OWA error "The action could not be completed. Please try again".

Hi All,
We are facing some issues with OWA recently. When we try to search any thing from inbox/sent, we are getting above mentioned error.
We have Exchange 2010 with sp1. We observed 3 times that the Exchange Management Console was not turned up properly in the gap of 2 Months time. At that time we restarted the IIS in the Exchange server and the issue solved.
We have faced the same issue today. We restarted the IIS of Exchange server. Exchange Management Console is fine and the OWA access was also good. But we found the above mentioned error when try to search in inbox/sent.
We did following steps:
1) Ran Best Practice................ Didn't find any issues. Only Network drivers showing as very old.
2) Observed the Event Viewer. Found some errors relating to the Antivirus.
3) The Exchange Index and Search services are restarted. But no use.
Could any one suggest how to resolve this issue?
Thanks,
Ram.

Hi,
Firstly, I’d like to confirm if there is 9842 error in your event log and if search in Outlook works well.
If yes, you can check if the following article can help you:
http://terenceluk.blogspot.be/2013/01/searching-in-exchange-server-2010-owa.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

App Catalog ERROR "The action could not be completed. Try again later" Yellow exclamation mark

Hello, I have problem with access to App Catalog, when i try to access to App Catalog it's give error "The action could not be completed. Try again later" with yellow exclamation mark. I tried to make partial erase, I made full erase, I made Secure erase, but all these steps not helps.
I renew my firmware with latest webOSDoctor, but still nothing. Then I changed my Palm Profile, I create new one, but still NOT WORKING!
I checked all connections 3G and Wi-Fi, everything is ok, but App Catalog still not working.
So, I contacted with Palm Support, I told about this issue and I send them Quick Log and Log
with Description to [email protected]
Reference number for chat: Chat session ID number 89786521
Do you have any solution?
Best regards
Rufat Jalilov
Post relates to: Pre 2 p102una (Unlocked NA)

Honestly saying, the problem I had already a week, I tried to solve it on their own, but all my attempts were unsuccessful, I am sure that this problem is not related to what some of my actions, cause I never made any manipulations with phone.
I really appreciate the attention rendered by the support services, I just need that everything works fine.
I am sure that this is some sort of a strange problems, I have long been searching for an answer in the Internet came on similar way problems have other users.
I received today a update notice for App Catalog, I saw that HP Palm updated App Catalog, I updated my App Catalog, check again, but still nothing changed, same problem "The action could not be completed. Try again later" with yellow exclamation mark.
So, I will wait for a few days, will see what's happening.
Best regards
Rufat Jalilov

The action could not be completed. Try again later when try to update apps

Hi there,
Today I did run the update utility in my unblocked Palm Pixi Plus. I got the message that updates are available for most of the apps I have installed. When I hit on show updates, I can see the list of updates but after a few seconds I got the following message: The action could not be completed. Try again later.
My Palm webOS version is 1.4.5
Unfortunately, I just realized that online support chat was discontinued, it helped me a lot before.
I appreciate I find a fix in here.
Thank you in advance,
Luis.

Honestly saying, the problem I had already a week, I tried to solve it on their own, but all my attempts were unsuccessful, I am sure that this problem is not related to what some of my actions, cause I never made any manipulations with phone.
I really appreciate the attention rendered by the support services, I just need that everything works fine.
I am sure that this is some sort of a strange problems, I have long been searching for an answer in the Internet came on similar way problems have other users.
I received today a update notice for App Catalog, I saw that HP Palm updated App Catalog, I updated my App Catalog, check again, but still nothing changed, same problem "The action could not be completed. Try again later" with yellow exclamation mark.
So, I will wait for a few days, will see what's happening.
Best regards
Rufat Jalilov

I cannot install itunes no matter what I try, I have just purchased the iphone4 and I try to install the new itunes 10.5 but I keep receiving an error message saying that the installation could not be completed please try again.

I have deleted files/folders like it tells you too here, but nothing seems to work.
Can anyone help?
Thank you

right click on the setup file
run as administrator
also try compatibility mode as winxp sp3
also try rebooting windows.
if all fails still, run ccleaner, clean your pc of junk files, scan registry for errors and spyware while your at it.
can you install another app? meaning will it install anything else or is it just itunes that wont install?
are you logged in as an admin?

BUG: This action could not be completed. Try again later.

In trying to update the app, "Foursquare (Now)" via Preware, I am encountering the error, "This action could not be completed. Try again later." I previously had installed this app, which ran normally. I was updating the app with the newest version when I encountered this error. I uninstalled the app, then attempted to reinstall it, but it gave the same error (and now I do not have even the prior version running).
I have had no other difficulty installing homebrew apps and app store apps via Preware.
I'm on a Pre running WebOS 1.4, with 5.4 GB free.
A little help?

Hello thonght and welcome to the forums;
Each phone is associated with a specific country. The country is assigned automatically the first time a Palm profile is created on the phone. The App Catalog apps you can access are based on the country associated with the phone.
Phones associated with the following countries or regions can use App Catalog to purchase apps and to download free apps:
Canada; Germany; Ireland; Mexico; Spain; United Kingdom; United States
Phones associated with the following countries or regions can use App Catalog to download free apps only:
Australia; Austria; Belgium; China; Czech Republic; France; Hong Kong; Italy; Luxembourg; Netherlands; Norway; Poland; Switzerland
As Vietnam is not a currently supported country for the App Catalog, this is likely why you are unable to access any applications.
I apologize that this is not an answer that will correct the error you are seeing, however I hope this has been helpful.
TreoAide

When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

I downloaded the Microsoft Autoruns package and ran it. There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab. I also did the "netsh winsock reset" and rebooted. It didn't fix the problem. Any more ideas?

Streaming error the operation could not be completed

Dear All,
Please Help me i Above Subject Iam using Airtel Digital Tv Application name is pocket tv firts time is install Application is working good after some days showing error streaming error the operation could not be completed please try again later please let me know what is issued and how can fix this problem.

I've continued tests on different films, and tried my entire collection. I've found about two dozen that will play fine on the PC, but will not cooperate when streamed to either Apple TV or my iPad. I tried several more tests with the audio, and that turned out not to be a factor -- I could not replicate that on another test.
I wonder if something in the header of these files is corrupted or a flag is set incorrectly or something along those lines, as the data appears to be fine -- it's just not "handshaking" with my streaming hardware and/or the Apple Home Sharing code that powers it.
Is there any way for me to "scrub" these files and amend their headers, or get into the file and tinker with that info by hand?

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

File Save for Web = Error: The operation could not be completed.

Installed photoshop CS6 trial Version 13.0 on Windows 7 Ultimate running in hyper-v virtual machine. Created a small image and clicked File Save for Web. This produced the error dialog "Error: The operation could not be completed."
I tried the following trouble shooting steps:
1. deleted the preferences
2. created a new user
3. re-installed both the operating system and photoshop
4. looked for permission issues
5. monitored procmon.exe to look for unusual errors
I'm not sure what I'm looking for, but it simply does not work.

ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what.

Why do I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1).

In motion 5, when I go to export - H.264 - I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1). Why and How do I Fix It???

What version of FCPX ?

Save for web: Error: The Operation could not be completed

On Windows 7, under virtualbox on a linux host. All of the other discussions on this question relate to OS X.
I have reinstalled photoshop, and tried deleting preferences.

Save for web: Error: The Operation could not be completed
not much information there or in your append
supersoaker wrote:
On Windows 7, under virtualbox on a linux host. All of the other discussions on this question relate to OS X.
I have reinstalled photoshop, and tried deleting preferences.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM;
Windows reliability history Photoshop crash reports etc....
virtualbox on a linux host. does the virtual PC provide any useful information? There an error in your environment you need to find out what the error is.

An unexpected error occurred (4:190). Your firmware could not be updated, please try again.

hi
i get in my MacPro:
An unexpected error occurred (4:190). Your firmware could not be updated, please try again.
So which can i do ?
Im looking you to forward

What are you trying to apply ?
What Mac and what card are you trying to apply it to ?
What procedure are you following, and where do you get to when the error occurs ?

Error :The catalog selected is currently unavailable:Please try again later

Hi Experts,
I am getting an error "The catalog selected is currently unavailable:Please try again later" when select a sold to party. I am not getting this every time. Only sometimes i am getting this error. When i delete the temperorary files from internet explorer sometimes this error is not coming. What might be the reason for this error??
Thanks a lot in Advance.
Regards,
Lakshman.

Hi
Please let us know whether the error is thrown for all the sold to parties or for some.
This error is caused because the catalog cache is flushed out . A quick solution would be to replicate the product catalog from the CRM system to TREX system.

Contacts application error: The Operation could not be completed. No other information is available about the problem.

I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

Try the following..
Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
Download from Google and then decompress audio files..
Now test in Logic and see if you get the same issue....

Contacts error: The Operation could not be completed. No other information is available about the problem.

I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

Thanks! I looked at the Busycal post:
          To fix this, open System Preferences > Security & Privacy, select Contacts in the left sidebar, then check BusyCal.app.
On my system, only Skype, Parallels, and Contacts Cleaner are enabled to access contacts.
FYI, LinkedIn doesn't list any apps as having asked for, or been given access.
          If that doesn't work, here is a bigger hammer:
OK
          1) Launch Terminal in /Applications/Utilities.
          2) Paste the following text and hit return:
               tccutil reset AddressBook
First, I want to see what that does so I ran man tccutil
     NAME
          tccutil -- manage the privacy database
     SYNOPSIS
          tccutil command service
     DESCRIPTION
          The tccutil command manages the privacy database, which stores decisions the
          user has made about whether apps may access personal data.
          One command is current supported:
          reset    Reset all decisions for the specified service, causing apps to prompt
                   again the next time they access the service.
     EXAMPLES
          To reset all decisions about whether apps may access the address book:
                tccutil reset AddressBook
          3) Quit Terminal.
          4) Launch BusyCal, and click OK when asked whether to allow access to your contacts.
Now I see under System Preferences->Security&Privacy->Privacy->Contacts that all apps were removed from the list.
I haven't had BusyCal in years so I just launched Calendar and Contacts.
Unfortunately, as soon as I launch Contacts, I get the pop-up again about the LinkedIn

OWA error "The action could not be completed. Please try again".

Similar Messages

Maybe you are looking for