OWA 2013 SP1 read S/MIME signed mails on other browsers

Hi,
we have configured S/MIME on our exchange platform using set-smimeconfig. It works so far, but we have encounted a rather strange behaviour:
When trying to read a S/MIME signed email in a browser other that IE, it just displays the error "S/MIME isn't currently supported for
your browser or platform."
How can i configure OWA to display the content of a S/MIME signed message in an unsupported browser (and probably display the above warning since the certificate cannot be verified)?
Kind regards,
Peter

yes,
your answer did not match my question.
as i already wrote in my first post:
"How can i configure OWA to display the content of a S/MIME signed message in an unsupported browser
(and probably display the above warning since the certificate cannot be verified)?"
I know in which browsers S/MIME is supported, but OWA does not display the content of a signed (not encrypted!)
in another browser. This behaviour was not there in exchange 2010.

Similar Messages

Pages load too small to read in firefiox but not in other browsers. Always have to zoom in 5 times.

Pages load too small to read in Firefox but not in other browsers. Always have to zoom in 5 times.
== This happened ==
Every time Firefox opened
== A long time, months, I think since I bought the computer..

I forgot to add the extensions installed:
auto hide Ip 1.0
Better privacy 1.48.3
download helper 4.8
java console 6.0.2
Norton IPS 2.0
Norton toolbar 4.6
quickProxy 2009.07.19
realplayer browser record plugin 1.1.4
stumbleupon 3.64

OWA 2013 : An error occurred while signing this S/MIME message. No certificate was found.

Hi,
I've configured SMIME (certificate templates, signing/encryption certificate, etc.)
All users receive their certificate, and in Outlook (2010) everything is working as expected.
When I use the OWA 2013 however to send an encrypted message, I receive the error :
"An error occurred while signing this S/MIME message. No certificate was found. If you have a smart card-based certificate, insert the card and try again."
environment : exchange 2013 SP1, ie 9 and 10
Get-SMIMEConfig
[PS] D:\Scripts>Get-SmimeConfig
RunspaceId : 24178a41-aead-45fc-a4c2-5504b2541e7e
OWACheckCRLOnSend : False
OWADLExpansionTimeout : 60000
OWAUseSecondaryProxiesWhenFindingCertificates : True
OWACRLConnectionTimeout : 60000
OWACRLRetrievalTimeout : 10000
OWADisableCRLCheck : False
OWAAlwaysSign : False
OWAAlwaysEncrypt : False
OWAClearSign : True
OWAIncludeCertificateChainWithoutRootCertificate : False
OWAIncludeCertificateChainAndRootCertificate : True
OWAEncryptTemporaryBuffers : True
OWASignedEmailCertificateInclusion : True
OWABCCEncryptedEmailForking : 0
OWAIncludeSMIMECapabilitiesInMessage : False
OWACopyRecipientHeaders : False
OWAOnlyUseSmartCard : False
OWATripleWrapSignedEncryptedMail : True
OWAUseKeyIdentifier : False
OWAEncryptionAlgorithms : 6610
OWASigningAlgorithms : 8004
OWAForceSMIMEClientUpgrade : True
OWASenderCertificateAttributesToDisplay :
OWAAllowUserChoiceOfSigningCertificate : False
SMIMECertificateIssuingCA :
SMIMECertificatesExpiryDate :
SMIMEExpiredCertificateThumbprint :
AdminDisplayName :
ExchangeVersion : 0.1 (8.0.535.0)
Name : Smime Configuration
DistinguishedName : CN=Smime Configuration,CN=Global Settings,CN=customer,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=customer,DC=com
Identity : Smime Configuration
Guid : 1184683a-2fcd-446b-98a6-bf0fb16ca282
ObjectCategory : customer.com/Configuration/Schema/ms-Exch-Container
ObjectClass : {top, container, msExchContainer}
WhenChanged : 17/06/2014 14:21:52
WhenCreated : 17/06/2014 14:21:52
WhenChangedUTC : 17/06/2014 12:21:52
WhenCreatedUTC : 17/06/2014 12:21:52
OrganizationId :
OriginatingServer : DC1.customer.COM
IsValid : True
ObjectState : Unchanged

Have you set up a virtual certificate collection? Looks like that's new with Exchange 2013:
http://technet.microsoft.com/en-us/library/dn626158(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/dn626155(v=exchg.150).aspx
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

S/MIME Signed mails links behavior in OWA

Hello all, i'm currently facing a problem with the OWA.
Server: Microsoft Exchange 2010 (Version 14.3, Build 123.4)
Client: Window 7 Pro | Internet Explorer 11.0.9600.17280
Received (signed) mails containing a link will reformat the URL (http://www.google.com)to:
https://b8b17ec8-ad06-44c8-b0d1-54f3ad2ef661/?REDIRECT=x-owacid2://DE530000/jmp:https://myexchangeserver.mydomain/owa/redir.aspx?C=izUaz_SpYUCbjOtKsoTTUkqUyiITsdEIVqUJ4RdfSgu3NdgypHP4h50cXQD6XaFU97sMkfF5BII.&smime=14.3.123.2&URL=https:%2F%2Fwww.google.com%2F
Received (not signed) mails will display:
https://myexchangeserver.mydomain/OWA/redir.aspx?C=izUaz_SpYUCbjOtKsoTTUkqUyiITsdEIVqUJ4RdfSgu3NdgypHP4h50cXQD6XaFU97sMkfF5BII.&URL=https:%2F%2Fwww.google.com%2F
This happens only to signed mails.
Any clue?

yes,
your answer did not match my question.
as i already wrote in my first post:
"How can i configure OWA to display the content of a S/MIME signed message in an unsupported browser
(and probably display the above warning since the certificate cannot be verified)?"
I know in which browsers S/MIME is supported, but OWA does not display the content of a signed (not encrypted!)
in another browser. This behaviour was not there in exchange 2010.

OWA 2013 SP1 - New mail notification sound missing

Can someone confirm that this has been broken in SP1 or do I have a misconfiguration on my servers?
Thank you
Daniel

Hi Daniel,
To add the NewMailNotification event, you need to make changes to the registry.
WARNING: Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall Windows 95 or Windows NT. Microsoft cannot guarantee that problems resulting from the incorrect use of the Registry Editor can be solved. Use the Registry
Editor at your own risk. You should make a backup copy of the registry files System.dat and User.dat before you edit the registry.
Follow these steps to add the Mailbeep setting and associated
sound for mailbeep:
1.
Close any programs that are running.
2.
On the Start menu, click Run. Type regedit and click OK.
3.
In the Registry Editor, expand the following key:
HKEY_USERS\<UserID>\AppEvents\EventLabels
4.
On the Edit menu, click New and select Key.
5.
With New Key #1 selected, type
Mailbeep , and then press ENTER.
6.
With the Key Mailbeep selected, on the Edit menu, click
New and select String Value.
7.
With New String Value #1 selected, type
(Default) , and then press ENTER.
8.
With the (Default) entry selected, click Edit and Modify, and type in the value data
New
Mail
Notification , and then press ENTER.
To add a sound for the Mailbeep event, follow these steps:
1.
In the Registry Editor, expand the following key:
HKEY_USERS\<UserID>\AppEvents\Schemes\Apps\.Default\MailBeep
2.
On the Edit menu, click New and select String Value.
3.
With New String Value #1 selected, type
(Default) , and then press ENTER.
4.
With the (Default) entry selected, click Edit and Modify and type the value data
ding.wav , and then press ENTER.
5.
Click OK and exit the Registry Editor.
6.
Shut down and restart your computer.
For information about how to edit the registry, see the Changing Keys and Values topic in the Registry Editor Help file.
Thanks,
James

I cannot read S/MIME encrypted Mails on iPhone and iPad

I have a Certificate for my email address by Comodo. It is installed in Thunderbird on PC and iPhone and iPad with iOS 7.1.2.
Thunderbird on PC behaves like expected, i can send and read encrypted emails.
On iPad and iPhone i cannot read encrypted emails.
I imported my S/MIME Certificate via email attachment (p.12-File) and activated it in the mail section for my account. I also enabled signature and encryption function.
1. When i receive an email that is signed but not encrypted, the certificate of the sender is trusted & installed.
2. When i receive an email that is encrypted, the same sender is now shown in red color. I cannot read the email, because my profile allegedly does not contain my identitiy.
3. When i try to reply to the signed but not encrypted email (1.) then the message i send is signed but not encrypted, even though the address is shown in blue with a lock (which text info: encryption is possible).
4. When I send an encrypted email to my own account via ipad or iphone, i can read it on both ipad and iphone. This makes me think that the iOS Mail App uses S/MIME encryption a little bit different then Thunderbird.
All of this does not fit together. It think I correctly installed my certificate but there are problems in the Mail Program on iOS.

Solved: the problem was that the emails were encrypted with an old public key.

Exchange 2013 SP1: Public Folders in OWA

Hello!
Tell me please should I be able to use Public Folders in OWA 2013 SP1? I can see them on People tab of OWA, I can send mail to them, but I don't see them on Mail tab (in the folder tree):
Thank you in advance,
Michael

Hello,
In Exchange 2013 OWA, we can only see public folders on Directory by default. If you add public folder under Favorites, please follow the Martina's suggestion.
Besides, you can't create or delete public folders.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Viewing attachments in Public Folders in Exchange 2013 SP1 OWA

Hello!
Tell me please should the file preview work in Public Folders (for example for docx files) in OWA 2013 SP1? This file can be easily opened in MS Word but clicking the
Preview leads to the following error:
Thank you in advance,
Michael

Hi Jessie,
Thank you for your help!
"To preview these files in Inbox in OWA, Exchange 2013 could has its own process to achieve this function. I tried it in Exchange 2013 CU1 environment, it is also working when previewing these files in the Inbox
in OWA." - that's the only possible explanation... but it means this article is not correct:
http://technet.microsoft.com/library/2591b1be-92c4-4192-9f5e-e4e6b319170a"
"By default, the following file types are displayed
using Office Web Apps Server:
Word documents (doc, docx, dotx, dot, dotm extensions)
Excel documents (xls, xlsx, xlsm, xlm, xlsb extensions)
PowerPoint documents (ppt, pptx, pps, ppsx, potx, pot, pptm, potm, ppsm extensions)
...cause I can preview files without Office Web Apps Server. Why there's no corresponding information on technet?
To put it mildly, documentation for Exchange 2013 is rather strange...
Regards,
Michael

Edge 2013 sp1 with exchange 2010 organisation.

Dear reader,
I have an exchange 2010 sp3 organisation with 1 client access server with hub transport and a 2 node DAG. Can I install a stand alone exchange 2013sp1 Edge role on a seperate machine in DMZ and subscribe the exchange 2010 hub transport to it. This
in preparation to move to exchange 2013sp1 later this year. The current exchange 2010 edge role is installed on a TMG 2010 machine. Since TMG 2010 is dropped and we also have issues with the current edge's mailflow, i'd like to have a dedicated Exchange edge.
Best regards,
Ruud Boersma
MCITP Enterprise administrator

Sure, You can install Edge of Exchange 2013 on a dedicated server in DMZ and subscribe with Exchange 2010 Transport server.
Or you can allow the Existing Exchange 2010 Edge server to serve your internet mail flow till the time you implement Exchange 2013 in the environment. I would suggest Exchange 2013 CU5 as a lot of issues were fixed in that which were identified with Exchange
2013 SP1.

Lync 2013 SP1 64 bit crashes on Windows 7 Enterprise 64bit SP1

Systems Involved:
Dell OptiPlex 9020 All in One (080) –Crashes Lync 2013 64bit SP1
Dell OptiPlex 9020 All in One (081) –Crashes with Lync 2013 64bit SP1 -Working okay with 2010 so far
Dell OptiPlex 9020 All in One (083) –Clean install Seems to be working okay
Details of the problems
I have a put in place 2 Dell OptiPlex 9020 All in One’s both with network card Intel I217-LM.
The first system (080) I put place crashed several times before, I put a different new 9020AIO (083) that I created a new with clean install from disk of Windows 7 and Office 2013 64 bit with Lync 2013 64 bit upgraded to SP1. After having this
system side by side with the system that was crashing all the time and network capturing software installed on the new system this issue appeared to disappear. The user has not reported an issue with Lync 2013 in three to 4 weeks.
After thinking this was an issue with Office 2013-upgraded SP1. I decided to create a new image Windows 7 and Office 2013 64 bit SP1 intergraded .iso from web store. (Not upgraded) thinking there was something wrong with the SP 1 upgrade the way I intended
it to work. I reimaged the other 9020’s I have including the one (080) that was having the crashing issues.
The second system (081) is a new image I created, the system got some office updates from the WSUS it should not have been updated with and Lync 2013 was also crashing. I decided to reimage (080) a clean format with the new image. I put this system in
place for the user knowing it was clean install and not have any issue but for the last 2 weeks Lync 2013 has crashed.
I did take their old system back to my desk and was able to get it to crash as well. I decided to see if this problem was with Lync so I installed Lync 2010 I have not seen issue with 2010 yet.
I have also rolled out 2 Dell OptiPlex 7010 towers with the same image as above with no issues so it seems like this issue is only related to the 9020AIO.
Issue:
The computer will operate fine for most of the time but Lync 2013 will crash with not responding, please sign into Lync on the phone (Plantronics D540m). I get windows circle thing spinning and Lync is not responding if you close the
program it will try to run solution finder but there is not anything that will help. The only way to fix this issue is to reboot at this time. At first I thought it was the network driver issue for Intel I217-LM but after installing the usb network
adapter I believe the issue is something related to Lync 2013 SP1
Things I have tried
1. System Event : Application Log pulled I will include below in this message
2. 9020 with Intel I217-LM
3. Update driver version = to current version
4. Change power management settings as outlined http://en.community.dell.com/support-forums/desktop/f/3514/p/19523337/20460673.aspx
5. Disable Wireless and Bluetooth
6. Reset users Lync account
7. USB Network Adapter.
Event Logs:
1.The program lync.exe version 15.0.4569.1503 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1be4
Start Time: 01cf5a40e5452e63
Termination Time: 60000
Application Path: C:\Program Files\Microsoft Office\Office15\lync.exe
Report Id: 11c8f99b-c65d-11e3-b675-c4d98743ad3b
2. Fault bucket, type 0
Event Name: AppTermFailureEvent
Response: Not available
Cab Id: 0
Problem signature:
P1:
P2:
P3:
P4:
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Windows\Temp\WER3076.tmpatk.kdmp
C:\Windows\Temp\WER3077.tmp.appcompat.txt
C:\Windows\Temp\WER30A7.tmp.xml
C:\Windows\Temp\WER3125.tmp.WERInternalMetadata.xml
C:\Windows\Temp\WER3126.tmp.hdmp
C:\Windows\Temp\WER4208.tmp.mdmp
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Kernel_0_0_cab_0a244260
Analysis symbol:
Rechecking for solution: 0
Report Id: f6cda468-d60a-11e3-a941-c4d98743ad3b
3. Fault bucket 24029667, type 22
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: lync.exe
P2: 15.0.4569.1503
P3: 52b0bd5c
P4: ac33
P5: 1
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Users\netid\AppData\Local\Temp\WERFA2A.tmp.appcompat.txt
C:\Users\netid\AppData\Local\Temp\WERFE21.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\netid\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppHang_lync.exe_fe2cd4e98d389da9ae67bda6ac81af366f458bb6_11cc0947
Analysis symbol:
Rechecking for solution: 0
Report Id: ec8f9268-d60a-11e3-a941-c4d98743ad3b
Then I get about 10 Office Software Protection Platform before the above error logs occur.

Does the issue disappear when you uninstall the update?
If so, it seems that the Lync update is incompatible with your computer.
Please try to uninstall Lync 2013 SP1.
Lisa Zheng
TechNet Community Support

My e-mail is corrupted and I can no longer access so what is wrong? It works on other browsers so Tech support said problem lies in browser. ps I have printed

Not sure how long ago...a few weeks...I thought it was a problem with bell provider so went there first.
They did diagnostics and recommended I contact you since I can obtain my e-mail through other browsers. I can access internet without difficulty but when I sign into e-mail account through hotmail my e-mail page is jumbled and looks skeletal. I cannot access any of the messages as if I press on any one it does not come up. I have taken a screen print but I do not know how to import it here. I imagine it is some interaction between your browser and my computer but I am clueless as to how or where to start....
Doris S. Bauer

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Outlook 2013 SP1 S/MIME signature requires entering password twice

Since updating to Outlook 2013 SP1, every time I send an S/MIME signed email I'm prompted for the password twice. Prior to SP1, I was prompted once per email (I have PrivKeyCacheMaxItems=0, as I do want to be prompted for each email). Has anyone else
experienced this behavior? Is this a bug in SP1 or is there a configuration change to get the "once per email" behavior back?
Outlook 2013 (15.0.4569.1503) MSO (15.0.4569.1506) 64-bit.
Windows 7 Ultimate SP1 w/ all Microsoft Update patches.

As I remember, we don't need to type any password when we send an S/MIME signed email. Could you help to show the titile of pop-up windows? Better to capture a screenshot and post here.
By the way, does it happen in a new creating profile. And I've never heard the service pack 1 would be the root of this issue. Remove the SP1 to check if the issue would be gone in your machine if necessary. Thanks.
Tony Chen

Exchange 2013 SP1 & Custom OWA Theme

On Friday of last week we updated from Exchange 2013 CU2 to Exchange 2013 SP1. Since updating our custom OWA theme no longer works. We configured it according to the following guide:
http://technet.microsoft.com/en-us/library/bb201700(v=exchg.150).aspx
The theme we customized was stored in the following location:
\Client Access\OWA\version\Owa2\resources\themes\"title of our theme"
Themes no longer appear to be stored in this location and I am uncertain as to where they have moved and how to apply them. Has anyone else run into this issue?

Hi,
Can we try to re-importing the theme again?
Thanks
Mavis
Mavis Huang
TechNet Community Support

Exchange 2013 SP1 Not Receiving e-mail

Hello,
Mail flow between Exchange 2010 sp3 & Exchange 2013 SP1 (update Cu5) not working.
Exchange 2013 setup is Exchange 2013 sp1 DVD
Exchange 2010 when sending mail to external it's ok.
Exchange 2010 when sending mail to exchange 2010 users it's ok.
Exchange 2013 when sending mail to External it's ok.
Exchange 2013 when sending mail to exchange 2010 users it's ok.
or
Exchange 2010 when sending mail to exchange 2013 not working
Exchange 2013 when sending mail to Exchange 2013 not working
From internet --> SMTP GW (exh edge) --> Exchange 2010 it's ok
From Internet --> SMTP GW (exh edge) --> Exchange 2013 not working.
organization;
1 AD site and 1 PDC (2012 R2) + 3 DC (1x 2008 R2 + 2 x 2003 Server) (Windows Server 2003 domain fl)
With Exchange 2010 exchange 2013 on the same subnet. Exchange 2010 physical machine, Exchange 2013 physical machine ( eth Microsoft Team Server 2012 R2 )
All server is region setting Turkey
Exchange 2010 error
451 4.7.0 Temporary server error. Please try again later. PRX4
Exchange 2013 error
451 4.4.0 primary target ip address responded with 501 5.5.4 Invalid arguments. attempted failover to alternative host, but that did not succeed. either there are no alternate host, or delivery failed to all alternate hosts. Th
thanks

Hi,
From your description, the Exchange 2013 server can't receive emails internally and externally. I recommend you follow the steps below for troubleshooting:
1. Please restart the Microsoft Exchange Frontend Transport service on CAS and the Microsoft Exchange Transport service on Mailbox and check the result.
2. Please make sure that the authentication on default receive connector is right. Here is the configuration in my environment for your reference:
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

MailboxInSiteFailoverException - OWA session error on database *over (Exchange 2013 SP1)

Hi all, I have noticed an issue with OWA when database(s) are failed over between DAG members. The environments in question (issue can be reproduced in separate implementations of 2013 SP1 all-role servers) are 2 or more DAG members within the same
AD site/subnet. These are also fresh implementations with SP1 and not upgraded. Exchange servers are load balanced via Netscaler.
So to the issue - OWA users experience the below "..MailboxInSiteFailoverException" message when the database copy is activated. Exchange does not immediately proxy the requests to the active database. You can wait several minutes and
the issue is resolved by refreshing the browser or if you recycle the MSExchangeOWAAppPool on both DAG members, the issue is resolved immediately (OWA session re-established on refresh).
Testing so far involved opening multiple OWA sessions and activating a database copy. At that point, upon refresh of the browser the below error is shown (in all test browsers/sessions below) where I would expect any DAG member to be able to proxy
the client request to the active database server immediately (and not after several minutes).
https://netscaler_LB/owa
https://ex2013server-1/owa
https://ex2013server-2/owa

Hi Simon, I have tested with no firewall on the exchange servers and on client machines within the same subnet as the servers. All with the same results.
I can see many ASP.NET 4.0.30319.0 Event ID 1309 logs similar to this and other threads (http://social.technet.microsoft.com/Forums/windowsserver/en-US/c938dda0-b3bc-4544-851e-f27b503cf4ed/exchange-2013-event-id-1309-source-aspnet-40303190).
IIS logs show similar monitoring mailbox issues but I am still currently looking through the logs. Thanks for your input.
2014-03-30 00:00:23 127.0.0.1 POST /owa/proxylogon.owa - 444 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING;+OWADEEPTEST) - 401 0 0 13
2014-03-30 00:00:23 127.0.0.1 POST /owa/proxylogon.owa - 444 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING;+OWADEEPTEST) - 401 0 0 13
2014-03-30 00:00:23 127.0.0.1 POST /owa/proxylogon.owa - 444 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING;+OWADEEPTEST) - 401 1 2148074254 0
2014-03-30 00:00:23 127.0.0.1 POST /owa/proxylogon.owa - 444 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING;+OWADEEPTEST) - 401 1 2148074254 0
2014-03-30 00:01:23 ::1 POST /owa/proxylogon.owa &ex=UE:Microsoft.Exchange.Data.Storage.IllegalCrossServerConnectionException 444 DOMAIN\SM_3ce57cd622aa4655a ::1 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING;+OWADEEPTEST)
- 302 0 0 47
2014-03-30 00:01:23 ::1 POST /owa/proxylogon.owa &ex=UE:Microsoft.Exchange.Data.Storage.IllegalCrossServerConnectionException 444 DOMAIN\SM_2891f9d41af2422e8 ::1 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING;+OWADEEPTEST)
- 302 0 0 47

OWA 2013 SP1 read S/MIME signed mails on other browsers

Similar Messages

Maybe you are looking for