OVS - getting dump with the message Subnode/attribute INPUT already exists

Hi All,
I am using OVS for the field Shopping cart number.whenever i click on F4 help, icon i am getting the dump with the following message 'Subnode or attribute INPUT already exists ' .. Any idea / clue regarding this dump.please advise me.
Thanks & Regards,
Lakshmi.

Also check this link:-
Regarding select options
It also talks about the same problem.

Similar Messages

OVS dump (Subnode/attribute INPUT already exists)

Hi gurus,
I have created WD application with multiple views where user can navigate between views.
Every view has its own funcionality and user after working in one view can go to main menu, and choose another view...
Each view has it's own OVS.
The problem i faced is a dump in OVS when testing my application..
When I execute OVS search help in one view and then navigates to a different view and presses OVS search help there,
I get a dump (Subnode/attribute INPUT already exists).
Indeed, some of the input fields (in my views) for which I use OVS are the same fields, but I implemented separate OVS in each view since they have diferent logic behind them.
Does anyone know how to proceed with this problem?
thnx in advance,
Tom

Hello,
thanks for your inputs Krishna & Sumit.
Krishna, you are correct I did mapp the nodes from component controller to views through context mapping.
I deleted the mappings, removed OVS from component controller context nodes, and left only view context nodes
with OVS. It seemed a logical thin to do but still, this did not solve the problem.
On some views i have multiple fields connected with OVS... So (when i start the program) when I use OVS in first view it works fine, but upon navigation to another view and selectig OVS search help for a field it crashes.
Nodes in my views are independant and are only a part of a single view and a component controller, but wihout the mapping with views.
Some attributes (from my view context nodes) for which I use OVS have the same name in other views.
Could this the problem? But each of my views has its own OVS event hander so I gues same name of an attribute in
different view wouldn't be a problem, or?
@ Konstantin
I get a short-dump right after clicking a serach help on a field connected with OVS.
When I start my program i can branch to 6 views, each view has it's own OVS.
Regardless of the view, OVS works fine with the firs view. Only when navigating away from a view in which i used OVS and by trying to use OVS in onother view, I get RABAX_STATE error:
" The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along the call hierarchy."
"UNCAUGHT_EXCEPTION" "CX_WD_CONTEXT"
"CL_WDR_CONTEXT_NODE_INFO======CP" or "CL_WDR_CONTEXT_NODE_INFO======CM006"
"IF_WD_CONTEXT_NODE_INFO~ADD_CHILD_NODE"
Hope this helps...
Kind regards,
Tom
Edited by: Tom Baksa on Aug 24, 2010 2:04 PM
Edited by: Tom Baksa on Aug 24, 2010 2:05 PM

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

I always have the message : An older item already exist.

When I copy file (that is already on the server) from imacSnow 10.6.7 to server tiger10.4.11, I always have the message : An older item already exist. Even if the file have the same or earlier date. The server and the Imac have the same time and zone on their clock.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

My book order gets stuck with the message 'your book order is not complete'

hi,
while trying to place my first order for a book, I get the message above, with the message that the book order is still being sent to the publisher.
during the book submission, I went through what appeared to be a re-registration (although, using the same details, the right information seemed to be picked up in later stages of the process.)
I am using Aperture 3 on Lion (10.7.1)
oddly, I can't get into my 'order status' part of the Account part of the Apple store either.
i'm not sure if something is incomplete, or what!
anyone have any ideas, or has experienced this in the past?
regards,
Nick

It seems that closing the application gives you the opportunity to cancel an 'in progress' book submission - the only way that I have come across.
Going in again and re-submitting has *thus far* done what is expected - I am now waiting for my confirmation email.
The address change screens are a bit of a mess, but that should not really make a huge difference if you are not having to change addresses - tabbing around the fields makes some sense of it. (apple, you may well want to fix this - contact me if screen shots would help)
Nick

Frequent dumps with the message "LOAD_PROGRAM_LOST"

Hi,
I get frequent dumps in an SRM development server SRM.
u201CLOAD_PROGRAM_LOSTu201D is the dump.
The error analysis says this
While the program was running, the program "CL_O24AZ2T4VNGKGGI9LRCNKSPN8DNCP" had to be reloaded because a bottleneck pushed it out of the local program buffer. However, the database was found to contain an already changed program.
I thought it to be problem with program buffer.When I checked the parameters,the current value of the parameter u201Cabap/buffersizeu201D is 500MB and the available free space is 1MB.
If I increase the value, would my problem be resolved?Or would there be any other dependent parameters that I should take care.Please help.
Thanks in advance.
Regards,
Sudheer.

Hi,
if you are using ORACLE, try to consuder increasing sga_max_size and db_cache_size
to set this parameter you must consider your physical memory is available.
i have experienced in the top three largest consumer goods mfg and distributor, which have huge database size and high database growth, with large number of user, currently running 400 MB in abap_buffer_size but seems running well.
hope it help you
rgds,
Alfonsus Guritno

Apps found in Itunesmedia/mobile application are duplicated in Itunesmedia/automatically add to Itune/mobile application. Could cause the message "a newer version already exists"?

Does any one have a solution as to why I keep getting the message saying " a newer version already exist" when i syn my ipod touch.

Browse out to your Automatically Add to iTunes folder located under either:
Mac OS X
~/Music/iTunes/iTunes Media/
Windows Vista/7
C:\Users\USERNAME\Music\iTunes\iTunes
And delete all the apps that are located in this folder.
B-rock

"The folder with the notebook name you specified already exists. Please enter a different name" when tried to open existing onenote.onepkg

Hi All,
Office 365 -Onenote 2013
I am facing this issue when ever i tried to open the existing Onenote.onepkg. Unless i give different name it will not open.
What is the problem and how can i fix this?
Thanx In Advance,

Seems this a sync/conflict issue between your local OneNote and OneDrive. You must change your local folder name and avoid any existing files in that clould-folder may be overwritten by local files in the notebook you open, if the files have the same
name.
You'd better to change the name on one of sites.
Thanks.
Tony Chen
TechNet Community Support

POWERLIST: Subnode or attribute DY_OFN already exists (termination: RABAX_STATE)

Hello,
I've made a Powerlist to show Quality notifications. It works fine, except when I click on "Change Query", the dump "ERROR: Subnode or attribute DY_OFN already exists (termination: RABAX_STATE)" appear.
DY_OFN is actually one of my selection criteria fields, and seems that when I click on change query goes on dump because the instance of this element already exists.
Any clue about how to solve this problem?
How can I do to debug when "Change query" is clicked?
Thanks in advance

Hi David,
Here the issue is, you are trying to create a node in context and the logic is getting called again. As the node already exists, it cannot create the node again with the same name.
You need to put a condition to restrict the logic to execute only once.
Example:
IF FIRST_TIME = abap_true.
" Here place your code
endif.
Hope this helps you.
Regards,
Rama

Getting dump with message CALL_FUNCTION_GET_NAME_FAILED

Hi,
My requirement is to write a report which will be run in background every Monday and the result will be sent to a user as email with excel as attachment.
I tried it by giving the email in 'Spool list recipient' in SM36. ut since the length of the output is more than 255 chars, so i thought of writing the email code as shown below.
DATA: l_message_content LIKE soli OCCURS 10 WITH HEADER LINE,
        l_receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
        l_packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
        l_listobject LIKE abaplist OCCURS 10,
        l_compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
        lw_object_hd_change LIKE sood1,
        l_compressed_size LIKE sy-index.
l_receiver_list-recnam = sy-uname .
l_receiver_list-esc_des = 'B'.
APPEND l_receiver_list.
lw_object_hd_change-objla = sy-langu.
lw_object_hd_change-objnam = 'Selection'.
lw_object_hd_change-objsns = 'P'.
Mail subject
lw_object_hd_change-objdes = 'KRB SAP Inconsistency Report'.
Mail body
APPEND 'Consisteny report between KRB and SAP' TO l_message_content.
CALL FUNCTION 'TABLE_COMPRESS'
    IMPORTING
      compressed_size = l_compressed_size
    TABLES
      in              = <fs_table>
      out             = l_compressed_attachment.
DESCRIBE TABLE l_compressed_attachment.
CLEAR l_packing_list.
l_packing_list-transf_bin = 'X'.
l_packing_list-head_start = 0.
l_packing_list-head_num = 0.
l_packing_list-body_start = 1.
l_packing_list-body_num = sy-tfill.
l_packing_list-objtp = 'ALI'.
l_packing_list-objnam = 'Selection'.
l_packing_list-objdes = 'SAP KRB Consistency Report'.
l_packing_list-objlen = l_compressed_size.
APPEND l_packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
      object_hd_change = lw_object_hd_change
      object_type      = 'RAW'
      owner            = sy-uname
    TABLES
      objcont          = l_message_content
      receivers        = l_receiver_list
      packing_list     = l_packing_list
      att_cont         = l_compressed_attachment.
I am getting the mail which i checked in SBWP but when i clicked on the attachment i am getting dump with message CALL_FUNCTION_GET_NAME_FAILED.
Short text
    Error when starting a Remote Function Call.
What happened?
    "CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
     error) "
    An error occurred when executing a Remote Function Call.
Error analysis
    An error occurred when executing a Remote Function Call.
    "CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
     error) "
    Status of connection.... "RFC DRV=??? ???"
    Internal error code.... "RFC_IO4"
    Internal error: Invalid RFC handle.
Trigger Location of Runtime Error
    Program                                 SAPMSSY1
    Include                                 SAPMSSY1
    Row                                     266
    Module type                             (FORM)
    Module Name                             XAB_RUN_DRIVER
Please help in this.
<removed by moderator>
Edited by: Thomas Zloch on Sep 14, 2011 11:57 AM

Hi,
Check your RFC Connection Configuration. Also, check the used username & password.
Reward points if the asnwer is helpful.
Regards,

I have an old Mac G5 with OSX 10.5.8 After a crash of my HD, I reinstalled the CS3. At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under th

I have an old Mac G5 with OSX 10.5.8
After a crash of my HD, I reinstalled the CS3.
At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under three choices to "send back" and "records in a second time "or" never record "and I continue to choose the latter option.
Another problem is that in Bridge (version 2.0.0.975) I can no longer see thumbnails of RAW files from my Canon 40D that I saw before.
Should I upgrade ACR? which is the latest version supported on my Mac?
thank you

Sergio Bellotto if you keep receiving the registration screen then please try accepting the screen in a different User account.

I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' it won't go away-'delete' is greyed out-can't access calendar! Help!

I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' i--t won't go away-'delete' is greyed out--can't access calendar! Help!

I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' i--t won't go away-'delete' is greyed out--can't access calendar! Help!

I ran an iTunes update. It failed with the message System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem. I tried reinstalling but get the same message.

I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683)

I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.

I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.

Okay, folks, after a 3 1/2 hour phone call with a (very patient) telephone support person at Blackberry, here's what I learned.
You can check your USB drivers this way:
Plug in your phone into your USB drive. Assuming your Blackberry is "seen" by your computer...
Go into the Device Manager on your computer (control panel)
Expand the Universal Serial Bus controllers item on the bottom of the list
Right-click on BlackBerry Smartphone and choose Properties
Click on the Driver tab
Click on the Driver Details button
You should see one driver. I saw two. The one the BlackBerry likes is the RimUsb one.
So here's what NOT to do: We tossed the entire driver that was the "extra". This effectively made using my mouse and keyboard impossible, as they are USB, and sent my poor husband into the basement to find a million-year-old keyboard (and then a mouse) with the old fashioned kind of connectors (PS2). Bleh. Don't do that.
Here's what I did that worked (not saything this will work for you -- this modifies the Registry so better do a system backup with that backup and restore if you're nervous about this sort of thing):
From the start menu, choose run, and type regedit to get into the Registry editor.
Follow this file path: Computer, HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Class
Click on: {36FCE60-C465-11CF-8056-4445535400000}
If there's an item on the right called "UpperFilters", delete it. (see pictures)
Hope this helps someone.
Karin
First pic: shows "before"
Second pic: shows full file path and "after"

Gmail on iphone was working fine until yesterday when it prompted me with the message cannot get mail user name or password for gmail is incorrect, i have tried deleting the account and re-created a new account, same problem, can anyone help?

gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?

paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.

OVS - getting dump with the message Subnode/attribute INPUT already exists

Similar Messages

Maybe you are looking for