/OVS empty after upgrading to VM 2.2

I have noticed since upgrading to VM 2.2 my /OVS directory is now empty and I have a directory /OVS.<timestamp>.bak containing all the files/directories from my VM 2.1.2 installation.
I was managing this via Grid Control 10.2.0.5.0 but as this does not currently support VM Server 2.2 - I have installed VM Manager 2.2 with a view to creating a new Server Pool to populate /OVS
However on doing this I got the following error -
OVM-1011 OVM Manager communication with jalfrezi for operation HA Setup for Oracle VM Agent 2.2 failed:<Exception: Cluster root not found.>
(or something similar)
So the suggestion (via a few doc bugs) is to run -
repos.py -n and repos.py -r
To setup the Storage Repository
When I run repos.py -n <storage> on my system
I get a message saying something like -
Mount point: /tmp/ovsrepos_SBkc1q
Error: ['mount','/OVS','/tmp/ovsrepos_SBkc1q'] => mount: /OVS is not a block device
and the same for any directory I use
e.g.
repos.py -n /test
When I created this VM Server originally I used 2X250GB SATA drives as a Logical Volume (which was supported)....could this be the reason I cannot now create a storage repository now ?
Should I re-install and just create non logical devices ?
Thanks

My reply may be unrelated, But I had been through the exact same situation.
I had 4 OVM servers running 2.1.5 and later I followed Oracle recommended way (http://download.oracle.com/docs/cd/E15458_01/doc.22/e16206/toc.htm#BEJHBIIC) to upgrade them to 2.2 and post upgrade, I find that the storage is mounted under +/var/ovs/mount/uuid+ ONLY on the master pool server and rest 3 server had an empty /OVS directory.
I tried many troubleshooting steps and have confirmed that in this scenario, restarting the "ovs-agent" service on MASTER pool server would mount the storage under +/var/ovs/mount/uuid+ on all the NON-master servers.
To confirm this solution, I have tried upgrade process multiple times, faced exact same issue and restarting "ovs-agent" service on MASTER pool server got me going.
--Dheeraj.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Similar Messages

  • HT204478 How do I migrate? My Photos library is empty after upgrade.

    How do I migrate? My Photos library is empty after upgrade.

    I read here that I need to start while holding Option Key to select my iPhoto library. Seems to be "Preparing Library"
    photos won't import from iPhoto to photos app

  • Java process table empty after upgrade solution manager 7.1 Sp10

    Hi Experts,
    I have installed solution manager 7.1 SP3 and completed the SP10 patch upgrade using SUM tool. The upgrade was completed successfully. After upgrade igswd was red. Then i copied the Igs files in kernel files. Now ABAP instance and Igs is working now but JAVA is not coming up. JAVA process table also empty. Can any one help me to solve this issue. Attached the error for reference.
    trc file: "dev_disp", trc level: 1, release: "721"
    sysno      00
    sid        VSM
    systemid   562 (PC with Windows NT)
    relno      7210
    patchlevel 0
    patchno    201
    intno      20020600
    make       multithreaded, Unicode, 64 bit, optimized
    profile    \\VKCSOL\sapmnt\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
    pid        5448
    kernel runs with dp version 138000(ext=120000) (@(#) DPLIB-INT-VERSION-138000-UC)
    length of sys_adm_ext is 592 bytes
    *** SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 5448) [dpxxdisp.c   1316]
      shared lib "dw_xml.dll" version 201 successfully loaded
      shared lib "dw_xtc.dll" version 201 successfully loaded
      shared lib "dw_stl.dll" version 201 successfully loaded
      shared lib "dw_gui.dll" version 201 successfully loaded
      shared lib "dw_mdm.dll" version 201 successfully loaded
      shared lib "dw_rndrt.dll" version 201 successfully loaded
      shared lib "dw_abp.dll" version 201 successfully loaded
      shared lib "dw_sym.dll" version 201 successfully loaded
      shared lib "dw_aci.dll" version 201 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    rdisp/dynamic_wp_check : 1
    rdisp/calculateLoadAverage : 1
    Tue Apr 01 19:02:09 2014
    *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 6 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  6479]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    display_tcp_ip: 0
    DpIPCInit2: write dp-profile-values into sys_adm_ext
    DpIPCInit2: start server >VKCSOL_VSM_00                           <
    DpShMCreate: sizeof(wp_adm) 42864 (2256)
    DpShMCreate: sizeof(tm_adm) 5517056 (27448)
    DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
    DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
    DpShMCreate: sizeof(comm_adm) 1384080 (2744)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm) 0 (296)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm) 0 (80)
    DpShMCreate: sizeof(vmc_adm) 0 (2160)
    DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
    DpShMCreate: sizeof(gw_adm) 48
    DpShMCreate: sizeof(j2ee_adm) 3952
    DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDE0050, size: 7174832)
    DpShMCreate: allocated sys_adm at 000000000DDE0060
    DpShMCreate: allocated wp_adm_list at 000000000DDE30B0
    DpShMCreate: allocated wp_adm at 000000000DDE32A0
    DpShMCreate: allocated tm_adm_list at 000000000DDEDA20
    DpShMCreate: allocated tm_adm at 000000000DDEDA70
    DpShMCreate: allocated wp_ca_adm at 000000000E330980
    DpShMCreate: allocated appc_ca_adm at 000000000E340390
    DpShMCreate: allocated comm_adm at 000000000E34FDA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000E4A1C40
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated gw_adm at 000000000E4A1CF0
    DpShMCreate: allocated j2ee_adm at 000000000E4A1D30
    DpShMCreate: allocated ca_info at 000000000E4A2CB0
    DpShMCreate: allocated wall_adm at 000000000E4A2D40
    DpCommAttachTable: attached comm table (header=000000000E34FDA0/ft=000000000E34FDB0)
    DpSysAdmIntInit: initialize sys_adm
    rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
    dia token check not active (10 token)
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
    rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> EsILock: use spinlock for locking
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    <ES> Info: em/initial_size_MB( 16383MB) not multiple of em/blocksize_KB( 4096KB)
    <ES> Info: em/initial_size_MB rounded up to 16384MB
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 4095 blocks reserved for free list.
    ES initialized.
    mm.dump: set maximum dump mem to 192 MB
    mm.dump: set global maximum dump mem to 192 MB
    EsRegisterEmCheck: Register EmGetEsHandles at 000000013FC48640
    DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
    MPI: dynamic quotas disabled.
    MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 5824
      argv[0] = D:\usr\sap\VSM\DVEBMGS00\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\VSM\DVEBMGS00\exe\jcontrol.EXE
      argv[2] = pf=\\VKCSOL\sapmnt\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=65000
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=VSM
      argv[7] = -DSAPMYNAME=VKCSOL_VSM_00
      argv[8] = -DSAPPROFILE=\\VKCSOL\sapmnt\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c   1702]
    ***LOG Q0K=> DpMsAttach, mscon ( VKCSOL) [dpxxdisp.c   12707]
    MBUF state LOADING
    DpStartStopMsg: send start message (myname is >VKCSOL_VSM_00                           <)
    DpStartStopMsg: start msg sent
    CCMS: Initialized monitoring segment of size 60000000.
    CCMS: Initialized CCMS Headers in the shared monitoring segment.
    CCMS: Checking Downtime Configuration of Monitoring Segment.
    CCMS: AlMsUpload called by wp 1024.
    Tue Apr 01 19:02:10 2014
    01.04.2014 13:32:10.628 PID=5448, TID=5744 SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime:  -168 millisec (max +0). Slept 1000 millisec, Qpc elapsed: +1000 millisec, WindowsUtc elapsed +1168 millisec. SapTime-WindowsUtcTime=-1 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=-1028 millisec (*).
    Tue Apr 01 19:02:11 2014
    CCMS: AlMsUpload successful for D:\usr\sap\VSM\DVEBMGS00\log\ALMTTREE.DAT (2189 MTEs).
    Tue Apr 01 19:02:13 2014
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]
    MBUF state ACTIVE
    DpWpBlksLow: max wp blocks in queue is 800 (80 %)
    MBUF component UP
    DpMsgProcess: 1 server in MBUF
    DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
    Tue Apr 01 19:02:21 2014
    DpModState: change server state from STARTING to ACTIVE
    Tue Apr 01 19:02:23 2014
    ***LOG Q0I=> NiIRead: P=127.0.0.1:61107; L=127.0.0.1:65000: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5086]
    *** ERROR => NiIRead: SiRecv failed for hdl 33/sock 1008
        (SI_ECONN_BROKEN/10054; I4; ST; P=127.0.0.1:61107; L=127.0.0.1:65000) [nixxi.cpp    5086]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5824)
    *** ERROR => DpProcKill: kill failed [dpntdisp.c   397]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Regards
    Jose H.

    Hi Ashutosh,
    Thanks for your immediate reply. Please find the log below.
    trc file: "dev_server0", trc level: 1, release: "721"
    node name   : ID3506750
    pid         : 8068
    system name : VSM
    system nr.  : 00
    started at  : Sat Mar 29 13:41:08 2014
    arguments  :
       arg[00] : D:\usr\sap\VSM\DVEBMGS00\exe\jlaunch.exe
       arg[01] : pf=D:\usr\sap\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
       arg[02] : -DSAPINFO=VSM_00_server
       arg[03] : pf=D:\usr\sap\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
       arg[04] : -DSAPSTART=1
    Used property files
    -> files [00] : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID3506700  : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID3506750  : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID3506700            : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] ID3506750            : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties]
    -> ms host    : VKCSOL
    -> ms port    : 3901
    -> OS libs    : D:\usr\sap\VSM\DVEBMGS00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    [Thr 19300] Sat Mar 29 13:41:08 2014
    [Thr 19300] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 19300] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 19300] JLaunchInitSignalHandling: signal handling is disabled
    [Thr 4928] WaitSyncSemThread: Thread 4928 started as semaphore monitor thread.
    [Thr 23444] JLaunchRequestFunc: Thread 23444 started as listener thread for np messages.
    [Thr 19300] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
    [Thr 19300] MPI: dynamic quotas disabled.
    [Thr 19300] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    [Thr 19300] CCMS: Detected Double Stack (parameter "rdisp/j2ee_start" is active)
    [Thr 19300] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
    [Thr 19300] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
    [Thr 19300] CCMS: CCMS Monitoring Initialization finished, rc=0.
    [Thr 19300] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx2048m [jstartxx.c   2800]
    [Thr 19300] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\VSM\DVEBMGS00\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID3506750]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4
    -> java parameters    : -XX:MaxNewSize=600M -XX:NewSize=600M -XX:MaxPermSize=512M -XX:PermSize=512M -XX:+UseConcMarkSweepGC -XX:+DisableExplicitGC -XX:TargetSurvivorRatio=90 -XX:SurvivorRatio=4 -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -verbose:gc -XX:SoftRefLRUPolicyMSPerMB=1 -XX:HeapDumpPath=OOM.hprof -XX:+HeapDumpOnOutOfMemoryError -Djco.jarm=1 -Djava.awt.headless=true -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dsun.io.useCanonCaches=false -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dcom.sap.jvm.scenario=j2ee -XX:+JavaMonitorsInStackTrace -Xbootclasspath/p:D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/connectors/AutoProbeConnector.jar;D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/Agent.jar -Dcom.wily.introscope.agent.agentName=VSM_DVEBMGS00_server0 -Dcom.wily.introscope.agentProfile=D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/IntroscopeAgent.profile -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 4.1.024 1.6-b04
    -> java vm vendor     : SAP Java Server VM (SAP AG)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 2048M
    -> init heap size     : 2048M
    -> stack size         : 2M
    -> root path          : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : D:\usr\sap\VSM\DVEBMGS00\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\VSM\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\VSM\DVEBMGS00\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50021
    -> shutdown timeout   : 120 sec.
    [Thr 19300] JLaunchISetDebugMode: set debug mode [no]
    [Thr 9092] JLaunchIStartFunc: Thread 9092 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 2097152 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -XX:MaxNewSize=600M
    -> arg[  4]: -XX:NewSize=600M
    -> arg[  5]: -XX:MaxPermSize=512M
    -> arg[  6]: -XX:PermSize=512M
    -> arg[  7]: -XX:+UseConcMarkSweepGC
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -XX:TargetSurvivorRatio=90
    -> arg[ 10]: -XX:SurvivorRatio=4
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -verbose:gc
    -> arg[ 14]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 15]: -XX:HeapDumpPath=OOM.hprof
    -> arg[ 16]: -XX:+HeapDumpOnOutOfMemoryError
    -> arg[ 17]: -Djco.jarm=1
    -> arg[ 18]: -Djava.awt.headless=true
    -> arg[ 19]: -Djava.security.policy=./java.policy
    -> arg[ 20]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 21]: -Dsun.io.useCanonCaches=false
    -> arg[ 22]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 23]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 24]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 25]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 26]: -Dcom.sap.jvm.scenario=j2ee
    -> arg[ 27]: -XX:+JavaMonitorsInStackTrace
    -> arg[ 28]: -Xbootclasspath/p:D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/connectors/AutoProbeConnector.jar;D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/Agent.jar
    -> arg[ 29]: -Dcom.wily.introscope.agent.agentName=VSM_DVEBMGS00_server0
    -> arg[ 30]: -Dcom.wily.introscope.agentProfile=D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/IntroscopeAgent.profile
    -> arg[ 31]: -Dstartup.mode=SAFE
    -> arg[ 32]: -Dstartup.action=UPGRADE
    -> arg[ 33]: -Dsys.global.dir=D:\usr\sap\VSM\SYS\global
    -> arg[ 34]: -Dapplication.home=D:\usr\sap\VSM\DVEBMGS00\exe
    -> arg[ 35]: -Djava.class.path=D:\usr\sap\VSM\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\VSM\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 36]: -Djava.library.path=D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\bin\server;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\bin;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\bin;D:\usr\sap\VSM\DVEBMGS00\j2ee\os_libs;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\bin\server;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\bin;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\bin;D:\usr\sap\VSM\DVEBMGS00\j2ee\os_libs;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;D:\usr\sap\VSM\DVEBMGS00\exe;D:\usr\sap\VSM\SYS\exe\uc\NTAMD64
    -> arg[ 37]: -Dmemory.manager=2048M
    -> arg[ 38]: -Xmx2048M
    -> arg[ 39]: -Xms2048M
    -> arg[ 40]: -Xss2M
    -> arg[ 41]: -DLoadBalanceRestricted=no
    -> arg[ 42]: -Djstartup.mode=JCONTROL
    -> arg[ 43]: -Djstartup.ownProcessId=8068
    -> arg[ 44]: -Djstartup.ownHardwareId=I0649086862
    -> arg[ 45]: -Djstartup.whoami=server
    -> arg[ 46]: -Djstartup.debuggable=no
    -> arg[ 47]: -Xjvmx
    -> arg[ 48]: -XsapSystem=00
    -> arg[ 49]: -XmonGcCallback
    -> arg[ 50]: -DSAPINFO=VSM_00_server
    -> arg[ 51]: -DSAPSTART=1
    -> arg[ 52]: -DSAPSTARTUP=1
    -> arg[ 53]: -DSAPSYSTEM=00
    -> arg[ 54]: -DSAPSYSTEMNAME=VSM
    -> arg[ 55]: -DSAPMYNAME=VKCSOL_VSM_00
    -> arg[ 56]: -DSAPDBHOST=VKCSOL
    -> arg[ 57]: -Dj2ee.dbhost=VKCSOL
    (CompilerOracle read from file D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\.hotspot_compiler)
    [Thr 9092] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 20084] Sat Mar 29 13:41:10 2014
    [Thr 20084] JHVM_RegisterNatives: com.sap.bc.krn.perf.PerfTimes
    2.781: [GC 2.781: [ParNew: 409600K->2306K(512000K), 0.0126041 secs] 409600K->2306K(1994752K), 0.0127881 secs] [Times: user=0.05 sys=0.00, real=0.01 secs]
    [Thr 20084] Sat Mar 29 13:41:11 2014
    [Thr 20084] JHVM_RegisterNatives: com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 20084] JLaunchISetClusterId: set cluster id 3506750
    [Thr 20084] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 20084] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    Sat Mar 29 13:41:23 2014
    15.071: [GC 15.071: [ParNew: 411906K->16315K(512000K), 0.0306641 secs] 411906K->16315K(1994752K), 0.0309011 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
    Sat Mar 29 13:41:32 2014
    24.118: [GC 24.118: [ParNew: 425915K->29114K(512000K), 0.0363407 secs] 425915K->29114K(1994752K), 0.0365634 secs] [Times: user=0.11 sys=0.02, real=0.04 secs]
    [Thr 18736] Sat Mar 29 13:41:38 2014
    [Thr 18736] JHVM_RegisterNatives: com.sap.mona.api.JMonAPI
    [Thr 18736] CCMS: openMonitoringSegment(): inside static JMON Lib: already connected.
    [Thr 17644] JHVM_RegisterNatives: com.sap.mw.rfc.driver.CpicDriver
    [Thr 19340] JHVM_RegisterNatives: com.sap.security.core.server.vsi.service.jni.VirusScanInterface
    [Thr 7816] Sat Mar 29 13:41:39 2014
    [Thr 7816] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7816] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 25/sock 7884
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17936] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17936] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 17/sock 7888
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    31.816: [GC 31.816: [ParNew[Thr 21936] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 21936] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 7856
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 2800] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 2800] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 9/sock 7860
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    : 438714K->67978K(512000K), 0.0626636 secs] 438714K->67978K(1994752K), 0.0628963 secs] [Times: user=0.11 sys=0.08, real=0.06 secs]
    [Thr 7276] Sat Mar 29 13:41:40 2014
    [Thr 7276] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7276] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 7988
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 24572] Sat Mar 29 13:41:42 2014
    [Thr 24572] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24572] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 8132
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 5092] Sat Mar 29 13:41:43 2014
    [Thr 5092] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 5092] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 8088
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 20084] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 24276] Sat Mar 29 13:41:44 2014
    [Thr 24276] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24276] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 8480
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 1316] Sat Mar 29 13:41:45 2014
    [Thr 1316] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 1316] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 9292
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 13068] Sat Mar 29 13:41:46 2014
    [Thr 13068] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 13068] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 9736
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 19652] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
    [Thr 17680] Sat Mar 29 13:41:47 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 9736
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 23760] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 23760] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 10/sock 5976
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:41:48 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 9736
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:41:49 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 9736
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:41:50 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6272
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 5348] Sat Mar 29 13:41:51 2014
    [Thr 5348] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 5348] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6336
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17548] Sat Mar 29 13:41:52 2014
    [Thr 17548] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17548] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6548
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 4216] Sat Mar 29 13:41:53 2014
    [Thr 4216] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 4216] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6424
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 23788] Sat Mar 29 13:41:54 2014
    [Thr 23788] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 23788] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6844
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 6100] Sat Mar 29 13:41:55 2014
    [Thr 6100] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6100] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 7448
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 6828] Sat Mar 29 13:41:56 2014
    [Thr 6828] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6828] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6216
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 644] Sat Mar 29 13:41:57 2014
    [Thr 644] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 644] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 5992
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 7376] Sat Mar 29 13:41:58 2014
    [Thr 7376] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7376] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6136
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 24096] Sat Mar 29 13:41:59 2014
    [Thr 24096] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24096] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6004
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 24460] Sat Mar 29 13:42:00 2014
    [Thr 24460] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24460] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6276
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 13452] Sat Mar 29 13:42:01 2014
    [Thr 13452] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 13452] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 7328
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17884] Sat Mar 29 13:42:03 2014
    [Thr 17884] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17884] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 7372
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 6616] Sat Mar 29 13:42:04 2014
    [Thr 6616] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6616] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 7200
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 3136] Sat Mar 29 13:42:05 2014
    [Thr 3136] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 3136] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6344
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 8284] Sat Mar 29 13:42:06 2014
    [Thr 8284] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 8284] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 7380
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 19240] Sat Mar 29 13:42:07 2014
    [Thr 19240] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 19240] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6940
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 21316] Sat Mar 29 13:42:08 2014
    [Thr 21316] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 21316] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 5988
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 22436] Sat Mar 29 13:42:09 2014
    [Thr 22436] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 22436] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 7368
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 20936] Sat Mar 29 13:42:10 2014
    [Thr 20936] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 20936] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 7528
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 18784] Sat Mar 29 13:42:11 2014
    [Thr 18784] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 18784] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 4460
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 21320] Sat Mar 29 13:42:12 2014
    [Thr 21320] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 21320] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 6148
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 19632] Sat Mar 29 13:42:13 2014
    [Thr 19632] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 19632] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 5948
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 8684] Sat Mar 29 13:42:14 2014
    [Thr 8684] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 8684] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6012
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 7468] Sat Mar 29 13:42:15 2014
    [Thr 7468] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7468] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6032
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 5588] Sat Mar 29 13:42:16 2014
    [Thr 5588] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 5588] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 1032
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 2036] Sat Mar 29 13:42:17 2014
    [Thr 2036] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 2036] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6052
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 6692] Sat Mar 29 13:42:18 2014
    [Thr 6692] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6692] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6188
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 5184] Sat Mar 29 13:42:19 2014
    [Thr 5184] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 5184] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6192
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 5604] Sat Mar 29 13:42:20 2014
    [Thr 5604] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 5604] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 6220
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 15996] Sat Mar 29 13:42:21 2014
    [Thr 15996] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 15996] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6236
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:42:22 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6236
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:42:23 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6236
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:42:24 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6236
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:42:26 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6064
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 19856] Sat Mar 29 13:42:27 2014
    [Thr 19856] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 19856] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6184
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 24128] Sat Mar 29 13:42:28 2014
    [Thr 24128] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24128] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6248
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 13684] Sat Mar 29 13:42:29 2014
    [Thr 13684] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 13684] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 6260
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 7384] Sat Mar 29 13:42:30 2014
    [Thr 7384] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7384] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6264
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 7432] Sat Mar 29 13:42:31 2014
    [Thr 7432] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7432] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6292
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 6700] Sat Mar 29 13:42:32 2014
    [Thr 6700] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6700] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6304
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 7272] Sat Mar 29 13:42:33 2014
    [Thr 7272] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7272] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6340
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 19864] Sat Mar 29 13:42:34 2014
    [Thr 19864] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 19864] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6392
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 5608] Sat Mar 29 13:42:35 2014
    [Thr 5608] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 5608] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6404
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 7160] Sat Mar 29 13:42:36 2014
    [Thr 7160] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7160] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6416
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 14536] Sat Mar 29 13:42:37 2014
    [Thr 14536] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 14536] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 7340
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 24404] Sat Mar 29 13:42:38 2014
    [Thr 24404] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24404] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6232
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 22756] Sat Mar 29 13:42:39 2014
    [Thr 22756] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 22756] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6076
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 6284] Sat Mar 29 13:42:40 2014
    [Thr 6284] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6284] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 7472
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 12696] Sat Mar 29 13:42:41 2014
    [Thr 12696] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 12696] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6380
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 24180] Sat Mar 29 13:42:42 2014
    [Thr 24180] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24180] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6420
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 23444] Sat Mar 29 13:42:43 2014
    [Thr 23444] JLaunchRequestFunc: receive command:17, argument:0 from pid:20668
    [Thr 23444] JLaunchIShutdownInvoke: set shutdown interval (stop:1396080763/end:1396080883/TO:120)
    [Thr 23444] JLaunchProcessCommand: Invoke VM Shutdown
    [Thr 23444] JHVM_FrameworkShutdownDirect: invoke direct shutdown
    [Thr 8780] JLaunchISetState: change state from [Running (3)] to [Waiting for stop (4)]
    [Thr 8780] JLaunchISetState: change state from [Waiting for stop (4)] to [Stopping (5)]
    [Thr 5188] JHVM_RegisterNatives: com.sap.bc.proj.jstartup.sadm.ShmCache
    [Thr 7240] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7240] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6376
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 6536] Sat Mar 29 13:42:44 2014
    [Thr 6536] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6536] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6852
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 18244] Sat Mar 29 13:42:46 2014
    [Thr 18244] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 18244] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 6348
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:42:47 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6348
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:42:48 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6348
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 22796] CCMS: closeMonitoringSegment(): inside static JMON Lib: nothing to do.
    [Thr 8780] JLaunchISetState: change state from [Stopping (5)] to [Stopped (6)]
    [Thr 17680] Sat Mar 29 13:42:49 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6348
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    Heap
    par new generation   reserved 614400K, committed 614400K, used 313963K [0x000000007fff0000, 0x00000000a57f0000, 0x00000000a57f0000)
      eden space 409600K,  60% used [0x000000007fff0000, 0x000000008f028658, 0x0000000098ff0000)
      from space 102400K,  66% used [0x0000000098ff0000, 0x000000009d2528e8, 0x000000009f3f0000)
      to   space 102400K,   0% used [0x000000009f3f0000, 0x000000009f3f0000, 0x00000000a57f0000)
    concurrent mark-sweep generation reserved 1482752K, committed 1482752K, used 0K [0x00000000a57f0000, 0x00000000ffff0000, 0x00000000ffff0000)
    concurrent-mark-sweep perm gen reserved 524288K, committed 524288K, used 70349K [0x00000000ffff0000, 0x000000011fff0000, 0x000000011fff0000)
    [Thr 18896] JLaunchIExitJava: exit hook is called (rc = 0)
    [Thr 18896] JLaunchCloseProgram: good bye (exitcode = 0)
    Regards
    Jose H.

  • Critical issue - delta queues for LIS empty after upgrade BW3.5

    The delta queue in R/3 for LIS sources (S260-261-262) remains empty,
    even after a successful init delta. Hence I cannot extract delta
    records.
    BW3.5
    PI2004.1
    Does the BW upgrade has an effet on the delta queue management in R/3 ?
    The previous configuration BW2.0B PI2004.1 did work fine in that
    respect.
    Laurent Querella
    BI Consultant ALTI

    Laurent,
    from OSS Note 534296 'LBW0: DataSource generation possible for SAP info str.' you can read:
    "(...)it is no longer possible to generate DataSources for info structures (transfer) Snn delivered by SAP (where nnn is between 001 and 500) in the BW interface for LIS info structures (TR: LBW0) in the OLTP. (...)The corresponding DataSources are delivered with the Business Content."
    I think this is the issue...
    However, are you saying that all infostructures are empty ?
    And from where your init is taking data ?
    After an init your delta tables have to be empty...did you empty all these tables before doing your upgrade ?
    Bye,
    Roberto

  • Network drive appears empty after upgrade

    I had my SuperDuper backup on one of two drives in a D-Link NAS. TM backs up to a third drive that isn't on the network - just an external drive here on the desk. I upgraded last week and everything... well everything went to ****, generally, but TM had been working just fine since the upgrade. Today, however, it suddenly went nuts. It was taking forever and sucking up huge resources, even webpages were loading terribly slow. I left it alone for about fifteen minutes, then tried to cancel it... then Finder stops responding. So I try to relaunch Finder, which closes just fine, but I get an error and Finder won't reload. So I reboot, which takes a good 7 minutes.
    Okay, now the network problem: after all that, I can view the files on my one network drive - ironically, the one I don't care about - but my network drive with my SuperDuper sparseimage shows up as empty. I checked in terminal and also FTP. Totally blank. Even though TM backs up on a different drive. What's up? Any ideas? I'm leaving the network drive alone until I figure it out... I really need that sparseimage (during this same issue, TM corrupted the external, so I had to reformat it... so now my only backup is [maybe] on this network disk).
    Argh. I should have waited a month or two before updating. Let someone else deal with the early adopter bugs.

    With Offline Files disabled the contents of the mapped drive are visible and accessible.  Unfortunately, Offline Files must be enabled for BranchCache to work.  
    Looking in the Event Viewer at “Applications and Services Logs\Microsoft\Windows\OfflineFiles\Operational” I can see that the mapped network drive transitioned to slow link during high latency but has never transitioned back. 
    ~JuniorG33k "Why is this thus? What is the reason for this thusness?"

  • Mailboxes are empty after upgrade to 10.5.6

    I just upgraded from Tiger 10.4.11 to Leopard 10.5.6, and after the installation the Mac has rebooted into the new OS. That was just a few minutes ago, and looking things over, all appears to be as before, and the applications launch and work, except for Mail.
    In Mail, all my mailboxes are there, but there is nothing in them. Furthermore, I sent myself a test message, and Mail does not bring it in. Nor is the sent message shown in the Sent mailbox.
    Can anyone tell me what is going on here? Where are all the stored messages that are supposed to be in my mailboxes, and why am I no longer able to send or receive messages?
    Any help most appreciated.
    Tom

    I've encountered this problem on the last three upgrades from Tiger (10.4.11) to Leopard (10.5.6). I've done three different upgrade paths (simple upgrade, clean install, erase/install and migrate) and in all three cases, the Mail problem is exactly the same. When Mail launches, it says the Mail files need to be updated (or something similar), I say OK, and after a few minutes it reports that Mail is ready to use, I say OK and mail opens to a few generic mailboxes with nothing in them. All the mail seems to be gone. Mail hangs and I have to force quit. I can't send or receive mail.
    Here is what I have learned and what I recommend. If you are reading this after you've encountered the problem, described skip to step 3. If you haven't yet done the upgrade start at the beginning.
    By way of preview for the steps below; basically, you will document your current settings, then create a new, empty mail system. Then you will import your mail and reconstruct your mailbox structure. The steps below will guide you through this process.
    1. Before you upgrade, document all of your email settings for login and password, server settings for sending and receiving mail. Also document the arrangement of all of your mailboxes. I recommend making screenshots (cmd-shift-4 followed by spacebar then mouse-click to capture an image of the window). Do this for all relevant views of your mailboxes, so you can see what you want your mailbox structure to look like after you are done. The pictures will probably land on your desktop and be named Picture 1, Picture 2 etc.
    2. Upgrade your OS normally, do all of your software updates etc, but DON'T LAUNCH MAIL YET!
    3. If Mail is running, make it stop. Trash the file; /Users/(yourusername here)/Library/Preferences/com.apple.mail.plist
    4. Move the folder; /Users/(yourusername here)/Library/Mail to the desktop. This is where all of your email is. DO NOT TRASH THIS FOLDER!
    5. Take the computer off the network. You don't want it to check your mail just yet. Either turn off your Airport, or disconnect your Ethernet cable, or both.
    6. Launch Mail. It will ask you to configure it for the first time. Since it is not on the network, you will need to configure it manually, using the settings you documented in step 1. Don't let it configure itself, because it is not on the network and will not be able to find any servers.
    7. After mail is configured, you can bring the machine back onto the network and confirm that your mail settings work. Undo whatever you did in Step 5.
    8. Import your old mail into the new mail settings by choosing File>Import Mailboxes. Point the import step to the Mail folder on your desktop that you moved in step 4. NOTE: If you open the Activity Viewer under the Window menu > Activity, it will let you watch the subsequent processes, which can take a long time under some circumstances. Especially if you have a lot of mail, or if you are on a slow computer.
    9. After the mail is imported, it will be in a folder called something like Imported Mail.
    10. Recreate your original mailbox structure by dragging the mail files (you can select multiple messages) from the folder in the imported mail to the place you want it, or originally had it. This is where the screenshots from Step 1 comes in handy. Drag mail from your imported inbox to the new inbox, etc.
    Some mailboxes will not exist yet. If you don't have a "drafts" folder, for example, create a new message (to anyone - it doesn't even have to be a real address) and save it as a draft. This will create a drafts mailbox and you can then drag mail from your imported drafts to the newly created drafts mailbox. If there is no Trash mailbox, create a new message and then delete it, this will create a Trash mailbox. You can create some of the mailboxes from the Mailbox menu > Go To and choose the mailbox you want. For example, to create the trash folder. Go to Mailboxes->Go To->Trash (or command-5) and that will create a trash folder.
    You may need to recreate your rules/filters. You are on your own there. Maybe document them in step 1 along with the other documentation you make of your previous setup.
    This is a big problem for a lot of people. I've seen it enough to have figured it out and I documented the steps for fixing it. I hope this helps.

  • IPhoto library empty after upgrading to iPhoto 9.6

    HI,
    I have noticed this problem mentioned by others numerous times with no solution that has worked for me.  Has a better fix been found other than recopying all of the files in the 'old masters' list into a new library, effectively losing previously created albums, etc.? Is anyone at Apple actually working this issue since it seems to be pretty widespread and apparently directly related to a bug in iPhoto 9.6?.
    OK, first, i have no back up iPhoto library.  I had one previously but my secondary external drive got full and I had to wipe it to rearrange a bunch of data.  Had planned on re-backing it up when I opened iPhoto and uploaded some new photos from my phone, but this event happened and now I am out of luck...
    My iPhoto library is stored on an external drive (Wester Digital my Passport for Mac) and has worked fine until yesterday when I plugged my iPhone 6+ in to upload photos and sync with iTunes.  Upon booting up iPhoto, I got a notification that I needed to upgrade my library.  I clicked on the upgrade function and was then notified that a mistake was found and a repair was necessary.  The repair was ongoing when iPhoto froze and entire system failed, giving note that startup disk was nearly full.  After doing system restart and opening iPhoto, I found all photos gone from iPhoto window.  iPhoto is using the correct library and after looking at all internal files in iPhoto library, I found all photos had been moved to "old masters, old thumbnails, old previews".  Files are below:
    file:///Volumes/War%20Drive/iPhoto%20Library/1970/
    file:///Volumes/War%20Drive/iPhoto%20Library/1998/
    file:///Volumes/War%20Drive/iPhoto%20Library/1999/
    file:///Volumes/War%20Drive/iPhoto%20Library/2000/
    file:///Volumes/War%20Drive/iPhoto%20Library/2001/
    file:///Volumes/War%20Drive/iPhoto%20Library/2002/
    file:///Volumes/War%20Drive/iPhoto%20Library/2003/
    file:///Volumes/War%20Drive/iPhoto%20Library/2004/
    file:///Volumes/War%20Drive/iPhoto%20Library/2005/
    file:///Volumes/War%20Drive/iPhoto%20Library/AlbumData.xml
    file:///Volumes/War%20Drive/iPhoto%20Library/Apple%20TV%20Photo%20Cache/
    file:///Volumes/War%20Drive/iPhoto%20Library/Attachments/
    file:///Volumes/War%20Drive/iPhoto%20Library/Auto%20Import/
    file:///Volumes/War%20Drive/iPhoto%20Library/Backup/
    file:///Volumes/War%20Drive/iPhoto%20Library/com.apple.iPhoto.plist
    file:///Volumes/War%20Drive/iPhoto%20Library/Contents/
    file:///Volumes/War%20Drive/iPhoto%20Library/Data/
    file:///Volumes/War%20Drive/iPhoto%20Library/Data.noindex/
    file:///Volumes/War%20Drive/iPhoto%20Library/Database/
    file:///Volumes/War%20Drive/iPhoto%20Library/iLifeShared/
    file:///Volumes/War%20Drive/iPhoto%20Library/Info.plist
    file:///Volumes/War%20Drive/iPhoto%20Library/iPhotoAux.db
    file:///Volumes/War%20Drive/iPhoto%20Library/iPhotoAux.db.bak
    file:///Volumes/War%20Drive/iPhoto%20Library/iPhotoLock.data
    file:///Volumes/War%20Drive/iPhoto%20Library/iPhotoMain.db
    file:///Volumes/War%20Drive/iPhoto%20Library/iPhotoMain.db.bak
    file:///Volumes/War%20Drive/iPhoto%20Library/iPod%20Photo%20Cache/
    file:///Volumes/War%20Drive/iPhoto%20Library/Library.cache
    file:///Volumes/War%20Drive/iPhoto%20Library/Library.data
    file:///Volumes/War%20Drive/iPhoto%20Library/Library.iPhoto
    file:///Volumes/War%20Drive/iPhoto%20Library/Library6.iPhoto
    file:///Volumes/War%20Drive/iPhoto%20Library/Library6.iPhoto_2.bak
    file:///Volumes/War%20Drive/iPhoto%20Library/Masters/
    file:///Volumes/War%20Drive/iPhoto%20Library/Modified/
    file:///Volumes/War%20Drive/iPhoto%20Library/Old%20Masters/
    file:///Volumes/War%20Drive/iPhoto%20Library/Old%20Previews/
    file:///Volumes/War%20Drive/iPhoto%20Library/Old%20Thumbnails/
    file:///Volumes/War%20Drive/iPhoto%20Library/Originals/
    file:///Volumes/War%20Drive/iPhoto%20Library/Previews/
    file:///Volumes/War%20Drive/iPhoto%20Library/ProjectDBVersion.plist
    file:///Volumes/War%20Drive/iPhoto%20Library/Projects.db
    file:///Volumes/War%20Drive/iPhoto%20Library/ThemeCache
    file:///Volumes/War%20Drive/iPhoto%20Library/Thumbnails/
    Size of iPhoto library is still over 500 gigs, so data is there apparently.  I immediately backed iPhoto library up, so at least this data has been salvaged, but I still can't access my photos.  I have used iPhoto's rebuild functions sequentially all the way to full rebuild, with no photos being found.  I then used iPhoto library manager app's rebuild function, and it also revealed no photos.
    So, what can I do to sort this out?  Needless to say, with 500+ gigs of photos, I am concerned.  I am hesitant to do the manual rebuild using the 'old masters'  option since I will lose all of my previously organized albums.  Is waiting for Apple to issue a fix that will actually restore lost data only a dream or would that feasibly happen? Thanks in advance for any and all help that can be offered.

    and....
    Here is the step by step method to recover your photos into a new Library....
    Please read the warning below first.....
    The current emergency only workaround fix for this issue when the user hasn't made or doesnt have access to  any backups, is as follows....
    Quit iPhoto
    In Finder, Select iPhoto Library
    Control Click on iPhoto Library and choose Show Package
    Drag Masters or Old Masters folder to either desktop or external HD if not enough space on System Drive
    Delete or preferably move iPhoto Library file to new location so at a later date one can recover the library again if needed..
    Restart Mac
    Launch iPhoto... (It should then create a new Library automatically...)
    Drag and drop the Masters or Old Masters folder(s) onto iPhoto's icon... or use the menu option in iPhoto to import photos and point to the Masters or Old Masters folders saved out previously.
    Be patient............
    Photos will then be re-added to iPhoto... and added to the new library...
    Note: If you have both Masters and Old Masters folders then add them one at a time, letting iPhoto import and index all the photos from one folder before adding another....
    Important Warning!!!: All modifications and folder structures/albums from the original library will be lost.... but at least the original photos are rescued... and a new library is created that should be free of issues with the current iPhoto/Yosemite combination.

  • NFS Mounts Empty After Upgrade

    Hello, I'm having some issues with my file sharing setup this morning.  Can anyone shed any light?  I didn't notice any relevant Pacman warnings I needed to watch out for.
    After running pacman -Syu on my laptop ( NFS client) and trying to mount shares from my file server I get "successful" mounts, no errors that I see, but showing empty directories.  Files are there on the server.  My NFS server was not updated.  NFS configuration has not changed (except what and pacman -Syu might change).  I have rebooted since updating.
    Also, when I mount as user, I am prompted for my root pass to unmount, this should not happen. 
    # from fstab
    nas1.lan2.demurgatroid.net:/Misc        /mnt/Misc        nfs4    rw,user,soft,intr,noauto,rsize=8192,wsize=8192    0 0
    # from exports on server
    /srv/nfs/Misc        10.144.15.100(rw,no_subtree_check)
    # Example
    [jamie@ada ~]$ mount | grep Misc
    [jamie@ada ~]$ mount /mnt/Misc
    [jamie@ada ~]$ ls -al /mnt/Misc
    total 0
    drwxr-xr-x 1 root root 0 Dec 2 15:19 .
    drwxr-xr-x 1 root root 108 Dec 2 15:22 ..
    [jamie@ada ~]$ umount /mnt/Misc
    umount: /mnt/Misc: umount failed: Operation not permitted
    [jamie@ada ~]$ sudo !!
    sudo umount /mnt/Misc
    [sudo] password for jamie:
    Thanks, let me know you need more data.
    --Jamie

    I believe this is all my error.  My lately unreliable wifi dropped while putting out fires at work so I plugged in an ethernet cable and disabled my wifi which changed my IP - so I was not allowed per my own rules.  In the process I learned something new:
    Change my fstab like so enables convenient auto mounting
    nas1.lan2.demurgatroid.net:/Misc        /mnt/Misc        nfs4    rw,user,soft,intr,noauto,x-systemd.automount,x-systemd.device-timeout=10,timeo=14,rsize=8192,wsize=8192    0 0

  • Library showing empty after upgrade to iPhoto 11

    Hi all,
    Yesterday I decided to upgrade to iPhoto 11, basically because I eventually want to go to Aperture. Although I have been reading about all the problems around iPhoto 11, I decided to give it a try. For one of my libraries the upgrade caused a lot of problems, but I got it working at the end. The second library, though, will not upgrade at all. Instead it is showing an empty library, as if you are using iPhoto for the first time. The library isn't empty, though, because I can still access it with iPhoto9.
    So there must be something preventing iPhoto11 from doing its thing, but I haven't the foggiest. I have tried all sorts of things I came across in fora (except rebuilding the whole library) but to no avail.
    Does any of you have a brilliant idea as to what I could do to get iPhoto11 working ?

    Since you still can open the library in question in iPhoto '09, iPhoto '11 cannot have opened the library at all. Once a library has been opened in iPhoto '11, no earlier version will be able to open it.  The empty library you are seeing when trying to open that library in iPhoto '11, must be a new default library, that iPhoto '11 is creating, since it cannot open that library.
    I suggested to try to launch iPhoto in Library First Aid Mode, to force ito open that library. Quite often does this trick iPhoto into opening a library, that it will not open otherwise.
    This is a general issue: it does not seem to be possible to set a standard program to open a certain filetype.
    Have you tried to use the "Change all" button? Then all ".photolibrary" libraries will be opened in iPhoto '11.

  • Collections are empty after upgrading to a bigger data drive

    Last summer I upgraded the size of my data drive (I have a multi-bayed old Mac Pro) and all seems to be well. I recently reviewed my Collections (in LR5) which I upgraded from 4 at the same time) which I use to group images and noticed that images were missing. All my folders on the hard drive seem fine, they all recognise that the images are on the new larger hard drive. However many of the collections (though interestingly not all) seem to think the images are still on the old discontinued drive which i no longer have. When I select an image to 'reconnect it' it tells me its on another drive (the old drive) and will not reassign the file name to the same image which is now on the newer larger drive. I could understand this if the Folder structure was incorrect, but its not, and Ive synced it. Does anyone have a solution for me? Much appreciated

    Yes, that's exactly what you would expect, and that's exactly the catalog you want to use.
    You will need to reconnect the photos in that old catalog using these instructions: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
    Do NOT synchronize anything. Do NOT import anything. If you open this backup catalog and perform the fix described at that link, you now have a catalog where all the photos are "not missing" and the collections are intact.
    If there are new photos added to your existing catalog after you performed this move, we can deal with those next. Let me know how it goes.

  • Sent Mail folder empty after upgrading from Tiger to Leopard

    Hi,
    Many thanks in advance for your attention.
    Writing for a friend:
    This is for their PowerPC G5. Running OS 10.5. Mail - version 3.
    When they upgraded from Tiger to Leopard (not an Erase and Install), their Sent Mail folder in Mail was empty of any sent mail.
    However, I can see they have sent mail in their Home/Library/Mail folder.
    How to I get Sent Mail in Mail to see this?
    (Drag and drop does not seem to work. I tried to drag and drop one saved mail from the Home Library/Mail folder into the Sent Mail folder in Mail and it didn't take).
    They have only one email account.
    Thank you,
    - Ross

    Lonnie, thanks
    Mailbox behaviors set up exactly as you describe, "Store sent messages on server" is checked and "Delete" set "Never".
    Rebuild doesn't really help.
    I use Kerio 6.0.6 mail server, with IMAP (143) for incoming and SMTP (25) for sending.
    And it works already like four or five years without problems.
    Any ideas would be appreciated.
    Thanks a lot.
    Leo.

  • Trash can icon always shows as empty after upgrade to 10.6.2

    I searched the archives and didn't see any information about this particular situation: my trash can icon always shows as empty even though the trash has items in it.
    If I right click on the icon, "Empty Trash" is grayed out, but if I click on the icon I can open the trash can and choose "empty" at the top right of the window. It's not really a big deal, just weird.
    Anyone else have this happen?
    Kim

    V.K., I hadn't had the chance to try creating a new user account yet, but I just noticed the trash showed it had trash and I right clicked the icon and the empty trash option is now available. I chose empty trash and it worked.
    I don't what changed...but it seems to be OK now...
    Thanks!
    Kim

  • ICal on iMac is empty after upgrade to Lion, but okay on 4s and iCloud

    I cannot figure this one out.  I have an iMac on my desktop, an iPhone 4s, and a MacBook Air.  I upgraded the iMac to Lion, and of course the 4s is on iOS5. I moved from mobile me to iCloud.  If I access iCloud via a web browser, all of my old calendar data is there.  If I check my iPhone 4s, all data is there.  But on the iMac, when I launch iCal, there is no data, even though it is running the new (Lion) version.
    anyone out there able to help me on this one?
    thanks in advance...

    FIGURED IT OUT!  I had to go into iCal prefs, choose "accounts," select "add account" and choose "iCloud" as type, then put in my apple ID, etc.  Boom.  There they are...
    weird that I had to go through this, but at least it is solved.
    thanks...

  • In iMovie, all my files are empty after upgrade. How can I find them?

    I went into iMovie today to look at some old videos and notice mostly all my files are empty. I'm not sure how long its been this way, but it seems like it happened over the summer sometime. I only have files from June to the present. Where can I find them?
    I tried to read up on others with similar problems and tried some of the suggestions, but no luck.

    In the Event mode you an sort the events  this way:
    In the Photos mode (without Event titles displayed) the photos can be sorted this way:
    For organizing your photos this post by Terence Devlin is has some excellent suggestions: Better way to organize my images?: Apple Support Communities.
    OT

  • Inbox empty after upgrade

    Upgraded from 10.3.9 to 10.4.4 and upon opening mail it imported from the previous mail version. In so doing, none of the mail in my inbox came across, however all the mail in mailboxes (created folders) did. When I look at the mail folders in the library, there is nothing in the pop earthlink folder for the inbox. There is mail in the sent box. Is this inbox mail not saved on the HD? Was it deleted or is it hidden from view? I cannot find it using spotlight or find in any way I have tried. The only other account was an old .mac account from the trial period, I did not subscribe. This is a Powerbook Aluminum 15" G4 1.5mhz, 1 gig RAM, 128 mb vram, 80gig HD with 30 gig available. I have not lost anything critical, but any advice on this would be welcome. We are preparing to upgrade other laptops in thge house and would like to avoid this mishap. Thanks.

    Since an account's Inbox is usually the most active mailbox, it is more prone to corruption over time. If this mailbox had some minor corruption that didn't prevent access or was unnoticed with the previous Mail.app version, it can have an effect on the import process. The mbox format used with Tiger Mail is different from previous Mail.app versions. Each message contained in a Tiger mailbox is stored as a separate file in .emix format located within the Messages folder which is within the xxxxxx.mbox folder at the Finder level. This provides for Tiger Spotlight search capabilities.
    Along with the import process to Tiger Mail, there is also a conversion process to the Tiger mbox format. Since all other mailboxes were successfully converted, IMO the account's Inbox mailbox had a problem before the import/conversion process.
    Did you use the Rebuild Mailbox function on all mailboxes or at least the most active mailboxes on a regular basis? I've been using the Mail.app exclusively since Jaguar was introduced, thru Panther and now Tiger. I do so once a month or so depending on activity and I haven't experienced any problems and my import and conversion process from Panther Mail to Tiger Mail went without a hitch. And I experienced no problems when upgrading from Jaguar to Panther and from Panther to Tiger but I always update my backup immediately before installing a major OS Upgrade as insurance just in case.

Maybe you are looking for

  • Why can't I find itunes on my windows xp system?

    I have an HP Pavilion with a 2.93 GHz processor, .99 GB of ram and Windows XP, version 2002. I am trying to download iTunes, but after the "Thank you for downloading iTunes" message comes up, I cannot find the file anywhere on my computer! I have ena

  • Won't power on, or charge

    Blank screen, no response to a/c charger (battery meter) & won't power on, can't sync with pc or use at all

  • Selecting an option in a SELECT feild

    lets say i have a form which allows me to edit details of products stored in a database. on this edit form, i have a select box where the user can indicate the color of the item. since it is an EDIT form, there is already data abotu the product in th

  • Foreign JMS Server vs Messaging bridge

    Could any body tell me which one is the best Whether Foreign JMS Server or Messaging bridge for connecting Weblogic to IBM MQ Series.I am trying to use foreign jms server but i dont know how to post the message to that queue i created in foreign jms

  • Sudden spinning ball - FCE freezes

    I recently upgraded from FCE 1.0 to FCEHD. I am editing my first project in FCEHD and in the middle of playing from the timeline, I get the spinning beach ball (with no warning or explanation). This started after about one week of working on this pro