OVM Manager 3.3.1 Installation Fails

I am having a hard time figuring this out. I am trying to install OVM Manager 3.3.1 on Oracle Linux release 7. I have configured the host file with the IP address and the Name of the host. I have setup the IPTABLE firewall ports. I ran createOracle.sh script successfully. I can ping the host by name and IP address, I can ping outside addresses. When going through the OVM Manager install I get through the point where I choose "1-for installation" and then it says that its retrieving MySQL Database 5.6 and then just goes back to a command prompt. The logs do not give any insight on what went wrong. Not sure where else I can try other than starting over again and installing Oracle Linux 6 and trying to install OVM Manager from there.

by any chance do you have existing installation of mysql to the machine
you are installing OVMM?
another hint is to disable SELinux.
I checked the documentation and OEL 7 is not in the list of supported
OS. I would not try to run any Oracle product on unsupported
configuration and based on this I would advise you run the installation
on OEL 6 updated with the latest level.
Hope this helps,
A.

Similar Messages

OVM Manager 3.1.1 Installation stuck at final step

Hello,
My OVM Manager 3.1.1 installation is stuck at 'Please wait while Weblogic configures the applications... This can take up to 5 minutes.
Trying...
Trying...
Trying...
and continues this message.
Prior to this step it does say Oracle VM Manager is running...
Oracle VM Manager installed.
Ideas?

To add:
found this post
Anyone seen this behavior installing OVM Manager 3.0.2?
Tried what was on there
However what I'm getting now when I enter the username passwords is
Connecting to Weblogic Server...
There is no server running at t3://localhost:7001
Connection to WebLogic server failed...

Operations Manager 2012 Reporting Service installation failed again

Hi dear guys.
i'm an administrator in a company. and our company decided to have monitoring tools for our servers located in two sites.
i started installation of SCOM in Two servers: 1- SQL server 2-Management server, Operations Console, Web Console
all MP's that needed has been installed and configuration completed successfully. then i decided to have Reporting Server too.i did proper tasks and started it with coordination of DBA team. but because of miss configuration in SSRS installing failed. after
repairing SSRS by them installation failed again but reporting Icon appeared in Management console
because of too many communication with DBA team, I installed a SQL server on a separate server(Full Featured) and configured SSRS too. and then started installing SCOM reporting on this server. but it again failed.

I wanted to send whole log but 60000 is maximum allowable character. here's some logs with error event:
[13:27:30]:
Error:     :ImportManagementPack: MP already imported so skip : C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\Microsoft.SystemCenter.Reports.Deployment.mp
[13:27:30]:
Error:     :ImportManagementPack: MP already imported so skip : C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\ODR.mp
[13:27:32]:
Error:     :ImportManagementPack: Error: Unable to load management pack C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\System.NetworkManagement.Reports.MP
Found error in 1|System.NetworkManagement.Reports/31bf3856ad364e35|1.0.0.0|System.NetworkManagement.Reports.MemoryUtilization|| with message:
Failed to verify LinkedReport parameter: Name=OptionList, Value......
[13:27:32]:
Error:     :ImportManagementPack: Unknown Error. System.ArgumentException : The requested management pack is not valid. See inner exception for details.
Parameter name: managementPack
[13:27:32]:
Always: :FirstManagementServer: Failed to load MP C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\System.NetworkManagement.Reports.MP.
We will retry.
[13:27:32]:
Always: :ImportManagementPack: Loading management pack C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\System.NetworkManagement.Reports.MP. 13:27:32
[13:27:32]:
Error:     :ImportManagementPack: Error: Unable to load management pack C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\System.NetworkManagement.Reports.MP
[13:27:34]:
Error:     :Error:FirstManagementServer: Failed to load MP C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\System.NetworkManagement.Reports.MP on retry number 3
[13:27:34]:
Error:     :Error:FirstManagementServer: Gave up trying to load the MP C:\SC2012OMRTM\Setup\AMD64\..\..\ManagementPacks\System.NetworkManagement.Reports.MP
[13:27:34]:
Error:     :Error:failed to import Reporting management packs. This is a fatal error
[13:27:34]:
Error:     :FATAL ACTION: ConfigureReportingForInstall
[13:27:34]:
Error:     :ProcessInstalls: Running the PostProcessDelegate returned false.
[13:27:34]:
Always: :SetErrorType: Setting NonVitalFailure. currentInstallItem: Reporting Server
[13:27:34]:
Error:     :ProcessInstalls: Running the PostProcessDelegate for OMREPORTING failed.... but this item is not fatal so we will process the other items.

When I'm installing the Adobe Application Manager 6.2 the installer fails to initialize!

I've downloaded the new Adobe Application Manager so I can download my CS6. Everytime I try to install it, this pops up:
We've encountered following issues
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem.
So I did download it, but then this pops up:
"Adobe Support Advisor" can't be opened because it is from an unidentified developer.
Your security preferences allow installation of only apps from the MAc App Store and indentified developers.
Please help!!!
Thanks!!!

Hi Barmbs,
It sounds like there might be some restriction in relation to your user account permissions when installing. You might try creating a new administrative account and installing from there. Be sure to give it rights to administer the computer.
Here are instructions if they help
10.6
http://support.apple.com/kb/PH6651
10.7
http://support.apple.com/kb/PH4600
10.8
http://support.apple.com/kb/PH11468
-Dave

OVM Manager 3.2.1 installation issue

Hi,
We are trying to install OVM Manager 3.2.1(on OEL 6.2) but unable to complete the installation as it stops after installing ADF and does not proceed further. Please find the output below.
Verifying configuration ...
Start installing the configured components:
1: Continue
2: Abort
Select Number (1-2): 1
Step 1 of 9 : Database Software...
Installing Database Software...
Retrieving MySQL Database 5.5 ...
Unzipping MySQL RPM File ...
Installing MySQL 5.5 RPM package ...
Configuring MySQL Database 5.5 ...
Installing MySQL backup RPM package ...
Step 2 of 9 : Java ...
Installing Java ...
Step 3 of 9 : Database schema ...
Creating database 'ovs' ...
Creating user 'ovs' for database 'ovs'...
Step 4 of 9 : WebLogic ...
Retrieving Oracle WebLogic Server 11g ...
Installing Oracle WebLogic Server 11g ...
Step 5 of 9 : ADF ...
Retrieving Oracle Application Development Framework (ADF) ...
Unzipping Oracle ADF ...
Installing Oracle ADF ...
Installing Oracle ADF Patch...
OVMM installer exits after Step 5. We could not find any errors in log file.
Any suggestions please?
Thanks in advance!

This issue was caused by root user cannot su to oracle user.
The W/A is to disable ypbind service and run createOracle.sh to make the oracle user a local one.
How to disable ypbind? issue following command based on your host env,
service ypbind stop
or
/etc/init.d/ypbind stop
More details, pls check Bug 16416238 - manager installer should add a prereq check that root can su to oracle user

Cisco Unified Connection Manager IM and Presence installation fails

Hello everyone, we are trying to install laboratory uses the Cisco Unified Connection Manager IM and Presence version10.The installation fails after a warning where there is a popup that asks if it is the first node of the configuration.From the installation manual is not clear if this product should be installed in a cluster architecture (publisher-subscriber).What should be the steps to follow?
Something has to be done on the server where we have installed theCisco Unified Connection Manager?
In attachement the screenshot with popup.
Thanks in advance
Oronzo Lezzi

Hi!
Hello everyone, we are trying to install laboratory uses the Cisco Unified Connection Manager IM and Presence version10.The installation fails after a warning where there is a popup that asks if it is the first node of the configuration .
What should be the steps to follow? vSwitch and ESXi config
1) cisco call manager installed as a publisher.
2) cisco unified connection manager IM & presence add as a subscriber or publisher.

Ops Center 12c - discovery of OVM Manager fails

Ops Center 12c - discovery of OVM Manager fails
I am trying to discover OVM Manager and the OC job fails, I noticed that its trying to connected using port 54321 which only listens to localhost.
is there any way to change Ops Center discovery to use port 54322? I followed this process to enable port 54322 (port 54321 will only listen to localhost) http://docs.oracle.com/cd/E27300_01/E27308/html/vmiug-manager-tcps.html.
Thanks,
-Eli

Did you get an answer to this? I am in the similar situation

Downloaded Adobe Flash 10 but on completion download manager gave message 'installation failed' - how do I fix this?

Downloaded Adobe Flash 10 but at completion of process Download Manager gave me message "installation failed". How do I fix this?

http://support.mozilla.com/en-US/kb/Managing+the+Flash+Plugin#Updating_Flash
Similar problem , but my computer displayed stripes! This is a known problem apparently but site only warns you after taking you directly to Adobe, and you have updated the new problematic flash.
Hope this helps.

Connection problem to the OVM Manager 3.0.3 Console

My OVM Manager 3.0.3 installation was smooth on top of Oracle Linux 6.0, not even with a single error after taking care of some prerequisite warning stuff at the beginning.
After the installation, it displayed some info on how to connect to the OVM Manager Console.
http://ovmmanager:7001/ovm/console
https://ovmmanager:7002/ovm/console
But, not only neither address seems to work but also the server opens neither port.
I have no problem remotely logging into the shell via ssh.
Trying "telnet ovmmanager 7001" and "telnet ovmmanager 7002" isn't connecting.
Also, Oracle is up and running.
# ps -ef |grep XE |wc -l
31
# ps -ef |grep pmon
oracle 1610 1 0 02:28 ? 00:00:02 xe_pmon_XE
I rebooted it couple of times but the same thing.
Could someone please let me know where I should start?
Thanks.
- Young

Hi,
The reason is the /etc/rc.d/init.d/ovmm shell script. It tries to start the weblogic with oracle user. The oracle user doesnt have permission and it fails with a timeout
if [ $action = run ]; then
logger "Starting the Oracle VM Manager application."
echo -n "Starting Oracle VM Manager"
nohup su - oracle -c "$USER_MEM_ARGS DOMAIN_PRODUCTION_MODE=true JAVA_OPTIONS=\"-Djava.awt.headless=true -Xdebug -Xrunjdwp:transport=dt_socket,address=127.0.0.1:8453,server=y,suspend=n -da:org.apache.myfaces.trinidad\" /u01/app/oracle/ovm-manager-3/machine1/base_adf_domain/startWebLogic.sh &" > /dev/null
RETVAL="$?"
fi
change it to
if [ $action = run ]; then
logger "Starting the Oracle VM Manager application."
echo -n "Starting Oracle VM Manager"
nohup su - -c "$USER_MEM_ARGS DOMAIN_PRODUCTION_MODE=true JAVA_OPTIONS=\"-Djava.awt.headless=true -Xdebug -Xrunjdwp:transport=dt_socket,address=127.0.0.1:8453,server=y,suspend=n -da:org.apache.myfaces.trinidad\" /u01/app/oracle/ovm-manager-3/machine1/base_adf_domain/startWebLogic.sh &" > /dev/null
RETVAL="$?"
fi
Thanks,
With Regards,
Sudhir Koneru
Edited by: 926503 on Apr 17, 2012 12:38 PM

Photoshop Installation Failed message

I've tried installing Adobe Photoshop CS6 twice from the Application Manager and constantly receives: "Installation Failed" Unable to extract files. Press Retry to download again or contact suctomer support (EX20). I'm using a PC 32bit computer. Can someone please tell me what may be wrong?
Thanks!

Problem resolved for Photoshop CS6! I downloaded the file directly from website instead of my desktop Applications Manager. However, it did ask me how I wanted to open the file and I indicated the Applications Manager. Photoshop CS6 is now up and running!

OVM 3.1.1 Manager Installation Fails

I get this problem when I install "production" OVM3.1.1
Same passes when I install 3.0.1/2/3. Dont know what is the problem with 3.1.1
It fails stating :
Verifying configuration ...
The database could not be reached using the provided connection info.
Io exception: The Network Adapter could not establish the connection
Configuration verification failed ...
Debug log shows this :
05-28 13:05 system.console DEBUG Please select an installation type:
05-28 13:05 system.console DEBUG 1: Demo
05-28 13:05 system.console DEBUG 2: Production
05-28 13:05 system.console DEBUG 3: Uninstall
05-28 13:05 system.console DEBUG 4: Help
05-28 13:05 system.console DEBUG
05-28 13:05 ovm.installer DEBUG Manager UUID argument set to : 'None'
05-28 13:05 ovm.installer INFO
05-28 13:05 ovm.installer INFO Starting production installation ...
05-28 13:05 ovm.installer INFO
05-28 13:05 ovm.installer.prerequisites INFO
05-28 13:05 ovm.installer.prerequisites INFO Verifying installation prerequisites ...
05-28 13:05 ovm.installer.prerequisites DEBUG * Checking if run by root user
05-28 13:05 ovm.installer.prerequisites DEBUG * Checking if OS is at least Oracle Linux version 5.5
05-28 13:05 system.process DEBUG system.process.start
05-28 13:05 system.process DEBUG system.process.run ended, exitcode was 0
05-28 13:05 system.process DEBUG system.process.run stdout:
unzip-5.52-3.0.1.el5
05-28 13:05 system.process DEBUG system.process.run stderr:
05-28 13:05 ovm.installer.prerequisites DEBUG * Checking if hostname is pingable
05-28 13:05 system.net DEBUG pingMachine IBMblad-238-172, timeout=5, recheck=False
05-28 13:05 system.process DEBUG system.process.start
05-28 13:05 system.process DEBUG system.process.run ended, exitcode was 0
05-28 13:05 system.process DEBUG system.process.run stdout:
PING IBMblad-238-172 (x.x.x.x) 56(84) bytes of data.
64 bytes from IBMblad-238-172 (10.238.210.172): icmp_seq=1 ttl=64 time=0.043 ms
--- IBMblad-238-172 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.043/0.043/0.043/0.000 ms
05-28 13:05 system.process DEBUG system.process.run stderr:
05-28 13:05 system.net DEBUG Machine with ip:[IBMblad-238-172] is pingable
05-28 13:05 ovm.installer.prerequisites DEBUG * Checking if system has enough memory
05-28 13:05 system.fs DEBUG Opened file /proc/meminfo for reading
05-28 13:05 system.fs DEBUG Reading file /proc/meminfo
05-28 13:05 system.fs DEBUG File /proc/meminfo is closed after reading
05-28 13:05 system.fs DEBUG Opened file /proc/cpuinfo for reading
05-28 13:05 system.fs DEBUG Reading file /proc/cpuinfo
05-28 13:05 system.fs DEBUG File /proc/cpuinfo is closed after reading
05-28 13:05 ovm.installer.prerequisites WARNING *** WARNING: Recommended memory for the Oracle VM Manager server installation is 3950 MB RAM
05-28 13:05 ovm.installer.prerequisites DEBUG * Checking if the 'oracle' user and group exist
05-28 13:05 ovm.installer.prerequisites DEBUG * Verifying hardnofiles for user 'oracle'
05-28 13:05 system.process DEBUG system.process.start
05-28 13:05 system.process DEBUG system.process.run ended, exitcode was 0
05-28 13:05 system.process DEBUG system.process.run stdout:
open files (-n) 8192
05-28 13:05 system.process DEBUG system.process.run stderr:
05-28 13:05 ovm.installer.prerequisites DEBUG * Verifying softnofiles for user 'oracle'
05-28 13:05 system.process DEBUG system.process.start
05-28 13:05 system.process DEBUG system.process.run ended, exitcode was 0
05-28 13:05 system.process DEBUG system.process.run stdout:
open files (-n) 8192
05-28 13:05 system.process DEBUG system.process.run stderr:
05-28 13:05 ovm.installer.prerequisites DEBUG * Verifying /u01
05-28 13:05 ovm.installer.questions INFO
05-28 13:05 ovm.installer.questions INFO Oracle Database Repository
05-28 13:05 ovm.installer.questions INFO ==========================
05-28 13:05 ovm.installer.questions INFO Use an existing Oracle database
05-28 13:14 system.console DEBUG Passwords do not match
05-28 13:14 ovm.installer.questions INFO
05-28 13:14 ovm.installer.questions INFO Oracle Weblogic Server 11g
05-28 13:14 ovm.installer.questions INFO ==========================
05-28 13:14 ovm.installer.questions DEBUG Oracle Weblogic Server will be installed in /u01/app/oracle/Middleware/
05-28 13:14 ovm.installer.questions DEBUG
05-28 13:16 ovm.installer.questions INFO
05-28 13:16 ovm.installer.questions INFO Oracle VM Manager application
05-28 13:16 ovm.installer.questions INFO =============================
05-28 13:16 ovm.installer.questions DEBUG The application container will be installed in /u01/app/oracle/ovm-manager-3/
05-28 13:16 ovm.installer.questions DEBUG
05-28 13:16 system.fs DEBUG Opened file /tmp/ovm_config-MYxB0 for writing
05-28 13:16 system.fs DEBUG Writing contents in file /tmp/ovm_config-MYxB0
05-28 13:16 ovm.installer DEBUG Reading configuration about installers in '/3.1.1_new/components/files.yml'
05-28 13:16 system.fs DEBUG Opened file /3.1.1_new/components/files.yml for reading
05-28 13:16 system.fs DEBUG Reading file /3.1.1_new/components/files.yml
05-28 13:16 system.fs DEBUG File /3.1.1_new/components/files.yml is closed after reading
05-28 13:16 ovm.installer DEBUG Using '/3.1.1_new/components/ofm_appdev_generic_11.1.1.5.0_disk1_1of1.zip' as installation file for Oracle ADF
05-28 13:16 ovm.installer DEBUG Using '/3.1.1_new/components/ovm_upgrade_3.1.1.305.zip' as installation file for Oracle VM Manager Upgrade tool
05-28 13:16 ovm.installer DEBUG Using '/3.1.1_new/components/wls1035_generic.jar' as installation file for Oracle WebLogic Server
05-28 13:16 ovm.installer DEBUG Using '/3.1.1_new/components/weblogic_3.1.1.305.zip' as installation file for Oracle VM core & console
05-28 13:16 ovm.installer DEBUG Using '/3.1.1_new/components/ovm_shell_3.1.1.305.zip' as installation file for Oracle VM Manager Shell & API
05-28 13:16 ovm.installer DEBUG Using '/3.1.1_new/components/oracle-xe-11.2.0-1.0.x86_64.rpm' as installation file for Oracle Database
05-28 13:16 system.fs DEBUG path /u01/app/oracle/java does not exist
05-28 13:16 system.fs DEBUG Join paths ('/tmp/ovmm-installer.selfextract_qY3845', 'java')
05-28 13:16 system.fs DEBUG Join paths ('/tmp/ovmm-installer.selfextract_qY3845', 'ovm', 'installer', 'djc', 'lib', 'java')
05-28 13:16 ovm.installer.prerequisites INFO
05-28 13:16 ovm.installer.prerequisites INFO Verifying configuration ...
05-28 13:16 ovm.installer.prerequisites DEBUG * Checking if enough diskspace is available
05-28 13:16 ovm.installer.prerequisites DEBUG * Checking Oracle database connection
05-28 13:16 djc.connection DEBUG Running SQL command on 'jdbc:oracle:thin:@localhost:1521:XE'
05-28 13:16 system.fs DEBUG Opened file /tmp/ovm0fdfZl/ovm5OgTTL for writing
05-28 13:16 system.fs DEBUG Writing contents in file /tmp/ovm0fdfZl/ovm5OgTTL
05-28 13:16 system.fs DEBUG List files in directory with path: /tmp/ovmm-installer.selfextract_qY3845/ovm/installer/djc/lib/java
05-28 13:16 system.fs DEBUG path /tmp/ovmm-installer.selfextract_qY3845/ovm/installer/djc/lib/java exists
05-28 13:16 system.fs DEBUG Join paths ('/tmp/ovmm-installer.selfextract_qY3845/ovm/installer/djc/lib/java', 'djc-1.0.jar')
05-28 13:16 system.fs DEBUG isfile:/tmp/ovmm-installer.selfextract_qY3845/ovm/installer/djc/lib/java/djc-1.0.jar
05-28 13:16 system.fs DEBUG path /tmp/ovmm-installer.selfextract_qY3845/ovm/installer/djc/lib/java/djc-1.0.jar is a file
05-28 13:16 system.fs DEBUG Join paths ('/tmp/ovmm-installer.selfextract_qY3845/ovm/installer/djc/lib/java', 'ant-1.6.5.jar')
05-28 13:16 system.fs DEBUG isfile:/tmp/ovmm-installer.selfextract_qY3845/ovm/installer/djc/lib/java/ant-1.6.5.jar
05-28 13:16 system.fs DEBUG path /tmp/ovmm-installer.selfextract_qY3845/ovm/installer/djc/lib/java/ant-1.6.5.jar is a file
05-28 13:16 system.fs DEBUG Join paths ('/tmp/ovmm-installer.selfextract_qY3845/ovm/installer/djc/lib/java', 'ojdbc14.jar')
05-28 13:16 system.fs DEBUG isfile:/tmp/ovmm-installer.selfextract_qY3845/ovm/installer/djc/lib/java/ojdbc14.jar
05-28 13:16 system.fs DEBUG path /tmp/ovmm-installer.selfextract_qY3845/ovm/installer/djc/lib/java/ojdbc14.jar is a file
05-28 13:16 system.fs DEBUG Join paths ('/tmp/ovmm-installer.selfextract_qY3845/java', 'bin', 'java')
05-28 13:16 djc.connection DEBUG Running SQL script on 'jdbc:oracle:thin:@localhost:1521:XE'
05-28 13:16 system.process DEBUG system.process.start
05-28 13:16 system.process DEBUG system.process.run ended, exitcode was 1
05-28 13:16 system.process DEBUG system.process.run stdout:
05-28 13:16 system.process DEBUG system.process.run stderr:
Io exception: The Network Adapter could not establish the connection
05-28 13:16 system.fs DEBUG Removing file with path: /tmp/ovm0fdfZl/ovm5OgTTL
05-28 13:16 system.fs DEBUG path /tmp/ovm0fdfZl/ovm5OgTTL exists
05-28 13:16 system.fs DEBUG isfile:/tmp/ovm0fdfZl/ovm5OgTTL
05-28 13:16 system.fs DEBUG path /tmp/ovm0fdfZl/ovm5OgTTL is a file
05-28 13:16 system.fs DEBUG Done removing file with path: /tmp/ovm0fdfZl/ovm5OgTTL
05-28 13:16 ovm.installer.prerequisites ERROR The database could not be reached using the provided connection info.
Io exception: The Network Adapter could not establish the connection
05-28 13:16 ovm.installer.prerequisites DEBUG * Checking if Oracle VM ports are available

I will mention that I had the following happen:
I tried to do a demo install.
It failed because I didn't have /etc/hosts setup properly.
I fixed that problem, and restarted the installation.
The second time, I got an error similar to the one you go.
It turned out that the first installation attempt got XE half-installed, but not operational.
I fixed it all by carefully shutting down the half-running database, and removing XE (with RPM), clearing out /u01, and retrying it.
That may all be totally irrelevant to what you're seeing, though.

I am getting the following error messages Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7

When I tried to install latest updates to Lightroom I am getting the following error messaage:
Extension Manager 6.0.8 Update
Installation failed. Error Code: U44M1P7
Ca you explain what I need to do to resolve this?

Jjmarmour please see Installation failed. Error U44M1P7 | Updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html for information on how to resolve the U44M1P7 error.

Service Manager data warehouse management server Installation fails

Hi there,
In Virtual Machine Windows Server 2012 R2 Standard with my user being a Local Admin and SQL Admin. I tried to do a Service Manager data warehouse management server
first installation I am facing the following image as error:
In the event viewer I get the following error:
"Microsoft System Center 2012 R2 Service Manager -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 25211
The arguments are: -2147024809, The parameter is incorrect."
In the Setup log, some of the errors are:
WixRemoveFoldersEx: Entering WixRemoveFoldersEx in C:\Windows\Installer\MSI35E.tmp, version 3.7.1224.0
WixRemoveFoldersEx: Error 0x80070057: Missing folder property: PSCONFIGFOLDER.A591E3B4_D228_431D_BF89_99D52C8FFB76 for row: wrf4582BC4C5CC47B1D2380408CD7A752DC.A591E3B4_D228_431D_BF89_99D52C8FFB76
CustomAction WixRemoveFoldersEx.A591E3B4_D228_431D_BF89_99D52C8FFB76 returned actual error code 1603 but will be translated to success due to continue marking
CAStartServices: CAStartServices was passed . OMCFG
CAStartServices: Checking if service already started. OMCFG
CAStartServices: Attempting to start service. OMCFG
CAStartServices: StartService failed. Error Code: 0x8007042D.
ConfigureSDKConfigService: CAStartServices failed, trying again.... Error Code: 0x8007042D. OMCFG
Action start 17:47:05: _SetHealthServiceConfig.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMServer
MSI (s) (EC!4C) [17:47:05:483]: Note: 1: 2711 2: MOMGateway
SetHealthServiceConfig: Failed to get Feature State.. Error Code: 0x80070646. MOMServer
GetMsiFeatureState: Failed to get feature state. Error Code: 0x80070646. MOMGateway
I have checked the following post but it did not help me:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/c42bb04d-a51e-4037-a8a3-37d714d6faac/scsm-management-server-installation-fails?forum=systemcenterservicemanager
Could you please help me with this issue?
Thanks a lot,
M

Hi,
Sorry I cannot post the full log. I have found also these errors in the log:
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.RegisterSdkSCP
RegisterSdkSCP: There is no previous serviceConnectionPoint
RegisterSdkSCP: Creating New serviceConnectionPoint
RegisterSdkSCP: Adding ACL for current user: DOMAIN\InstallationAccount
RegisterSdkSCP: Adding ACL for SM Admini: DOMAIN\SCSMDWadmins
RegisterSdkSCP: Error: Access is denied.
InstallCounters: LoadPerfCounterTextStrings() failed . Error Code: 0x80070057. momv3 "D:\Program Files\Microsoft System Center 2012 R2\Service Manager\MOMConnectorCounters.ini"
InstallPerfCountersHelper: pcCounterInstaller->InstallCounters() for the default counters failed. Error Code: 0x80070057. MOMConnector
InstallPerfCountersLib: InstallHealthServicePerfCounters() failed . Error Code: 0x80070057.
InstallPerfCountersLib: Retry Count : .
InstallHSPerfCounters: Failed to install agent perf counters. Error Code: 0x80070057.
Thanks for your reply.

Solution Manager Installation Fails at step Run ABAP Reports

I'm trying to install Solution Manager 4.0 on Windows 2003 using SQL 2005. The installation fails at the Run ABAP Reports step: Executing ABAP report RADDBDIF
I have logged in manually and run the RADDBDIF job in SE38 but I receive the same error message. My SAPTRANHOST is properly defined and so are the shares. Can anyone help? Thank!
Here's the sapinst_dev.log:
Calling function module: INST_RFC_GET_INTERFACE
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1065]
 CAbRfcImpl::performFunctionCall
Function call was successful.
TRACE 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1066]
 CAbRfcImpl::performFunctionCall
Function module call succesful: INST_RFC_GET_INTERFACE
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:924]
 CAbRfcImpl::getRfcInterfaceSAP
Function interface generated successfully.
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:926]
 CAbRfcImpl::getRfcInterfaceSAP
Technical properties of function set successfully.
INFO 2008-10-21 14:00:34.842 [iaxxrfcfls.cpp:107]
 CRfcFuncRep::insFuncIf
Information for application function INST_EXECUTE_REPORT copied to local repository.
TRACE 2008-10-21 14:00:34.842 [iaxxrfcfls.cpp:108]
 CRfcFuncRep::insFuncIf
Function interface entered into repository for INST_EXECUTE_REPORT
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:622]
 CAbRfcImpl::setFunction
Function module INST_EXECUTE_REPORT set successfully.
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setFunction() done: true
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter(PARA, [])
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter() done: true
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter(PROGRAM, RADDBDIF)
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter() done: true
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.execute()
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1032]
 CAbRfcImpl::callFunction
Executing function call INST_EXECUTE_REPORT.
TRACE 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1056]
 CAbRfcImpl::performFunctionCall
Calling function module: INST_EXECUTE_REPORT
ERROR 2008-10-21 14:00:35.045 [iaxxrfcimp.cpp:1089]
 CAbRfcImpl::performFunctionCall
FRF-00025 Unable to call function. Error message: Exception condition "WRITE_FAILED" raised. .
TRACE 2008-10-21 14:00:35.045 [iaxxrfcimp.cpp:1090]
 CAbRfcImpl::performFunctionCall
RFC failure or system exception raised
TRACE 2008-10-21 14:00:35.045 [iaxxrfcimp.cpp:1091]
 CAbRfcImpl::performFunctionCall
Exception condition "WRITE_FAILED" raised.
INFO 2008-10-21 14:00:35.045 [iaxxbjsco.cpp:561]
 CIaJSCo::disconnect_nothrow(000:DDIC:EN:nath02:00::SOL:)
RFC connection closed.
TRACE 2008-10-21 14:00:35.45 [iaxxejsbas.hpp:408]
 handleException<ERfcExcept>()
Converting exception into JS Exception ERfcException.
TRACE 2008-10-21 14:00:35.045
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException
ERROR 2008-10-21 14:00:35.045
 CJSlibModule::writeError_impl()
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
TRACE 2008-10-21 14:00:35.45 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-10-21 14:00:35.45 [sixxcstepexecute.cpp:951]
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR ( Last error reported by the step :Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..).
TRACE 2008-10-21 14:00:35.61 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP Solution Manager 4.0 Support Release 4 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step :Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..). You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS. </body></html>
TRACE 2008-10-21 14:00:35.61 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI

Hello Amélie,
Check the file systems if you're not ran out of disk space.
Second, check the database if you've enough storage space left.
Hope it helps.
Cheers,
Satish.

Installation fails via Creative Cloud App manager on windows 8 - can't find log

No information given in Creative Cloud App manager.
I click on "Learn More"
and get a window that tells me the following
Installation failed
Errors encountered during installation.(7)
More Information
"More information" is a link/button but clicking it does nothing.
Where are the logs on windows 8?

You can try checking out the logs, at http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
And this might be handy too: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Good luck,

OVM Manager 3.3.1 Installation Fails

Similar Messages

Maybe you are looking for