OWA Calendar want to display a link to other users shared calendar that was created in Sharepoint at login

Site is using Office 365.  They do not have the actual Office apps on their PC's, they access everything via OWA.  (sorry if I did not use correct nomenclature).
Users currently access calendars etc, by accessing the site's SharePoint site after login to the Microsoft Portal (https://login.microsoftonline.com).  Then going to "site contents", and then
accessing the calendar that was created.  Just a generic calendar that they use to schedule a conference room.  They log into O365 Portal, and just drill down.
What the users' WANT to be able to do, is access the calendar off of their initial OWA screen that they get when they log into the portal.  At worst, just go down to "calendars" break it out, and click on "conference room calendar"
or whatever.  I tried to do a copy and paste of the link from the page that has the calendar displayed, into a new link, but that did not bring up anything.
So, to recap, the site is not using AD, they are all on generic Win7 and Win8 PC's that are not in a domain.
They do not have Office on their computers.  They use OWA for everything.
They do not want to drill down to calendars etc after login to access these resources, they want to be able to just click on a link on their OWA main default page they get when they initially log into the O365 portal, and get what they want.  Not
drill down to the SharePoint shared calendar, which is only four clicks, but they don't want to have to do it. Whay want "ease of access".
Thanks for your help.
Rick

You can move the iTunes folder to a separate drive on your pc an then configure each account to use this drive / folder as iTunes library ... The problem is, that iTunes by default stores everything in your personal music folder which is separate for each user account in windows (and by default is on "C" drive).
I create a separate partition on every pc/laptop (and map a drive name) where I store music, videos and other mass data. This will also keep the "C" drive small, which is backed up from time to time and so my backup is also small.

Similar Messages

  • Using a checkbox in numbers- if,then, I want to display today's date if checked, and keep that date, the day it was checked, not the current day

    Using a checkbox in numbers- if,then, I want to display today's date if checked, and keep that date, the day it was checked, not the current day

    this will not work.  Numbers does not provide a timestamp.  you can, however, enter the formula "=now()" in any cell, then copy that same cell, then paste (using the command "Edit > Paste Formula Results"
    If you need a time stamp often,
    make a single cell table with the formula (mentioned earlier).
    and copy and paste as needed

  • Add a note to a Calendar event that was created from Mac Mail

    When I create a Calendar event by clicking on a date within a Mac Mail message (you hover over a date in an email it draws a dashed box around the date and gives an option to create a Calendar event).  It creates an Event in my Calendar with the following fields:  Subject, Location, Date Time and alert fields, Invitees and a link to the mail message.  But - I can't seem to add a Note Field.  The only work-around seems to be to manually create a new calendar entry.
    Does anyone know how to modify an event created from Mac Mail to add a Note Field?
    iMac Retina 5K 27-inch Late 2014, OS X Yosemite Version 10.10.3, Calendar Version 8.0 (2034.9), Mail  Version 8.2 (2098).

    Thanks Brett for replying, but this doesn't work if the event is created by Mac Mail - which is my issue.  Sure it works with any other event but not one that has been created from within Mail.  If this is a bug I'm sure the Calendar people point the blame at the Mail people and vice versa but that doesn't help me.  But before I submit a report to Apple I thought I would see if I might be missing something obvious.
    See the attached screenshot of an event that was created by Mac Mail. There is no Add Notes field when the event is Double Clicked, Right Clicked or any other form of click.
    Graeme.

  • I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

    I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
    I have tried back ups and  restoring, resetting, and even updating the pages app. And nothing has worked.

    I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
    I have tried back ups and  restoring, resetting, and even updating the pages app. And nothing has worked.

  • HT1848 i formatted my computer and now i would like to sync my music from my iphone back to the computer, is there any way to do this? i don't want to loose my music. p.s. all my music that was on the computer was there privately, i did not get it from it

    i formatted my computer and now i would like to sync my music from my iphone back to the computer, is there any way to do this? i don't want to loose my music. p.s. all my music that was on the computer was there privately, i did not get it from itunes.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I have a file that was created in FH 11 and I am using same version.Originator opens file and everything is fine and also earlier version opens it fine.when I open it the links shift 1/8" up and left.Has anybody had this happen to them

    I have a file that was created in FH 11 and I am using same version.Originator opens this file and everything is fine and also an earlier version opens it fine.When I open it it shifts the links 1/8" up and to the left.Has anybody ever had this happen to them?

    What file format(s) are the "links"?
    If raster images, do they contain clipping paths or transparency?
    What is your platform and OS?
    Were the FH documents created on the same platform (Mac or PC) as the one you are currently using?
    Were the linked files created on the same platform (Mac or PC) as the one you are currently using?
    Can you reproduce the problem with a newly created document and the same linked images?
    There was once an issue with transparent 1-bit TIFF images shifting, but I believe that was in a previous version of FH.

  • How do I keep a document that was created on another computer? I have the link.

    How do I keep a document that was created on another computer. I have the link. https://adobeformscentral.com/?f=Mv9KGJZhLFi47Q-H63fajA

    Hi,
    The link you provided is for the HTML fillable form. Is that what you are trying to download?
    FormsCentral form files are stored on the FormsCentral servers. If you are the author or a co-author of the form you can access it from any machine by logging into FormsCentral. If you aren't the author or a co-author of the form you will need to contact the author and have them share the form with your FormsCentral account. The following FAQ explains how to share forms with other users:
    http://forums.adobe.com/docs/DOC-2462
    Regards,
    Brian

  • HT201401 Yesterday when I turned on my iPad there was icon that ask do I want to upgrade IOS  well I didn't know what that was so I said yes . Well every since my iPad gas gone crazy . When I go to a send button it keeps showing the copy and paste icon ov

    Yesterday when I turned on my iPad there was icon that ask do I want to upgrade IOS  well I didn't know what that was so I said yes . Well every since my iPad gas gone crazy . When I go to a send button it keeps showing the copy and paste icon over the button . Today I was sending a phone load to friend . It was a $3.85 load . But button kept showing that stupid copy and paste icon so I kept pushing the button . Well I ended up sending $3.85 three times . How do I get the upgrades out or how do I fix my iPad ?

    What does this have to do with iPhones much less using them in an Enterprise environment?
    Try posting to the correct forum.

  • Want to display a still image if user cannot see Flash

    I am looking at all the various Flash detectors and am a bit overwhelmed. Most of the info I find is from 2008 and before so I am afraid it is outdated.
    I want to be able to detect if a user has flash plugin and if not then display a still image. I am concerned that I-phone users are not seeing the flash embed in my site.
    What is the currently recommended solution?

    Nevermind the above question.... I found my answer at a different source.

  • In TABControl On Click of button i want to open view linked to other TABITE

    In a TABControl view
    On the first tab i have HOME view with a button
    and on second tab i have SEARCHRESULT view i.e a tableview
    on click of button on HOME view i want to open SEARCHRESULT view???
    How to call a View Linked to other TABITEM???
    Thanku

    Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • Users cannot edit a shared calendar of a shared mailbox that was deleted from the cloud and recreated on premise

    Description:
    The following example account [email protected] is an on premise AD account being used as a shared mailbox in the cloud. We have discovered that regardless of what we do, not a single user can edit the calendar entries.
    The following message is shown in Outlook Click to Run 2013 when an entry. "New appointment" button is also greyed out, including "Calendar Permissions" and some others.
    This problem started when the shared mailbox was created wrongly by creating it in the cloud first and we had to delete it and start over. The "in the cloud" user was deleted and the same user was created in AD on-premise with the same account name
    and then Dir Synced with the cloud. A license was assigned, a user mailbox on exchange online created and the type was converted to a shared mailbox and Editor rights were defined on the calendar folder for specific users.
    Actions performed:
    Action01: gave users Editor rights on calendar folder through powershell
    Result01: Rights correctly added and can be seen when get-mailboxfolderpermission is ran
    Action02: Opened calendar with Outlook and tried to edit entries
    Result02: Error message pops up saying "You don't have permission to create an entry in this folder. Right click the folder and check..."
    Action03: Opened calendar with OWA of users
    Result03: Users can edit the shared calendar on OWA
    Action04: Gave users Full Access permission on mailbox with automapping on
    Result04: Users can edit calendar in Outlook
    Action05: Gave users Full Access permission on mailbox with automapping off (mailbox no longer visible in outlook)
    Result05: Users cannot edit calendar in Outlook
    Action06: Removed Full Access permission on mailbox for users
    Result06: User cannot edit calendar in Outlook
    Action07: Removed [email protected] from on-premise AD, performed dirsync, removed account from ms online using remove-msoluser -removefromrecyclebin
    Result07: No trace of the account was anywhere to be found.
    Action08: Created new [email protected] account on on-premise AD, assigned o365 license to user including exchange online license
    Result08: New empty Exchange online mailbox was created
    Action09: gave users Editor rights on calendar folder through powershell
    Result09: Rights correctly added and can be seen when get-mailboxfolderpermission is ran
    (Note: whenever mailboxfolder permissions are modified for this mailbox it's as if they are ran THREE times in a row, the first time they are applied and the powershell gives immediately 3 exceptions behind this:
    An existing permission entry was found for user: [email protected]
        + CategoryInfo          : NotSpecified: (:) [Add-MailboxFolderPermission], UserAlreadyExis...nEntryException
        + FullyQualifiedErrorId : [Server=DBXPR05MB046,RequestId=3b3e080e-9aaf-4db9-9b90-b7171d59eba2,TimeStamp=7/11/2014
       8:15:39] [FailureCategory=Cmdlet-UserAlreadyExistsInPermissionEntryException] 57078FCD,Microsoft.Exchange.Manageme
      nt.StoreTasks.AddMailboxFolderPermission
        + PSComputerName        : outlook.office365.com
    Any other mailbox does not do this when setting mailboxfolder permissions)
    Action10: Opened calendar with Outlook and tried to edit entries
    Result10: Error message pops up saying "You don't have permission to create an entry in this folder. Right click the folder and check..."
    Action11: Tried on a fresh new pc with first time logon
    Result11: did not help
    Additional information:
    We have seen this problem with another user which was recreated, when he shares his calendar with others and people get the calendar invite email and click "Open Calendar" they receive a popup "The folder cannot be found".
    My first impression points to a corruption/bug in the GAL on exchange online, since we're using o365 for midsize bussinesses we cannot use the AdressList role to expose the adresslist cmdlts for deeper troubleshooting.
    PS:
    Issue tested on different computers and with different user accounts, not a single user can edit the calendar of [email protected] when editor rights are given.
    Noticed when editing rights for the shared mailbox in powershell after the first confirmation line
    Office 2013 is click to run was updated to latest version, version number: 15.0.4659.1001

    Greetings Gil,
    I haven't heard of that one.
    Questions:
    Does the calendar in question show up in the "Subscriptions" category of iCal?
    If you remove all accounts from iCal > Preferences > Accounts and quit and re-open iCal, does the calendar in question vanish? If so, does the calendar come back when you re-input the servers you need into  iCal > Preferences > Accounts?
    Can you provide a screen shot of your calendar sidebar.
    While you answer those questions, some troubleshooting to try:
    Try dragging one of your other calendars above this calendar that won't delete and then quit / re-open iCal and attempt to delete the calendar in question.
    Failing that:
    1. First make an iCal backup:  Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    2. Go to iCal > Quit iCal
    3. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    4. Launch iCal and test.
    If the issue persists at this point:
    Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    ---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    Hope that helps!

  • How can I create links to other pages in iBooks that will function in PDF?

    Hi,
    I know some people have asked previously how to create links to other pages of their book within iBooks. I having an issue with this myself that I haven't been able to resolve. I am able to create the links, and they seem to function within the program, however, once I export the document as a PDF file (the format in which I need to have this ebook!), the links seem to be non-functional. Does anybody have a fix for this?
    Thank you so much for any suggestions you may have!! I really need to figure this out for my client.
    Regards,
    Meggyn

    Exporting as a PDF does alter/lose/remove certain functions. Adobe Acrobat has its own page navigation system.
    A lot of the hidden engine of iBooks Author is basically very similar to building a website! so links and books marks are an "internal" function.
    IF you  have Acrobat and not just the Adobe Reader, you can make links.  I have never needed to try, but  I see a working link related index  in the many software manuals  I have.

  • Display Shopping cart of other Users in SRM 7.0

    Hi Experts,
    I saw that, we can only see ours Shopping Carts only and not other Users in SRM 7.0 in POWL.
    Can it possible to see others Shopping Cart ? If yes How ? and where is setting ?
    Thanks
    NAP

    Hi NAP,
    If you want to see others shopping cart, probably you are looking for team shopping cart functionality. In team shopping cart, the shopping cart creator can define his team and all the members of the team can see the shopping cart. At any point of time, they can take over the shopping cart and do the follow-on activities for the cart.
    You have to enable the team shopping cart functionality in 'define transaction types' for your shopping cart. On activating the option, when you create a shopping cart, you get the checkbox option 'Team shopping cart'. You need to check the check box for that.
    You can define the team in your personalization tab.
    There is a very good wiki available on team shopping cart functionality launched in SRM 7 in SDN forum. You can refer the details for that.
    Thanks and regards,
    Ranjan

  • Link to other users' foto streams on Windows 7 PC

    Hi, I do not want to use iCloud for own foto streams but to connect to other users' foto streams on PC. Unfortunatley I did not find the way to connect. Does somebody know how to install/cutomize this feature?

    Hello MermaidMonkey,
    Here is an article about pointing iTunes to your library again.
    iTunes: How to open an alternate iTunes Library file or create a new one
    http://support.apple.com/kb/ht1589
    Here is also an article that describes a similar situation to what you are saying:
    No content shows up in iTunes after updating
    http://support.apple.com/kb/ts1967
    And lastly if needed, you can always re create your iTunes library.
    iTunes: How to re-create your iTunes library and playlists'
    http://support.apple.com/kb/ht1451
    All the best,
    Sterling

  • Connector for outlook - open other user's calendars

    Hello!
    Is it possible to save in outlook(with connector, R2) information about opened other users calendars?
    If I select from menu "File/Open/Other users"
    calendars are opened for current outlook session and not saved for the next outlook run.
    In Exchange this is normally done from Control Panel/...
    Is this function available in some different view or I must use macro recorder?
    Regards,
    Konstantin Kunshchikov.

    You can go in the System Preferences/Mail, Contacts & Calendars. There you can set up an Microsoft Exchange, gmail... account. It will appear in your Mail application after you set it up from there. You will also see them separately on the sidebar in mail.

Maybe you are looking for

  • Email no longer working

    Not sure i this is already posted but im no longer able to recieve emails through outlook no settings have changed but its rejecting my user and pass. have tried logging into my email through bt but it tells me to change the password due to "unusual

  • Benefits plans

    I have a scenario here and want help.. There are benefit plans which have been paid head of time by employees. like in Jan they paid for Feb, and so on.. The company now wants to make it paid to current month from 08/01/08. So they decided that in Ju

  • Outbound IDoc - Error 29 - Tcode CI33

    Hello, I'm trying to send IDoc to an external system. In BD64 the Distribution Model is configured and I also generated the partner profiles. In WE20 and WE21 everything's OK (ports defined to the LS). Logical systems also OK. RFC connection testd an

  • Please help - left hand menu/toolbar is missing??

    I need help.  My left hand menu is missing?? How do I get it back?  Ive tried pressing tab and F  but still nothing. 

  • Expanding all objects in  Connections navigator EA 3.03.97

    I'm experiencing this little but annoyiing bug. When creating a new database object package or table by running a script in the works-sheet and afterwards refreshing the node in the Connections navigator all the other nodes expands. regards Karsten