OVM Manager install for running OVM server for SPARC plateform

Guys,
I have to install and deploy OVM Manager for managing an existing OVM server for SPARC.
When try to run ovs-agent-setup command, it fails telling that ovm server has not good configuration and exits!!
ovs-agent ** ERROR: The vds service is not configured on the primary domain
Trying to fix by resetting factory default configuration, then poweroff domain and poweron aain but nothing!! I got same error and ovs-agent service is in maintenance.
Now we have create ldoms and servers are in production!! We cannot reset configuration now.
Is-it possible to deploy OVM manager, fix ovs-agent issue without impacting actual vm??? How to do this? I assume that vm created with ldm commande can not be provision with ovm manager.
Please help!!

Hi,
Windows Server 2008 R2 supports two mutually exclusive methods for setting quotas on the amount of file system resources a user can use—disk quotas or directory quotas. Disk quotas are applied to specific users and limit the amount of disk space that user can
use on a particular volume. Directory quotas are applied to all users and limit the amount of disk space that users can use in a particular folder and its subfolders.
I do a test on my pc and find there is no priority between the two quotas, it depends on which quota is smaller. So user A can only save 1 GB files in the folder.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

How do i Install the Software Update Server for Windows 7?

How do i Install the Software Update Server for Windows 7? I get an error saying: Can't Install the Software because it is not currently available from the Software Update server.
I downloaded the software so How do I install it?
Do I install it all over again or when I have windows open?
I am using Bootcamp.

Back up your system drive completely. If you have no backup plan in place, now would be a good time to start. You can use CarbonCopyCloner to make a complete, bootable backup of your system on another drive or volume. After you have done this: download the combo update using the link supplied by Niel and run the installer.

Need help w/ setting up ports to run a server for America's Army

Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
Q: How do I run my own server?
A: Quick and dirty server info:
1. Edit RunServer.bat to change the map.
2. Run RunServer.bat
Or:
server.exe LAN MAPNAME.aao (Host a LAN game)
server.exe global MAPNAME.aao (Host a Public game)
Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
[Engine.GameEngine]
ServerActors=Andromeda.AndromedaMBS
[Andromeda.Andromeda]
GameServerIp=
Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
[Andromeda.AndromedaMBS]
QueryPort=20025
Punkbuster user fix correction.
If [Engine.GameEngine] block has been changed to read as below:
[Engine.GameEngine]
ServerActors=IPDrv.AndromedaMBS
Please add the following block to your INI file:
[IpDrv.AndromedaMBS]
QueryPort=20025
(Last Updated: 2006-04-20)

Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

I keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?

i keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?

The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]].

Is it possible to install and run Windows Server 2008 on a Mac Mini Server in a Virtual Machine software like Parallels

I am wondering if it is possible to install and run Windows Server 2008 on a Mac Mini Server as a VM as my main application uses Windows VisualBasic and Fox Pro and requires a Static IP to connect to it, My other offices connects to Windows Server via RDP.
Basically I am researching a Server for the same purpose and since Mac Mini and OsX both are robust in nature it can fit the bill if every thing work fine.
Thanks

From the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed.

Generating Self Signed Certificate for iPlanet Directory Server for testing

Hi Experts,
I am unable to find how to generate self signed certificate for iPlanet Directory Server for testing purpose. Actually what i mean is i want to connect to the iPlanet LDAP Server with LDAPS:// rather than LDAP:// for Secured LDAP Authentication. For this purpose How to create a Dummy Certificate to enable iPlanet Directory Server SSL. I searched in google but no help. Please provide me the solution how to test it.
Thanks in Advance,
Kalyan

Here's one I did earlier.
Refers to Solaris 10
SSL Security
add a new certificate that lasts for ten years (120 months).
stop the instance:
dsadm stop <instance>
Remove DS from smf control:
dsadm disable-service <instance>
Change Certificate Database Password:
dsadm set-flags <instance> cert-pwd-prompt=on
     Choose the new certificate database password:
     Confirm the new certificate database password:
Certificate database password successfully updated.
Restart the instance from the dscc:
DSCC -> start <instance>
Now add a new Certificate which lasts for ten years (120 months; -v 120):
`cd <instance_path>`
`certutil -S -d . -P slapd- -s "CN=<FQDN_server_name>" �n testcert �v 120 -t T,, -x`
     Enter Password or Pin for "NSS Certificate DB":
Stop the Instance.
On the DSCC Security -> Certificates tab:
     select option to "Do not Prompt for Password"
Restart the instance.
On the Security -> General tab, select the new certificate to use for ssl encryption
Restart the instance
Stop the instance
Put DS back into smf control:
dsadm enable-service <instance>
Check the smf:
svcs -a | grep ds
# svcs -a|grep ds
disabled Aug_16 svc:/application/sun/ds:default
online Aug_16 svc:/application/sun/ds:ds--var-opt-SUNWdsee-dscc6-dcc-ads
online 17:04:28 svc:/application/sun/ds:ds--var-opt-SUNWdsee-dsins1

Re: Using already running Tomcat server for development.

Hi Nick,
Yes, you can use existing Tomcat Server for debugging app developed with
NitroX. And you can refer to Help > Help Contents > NitroX User Guide >
NitroX Tour > Running and debugging the application.
We do support Tomcat 4.0.x to Tomcat 5.0.x. If you need any further
assistance please get back to us.
Thanks
M7 Support
"Nick Mulder" <[email protected]> wrote in message
news:41d9f379$[email protected]..
Sorry if this has been covered anywhere else.Just wondering if you can use an existing tomcat server for debugging
webapps being developed in NitroX. I have a non dedicated server a
development server. Up until purchasing NitroX I have been using ant build
files to compile and re-deploy my apps into the running tomcat server.
Just wondering if I can do something similar thru NitroX and Eclipse.
Forgive me if I am missing something obvious, but I am new to eclipse.
Thanks,
Nick Mulder

Take a look at these links: http://plato.acadiau.ca/courses/comp/dsilver/2513/EclipseAndTomcatTutorial/
http://www.keyboardsamurais.de/2004/01/15/tomcat_tutorial_helloworld_for_complete_fools_-_english/
http://www-128.ibm.com/developerworks/opensource/library/os-ectom/?ca=dgr-lnxw16EclipsTomcat
I've found going through tutorials is a proven, quick way of getting up to speed with new tools and configurations.
HTH,
James

Using already running Tomcat server for development.

Sorry if this has been covered anywhere else.
Just wondering if you can use an existing tomcat server for debugging
webapps being developed in NitroX. I have a non dedicated server a
development server. Up until purchasing NitroX I have been using ant build
files to compile and re-deploy my apps into the running tomcat server. Just
wondering if I can do something similar thru NitroX and Eclipse. Forgive me
if I am missing something obvious, but I am new to eclipse.
Thanks,
Nick Mulder

Take a look at these links: http://plato.acadiau.ca/courses/comp/dsilver/2513/EclipseAndTomcatTutorial/
http://www.keyboardsamurais.de/2004/01/15/tomcat_tutorial_helloworld_for_complete_fools_-_english/
http://www-128.ibm.com/developerworks/opensource/library/os-ectom/?ca=dgr-lnxw16EclipsTomcat
I've found going through tutorials is a proven, quick way of getting up to speed with new tools and configurations.
HTH,
James

Installing and configuring unification server for EP 6.0 SP14

hi
Do we need to install a seprate server for Unification with MS SQL as the Database for enabling Drag & Relate feature with R/3 and EP 6.0 SP14
Does any one have the steps to be perfomed for attaing this feature
Thanks a lot
Jonu Joy

Hi,
No need to install any separate server for enabling Drag and Relate between SAP R/3 and EP 6.0 SP14.
We need to install a separate R/3 unifier in EP5.0 for enabling Drag&Ralate feature. But R/3 unifier comes with EP 6.0 by default.
Check the below Unification Cookbook for for enabling Drag and Relate between SAP R/3 and EP 6.0 SP14.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ca06cc79-0601-0010-b380-fbf1eb4babe5
Thanks,
Ramakrishna

Installing an ABAP Application Server for ECC6? I am getting a few errors!

Hi All
I assumed that this was a simple procedure when installing an Application server.
Run SAPinst and select Dialog instance and install
My server has Java installed and runs fine until you get to the profile directory stage. and when I enter the directory I get the following message (after 30 seconds or so!)
Connect to message server (mexico/0) failed: NIECONN_REFUSED.
I am not sure why! Can anyone help?
Thanks
Phil

> Hi All
>
> I assumed that this was a simple procedure when
> installing an Application server.
>
> Run SAPinst and select Dialog instance and install
>
> My server has Java installed and runs fine until you
> get to the profile directory stage. and when I enter
> the directory I get the following message (after 30
> seconds or so!)
>
> Connect to message server (mexico/0) failed:
> NIECONN_REFUSED.
That error means, that the message server the system is trying to connect to, is not up and running.
Can you reach the messages server via ping? Is your DNS working (in case you use DNS)?
Markus

Updated launchctl plist for running rsync server daemon

I wanted to update the community on my launchctl plist for running rsync as a daemon. This is an update to this thread:
rsyncd plist for launchd -- not starting properly on reboot.
Here is my current plist in /Library/LaunchDaemons
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>Disabled</key>
    <false/>
    <key>KeepAlive</key>
    <dict/>
    <key>Label</key>
    <string>rsync</string>
    <key>ProgramArguments</key>
    <array>
        <string>/usr/local/bin/rsync</string>
        <string>--daemon</string>
        <string>--no-detach</string>
        <string>--config=/Users/jabraham/RSync/rsyncd.conf</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/Users/jabraham/RSync/stderr.txt</string>
    <key>StandardOutPath</key>
    <string>/Users/jabraham/RSync/stdout.txt</string>
</dict>
</plist>
A couple of important points:
* the --no-detach argument is important. Launchctl is responsible for keeping daemons running, so you don't want to use rsync's own facility to spawn a new daemon in the background.   I didn't have this argument before, and it worked for me with Mavericks, but with Yosemite I needed the --no-detach
* I'm using a recent rsync from Homebrew, the much-too-old one bundled with Yosemite didn't work with my hard links properly (I can't actually remember what the actual problem was, maybe it didn't report an existing hard linking error properly, I was trying to hardlink on a file system that didn't support it.) The Homebrew one is in /usr/local/bin. If you don't have rsync from Homebrew or Macports the default one is version 2.6.9 and it's in /usr/bin
* I used LaunchControl from http://www.soma-zone.com/ I recommend it to setup options and to debug your typos and problems in launch daemons.

There are several problems with your .plist, so it's hard to know which one is causing the problem.
For one you have both a Program and a ProgramArguments key, when you should have only one or the other (you use Program if there is just one element to the command, or ProgramArguments if there are multiple.
Beyond that, though, it's not clear which execution model you're trying to use. launchd can run tasks either on demand (i.e. when some event happens that triggers the process to launch) or continuously (where launchd watches the process and automatically restarts it if it fails).
The fact you're specifying network sockets would normally indicate that you're running on demand (i.e. launchd should start rsync whenever an incoming network connection is detected). However, your ProgramArguments includes a --daemon parameter to rsync, which tells it to run continuously and listen for network connections itself. These options are incompatible (i.e. either launchd or rsync can listen to the network, but not both).
You should decide which model to employ - either let launchd listen to the network and run rsync as needed, or run rsync as a daemon and let it listen to the network.
As I said above, it isn't clear which (if either) of these is the root cause of your problem, but they need to be fixed before any more debugging can take place.

Best size for VM SQL Server for a start or maybe Azure SQL Database?

Hello Everyone,
My question is quite general but some of You may have already considered similar issues. Let's say or assume I have the website and mobile application - social kind - used by:
1. 10 K users
2. 100 K users
3. 1 K K users
4. 20 K K users MAX
I am strongly considering use of VM SQL Server mostly because of its PARTITIONING functionality, some advantages in the context of INDEXING compared to Azure SQL Database and JOBs availibility.
Question: what would be the best size and count of VMs related to SQL Server for the start and later?
Question 2 - I am able to move JOBs functionality to my Worker role if I wanted to consider use of Azure SQL Database. SQL Server still has at least those 2 advantages (Partitioning, better Indexing) - is it worth considering Azure SQL Database service for
100 K users and more?
Regards,

Hello Jambor,
Considering the number of users i wouldnt recommend an Azure SQL database, because of certain limitations like Max worker threads, Max sessions, etc. Also the maximum size of the database can be 500GB.
Please refer http://msdn.microsoft.com/en-us/library/azure/dn741336.aspx and http://msdn.microsoft.com/en-us/library/azure/dn369873.aspx for the Azure SQL database options and limitations.
If your application needs to scale-out, Azure SQL Databases are recommended. If it needs scaling-up - then the choice is SQL Server on Azure VM. Please refer http://azure.microsoft.com/blog/2012/06/26/data-series-sql-server-in-windows-azure-virtual-machine-vs-sql-database/
and http://azure.microsoft.com/en-us/documentation/articles/data-management-azure-sql-database-and-sql-server-iaas/ for comparison.
If you already have your application running successfully on your on-premise server, you could use a similar machine on Azure for hosting your SQL server instance. The options are at http://azure.microsoft.com/en-us/pricing/details/virtual-machines/. You could
start with a SQL Server enterprise edition on an A3 VM and then scale-up as needed.
Regards,
Kumar Bijayanta

Mistake installing solaris 10 in server Sun Sparc Entreprise 220r

Hello I am installing solaris 10 in a server Sun Sparc Enterprise220r, it starts with CD1 and the following mistake appears:
THE FILE JUST LOADED DOES NOT APPEAR TO BE EXECITABLE

Perhaps instead of opening a new post, you might have just continued your original thread from a few days ago. It seems to be the same issue - bad burn of the optical media.
http://forum.java.sun.com/thread.jspa?threadID=5229606
Generic instructions for downloading and creating your installation media is here:
http://www.sun.com/software/solaris/download_instruction.xml

Laptop config for running Windows Server 2012

Hello,
For demo purpose I need to install Windows Server 2012 on a laptop, and some other 64 bits applications.
Do you experiment a specific laptop which is running fine with this OS?
For example I tried with Intel i5 and 16 GB RAM : Excel takes 10 min to load and most of the time it announces "Not responding". Same thing for all the other applications. I'm quite paralyzed in my job.
Thanks for advises!

Hi,
I am not sure what is wrong with your setup, but Windows Server 2012 can run on laptop totally fine.
Especially with your rig. Can you tell us did you do a fresh install of Windows Server 2012?
I checked some pages (not to jump to conclusions myself), and I have found out that others didn't have any issues with the setup.
These are the requirements (doesn't matter if it is a standalone physical machine or a laptop):
Windows Server 2012 requirements
Make sure your drivers are up to date.
In this article you will see that the guy used a laptop on which he had Windows Server 2008 (lower config than yours), and it worked just fine:
Installing Windows Server 2012 on ThinkPad T61
Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

Core roles installed on one virtual server for roughly 200-300 mailboxes using Exchange 2010?

For a customer who is looking at keeping costs down, they are wondering whether setting up a virtualized Exchange 2010 server with all the core roles installed would be possible. So the mailbox, CAS and hub all on one virtual slice.
The customer has around 200-300 mailboxes.
I know that its hard to give a guess for sizing, but I was wondering if a 4 core, 16 GB RAM build on Server 2012 would be sufficient, with the storage obvioulsy being SAN. I know this is dependant upon mailbox size and usage, but I don't have those
numbers unfortunately. Would the 4/16 build be sufficient? Too much?
Any further information around this would be great. Thanks.

Hello,
I recommend you use Exchange 2010 Server Role Requirements Calculator to design your environment.
A blog for your reference.
http://blogs.technet.com/b/exchange/archive/2009/11/09/3408737.aspx
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

OVM Manager install for running OVM server for SPARC plateform

Similar Messages

Maybe you are looking for