OW function modules to read ibase
Hi consultants,
Is there any "OW" function modules to read ibase , if yes please let me know the function modules .
Regards,
Naveen Kumar M S
hi
check this out
CRM_IBASE_COMP_CHANGE
it is used for treading and saving the changes in ibase
also try this
BAPI_ECRMISUTO_INIT
best regards
ashish
Similar Messages
-
Function modules to read ibase at runtime
Hi guru's,
Is there any function modules to read ibase at run time if yes please send those function modules its urgent please please.
regards
naveen kumaranswered
-
Any function module to read all the values in Tcode-PPQD?
Hi all
Is there any function module to read all the values in Tcode-PPQD (Display Qualifiaction Catalog).
and any idea what tables are involved to get these values like parent and child relationship?
Thanks in advance.
Murali.Murali,
you can use the following..
data: w_sobid type sobid, "Qualification ID
w_objid type objid. "Qualification Catalog
select objid into w_objid
up to 1 rows
from HRP1001
where otype = 'QK'
and plvar = '01'
and istat = 1
and risgn = 'B'
and relat = '030'
and endda ge sy-datum
and begda le sy-datum
and sclas = 'Q'
and sobid = w_sobid.
endselect.
if sy-subrc eq 0.
write: / w_objid,w_sobid.
endif.
Regards,
Suresh Datti -
Function module to read data form customer tabels
hi,
can anyone suggest function module to read data form customer tabels?
Please give me reply.
TKS,
Dharani.PHi,
this thread is hvaing your answer.
Is there a Function module to get customer hierarchy data?
Regards,
Pravin -
Function module to read 'Customer Material InfoRecords'?
Is there a function module to read customer material inforecords?
Transaction code VD53 is the display screen for Customer Material INforecords. I have a requirement to read this data in user exit.
Thanks
GovaI found one FM. RV_CUSTOMER_MATERIAL_READ
But it won't serve my purpose as I need to find customer material number for a given material number.
But, I found the table where this information is stored. KNMT. I'm going to create a custom FM to serve my purpose. -
Help required in creating function module which reads payroll clusters.
Hi ,
We have a requirement where in we need to create a function module for reading a sequence of tables from payroll clusters. This function module does two functions:
1.Read the payroll results from one system.
2.write the payroll results to other system.
please do the needful as soon as possible.
Thanks in advance.
Regards,
Durga.hi
Refer to the below thread
Programming with Clusters for HR-Payroll
Regards
Sameer -
Function module to read Comma Seperated File (CSV)
Hi,
Is there any Function module to read CSV file from presentation server or Application server?
Regards,
MadhuHi madhukeshwar,
1. Exactly for this purpose,
i have developed an independent FORM
where we give inputs
a) file name (eg. abcd.txt)
b) separator (eg , COMMA in your case)
c) internal table (eg. t001)
2. It will provide the data
in proper format
(no matter what the separator)
(it can work with any kind of separator)
3. just copy paste in new program.
REPORT abc.
change your table declaration and file name
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
PERFORM myupload TABLES t001 USING 'd:\t001.txt' ','.
BREAK-POINT.
in debug see t001
INDEPENDENT FORM
FORM myupload TABLES orgtab
USING filename separator.
Data
DATA : BEGIN OF itab OCCURS 0,
myline(1000) TYPE c,
END OF itab.
DATA : extension(5) TYPE c.
DATA : name(100) TYPE c.
DATA : newfilename TYPE string.
Step 1
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = filename
TABLES
data_tab = itab.
Step 2
LOOP AT itab.
REPLACE ALL OCCURRENCES OF separator IN itab-myline WITH
cl_abap_char_utilities=>horizontal_tab.
MODIFY itab.
ENDLOOP.
Step 3
DATA : path LIKE pcfile-path.
path = filename.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
extension = extension
name = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
invalid_drive = 1
invalid_extension = 2
invalid_name = 3
invalid_path = 4
OTHERS = 5
Step 4
newfilename = filename.
REPLACE name IN newfilename WITH 'temp'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = newfilename
TABLES
data_tab = itab
FIELDNAMES =
Step 5
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = newfilename
has_field_separator = 'X'
TABLES
data_tab = orgtab.
ENDFORM. "myupload
3.
regards,
amit m. -
Function module for reading payroll results
HI,
I need a function module for reading payroll results RT table.
Import parameters are personal number, payroll area, and payroll period.
Export should be RT table.
Regards,
Wasim AhmedHai Wasim
Check the following Code
data: payroll_cluster like t500l-relid.
call function 'PYXX_READ_PAYROLL_RESULT'
exporting
clusterid = payroll_cluster
employeenumber = pernr-pernr
sequencenumber = payroll-evp-seqnr
READ_ONLY_BUFFER = ' '
READ_ONLY_INTERNATIONAL = ' '
CHECK_READ_AUTHORITY = 'X'
IMPORTING
VERSION_NUMBER_PAYVN =
VERSION_NUMBER_PCL2 =
changing
payroll_result = payroll_us
exceptions
illegal_isocode_or_clusterid = 1
error_generating_import = 2
import_mismatch_error = 3
subpool_dir_full = 4
no_read_authority = 5
no_record_found = 6
versions_do_not_match = 7
others = 8
if sy-subrc <> 0.
if sy-subrc <> 0.
write: / 'Fehler beim Laden des US Abrechnungsergebnisses'(003).
write: /'zu Personalnummer'(008), pernr-pernr,
'bei Sequence-Number'(012),
payroll-evp-seqnr.
write: / 'Fehlercode ='(004), sy-subrc.
endif.
endif.
Thanks & regards
Sreenivasulu P -
Function module for reading service line items of a po
function module for reading service line items of a po.............I want to read data from eslh and esll tables to getthe service line details.....
My requirement is if the item category is 9 I need to print the service line items. So I wan to read the data of service line items from a function module. I am not able to find a fm which fetches both elsh and esll data...Hi oskchaitanya ,
use bapi BAPI_PO_GETDETAIL1.
Regards
REA -
Is there any RFC function module to read domain fixed value
Hi,
Is there any RFC function module to read domain fixed value from remote system in basis layer?
As we cannot simply wrap DD_DOMVALUES_GET with a new RFC module,because remote system will not install our component, our wrap function module is not there.
We may need a RFC fm from basis layer.HI,
Try using Function Module:
DD_DOMA_GET , If it is RFC enabled it can be used for reading the domain,
Kindlly go through this link below:
How to get "Fixed Domain Values" from other system by RFC-Call?
Hope it helps,
Regards
Mansi -
Function module to read the expired useful life of asset
Hi,
Is there a function module to read the expired useful life of asset. We are using the depriciation start date to calculate the expired useful life of asset, but the fiscal year shift and matching the calendar year with fiscal is causing the logic to give a month difference between the calculated value and the value in the asset.
Please let me know if there is a Function module or BAPI for getting the values. Kindly provide example for the function module call too.
Regards,
Prabaharan.GHi,
Check the following function modules.
AISC_CALC_EXPIRED_USEFUL_LIFE.
Check the following link it might be of some help to you.
Re: asset useful life
Regards,
Ram. -
Function module to read data from a SPO
Hi guys,
Inside a transformation a have a rule, ABAP routine type, in wich I need to read data from a SPO (semantically partitioned object). Is there an ABAP function module or Class that allows to read data from a SPO?
The SPO from wich I need to read the data is DSO based.
Thanks in advance.
David.Hi David,
The normal procedure is using Function Module RSDRI_INFOPROV_READ. However, according to the documentation it only works for DSOs, InfoCubes and MultiProviders.
Could you access as a work-around a MultiProvider? Or use any logic to first determine which PartProvider of the SPO-based DSO or InfoCube is required and then use the Function Module to read the data?
Best regards,
Sander -
Function Modul for read field label
hi all
i search a function modul for read the field label from data element.
Example for data element matnr, i must have field label text material.
Thx abap_beginHi,
If you give input parameters type, field and table you get data element using
RP_PRINT_GET_DATA_ELEMENT
Try also
KL_TABLE_INFO_GET
But not sure if this futfill your requirement... -
Function Module to Read data from ESLH & ESLL
Hi All,
Presently i am working on the Service Purchase Order
I have to get the data from the Service Master tax conditions which is storing in ESLH & ESLL database tables.
So is there any Function Module to get the data.
regards:
Sridhar JHi David,
The normal procedure is using Function Module RSDRI_INFOPROV_READ. However, according to the documentation it only works for DSOs, InfoCubes and MultiProviders.
Could you access as a work-around a MultiProvider? Or use any logic to first determine which PartProvider of the SPO-based DSO or InfoCube is required and then use the Function Module to read the data?
Best regards,
Sander -
Function module to read error message provided message class and mssg no.
Hi experts,
I am trying to populate my database table with the error message.
The error message as comming form standard code in an ITAB.
I am getting the error class and message number.
Can any body please tell me any function module to read the error.
Or is there any way to populate the database table with the error message.
Regards,
Sandipan.Hi,
You can use the Function module mentioned below.
call transaction 'VA42' using bdcdata mode w_mode
update w_synch
messages into it_mesgtab.
loop at it_mesgtab into wa_mesgtab where msgtyp ca 'EA'.
endloop.
if sy-subrc <> 0.
read table it_mesgtab into wa_mesgtab index 1.
endif.
call function 'MESSAGE_TEXT_BUILD'
exporting
msgid = wa_mesgtab-msgid "Messg class
msgnr = wa_mesgtab-msgnr "Messg No.
msgv1 = wa_mesgtab-msgv1
msgv2 = wa_mesgtab-msgv2
msgv3 = wa_mesgtab-msgv3
msgv4 = wa_mesgtab-msgv4
importing
message_text_output = it_err-sapmessage.
Append it_err.
Regards,
Srinivas
Maybe you are looking for
-
My songs are still on my ipod but they wont play
So my playlist is still on my ipod and when i choose a song it displays the title and artist, but the song itelf wont play. anything i can do?
-
Apache FOP configuration with Oracle XE
Hi, I have installed Oracle XE on my laptop and upgraded Apex to 3.2. I am now trying to install Apache FOP for PDF printing. I am following Section 5 of the following document: http://www.oracle.com/technology/products/database/application_express/h
-
Using imported archive in UDF using import statement
Hello Expert, I am trying to use the class of keystore_api.jar which is impoted in imported archive in my UDF using the import statement com.sap.engine.interfaces.keystore.KeystoreManager but I am getting the error package com.sap.engine.interfaces.k
-
Excise tab on basic excise duty for po
hi friends, My requirement is : while doing gr in migo for that when we check (item ok - check box) then condition is : if that po bed is not zero ex 16 % then excise tab has to display else ex 0% excise tab shouldn't appear. Can u plz sujjest on th
-
Song List of 138 Megs will not burn on 700 Meg Disk - iTunes 9
Does anyone in the iTunes universe have any idea why iTunes 9 will not allow me to burn a song list consisting of only 24 songs at about 138 Megs to a 700 Meg capacity CD? I was able to do this in the past with more songs, more space taken up, withou