OWA 2013 Expired Password Change - not working

We are in the process of moving mailboxes from our 2010 environment to our 2013 environment and are using the 2013 CAS as internet facing, for any mailboxes on 2010, requests are proxied through.
We have the registry DWORD ChangeExpiredPasswordEnabled set to 1 in HKLM\SYSTEM\CurrentControlSet\Services\MSExchange OWA but this isn't working.
It use to work perfectly well when we had the 2010 CAS server internet facing.
Is this still supported in Exchange 2013?

I opened up a case with Microsoft and we've done 2 things, not sure which has fixed it.
1) On the password policy for the domain, set the min password age as 0 days (previously set as 1)
2) On the CAS server, under IIS, Default Websit, OWA, Authentication and on Basic Authentication set the default domain to "\"
This has resolved the issue for us.
I had the 1st suggestion done and running for a few days and it still would not work. The 2nd one, however, was the one that worked for me. Instructions below.
1- Open IIS Manager on the CAS server.
2- Navigate to "<Server Name>\Sites\Default Web Site\owa". Double-click "Authentication". Select "Basic Authentication". Make sure it is enabled. Click "Edit" in the far-right pane. Enter "\" into the "Default domain" field. Leave "Realm" field blank.
Click "OK".
3- Navigate to "<Server Name>\Sites\Default Web Site\owa\auth". Double-click "Authentication". Select "Basic Authentication". Make sure it is enabled. Mine was disabled. Click "Edit" in the far-right pane. It should pick-up the "\" through the
hierarchy. Enter "\" into the "Default domain" field if it has not. Leave "Realm" field blank. Click "OK".
4- Navigate back up to "<Server Name>" under "Start Page" in the left pane. Click on the server name to select the server. Click on "Restart" in the far-right pane to restart the web server.

Similar Messages

Lotus Notes password change not working

Hi,
I'm integrating Lotus Notus and currently we are able to create users in the Domino server, so we have many doubts:
Lotus Notes Id Files are created in the Domino server, but this Id Files needs to be copied in the users own laptops or desktop pc's. What is the best way we can give the user the Id File?
For password changes: I have test password change from OIM self-service, I mean, I create a user, then I provision the user account to Lotus and finally I login with the user account to OIM user self-service interface and try to change password, connector log says everything is ok and the user Id file is correctly modified but, in Domino's server, Lotus internet/http password is not modified, so it is correct? I expect the http/internet password to be changed too. For test purposes I have to copy the new Id file from the Domino server and paste it in the client pc where Lotus Notes client is installed, I put the new password and I'm able to login, but http/internet password is not changed.
So I don't know if this is a limitation from the connector or if I miss something in order to be able to perform password changes, I have read many times connector documentation but this is not clear for me. I also have read oracle waveset Domino connector documentations but seems to work in a different way OIM do.
Please help me
Regards.

Hi SaikatDas,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation
Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Based on your issue, it is related to the IIS, so I’m afraid that it is not the correct forum for this issue. therefore, I suggest you can post this issue directly to the IIS forum:http://forums.iis.net/
, maybe you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

MARS working ACS-password changes not working

If I change my password at the active directory level, ACS should correspondingly accept that and work with my MARS appliance. THe problem I'm seeing is failed logons using an account with a recently changed password. ACS reports "password update failed" or something like that for the failed MARS logons. Other ACS integrated cisco devices are working fine.
Is there a setting within MARS that caches passwords?
thanks

Some things to try...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... though I was just thinking, this new User probably shouldn't be the same name as an existing one.
A relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

My newly changed apple password is not working on my MacBook to help me change my password to log on?

I just need help changing my password on my MacBook to log in. But my log in password and newly changed apple password are not working. Can I reset it or change the password another way or get a list of past password to try if those might be what the Mac thinks is my password still?

You can reset it.
For Snow Leopard and previous.
http://support.apple.com/kb/ht1274
For Lion and later.
https://discussions.apple.com/docs/DOC-4101

HT201303 Someone uses my apple ID to purchase, I have changed my password but not work . How can I disassociate my bank account with my APPLE ID?

Someone uses my apple ID to purchase, I have changed my password but not work . How can I disassociate my bank account with my APPLE ID?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

My mac has had refresh and install now my password will not work on the hardrive how do i change this?

my mac has had refresh and install now my password will not work on the hardrive how do i change this?

Boot from your install disk and when you reach the Install screen choose Change Password from the Utilities menu.
Also check this Apple article http://support.apple.com/kb/HT1631

My apple password is not working - iv'e changed it online succesfully, however, it won't work on my iphone

Can someone assist me on why my apple password is not working on the phone?

What error is it giving you and double check if your entering the correct password and the email address is also correct.

When I attempt to updates apps on my ipad my password does not work. I tried updating them one at a time and it still doesn't work. I've reset my password and I can use the new password and update apps on my PC but not on my ipad. Why?

When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad. Why?

Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

TACACS enable password is not working after completing ACS & MS AD integration

Enable password for (Router, Switches) is working fine if identify source is "Internal Users", unfortunately after completed the integration between ACS to MS AD, and change the Identity source to "AD1" I got the following result
1. able to access network device (cisco switch) using MS AD username and password via SSH/Telnet.
2. Enable password is not working (using the same user password configured in MS AD.
3. When I revert back and change the ACS identity source from "AD1" to "Internal Users" enable password is working fine.
Switch Tacacs Configuration
aaa new-model
aaa authentication login default none
aaa authentication login ACS group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec ACS group tacacs+ local
aaa authorization commands 15 ACS group tacacs+ local
aaa accounting exec ACS start-stop group tacacs+
aaa accounting commands 15 ACS start-stop group tacacs+
aaa authorization console
aaa session-id common
tacacs-server host 10.X.Y.11
tacacs-server timeout 20
tacacs-server directed-request
tacacs-server key gacakey
line vty 0 4
session-timeout 5
access-class 5 in
exec-timeout 5 0
login authentication ACS
authorization commands 15 ACS
authorization exec ACS
accounting commands 15 ACS
accounting exec ACS
logging synchronous
This is my first ACS - AD integration experience, hoping to fix this issue with your support, thanks in advance.
Regards,

Hi Edward,
I created a new shell profiles named "root" as the default one "Permit Access" can't be access or modified, underneath the steps I've made.
1. Create a new shell profile name "root" with max privilege of 15. And then used it in "Default Device Admin/Authorization/Rule-1" shell profile - see attached file for more details.
2. Telnet the Switch and then Issue "debug aaa authentication" using both "Root Shell" and "Permit Access" applied in Rule-1 profile.
Note:
I also attached here the captured screen and debug result for the "shell profiles"

After a restore from Time Machine my login password does not work.

My HD crashed and I replaced the HD. I then restored from Time Machine. After it was done restoring it prompted me for my apple ID and password and account info. Now when I try to login, the password does not work. After several failed passwords, it says I can reset my password using my apple ID. How do you do this? I click on the message and it just disappears. I can't login!

Is it your actual Apple ID login password that you're talking about (which is obviously working since you got into this forum) or the password for your user account. If the latter, simply boot to your ML Recovery partition (holding down the Command and R keys while booting) and set a new password via Terminal.
Boot into your Recovery partition and, from the Utilities menu, open Terminal. In Terminal, type in:
resetpassword
...a small app will run allowing you to select a user and change the password for that use. Enter the new password twice (the second time to verify) and give yourself a password 'hint'. Then reboot and use your new password on your account.
Clinton

EHP4 installation using EHPI : Error message: DDIC password does not work:

Dear All,
We are upgrating enhancement packages 4 using EHPI in 64 bit server. I am facing this error in Extraction phase , I have to provide DDIC / SAPServiceSID/ DB specific , next says ddic password is not correct. But when i tried to login with the same password into 000 client, it works. But when through EHPI , it throws error. Kidnly check the error and please suggest me ... Thanks in advance..
Error message: DDIC password does not work: RFC call to failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM DEST=R3D, GWHOST=SAPRBSBD-01, GWSERV=sapgw00, SYSNR=00 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner 'SAPRBSBD-01:3300' not reached TIME Thu Dec 24 12:27:13 200 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3147 DETAIL NiPConnect2: 192.168.1.40:3300 SYSTEM CALL connect ERRNO 10051 ERRNO TEXT WSAENETUNREACH: Network is unreachabl.
Regards
Raj

Dear Rajeev,
DDIC pwd for 001 is not same as 001,Will that be a problem ? But the Extraction requests for DDIC 000 client password. Are you sure UME comes into this scenario ?
@ Raghu - I have checked the link and it speaks about the resetting the EHPI. I dont want to reset and want to solve ddic password error.
Sorry if am wrong
@ Gerard,
Yes the hostname is SAPRBSBD-01.I am able telnet the IP 3300 and it works fine. FQDN SAPRBSBD-01.chen.local. The smicm service entries are with SAPRBSBD-01 but not with FQDN. Changing it to FQDN will help us to resolve the issue. Please suggest me.
Also the error refers to some RFC connection, any idea on that.
Thanks to all and looking for your valuable suggestions.
Raj

Need to update OS and password does not work

IPad was set up under fathers work email. Father passed away and I continued to use his pw for upgrades. Went to upgrade this time and password does not work. Changed his profile email to mine and tried to update pw it could not answer a security code. Creted new accounts, changed pws yet still asking for his work email pw which no longer works

You can try requesting a new password for your fathers Apple ID here: http://www.apple.com/support/appleid/
Regards,
Steve

OAM Password policy not working.

Hi All,
I am configuring a password policy in OAM which enforces the user to reset his password at first login. OAM is using OID as user store and I have added oblix password related objectclasses to OAM schema. OIM is used to provision all users to OID. I have also enabled the Checkbox Change on Reset in password policy.
I have also made certain attributes visible in OAM user manager such as obpasswordchageflag, oblastsuccesfullogin, oblastfaillogin etc.,
Once the user is created in OID through OIM, the values for attributes obpasswordchageflag, oblastsuccesfullogin, oblastfaillogin are empty.
Case1: obpasswordchangeflag attribute value is empty for user say oamtestuser. oamtestuser logs in to OAM protected application with default password provided in OIM. I could see the oblastsuccesfullogin attribute value updated in oamtestuser profile as expected. Similarly oblastfaillogin value also got updated for failed login as expected.
Case2: obpasswordchangeflag set to true manually in user profile for oamtestuser. oamtestuser logs into OAM protected application with default password. Upon submit, user is redirected the change password page which prompts the user to enter current password and new password. Upon submit user will be shown another page with backup button. Upon clicking back button, user is asked to login to the application once again with new password. Upon submit, user is shown change password page again instead of logging to application with new password. I have noticed that obpasswordchangeflag attribute value is still set as true.
Case3: After executing Case2, even after modifying the obpasschangeflag value to false or making empty, the attribute values of oblastsuccesfullogin and oblastfaillogin are not getting updated accordingly.
Please let me know if you have any clue on this.
This is really urgent. Would appreciate quick help.
Thanks.
Mahendra.

HI Sagar,
Thanks for the response.
Another major update: When we tried creating user using OAM workflow, the obpasswordchangeflag got true value by default and password change functionality worked as expected. So it is obviously an issue with provisioning user through OIM. We manually created an attribute obpasswordchangeflag and provisioned a new user with value as true but still the user profile in OAM User Manager for attribute obpasswordchangeflag is empty. This means that there needs to be some mapping which we are missing i.e., an attribute in OIM has to be mapped correctly with OID attribute obpasswordchangeflag .
So we are searching for this mapping stuff. Do you have any other opinion on this?
Thanks
Mahendra.

HT4946 I backed up and encrypted with password but on restore the password does not work. Advice

I backed up and encrypted with password but on restore the password does not work. Advice

After a HD failure on my 2009 iMac,, fittgyed new oner, installedf os (tiger), from original disk, restored all documents etc. changed password with disk utility. over 48 hrs re3setting permissions so switched off. all seemed ok. downloaded combined os updates. Now my password does not work. tried rersetting, no go. Terminal does not have rest password on.
Any suggestions please

My iTunes password does not work on my iPhone...

My iTunes password does not work on my iPhone, but it does on my MacBook. Why? This is really annoying. How can I solve my problem? I don't even know how to contact Apple.

dennythepest wrote:
My iTunes password does not work on my iPhone,...
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

OWA 2013 Expired Password Change - not working

Similar Messages

Maybe you are looking for