OWA Blank Logon Page After Update Rollup 12 for Exchange 2007 SP3

Hello
After installing Update Rollup 12 for Exchange 2007 SP3, can no longer access OWA - internally or externally through Internet Explorer -  I just get a blank page (with IE). If I use Chrome or Firefox, and it uses the basic logon, I get a page with just
text, and am able to logon successfully. I have looked at several related forums, but have not found a fix yet. I've seen several people with similar issue have had success by copying contents from a previous owa folder version to the latest one, then running
Updateowa.ps1 and restarting IIS. This did not resolve the issue for me.
Another forum suggested running remove-owavirtualdirectory and
new-owavirtualdirectory, however I haven't attempted that yet, as I'm unsure how I could reverse the changes that the command runs if things get worse.
Any assistance will be appreciated.

Hi,
I encountered a same situation,after recreating
the virtual directory, the issue was solved.
The following article for you reference:
How To: Recreate OWA Virtual Directory – Exchange 2007
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Similar Messages

  • Latest Update Rollup for Exchange 2010 SP3

    Hi
    Currently we are using RU2 for Exchange 2010 SP3. We are facing an issue with OWA through IE 11 (no support for premium). To correct this issue it's recommended to install RU3. Here we are asking the expert opinion about installing RU7
    on all Exchange 2010 servers and whether it makes any different issues or is it enough to install RU3
    Thanks in advance
    LMS

    Hi
    Currently we are using RU2 for Exchange 2010 SP3. We are facing an issue with OWA through IE 11 (no support for premium). To correct this issue it's recommended to install RU3. Here we are asking the expert opinion about installing RU7
    on all Exchange 2010 servers and whether it makes any different issues or is it enough to install RU3
    Thanks in advance
    LMS
    Personally, if you are going to update the servers, you should apply the latest RU regardless. So I would go with RU7.
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Update Rollup in Exchange 2007 SCR environment.

    Dear Experts. 
    I am going to install Rollup 12 for Exchange 2007 SP3, so could you please confirm if any issue with Rollup 12 Exchange 2007 SP3?
    Could you please advise to update Rollup in Exchange 2007 SCR environment with CCR.? I would appreciate. If you provide step by step
    process, Thanks
    Regards Vijaya Babu S | MCITP | MCTS | MCP| MCSA

    Hi Vijaya,
    Based on my known, Exchange 2007 SP3 Rollup 12 doesn't have a known issue so far.
    About the steps of update Exchange 2007 SCR with CCR, please follow the above article Mike provided.
    What's more, I recommend you make a complete backup of the clustered mailbox server prior to applying the update rollup and again after successfully applying the update rollup.
    Here is an article for your reference.
    How to Install Update Rollups in a CCR Environment
    http://technet.microsoft.com/en-us/library/bb885047(v=exchg.80).aspx
    Hope it helps.
    If you need further assistance, please feel free to let me know.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Oracle report out of order after update Rollup for windows 2000 sp4

    hi
    i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformated fashion. in order to print the report correctly i have to remove the patch from the windows. Is there anyway to print the report without uninstalling windows patch?
    thanks

    Hi
    first of all thanks for replying .if you mean defining page size in files like wide180.PRT in printers folder in oracle directory, off course i have set parameters. thing is that printing works fine without windows patch but it gets deteriorated after installing the patch.
    Thanks

  • Help!  oracle report out of order after update Rollup for windows 2000 sp4

    hello once again
    i haven't received any solution of my problem, so i am again uploading it.
    ----PROBLEM IS GIVEN BELOW-----
    i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformatted fashion. in order to print the report correctly i have to remove the patch from the windows.i have set all parameters and
    defining page size in files like wide180.PRT in printers folder in oracle directory.
    Is there anyway to print the report without uninstalling windows patch?
    thanks

    I don't have any idea about this issue. Maybe someone else on this forum can help. Meanwhile, there are couple of places you can search for this issue:
    Search google for printing issues with this patch
    Search Microsoft forums for Windows 2000
    And if you have metalink account, search metalink forum, document/note or open a SR for this.

  • Exchange 2007 SP3 latest update rollup

    I would like to install the latest update rollup for Exchange 2007 SP3.  I was reading and found Update Rollup 12, is this the latest version?  No other update rollups are installed.
    I did the SP3 update by installing on the hub transport first, then the 2 mailbox stores.

    Hi,
    Update Rollup 13 for Exchange 2007 SP3 has been released on 25th February 2014.
    Rollup 13 for Microsoft Exchange 2007 SP3 can be downloaded here:
    Update Rollup 13 for Exchange Server 2007 Service Pack 3 (KB2917522)
    Informations about changes you can find here:
    Description of Update Rollup 13 for Exchange Server 2007 Service Pack 3
    One thing we need to take into consideration is the order to apply update on our Exchange servers, it should be the following:
    1. CAS  (if you have multiple sites, internet facing sites first)
    2. Hub
    3. MBX
    Hope this helps.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Cannot connect to OWA after Exchange 2007 SP3 and Rollup 13 install.

    Hi,
    Our OWA website isn't accessible after we installed SP3 and rollup update 13 for Exchange 2007.  When we attempt to visit the OWA URL, all we receive is HTTP 403.4 SSL is required to view this resource.  Doug

    Hi,
    I recommend you follow the steps below for troubleshooting:
    1. Open IIS Manager, click Default Web Site -> Authentication, make sure that Anonymous Authentication and Windows Authentication are enabled.
    2. Click Default Web Site -> SSL Settings, check "Require SSL" and click Ignore.
    3. Click Default Web Site -> HTTP Redirect, check Redirect (enter your
    https://URL), check "Only redirect" box and Status code Found 302.
    4. Expand Server Configuration -> Client Access ->double click owa ->Authentication tab. Check the Basic Authentication and check the Use forms-based authentication button Logon Format: Domain\user name.
    What's more, here is a thread for your reference.
    Exchange 2007 SP3 Rollup 2 installed - OWA stopped working
    http://social.technet.microsoft.com/Forums/en-US/8481eb3d-a6ab-42fc-b7ea-fa9a9a625e48/exchange-2007-sp3-rollup-2-installed-owa-stopped-working?forum=exchangesvrdeploylegacy
    Hope it helps.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • Unable to install rollup4 for Exchange 2010 SP3

    Hi,
    I'm unable to install KB2905616 on my multi-role Exchange 2010 SP3 server. The setup wizard gets stuck at "the setup wizard is generating native images for .NET assemblies........"
    I know that this process will take some time to complete but I have waited 10 hours.
    I've tried to reboot the server and restart the setup.
    Exchange is functioning perfectly otherwise.
    Any help would be greatly appreciated :)
    /Søren Emig

    Hi,
    I recommend you check if the anti-virus has been disabled before you start the upgrade process.
    If you didn't ,the update could fail or take an extended amount of time. 
    Also, disable all other third-party apps/plugins that might be installed (like backup agents).
    In addition,the following articles for your reference:
    Install the Latest Update Rollup for Exchange 2010
    When you install an update rollup package, Exchange tries to connect to the certificate revocation list (CRL) Web site. Exchange examines the CRL list to verify the code signing certificate. (To download and view the CRL list, see
    CodeSignPCA.crl.) If Exchange can't connect to the CRL Web site, the following symptoms may occur:
    The installation takes a long time to complete.
    You receive the following message during the installation: Creating native images for .Net assemblies
    When Exchange isn't connected to the Internet, each CRL request must complete before the installation can continue.
    To work around this issue and to reduce installation times, turn off the
    Check for publisher’s certificate revocation option on the server that is being upgraded. Use the following steps:
    Start Internet Explorer.
    On the Tools menu, click Internet Options.
    Click the Advanced tab, and then locate the Security section.
    Clear the Check for publisher’s certificate revocation check box, and then click
    OK.
    After the update rollup installation is complete, select the Check for publisher’s certificate revocation option.
    Generating NGEN images takes longer than expected
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • OWA Page breaks after Installing the Rollup 11 on Exchange 2007 SP3

    I have applied the Update Rollup 11 on my Exchange 2007 SP3 and after updating the Rollup  I am able to login to OWA but the it has broken the graphics and all the folders with X icon and cant get inside the folder/mail.
    We use RSA token for the sign in
    I had tried replacing the OWA folder from the backup and it did not helped.
    Any suggestions will be really appreciated.
    Regards,
    Sudheesh Rajan

    Hi,
    If the problem happens after installing rollup, please uninstall it and then reinstall.
    Most of these problem happen if certian dll files reatling to OWA are not registered or missing. To quickly resolve this problem, you can try to apply the latest SP or reinstall CAS server.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?

    Quick question. 
    What is the total space Update Rollup 7 For Exchange 2010 SP3 (KB2961522) will take after installation?
    Hasan

    Hi
    Your question is a big vague. Extracting the rollup will use some space but you can delete the files afterwards.
    Are you concerned about space while installing? If you have adequate space it shouldnt be a problem.
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    I am asking space after installation, it will definitely install some files so how much space extra space it needed in exchange directory drive. 
    Hasan

  • October 2014 update rollup for Windows Server 2012 R2 and Data Protection Manager 2012 R2

    Hello all,
    After installing the October 2014 update rollup for Windows Server 2012 R2 (KB2995388) on our Windows 2012 R2 Core Edition backup jobs of System State start to Fail, below the generic error:
    The replica of Non VSS Datasource Writer on hostname.domain is inconsistent with the protected data source. All protection activities for this data source will fail until the replica is synchronized with consistency check.
    The job was cancelled. The user either cancelled the job or modified the associated protection group.
    Removing the update rollup all jobs complete without errors. Somebody is expiriencing the same issue? How can we resolve the problem?
    Thnks, Andrea

    Hi Andrea,
    Have you installed the update 2919355?
    To apply update 2995388, you must first install update 2919355 on Windows 8.1 or Windows Server 2012 R2.
    According to the official website, the issue which you described is not listed as the known issue.
    Please uninstall this update and continue to monitor the official website for the latest news.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • HT4623 I can not get past the license agreement and term and conditions page after updating my i5 IOS

    I can not get past the license agreement and term and conditions page after updating my i5 IOS

    Restart your phone and if that doesn't help, reboot the device.
    Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

  • Receive Connector stopped working after Update Rollout 2 for Exchange 2007 SP2

    One of the Exchange 2007 servers receive connector has stopped working since installing the latest rollout update for Exchange 2007 SP2 - for some reason the following error is received (when troubleshooting on the adjacent server) :
    "Remote server server.domain.co.uk failed the mail acceptance test. MAIL FROM command: Respond = 530 5.7.1 Client was not authenticated."
    Most admins will know you usually get this when first setting up Exchange and the receive connector not allowing anonymous connections. But our setup has been working for well over a year with no problems. Even enabling anonymous connections still doesn't fix the problem.
    Our setup is 2 exchange servers across 2 sites, with the problematic server never receiving email from the internet, only from the other Exchange server (which is internet facing). The above error is received when the internet facing server is relaying email over to the problematic server. Though in the message queue the following error is received:
    "SMTPSEND.DNS.NonExistantDomain; nonecistant domain"
    After testing DNS that all seems fine, so I don't believe it's a DNS problem.
    Any ideas why this would happen?
    Thanks,
    Matt

    Hi Matt....
    To receive e-mails from the external servers or domains or clients, you can setup a new receive connector on Hub Transport Server. To do this task, you can go through the steps mentioned in this blog....
    https://mailsolutions.wordpress.com/2015/02/06/resolving-error-530-5-7-1-client-was-not-authenticated-with-receiver-connector/
    Hope this will work
    Thanks

  • I can't pass the icloud terms and conditions page after updating ios7

    Hi, I need urgent help!
    I can't pass the icloud terms and conditions page after updating ios7
    I've tried agree disagree and every other button i could press but it just wouldn't go pass the page
    Is there anyone who can help me with it?

    There are several solutions you can try in this discussion: https://discussions.apple.com/thread/5321627?start=0&tstart=0.

  • HT1365 How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again

    How can I get my iPhone 4 to update my updates from my app store of it keeps telling me error 3150 or it tell me to refresh the page after updates and the updates are still there asking me to update them again?

    Make sure iTunes on the computer is logged into the account on the phone.
    Plug the iPhone in.
    In the popup window warning about wiping your phone, hit cancel.
    In the left pane of iTunes, the phone icon should be there.
    Right click on it, select transfer purchases.
    Note: this will only transfer music bought from iTunes. Not mp3's from amazon or ripped from CD's.

Maybe you are looking for