook, but it kept telling me I didn't have enough space to copy anything, even when I unchecked everything except my Documents folder.
I went to the Apple Store and one of their "geniuses" told me I could connect the external hard drive directly to the new MacBook Pro and migrate the files from there. That didn't work either; I got an error message about incompatible software.
The genius also told me that I could back up the new MacBook Pro to the same external hard drive with Time Machine that I'd been using and that I'd be able to restore from backups from either computer, but that's not true. I cannot see any backups on the drive except from the new computer. Time Machine does recognize that there is space in use on the drive but will not show me any of the content.
Does anyone know how I can migrate my files, short of copying them to a flash drive and doing it the old-fashioned way? Thank you!

It is possible to merge accounts but it is not easy nor foolproof. The easier solutions:
1. Remove the account made in Setup Assistant and change the username on the migrated account.
See Mac OS X- How to change user short name or home directory name.
See Macworld | Changing the short username in Leopard - use the last procedure, "The Full Monty."
2. Log into the migrated, renamed account and delete the account made in Setup Assistant, then re-migrate your data.

OMW cannot migrate data from MSAccess.

I am migrating MSAccess 2003 to Oracle 10g and it seems that all of the schema objects are created but there is the following error when trying to move the data.
"Unable to migrate data from source table lkpDrugs to destination table RecruitTracking_be.LKPDRUGS :
[Microsoft][ODBC Microsoft Access Driver] Could not find file "(unknown)"."
The MSAcess data gets modified to connect to oracle but there is no data.
I have tried to install the Oracle ODBC Driver through the universall installer but I can't find the "projects.jar" file that I am supposed to point to in the unzip directory.
I currently have two data sources defined using "Microsoft Access Driver (*.mdb)" and "Microsoft ODBC for Oracle"
The other problem that I am having is that I am not sure what to enter into the feilds Username, Password and ODBC Data Source when the modiy access database screen comes up.

Hi Terry,
I will attempt to address each of the issues that you have mentioned in your post.
1. In reference to your "Could not find file "(unknown)"." issue, it sounds like your MS Access ODBC DSN "omwb_msaccess" isn't correctly configured.
Please refer to Chapter 4 "Troubleshooting" of the Microsoft Access Reference Guide, which can be accessed via the Help menu item on the workbench. There's a section called "Migrating Table Data Using Microsoft Access ODBC Data Source", which outlines the steps you will need to follow to set up your environment correctly. This should resolve your issue.
2. In reference to your Oracle ODBC driver installation issue, the latest version of the driver contains a "products.xml" file and not a "products.jar" file as mentioned in its readme file. To successfully install the latest version (10.1.0.3.1) of the Oracle ODBC driver, available for download from OTN at the following location - http://www.oracle.com/technology/software/tech/windows/odbc/index.html - you need to ensure that you are using Oracle Universal Installer v10g. Once you have downloaded the "odbc101031.exe", extract its contents to a local folder on your machine e.g c:\temp. Launch the 10g Universal Installer and select the "products.xml" file from the \ODBC101031\Disk1\stage folder you extracted. You should now be able to successfully install the driver.
3. You mention that you are unsure what connection information to supply in the ODBC DSN. Firstly, ensure that once you have successfully installed the Oracle ODBC driver, you set up an Oracle ODBC DSN on your machine. This DSN will be the one you use in order to modify your MS Access MDB file using the workbench. Secondly, please go to Help | Microsoft Access Reference Guide on the menu bar of the workbench. Refer to Chapter 2 "Migration Process", specifically the section "ODBC Connection Issues with Linked Tables". This section gives information on what user to use.
I hope this helps.
Regards,
Hilary

Cannot migrate data from Microsoft Outlook 2013

I'd very much like to use Thunderbird, however once it is installed and I try to import my Outlook 2013 data (contacts, folders, etc.) I receive this message:
"Either there is no default mail client or the current mail client cannot fulfill the message request. Please run Microsoft Outlook and set it as the default mail client."
I have followed all the steps I found online to ensure Outlook is in fact my default client, but the message persists. I have searched for Add-Ons and have come up empty. I am running Windows 8.1.
I'm not going to switch over to Thunderbird if it can't do something as simple as move my data from one program to another on the same computer.

First you have to export your data from Outlook
then you can import them in Tbird.
[https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools ImportExportTools] is an addon that can help you.
Here is some help http://kb.mozillazine.org/Import_from_Outlook_Express

Is there a way to migrate files from 10.4.11 to a new Macbook Pro?

I want to buy a new Macbook pro, and want to transfer important files from my old iBook G4. The folks at our Apple Store tell me I cannot migrate data from 10.4.11 to the new operating system. Is there any way to do it?

Hello,
A new MacBook Pro may not allow the same applications to be installed (if they are PPC specific applications)
Other applications will be updated to the current release.
The easiest way for you to transfer your personal files (not applications) is to use a USB pen drive or USB external drive.
Copy all your content to the USB drive and then from your USB drive to your MacBook Pro.
There are other ways to do this without a USB drive.
If your on the same wireless network you could setup file share between the two Macs and then copy files from one to another. (I've done this between my MacBook Pro and PowerBook) then it would be a simple case of dragging files from your iBook to your MacBook Pro over the same network.
You could use a cross over Ethernet cable and run a cable between the two macs.
Your new MacBook Pro may need an thunderbolt to Ethernet adapter to do that.
USB Drive would be easier and they don't cost a lot.
Best of luck

I just migrated everything from an old Mac to a new one, but now Acrobat Professional will not launch. I get an error message: "Adobe Acrobat 8 Professional cannot be launched at this time......"

I just migrated everything from an old Mac to a new one, but now Acrobat Professional will not launch. I get an error message: "Adobe Acrobat 8 Professional cannot be launched at this time......"

I used "Migration Assistant" to send everything from my old mac to my new which included my copy of Adobe Acrobat 8 Professional. I tried downloading an update but when it asked me to find the version of acrobat to replace it was grayed out and I was unable to select it. My OS is 10.9.4

How to migrate DB from single node 10gR2 to RAC 11gR2 on diff platform?

How to migrate DB from single node 10gR2 to RAC 11gR2 on different platform with possible minimum downtime? We have a situation of upgrade/migrate oracle 10gR2 single instance DB to 2-node RAC 11gR. The source OS is Solaris 10 on SPARC and the target OS is Linux (the target servers could be changed to Solaris 11 x86 if needed). What is the best solution on that?
Thanks,

Technically, can do the following for upgrading and migration?
1. Create 11gR2 oracle home on the same server and upgrade the database from 10gR2 to 11gR2 by running conversion (2 hour down time?)
2. Set up Heterogeneous Primary and Physical Standbys by RMAN. The standby is the RAC with ASM. No need down time. (from Solaris Space to Linux - this may be a problem)
3. At the cutoff time, activate the standby DB from the RAC ASM.
If feasible, do we have some detail guild line for each step?

CPU Jul-09 Installation - Error Cannot copy file from 'libjox10.so' to

Hi All, I received this error while I was installing the last CPU on a 10.2.0.4 Oracle Instance running on a HP-UX Itanium System:
Patch 8568398:
Copy Action: Desctination File "/u02/app/oracle/product/10.2/Db_1/lib/libjox10.so" is not writeable.
'oracle.rdbms, 10.2.0.4.0': Cannot copy file from 'libjox10.so' to '/u02/app/oracle/product/10.2/Db_1/lib/libjox10.so'
I checked metalink' site with no similar results found.
Could anybody help me?
Should I run /usr/sbin/slibclean and remove the last patch (Patch 8568398) and then try again?
This is the complete log...
$ opatch version
Invoking OPatch 10.2.0.4.7
OPatch Version: 10.2.0.4.7
OPatch succeeded.
$ sqlplus /nolog
SQL*Plus: Release 10.2.0.4.0 - Production on Fri Jul 17 16:29:29 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
$ lsnrctl stop
LSNRCTL for HPUX: Version 10.2.0.4.0 - Production on 17-JUL-2009 16:32:29
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=Hostname)(PORT=1521)))
The command completed successfully
$ emctl stop dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://hostname:1158/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
... Stopped.
$unzip p8534387_10204_HPUX-IA64.zip
<...>
$ cd 8534387
$ opatch napply -skip_subset -skip_duplicate
Invoking OPatch 10.2.0.4.7
Oracle Interim Patch Installer version 10.2.0.4.7
Copyright (c) 2009, Oracle Corporation. All rights reserved.
UTIL session
Oracle Home : /u02/app/oracle/product/10.2/Db_1
Central Inventory : /u02/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.4.7
OUI version : 10.2.0.4.0
OUI location : /u02/app/oracle/product/10.2/Db_1/oui
Log file location : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2 009-07-17_16-38-05PM.log
Patch history file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_ history.txt
Invoking utility "napply"
Checking conflict among patches...
Checking if Oracle Home has components required by patches...
Checking skip_duplicate
Checking skip_subset
Checking conflicts against Oracle Home...
OPatch continues with these patches: 7155248 7155249 7155250 7155251 7155252 7155253 7155254 7197583 7375611 7375613 7375617 7609057 7609058 8309587 8309592 8309623 8309632 8309637 8309642 8534387 8568395 8568397 8568398 8568402 8568404 8568405
Do you want to proceed? y
y
User Responded with: Y
Running prerequisite checks...
Prerequisite check "CheckApplicable" failed.
The details are:
Patch 8568398:
Copy Action: Desctination File "/u02/app/oracle/product/10.2/Db_1/lib/libjox10.so" is not writeable.
'oracle.rdbms, 10.2.0.4.0': Cannot copy file from 'libjox10.so' to '/u02/app/oracle/product/10.2/Db_1/lib/libjox10.so'
UtilSession failed: Prerequisite check "CheckApplicable" failed.
$ opatch lsinventory -detail
Invoking OPatch 10.2.0.4.7
Oracle Interim Patch Installer version 10.2.0.4.7
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home : /u02/app/oracle/product/10.2/Db_1
Central Inventory : /u02/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.4.7
OUI version : 10.2.0.4.0
OUI location : /u02/app/oracle/product/10.2/Db_1/oui
Log file location : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_17-53-30PM.log
Patch history file: /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_history.txt
Lsinventory Output file location : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/lsinv/lsinventory2009-07-17_17-53-30PM.txt
Installed Top-level Products (2):
Oracle Database 10g 10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
There are 2 products installed in this Oracle Home.
Installed Products (190):
Agent Required Support Files 10.2.0.1.0
Agent Required Support Files Patch 10.2.0.4.0
Assistant Common Files 10.2.0.1.0
Assistant Common Files Patch 10.2.0.4.0
Bali Share 1.1.18.0.0
Buildtools Common Files 10.2.0.1.0
Character Set Migration Utility 10.2.0.1.0
Character Set Migration Utility Patch 10.2.0.4.0
Database Configuration and Upgrade Assistants 10.2.0.1.0
Database Configuration and Upgrade Assistants Patch 10.2.0.4.0
Database SQL Scripts 10.2.0.1.0
Database SQL Scripts Patch 10.2.0.4.0
Database Workspace Manager 10.2.0.1.0
Database Workspace Manager 10.2.0.4.0
DBJAVA Required Support Files 10.2.0.1.0
DBJAVA Required Support Files Patch 10.2.0.4.0
Enterprise Edition Options 10.2.0.1.0
Enterprise Manager Agent Core 10.2.0.1.0
Enterprise Manager Agent Core Patch 10.2.0.4.0a
Enterprise Manager Agent DB 10.2.0.1.0
Enterprise Manager Agent DB 10.2.0.4.0
Enterprise Manager Baseline 10.2.0.1.0
Enterprise Manager Baseline 10.2.0.4.0
Enterprise Manager Common Core Patch 10.2.0.4.0a
Enterprise Manager Common Files 10.2.0.1.0
Enterprise Manager Minimal Integration 10.2.0.1.0
Enterprise Manager plugin Common Files 10.2.0.1.0
Enterprise Manager plugin Common Files 10.2.0.1.0
Enterprise Manager plugin Common Files Patch 10.2.0.4.0
Enterprise Manager Repository Core 10.2.0.1.0
Enterprise Manager Repository Core patch 10.2.0.4.0a
Enterprise Manager Repository DB 10.2.0.1.0
Enterprise Manager Repository DB 10.2.0.4.0
Generic Connectivity Common Files 10.2.0.1.0
Generic Connectivity Common Files Patch 10.2.0.4.0
HAS Common Files 10.2.0.1.0
HAS Common Files Patch 10.2.0.4.0
HAS Files for DB 10.2.0.1.0
HAS Files for DB Patch 10.2.0.4.0
Installation Common Files 10.2.0.1.0
Installation Common Files Patch 10.2.0.4.0
Installer SDK Component 10.2.0.4.0
iSQL*Plus 10.2.0.1.0
iSQL*Plus 10.2.0.4.0
Java Runtime Environment 1.4.2.14.0
JDBC Common Files 10.2.0.1.0
JDBC Common Files 10.2.0.4.0
LDAP Required Support Files 10.2.0.1.0
LDAP Required Support Files Patch 10.2.0.4.0
OLAP SQL Scripts 10.2.0.1.0
OLAP SQL Scripts Patch 10.2.0.4.0
Oracle Advanced Security 10.2.0.1.0
Oracle Advanced Security Patch 10.2.0.4.0
Oracle Call Interface (OCI) 10.2.0.1.0
Oracle Call Interface (OCI) Patch 10.2.0.4.0
Oracle Clusterware RDBMS Files 10.2.0.1.0
Oracle Clusterware RDBMS Files Patch 10.2.0.4.0
Oracle Code Editor 1.2.1.0.0I
Oracle Configuration Manager 10.2.7.1.0
Oracle Containers for Java 10.2.0.1.0
Oracle Containers for Java 10.2.0.4.0
Oracle Core Required Support Files 10.2.0.1.0
Oracle Core Required Support Files Patch 10.2.0.4.0
Oracle Data Mining RDBMS Files 10.2.0.1.0
Oracle Data Mining RDBMS Files Patch 10.2.0.4.0
Oracle Database 10g 10.2.0.1.0
Oracle Database 10g 10.2.0.1.0
Oracle Database 10G 32 bit 10.1.0.2.0
Oracle Database 10g interMedia Files 10.2.0.1.0
Oracle Database 10g interMedia Files Patch 10.2.0.4.0
Oracle Database 10g Patch 10.2.0.4.0
Oracle Database 10g Patch 10.2.0.4.0
Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0
Oracle Database User Interface 2.2.13.0.0
Oracle Database Utilities 10.2.0.1.0
Oracle Database Utilities Patch 10.2.0.4.0
Oracle Display Fonts 9.0.2.0.0
Oracle Enterprise Manager Console DB 10.2.0.1.0
Oracle Enterprise Manager Console DB 10.2.0.4.0
Oracle Extended Windowing Toolkit 3.4.38.0.0
Oracle Globalization Support 10.2.0.1.0
Oracle Globalization Support Patch 10.2.0.4.0
Oracle Help For Java 4.2.6.1.0
Oracle Help for the Web 1.1.10.0.0
Oracle Ice Browser 5.2.3.6.0
Oracle interMedia 10.2.0.1.0
Oracle interMedia Annotator 10.2.0.1.0
Oracle interMedia Client Option 10.2.0.1.0
Oracle interMedia Client Option Patch 10.2.0.4.0
Oracle interMedia Java Advanced Imaging 10.2.0.1.0
Oracle interMedia Java Advanced Imaging Patch 10.2.0.4.0
Oracle interMedia Locator 10.2.0.1.0
Oracle interMedia Locator Patch 10.2.0.4.0
Oracle interMedia Locator RDBMS Files 10.2.0.1.0
Oracle interMedia Locator RDBMS Files Patch 10.2.0.4.0
Oracle interMedia Patch 10.2.0.4.0
Oracle Internet Directory Client 10.2.0.1.0
Oracle Internet Directory Client Patch 10.2.0.4.0
Oracle Java Client 10.2.0.1.0
Oracle Java Client Patch 10.2.0.4.0
Oracle JDBC Thin Driver for JDK 1.2 10.2.0.1.0
Oracle JDBC Thin Driver for JDK 1.2 Patch 10.2.0.4.0
Oracle JDBC Thin Driver for JDK 1.4 10.2.0.1.0
Oracle JDBC Thin Driver for JDK 1.4 Patch 10.2.0.4.0
Oracle JDBC/OCI Instant Client 10.2.0.1.0
Oracle JDBC/OCI Instant Client Patch 10.2.0.4.0
Oracle JFC Extended Windowing Toolkit 4.2.33.0.0
Oracle JVM 10.2.0.1.0
Oracle JVM Patch 10.2.0.4.0
Oracle LDAP administration 10.2.0.1.0
Oracle LDAP administration patch 10.2.0.4.0
Oracle Locale Builder 10.2.0.1.0
Oracle Message Gateway Common Files 10.2.0.1.0
Oracle Message Gateway Common Files Patch 10.2.0.4.0
Oracle Net 10.2.0.1.0
Oracle Net Listener 10.2.0.1.0
Oracle Net Listener Patch 10.2.0.4.0
Oracle Net Patch 10.2.0.4.0
Oracle Net Required Support Files 10.2.0.1.0
Oracle Net Required Support Files Patch 10.2.0.4.0
Oracle Net Services 10.2.0.1.0
Oracle Notification Service 9.0.4.0.0
Oracle Notification Service Patch 10.2.0.4.0
Oracle OLAP 10.2.0.1.0
Oracle OLAP API 10.2.0.1.0
Oracle OLAP API Patch 10.2.0.4.0
Oracle OLAP Patch 10.2.0.4.0
Oracle OLAP RDBMS Files 10.2.0.1.0
Oracle OLAP RDBMS Files Patch 10.2.0.4.0
Oracle One-Off Patch Installer 10.2.0.4.0
Oracle Partitioning 10.2.0.1.0
Oracle Partitioning Patch 10.2.0.4.0
Oracle Programmer 10.2.0.1.0
Oracle RAC Required Support Files-HAS 10.2.0.1.0
Oracle RAC Required Support Files-HAS Patch 10.2.0.4.0
Oracle Real Application Testing 10.2.0.4.0
Oracle Recovery Manager 10.2.0.1.0
Oracle Recovery Manager Patch 10.2.0.4.0
Oracle Required Support Files 32 bit 10.2.0.0.0
Oracle Required Support Files 32 bit Patch 10.2.0.4.0
Oracle Spatial 10.2.0.1.0
Oracle Starter Database 10.2.0.1.0
Oracle Starter Database Patch 10.2.0.4.0
Oracle Text 10.2.0.1.0
Oracle Text Patch 10.2.0.4.0
Oracle UIX 2.1.22.0.0
Oracle Universal Installer 10.2.0.4.0
Oracle Wallet Manager 10.2.0.1.0
Oracle Wallet Manager Patch 10.2.0.4.0
Oracle XML Development Kit 10.2.0.1.0
Oracle XML Development Kit Patch 10.2.0.4.0
Parser Generator Required Support Files 10.2.0.1.0
Perl Interpreter 5.8.3.0.1
Perl Interpreter Patch 5.8.3.0.1a
PL/SQL 10.2.0.1.0
PL/SQL 10.2.0.4.0
PL/SQL Embedded Gateway 10.2.0.1.0
PL/SQL Embedded Gateway Patch 10.2.0.4.0
Platform Required Support Files 10.2.0.1.0
Platform Required Support Files 10.2.0.4.0
Precompiler Common Files 10.2.0.1.0
Precompiler Common Files Patch 10.2.0.4.0
Precompiler Required Support Files 10.2.0.1.0
Precompiler Required Support Files Patch 10.2.0.4.0
RDBMS Required Support Files 10.2.0.1.0
RDBMS Required Support Files for Instant Client 10.2.0.1.0
RDBMS Required Support Files for Instant Client Patch 10.2.0.4.0
RDBMS Required Support Files Patch 10.2.0.4.0
regexp 2.1.9.0.0
Required Support Files 10.2.0.1.0
Sample Schema Data 10.2.0.1.0
Sample Schema Data Patch 10.2.0.4.0
Secure Socket Layer 10.2.0.1.0
Secure Socket Layer Patch 10.2.0.4.0
SQL*Plus 10.2.0.1.0
SQL*Plus 10.2.0.4.0
SQL*Plus Required Support Files 10.2.0.1.0
SQL*Plus Required Support Files Patch 10.2.0.4.0
SQLJ Runtime 10.2.0.1.0
SQLJ Runtime Patch 10.2.0.4.0
SSL Required Support Files for InstantClient 10.2.0.1.0
SSL Required Support Files for InstantClient Patch 10.2.0.4.0
Sun JDK 1.4.2.17.0
Sun JDK extensions 9.2.0.1.0
XDK Required Support Files 10.2.0.1.0
XDK Required Support Files Patch 10.2.0.4.0
XML Parser for Java 10.2.0.1.0
XML Parser for Java Patch 10.2.0.4.0
XML Parser for Oracle JVM 10.2.0.1.0
XML Parser for Oracle JVM Patch 10.2.0.4.0
There are 190 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
$
$ more /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch_history.txt
Date & Time : Fri Jul 17 16:02:17 GMT-03:00 2009
Oracle Home : /u02/app/oracle/product/10.2/Db_1
OPatch Ver. : 10.2.0.4.7
Current Dir : /u02/app/oracle/product/10.2/Db_1
Command : -v
Log File : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_16-02-17PM.log
Date & Time : Fri Jul 17 16:38:05 GMT-03:00 2009
Oracle Home : /u02/app/oracle/product/10.2/Db_1
OPatch Ver. : 10.2.0.4.7
Current Dir : /home/ora10g/8534387
Command : napply -skip_subset -skip_duplicate
Log File : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_16-38-05PM.log
Date & Time : Fri Jul 17 17:53:30 GMT-03:00 2009
Oracle Home : /u02/app/oracle/product/10.2/Db_1
OPatch Ver. : 10.2.0.4.7
Current Dir : /home/ora10g/8534387
Command : lsinventory -detail
Log File : /u02/app/oracle/product/10.2/Db_1/cfgtoollogs/opatch/opatch2009-07-17_17-53-30PM.log
$
Please let me know if you need more info.
Regards, and thanks in advance!
Martin

You were right. It was a permissions issue:
hostname:/root# ls -ltr /u02/app/oracle/product/10.2/Db_1/lib/libjox10.so
-r-xr-xr-x 1 ora10g oinstall 20041728 Apr 23 2008 /u02/app/oracle/product/10.2/Db_1/lib/libjox10.so
Thanks.
damorgan wrote:
"is not writeable." means one of two things.
1. It does not exist.
2. Permissions are not set correctly.
Determining which it is ... that is the first step.

Error while migrating reports from one instance to another(no torch seen)

Hi,
I am facing this problem when I am trying to migrate reports from UAT to Production. After migration when I try to run the report from Discoverer plus, I cannot see the torch symbol which is general if we have any parameters for that report. So, I again migrate the same .eex file and now I see the torch.
Can any one throw some thoughts why is this happening, why I cannot see the torch symbol in the first time itself?
Thanks,
Srini.

Hi Srini
The list of values is not being associated with the item the first time around. The order in which the items are selected is important so for example if lists of values were imported first without the items upon which they depend they will be ignored. Running the import a second time will cause the LOVs to recognize their associated item and thus the association will be made.
Generally I do two exports. I will export my folders and workbooks first and then export my item classes.
Hope this helps explain what you are seeing.
Best wishes
Michael

Webi report: Issue Cannot retrieve dimensions from Cube

Hello Experts, We're facing an issue with a partical set of Webi reports in Quality environment. The reports are BW reports based on OLAP BICS connectivity on top of Bex queries.y Below is the scenario and the issue: 1. The backed Bex queries have been trasported to Quality BW system and they're running fine when run from RSRT or Bex analyzer. 2.The Webi reports along with the BICS connections have been migrated to the Quality box and the BICS connections have been editied so that they point to the Quality BOX bex queries and they're testing and responding to the connection successfully. 3. The Webi reports pointed to the Dev Box in the Dev BOBJ system are working fine, but when the same reports for which the connections were repointed in Quality as above, are giving the error "Cannot Retrieve Dimensions from Cube". Steps taken: a. Deleted the reports and the BICS connection from Quality environment and remigrated the reports,connecitons and changed the connecitons but still the issue persists. b.Tried finding the root cause and got the following issue in the Bex query in Quality: There are filters put in the Bex query . All other filters are working fine except 0CALMONTH. We tried putting all sorts of variables on 0CALMONTH, but the moment a variable is put on 0CALMONTH, this issue occurs. But when we tried removing the variable from 0CALMONTH in filters and restricted it to a single value, the Report works fine. However the same is not an issue in the Dev Box and all queries with similar variables are working fine. So we're thinking this might be an issue on the BW backend and the cube might have to be transported again to the Quality Box. ANy quick suggestions or inputs on this would be greatly appreciated. Thanks and regards, Abhishek

Hi Abhishek,
I am facing same issue.Have you resolve this issue?
Regards,
Rajesh

Reasons Adobe should write a migration manual from FH to AI

what my friend wrote me...
About FHMX, how about educating people why Freehand is so
much better than
ill, and publishing a migration guide from ill to Freehand.
Maybe you and I
can join Adobe and implement this program! As a matter of
fact I've already
written the introduction to the guide.
Top reasons why I love using Freehand MX over Illustrator for
the work we
do. Try it, and you'll like it too.
•Gouping and ungrouping is time consuming in ill. If an
object on the bottom
is grouped, the whole group is selected. Selecting the bottom
object is
useless unless you ungroup all. Very time consuming.
Freehand can select one element even if it's part of a group.
• It is common in ill & FHMX to hold down shift
while clicking on objects to
select several at a time. ill has a tendency to 'pick up'
& move those
objects as your moving from one to the other. Which means
having to back up
your last step and then continue.
•• ill select/same/stroke colour, fill colour
etc. VS FHMX 'find & replace'
In ill available only 'document wide' which forces you to
take the selection
and place it in a new document (usually a temporary measure
ill forces upon
you).
All this copying takes extra time when the art is complex.
Since changing colours is often the goal, opening a new
document means
having to drag into the new doc, all the colours you'll be
needing to
change.
Also when choosing same fill & stroke colour, ill doesn't
catch everything,
so you have to try several times to get everything.
FHMXs 'find & replace' runs on whatever you select,
without requiring
copying
the info to a new document, so there is no waiting like in
ill. And it
catches everything all in one shot. Wham, bam thank you maam.
FHMXs 'find &
replace' light years ahead of ill.
• Multiple page documents
FHMX multi page documents can be of different sizes and
orientation within a
single document. Ill must have the same size and orientation.
Ill allows only one page size & page format while FHMX
permits you to use
any combo within the same document, all with the click of a
button. Job's
done.
ill: go into doc setup and calculate new overall width.
"let's see I need 5 pages of 8.5x11 so that's 8.5" x 5 pages
=42.5" width.
If you add a page, all the doc info gets shifted off center.
Ill requires
you to select all, (make sure nothing is locked!) and
recenter all the
pages. All time consuming and unnecessary in FHMX.
Ill can't handle multiple pages when it come time to print
them all. In
order to be able to print an 8 page document with simple
vector art (without
any linked files) in illustrator, it was necessary to convert
the document
to 8 single page documents. Each page took 5 minutes , 40 min
total.
FHMX prints multiple page documents with no hesitation.
••ill has no collect for output. This is
ridiculous. FHMX enables you to
enjoy creating freely without having to think of where that
tiff you just
imported came from. When the art is finished in FH, click
'collect for
output' and in under 5 seconds a complete folder is created
of everything
you need to backup that artwork.
Never spend one second looking for anything again when
opening a freehand
document. Not today, not tomorrow, or in three months.
In ill, after the art is done, you need to spend the time
looking for those
linked files, to gather them into a folder. And when a
deadline is so
important, will you actually take the time? NO! So days,
weeks, or months
later, when you need to open the file and the tiff is
missing, well, I hope
you like treasure hunts, because with time tiffs can be moved
or go missing.
With this one feature, FH saves hours of time per year over
ill.
•Pathfinder/combine in ill is slow ad often crashes the
program. (See next
point) Freehand unite is Fast!. ill requires you to ungroup
all elements
before using the filter. FHMX doesn't.
••Paste inside.
FHMX enables you to use garment sketches without modifying
shapes to
accommodate a tiff pasted inside. Tons less work over ill.
'Paste inside' in
FHMX is fast & effortless, encouraging you to paste
inside each individual
shape of the garment. (Ex. Belt loops, waistband, pockets,
body. All get
their own tiff pasted inside.) This gives the artist freedom
over each
individual tiff. Changes can be applied in light/dark or
angle to each tiff
seperatly from one another.
Ill cannot do this without a massive investment in time, it
doesn't even
compare with the ease of FHMX. ill method is also a pain to
work with ,
requiring you to lock/unlock items as the masks bounding box
is often in the
way. This requires you to lock nearby elements in order
select. Very
annoying. This work around is so time consuming it
discourages you to paste
inside individual shapes. In fact it's impractical to do so.
You're forced
to combine all shapes and paste one tiff into this one
overall shape, which
is time consuming because it increase your workload to
achieve a lesser
result.
Ill requires you to draw a duplicate shape which must lie in
perfect
register with the shape underneath it. Shapes are often
composed of highly
complex components (ex:text) that need to be united into one
overall shape,
to paste into. Often these complex shapes crash illustrators
unite filter,
making the job time consuming or impossible. FHMX requires
none of this
workaround, because FHMX enables you to past into individual
shapes.
FHMX can even paste inside a paste inside, and in easily
accesible layers,
creating realistic effects. Don't even dream of doing this in
ill.
•ill toolbox. The 'Venus' girl at the top of the box is
often clicked in
error resulting in an annoying 'Adobe online' dialogue box
appearing. So
annoying! Bury this feature elsewhere, or at least move it
away from the two
arrow tools, the two most used tools of the whole program!
Stop interrupting
workflow!
•Ill locking unlocking frenzy
You'd like to add a point to a path. In FHMX, select the path
and click on
it
with the pen tool. You're done.
In ill, select the path and click on it with the pen tool +.
But ill adds
the point to the path in front, even though you selected the
one in back!
Ill forces you to lock the front path to get to the rear
path. If your
artwork has many layered paths, get ready to go on the usual
locking frenzy
until you get to the path you need. All this just to add a
point.
As an added bonus, ill often throws the "Can't add an anchor
point. Please
use the add anchor point tool on a segment of a path"
dialogue box in your
face, as if you can't aim a point on a path.
Paste inside
• Because paste inside in ill is so complicated, a
common workaround is to
create a pattern swatch to achieve the same ease as in FHMX.
However pattern
swatches are simple vector paths that can't match the
subtlety of a tiff.
When opening a new document, swatches have to be brought in
to the new
document to be used.. When changing a pattern colour, a new
swatch has to be
created, which is more time consuming than changing the tiff
colour in FHMX.
5 seconds vs. 5 minutes
• The arrow+ tool in Ill selects in increments of one
group at a time. FHMX
selects in increments of one element at a time, giving the
user greater
control over elements within groups.
• In Ill before using Pathfinder/Unite, you should
save, because pathfinder
tool often crashes the program. Since large documents take
time to save,
waiting time in Ill multiplies. FHMX doesn't crash when using
the pathfinder
tool so much time and frustration is saved.
Sometimes Pathfinder in Ill just won't work the way it's
expected to. I wind
up importing the art into FHMX where it works fine and
instantly.

I think what Morty said needs to be reminded here:
quote:
quote:
Should we read anything into Adobe putting out the Freehand
to
Illustrator migration guide you posted about?
No, that's something that Adobe has planned for quite some
time. I hinted to its release several months back when we were all
discussing how Adobe should produce such a document. This "rumor"
that I refer to is something that surprised me as well. I have yet
to confirm it though...
Mordy
Since Adobe was planning this for some time, let's not jump
to conclusions. Mordy did confirm to us that there is indeed a
Product Manager for FreeHand. Also, it's interesting to note that
Adobe has a different situation on their hands than they did with
Pagemaker. What we have is two competing (?) programs, FH and Illy,
they are both truly loved by their devoted users. Adobe probably
realizes that they gave to keep both because the users of either
program have been devoted for years. Neither Illy or FH users would
be happy about migrating. Adobe I'm sure will keep both programs
(at least I'm hoping they are smart enough to). When Adobe migrated
Pagemaker users to InDesign, InDesign was a new tool. Illy is old
like FH...you ca't force a migration to a tool that is just as old
as the one your migrating from.

Ise 1.2, cannot access guest portal

I upgraded from 1.1.4 patch 3 to 1.2 but cannot access guest portal anymore nor with FQDN:8443 nor with IP:8443
any idea?

I had attached the steps to configure the guest portal and hope will address the problem.
Configuring the Guest Portal
Adding a New Guest Portal You must configure settings for the Guest portal before allowing guests to use it to access the network. Some settings apply globally to all Guest portals and other require you to set them for each portal individually.
You can add a new Guest portal or edit an existing one.
Step 1Choose Administration > Web Portal Management > Settings > Guest > Multi-Portal Configurations.
Step 2Click Add.
Step 3Update the fields on each of these tabs:
•General—enter a portal name and description and choose a portal type.
•Operations—enable the customizations for the specific portal
•Customization—choose a language template for displaying the Guest portal with localized content
•File Uploads—displays only if you have chosen a portal type requiring you to upload custom HTML files.
•File Mapping— identify and choose the HTML files uploaded for the particular guest pages. Displays only if you have chosen a portal type requiring you to upload custom HTML files.
•Authentication—indicate how users should be authenticated during guest login.
Step 4Click Submit.
Specifying Ports and Ethernet Interfaces for End-User Portals
You can specify the port used for each web portal allowing you to use different ports for the end-user portals: Sponsor, Guest (and Client Provisioning), My Devices, and Blacklist portals. The Client Provisioning portal uses ports 8905 and 8909 for posture assessments and remediation, which you cannot change. Otherwise, it uses the same ports assigned to the Guest portal.
You can also partition portal traffic to specific Gigabit Ethernet interfaces. For example, you might not want the Admin portal (which always uses GigabitEthernet 0) available on the same network as guest users or employee devices.
Step 1Choose Administration > Web Portal Management > Settings > General > Ports.
Step 2Enter the port value in the HTTPS Port field for each portal. By default, the Sponsor, Guest, My Devices portals use 8443, and the Blacklist portal uses port 8444.
Step 3Check the Gigabit Ethernet interfaces you want to enable for each portal.
Step 4Click Save.
If you have changed the port settings, all nodes (Administration, Policy Services, and Monitoring) restart automatically, which may take several hours to complete.
Tips for Assigning Ports and Ethernet Interfaces
•All port assignments must be between 8000-8999. This port range restriction is new in Cisco ISE 1.2. If you upgraded with port values outside this range, they are honored until you make any change to this page. If you make any change to this page, you must update the port setting to comply with this restriction.
•You must assign the Blacklist portal to use a different port than the other end-user portals.
•Any portals assigned to the same HTTPS port also use the same Ethernet interfaces. For example, if you assign both the Sponsor and My Devices portals to port 8443, and you disable GigabitEthernet 0 on the Sponsor portal, that interface is also automatically disabled for the My Devices portal.
•You must configure the Ethernet interfaces using IP addresses on different subnets. Refer to these guidelines to help you decide how best to assign ports and Ethernet interfaces to the end-user portals:
Specifying the Fully Qualified Domain Name for Sponsor and My Devices Portals
You can set the Sponsor and My Devices portals to use an easy-to-remember fully-qualified domain names (FQDN), such as: mydevices.companyname.com or sponsor.companyname.com. Alternatively, Cisco ISE also supports wildcard certificates to address certificate name mismatch issues. You must configure DNS to resolve to at least one policy services node. If you have more than one policy services node that will provide portal services, you should configure high availability for the portal. For example, you could use a load balancer or DNS round-robin services.
Before You Begin
Step 1Choose Administration > Web Portal Management > Settings > General > Ports.
Step 2Scroll to the Portal FQDNs section, and check the appropriate setting:
•Default Sponsor Portal FQDN
•Default My Devices Portal FQDN
Step 3Enter a fully qualified domain name.
Step 4Click Save, and all nodes (Administration, Policy Services, and Monitoring) restart automatically, which may take several hours to complete.
Step 5Configure the network DNS server so that it resolves the FQDN to the Sponsor or My Devices portal nodes. You must also update DNS to ensure the FQDN of the new URL resolves to a valid policy service node IP address. Additionally, to avoid certificate warning messages due to name mismatches, you should also include the FQDN of the customized URL in the subject alternative name (SAN) attribute of the local server certificate of the Cisco ISE policy service node.

PeopleSoft HCM 9.1 OVM in a single VirtualBox guest machine

Following a suggestion from Jim Marion in an earlier post in this forum, I started installing the PeopleSoft HCM 9.1 OVM using a single VirtualBox guest. The PeopleSoft OVM appliances are delivered as two separate virtual machines, one for the DB and another for the PIA/App-Batch. Since I am running on a 4 GB RAM laptop I wanted to conserve memory by installing on a single virtual machine.
As I was starting to figure out the changes needed in the configuration scripts, for example creating a symbolic link instead of an nfs mount for PS_APP_HOME, I got a surprise. Lo and behold, the good folks at Oracle had already thought of this! In the oraclevm-template.sh there is an environment variable VBOX_SETUP that is set if the script detects the existance of both PS_DB_HOME and PS_HOME. This triggers the installation of all the tiers -- DB, App-Batch, PIA -- on a single machine. With a few tweaks I was able to get a fully functioning HCM environment with a single execution of the setup script.
The starting point for installing PeopleSoft OVMs on VirtualBox is these two blog posts:
[url http://jjmpsj.blogspot.com/2012/05/converting-peoplesoft-ovm-templates-to.html]
[url http://jjmpsj.blogspot.com/2012/06/converting-peopletools-ovm-template-to.html]
Since I was only using a single virtual guest I mounted all the file systems at once. Here are the entries (excluding the System images which are only mounted temporarily as explained in Jim's blog posts):
in VirtualBox:
SATA Port 1: Oracle11gR2.vdi (Normal, 4.41 GB)
SATA Port 2: HCMDB.vdi (Normal, 26.38 GB)
SATA Port 3: Tools.vdi (Normal, 11.25 GB)
in /etc/fstab:
/dev/sdb1               /u01                    ext3    defaults        1 3
/dev/sdc1               /opt/oracle/psft/ptdb   ext3    defaults        1 4
/dev/sdd1               /opt/oracle/psft/pt     ext3    defaults        1 5I commented out the ovm_set_password and ovm_configure_network steps in /u01/scripts/db-reconfig.sh since I had manually set up a static IP on my guest. (Note: this script no longer bothers checking for or setting up oracleasm so you don't need to worry about that). I also uncommented the DEBUG_PSFT_OVM variable in the /opt/oracle/psft/vm/oraclevm-template-utils.sh script. Doing this bypasses the root password reset and networking configuration in the oraclevm-template.sh script.
I modified the .bash_profile script for psadm1, psadm2 and psadm3 to use the ORACLE_SID that the setup script discovered based on the contents of $PSFT_DB_HOME/oradata and added $PS_HOME/setup to the PATH for COBOL compiles:
# psft env vars
export PS_APP_HOME=/opt/oracle/psft/pt/apptools
export PS_CFG_HOME=/home/psadm2/psft/pt/8.52
export ORACLE_BASE=/opt/oracle/psft/pt/oracle-client
export ORACLE_HOME=$ORACLE_BASE/11.2.0.x
export ORACLE_SID=HR91C323
export TUXDIR=/opt/oracle/psft/pt/bea/tuxedo
export LD_LIBRARY_PATH=$TUXDIR/lib:$LD_LIBRARY_PATH:$ORACLE_HOME/lib
. /opt/oracle/psft/pt/tools/psconfig.sh
export PATH=$TUXDIR/bin:$PATH:$ORACLE_HOME/bin:$PS_HOME/setup
export LANG=C
export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
export PATH=$PATH:$COBDIR/bin
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$COBDIR/lib(Just a note on the beauty of VirtualBox: I didn't figure out all the above in a single step. But by taking some snapshots of my virtual machine I was able to go back and start over with a minimum of fuss.)
I still had a few errors after I got a clean run of /opt/oracle/psft/vm/oraclevm-template.sh:
<li>The app engine VERSION program failed because it didn't pick up the PS_SERVER_CFG variable. The variable is set in the script so I'm still trying to figure out what happened.
<li>The ovm_dbusers.sql failed on a couple of statements with insufficient privileges. It is run as SYSADM and may need to be run as sysdba.
<li>The ovm_ib.sql script had a unique constraint error on an insert into psibsvcsetup. Since the row already exists this should probably be an update.
These were minor issues that were easily resolved after the instance was up.
I have started making changes to further reduce the footprint of the VM: lower weblogic min/max heap size to 128m, don't start PSAESRV in the batch server, don't start Analytic and Query servers in the app server, lower the sga_target and pga_aggregate_target in the db server, etc.
These PeopleSoft OVM templates are a fantastic way to get started with an up-to-date, well configured PeopleSoft application.

Hi,
To keep all my peoplesoft servers on a virtual environnement i will use Oracle Database 11.1.0.6 for x86_64 (64 bit) with Oracle Enterprise Linux 5.2 template and install on it the peoplesoft CRM. it's a good idea ? Yes, why not.
But you could also want to minimize the number of virtual machines running in your env by adding the CRM database into the existing Peoplesoft OVM database server, check if there is enough space to host this CRM db in addition of the running HR db, if not you could increase the space or add a new disk.
and which files from http://edelivery.oracle.com i should use to install peoplesoft CRM database ?
You'll only need to download PeopleSoft Enterprise Customer Relationship Management 9.1 application, part number V17881-01 from "PeopleSoft Enterprise - Customer Relationship Management 9.1 Media Pack".
sorry for those question i'm still beginner in peoplesoft.No problem, Peoplesoft is not so easy software anyway.
HTH,
Nicolas.

Migration adapters from OAI 4.1.3 to 9i

Hello,
I am helping a customer who is in the process of upgrading an OAI 4.1.3 hub to 9.0.4 (they're actually going to 10.x, but there is no direct path from 4.1.3 to 10.x). The customer has one or more custom adapters that will need to be migated in the process. When they attempt to start these adapters on there 9.0.4 hub and they get the following errors in the adapter log files.
java.lang.NoSuchMethodError: java.util.Vector: method
add(Ljava/lang/Object;)Z not found
at oracle.oai.agent.proxy.AgentProxy.getDBConnectionInfo(Compiled Code)
at oracle.oai.agent.proxy.AgentProxy.initialize(AgentProxy.java:255)
at oracle.oai.agent.proxy.AgentProxy.<init>(AgentProxy.java:385)
at oracle.oai.agent.service.AgentService.run(AgentService.java:41)
at java.lang.Thread.run(Thread.java:459)
Is this due to changes in the adapter sdk's between 4.1.3 and 9.0.4? If so, is anyone aware of a document that describes migrating adapters from the 4.1.3 sdk to the 9.0.4 sdk?
TIA,
Cliff

i have another errormessage in the exportdb.log file and so the solution doesnt work. But it was a good idea. i have never looked before in the exportdb.log file. i hope the next lines can help to find a solution.
exportdb.log: (last entrys)
GetExitCode returned TRUE (success)
return value = 0
Trying to stop database
IDS stopped
Trying to start database
IDS started
ExportDatabase, returning [Failure, Windows-based W1 Migration Verification]
the status.html window(from DMA) shows the following:
09:42:55 AM] Archive built successfully.
[09:42:55 AM] Verifying integrity of backed up Cisco CallManager database and directory data.
[09:42:55 AM] This can take a long time, depending on the size of the databases and directories. Be patient.
[10:32:11 AM] Failure, Windows-based W1 Migration Verification
[10:32:11 AM] Failed to verify Cisco CallManager database and directory backed up data.
[10:32:11 AM] The database and/or directory cannot be migrated as they are.
[10:32:11 AM] Correct the database and/or directory information and run DMA again.
[10:32:11 AM] Verifcation of DB in IDS failed. Retaining the TAR file as it is.
the windows-server event log shows no error.

Migrate data from SLES OES2 to new SLES OES2 Cluster

Creating a new thread instead of piggybacking on John_Gill's post because his error is slightly different.
I am trying to migrate files from a SLES10sp3 OES2sp2 to a cluster consisting of 2 SLES10sp4 w OES2sp3 nodes.
It manages to copy 2 folders out of 5 selected.
Running miggui on 1 of the nodes that has the nss destination mounted.
Code:
Information: nbackup: precomputing for displaying progress...
Information: nbackup: Total dataSets = 3108, size = 543645KB
Fatal: Cannot migrate source path /media/nss/VOL1/Applic/: nbackup: Failed to open dataset /media/nss/VOL1/Applic/ for backup
Warning: Going to next data set
Error: nbackup: (libtsafs.so 6.50.0 269) No data sets can be found or the resource is not available.
Fatal: Cannot migrate source path /media/nss/VOL1/Data/: nbackup: Failed to open dataset /media/nss/VOL1/Data/ for backup
Warning: Going to next data set
Error: nbackup: (libtsafs.so 6.50.0 269) No data sets can be found or the resource is not available.
Information: Copying /media/nss/VOL1/FTP/ to /media/nss/VOL1/FTP/
Any ideas ?

$(USometimes smdr misses to register the attached resource and in that case can't open the data set. Probably try restarting the smdr on target and if not on source should resolve this issue.
In case of cluster based migration, you need to select the 'Is Cluster Resource' option in the source authentication UI.
Also don't forget to select 'Follow Cluster Resource' option in File System UI.
This option will instruct the smdr to follow the resource and connect to the new node when resource migrates.
-Ramesh
>>> Conz<[email protected]> 01/18/2012 09:06 PM >>>
Creating a new thread instead of piggybacking on John_Gill's post
because his error is slightly different.
I am trying to migrate files from a SLES10sp3 OES2sp2 to a cluster
consisting of 2 SLES10sp4 w OES2sp3 nodes.
It manages to copy 2 folders out of 5 selected.
Running miggui on 1 of the nodes that has the nss destination mounted.
Code:
Information: nbackup: precomputing for displaying progress...
Information: nbackup: Total dataSets = 3108, size = 543645KB
Fatal: Cannot migrate source path /media/nss/VOL1/Applic/: nbackup: Failed to open dataset /media/nss/VOL1/Applic/ for backup
Warning: Going to next data set
Error: nbackup: (libtsafs.so 6.50.0 269) No data sets can be found or the resource is not available.
Fatal: Cannot migrate source path /media/nss/VOL1/Data/: nbackup: Failed to open dataset /media/nss/VOL1/Data/ for backup
Warning: Going to next data set
Error: nbackup: (libtsafs.so 6.50.0 269) No data sets can be found or the resource is not available.
Information: Copying /media/nss/VOL1/FTP/ to /media/nss/VOL1/FTP/
Any ideas ?
Conz
Conz'sProfile: http://forums.novell.com/member.php?userid=54211
View this thread: http://forums.novell.com/showthread.php?t=450931

OVM 3.x: cannot migrate guests from RAC to RAC

Similar Messages

Maybe you are looking for