OWA still lands at Exchange 2010 for users migrated from Exchange 2010 to 2013

I never had any issues with OWA redirection for a few users that I migrated from Exchange 2010-2013 initially. For users that I am migrating in the past few days, the OWA 2013 is landing on Exchange 2010 despite the mailbox being successfully migrated to
Exchange 2013.
Troubleshooting:
1. I have restarted the IIS Services
2. I have restarted MSExchangeOWAAppPool.
3. I have also checked the homeMDB attribute of the 2013 migrated user with the Exchange 2013 database.
I would really appreciate if anyone could share their experiences on similar issues.

I have checked it, the migration status is completed. In regard to the namespaces, both CAS 2010 and 2013 are set to mail.domain.com; CAS 2013 is the internet facing. I have also checked the internal access for OWA, it's the same scenario. Migrating them
back to 2010 and 2013 won't resolve the issue in my case, because the issue persists for every new user that I am migrating.
I recently found the following when I login with a user who is not effected and then logout:
1. Login in back with the affected user without closing the browser or clearing the cache, it lands at CAS 2013 OWA.
2. However, I get the below listed error message when I logout. 
Your request couldn't be completed.
Click here to continue working.
This may have occurred for security reasons or because your session timed out.

Similar Messages

  • Calendar Free/Busy permissions being ignored for users migrated from Exchange 2003, fine for new users created on Exchange 2010

    I have uncovered a situation where it seems the free/busy permissions are being ignored for users that were migrated from Exchange 2003 to Exchange 2010.
    I have the default permissions set to only show Free/Busy Time, not Details.  However if I look at the calendar for a users who was migrated from the old Exchange 2003 server, I can see details.  If I look
    at a newer user who was added directly to the Exchange 2010 server, I (correctly) only see the times and "Free" or "Busy", not the specific details.
    I verified the permissions on the migrated mailboxes many different ways (Exfolders, cmdlets, etc) and all signs point to only allow showing Free/Busy Times, but alas, I can still see the Details as well.
    My users are using Outlook 2010.

    Hi,
    Does this issue occur on Outlook only or both Outlook and OWA?
    Since you have double checked the permissions via multiple methods, it seems there is nothing problem on permission. Please make sure the migration from Exchange 2003 server completed successfully.
    If in OWA everything goes well (cannot see details), it should be an issue on the Outlook client side.
    I suggest run Outlook under safe mode to avoid some AVs and add-ins.
    I suggest re-create profile to refresh the caches.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • OWA still redirects to Exchange 2007 (legacy) after mailbox-move to Exchange 2013

    Hi,
    I am in the process of implementing Exchange 2013 in coex with 2007. I am testing now in a copy of the production environment and have installed the Exchange 2007 SP3 RU11 prior to installing Exchange 2013 using the SP1 media.
    We use a wildcard certificate and I prepared the Exchange 2007 internal/external URLs for OWA/OAB/etc to use the legacy.domain.com names and in Exchange 2013 I set them all to email.domain.com. Exchange 2013 has Outlook Anywhere configured.
    All tests like autodiscover (internally via SCP) run fine and for a new Exchange 2013 mailbox the Outlook and OWA functionality is as expected. A mailbox still on 2007 also connects fine via Outlook and while connecting to OWA (using the htps://email.domain.com/owa
    url) also redirects me to https://legacy.domain.com/owa just fine.
    HOWEVER: after a successfull mailbox-move from 2007 to 2013 my OWA logon-request STILL get's redirected to the 2007 legacy URL. When I then logon again on the 2007 OWA I get the message that I should connect to the 2013 URL and end-up in a loop.
    Anyone any tips where to search?
    Many thanks in advance.
    Best regards and many thanks in advance, Eric Vegter

    This seems to be an outstanding issue.
    We just performed a fresh install of Exchange 2013 on a Windows Server 2012 R2 operating system. We're migrating from our existing Exchange 2007 server. At the moment we have everything properly setup in a co-existence state. All we lack is to complete the
    migration of our mailboxes from the 2007 DB to the 2013 DB.
    In performing the first mailbox move, to test the migration process and make certain mail flows as expected, we noticed this same problem. Before reading through this thread, I was able to assign Full Access to a delegate user and then perform the "Open
    Mailbox" feature from a 2013 user's account. This was successful in opening the mailbox within OWA 2013. However, I still could not access the account by simply logging into the Outlook Web App. It would login, then proxy back to OWA 2007 with the message,
    "Use the following link to open this mailbox with optimal performance:
    http://mail.domainname.com/"
    After reading about cycling the OWA app pool, I immediately tried it as a workaround and it worked. It is a little frustrating going about it in this way. Hoping to see more activity on this thread.
    -Lorne

  • User Migration from Parent Domain to Child Domain..The user is enabled with Exchange 2010 Mailbox in Parent Domain

    We currently have a single Windows 2008 R2 Active Directory domain controller, and an Exchange 2010 server. We are in the process of adding a child domain on a second Active Directory server for an offsite office location for a subdivision of our company.
    The two locations will be connected via VPN.
    Currently users exist on the root domain with Exchange accounts who will be moving to the new offsite company/location. We would like to be able to move these user accounts to the child domain while maintaining their existing Exchange mailboxes and
    email addresses. Is this possible, and if so how would we do it?

    Hi Srinivasa,
    According to your description, I think you have done all the preparation.
    For DL migration, the following article may give your some hints:
    How to Migrate Distribution Groups Across a Forest
    Good Luck!
    Niko Cheng
    TechNet Community Support

  • Proxy User (Migrating from edirectory)

    Hi Guys,
    I am sure this question has already come up somewhere in the past but i couldn't find it anywhere. all i am looking for is for someone to guide me to right direction on "Proxy Users for Active Directory". we are migrating from novell and we have
    number of
    proxy users with special/minimum rights to perform specific tasks. In this case all i want to create is a proxy user with the following rights:- 
    Enter/Object Rights - Browse
    CN - Read,Compare
    ObjectClass - Read,Compare
    Guys, any sort of help would be much appreciated. 
    Thanks in advance
    -mEtho

    Hi,
    I am not sure what do you want to achieve, the proxy users you mentioned, are they proxy objects in this article below?
    Understanding Proxy Authentication in AD LDS
    http://technet.microsoft.com/en-us/magazine/2008.12.proxy.aspx
    Best Regards,
    Amy Wang

  • How much effort for object migration from CPS Basic to Full version?

    Dear all,
    I've got 2 questions concerning using SAP CPS Basic version first and migrating later to full version, looking for answer(s):
    1. Is it possible to start using the free CPS and then with some tool migrate from many isolation group as to one global ?
    2. Is there any limitation in the number of isolation groups in the free version ?
    If someone have experience, would be great to get feedback.
    Look forward reading from you.
    Best Regards
    Ferry

    Hello,
    1) the product comes with a job to 'De-Isolate' the system when you install a full license. Note that you can only deisolate, it is not possible to go back from full to free.
    2) there is no limitation.
    Regards Gerben

  • I still can't erase an incorrect user name from the password file.

    I have been using a web site for a long time. Suddenly the user name that is supposed to be stored in my "password/user name" file is not working. I totally deleted the web site from that folder. When I go to log in, it still automatically comes up with an incorrect user name.
    Example:
    The correct user name is "[email protected]", but Firefox is coming up with "ab%49gmail.com"
    All of this even though when I went to the Security tab and have deleted the web site from the file, completely, Firefox still brings up the wrong user name when I go to log in.

    Use these steps to remove saved (form) data from a drop-down list:
    #click the (empty) input field on the web page to open the drop-down list
    #highlight an entry in the drop-down list with the mouse or cursor Down key<br>do not click the mouse or press the Enter key
    #press the Delete key (on Mac: Shift+Delete) to delete the highlighted entry

  • User migration from Lync 2010 to Lync 2013

    We have Lync 2013 pool co-existence with Lync 2010 pool. Need to move users based on their AD Group membership. In a particular AD group, only few of the users are enabled for LYNC 2010, not all users. How to get the list of only Lync enabled users in AD
    group and move them on to Lync 2013 by PowerShell script?
    Thanks in advance for your help
    Tek-Nerd

    When I ran the below command
    Get-ADGroupMember Mygroup | where {$_.msRTCSIP-UserEnabled -eq "true"}
    on my Lync 2013 server, got the below error message...
    At line:1 char:46
    + Get-ADGroupMember MyGroup | where {$_.msRTCSIP-UserEnabled -eq "true"}
    +                                             
    ~~~~~~~~~~~~
    Unexpected token '-UserEnabled' in expression or statement.
    At line:1 char:59
    + Get-ADGroupMember MyGroup | where {$_.msRTCSIP-UserEnabled -eq "true"}
    +                                                          
    ~~~
    Unexpected token '-eq' in expression or statement.
        + CategoryInfo          : ParserError: (:) [], ParentContainsErrorRecordExcep
        + FullyQualifiedErrorId : UnexpectedToken
    Tek-Nerd

  • Lync 2013 client is deployed but user accounts are not migrated from OCS to Lync 2013 Server - how to open Lync meetings automatically in the Lync Web Plug-in

    We have in our enterprise the following scenario:
    1 - Lync 2013 client is installed
    2 - User accounts are not migrated to Lync 2013 Server, users are using Office Communicator as their main tool
    3 - Users receive Lync 2013 meeting requests but when try to access them, Lync 2013 client launches and shows error. Users will need to open the browser and paste the URL to the address bar but this still open
    4 - We cannot use the workaround of adding "?SL=1" to the Lync 2013 meeting URL as the user base is large and manual workaround is not accepted
    5 - Question: is there any automated way, via egistry key or GPO setting, so that users temporarily (until their accounts are migrated to Lync 2013 server) can bypass Lync 2013 client completely and automatically open all Lync 2013 meetings
    on the browser, using Lync Web Plug-in?

    Thanks for the response,
    First, I should have mentioned clearly that users have Office Communicator 2007 client and Lync 2013 client installed in their machines. Their accounts are not migrated yet to Lync 2013 server.
    Second, we are using IE9 and IE10. The issue is that users CAN join Lync 2013 meetings with their browsers but have to paste the URL manually to browser and add "?SL=1" otherwise, if they just click at the "Join Online Meeting" or "Join
    Lync Meeting" URL it launches Lync 2013 client which shows error because is not configured yet, as they are using OCS client and migrating slowly to Lync 2013 server.
    Is there a Group Policy setting or a registry key from Microsoft that can be turned on to these users machines and make will all Lync meeting requests to be opened in IE browser instead of Lync 2013 client. We need a way to ignore
    Lync 2013 client until user accounts are migrated to Lync 2013 Server. Manually typing URLs is not an option in a big organization, can't explain thousands of users of different levels what to do.
    We are regretting the decision not to separate Lync 2013 from Office 2013 package we deployed recently. If Lync 2013 is uninstalled then all Lync meeting requests are opened in browser without an issue.

  • User migration from 11i to OID

    Hi all,
    current:
    on AIX
    11i with 10g db (multi node)
    orn1: CARD
    orn2: forms + Apache
    installed (on host orn2 on a seperate mount point) 10g AS sso/oid, portal is also configured with e-business ...
    req:
    needs to Existing Application Accounts in Oracle E-Business Suite Release 11i to Oracle Internet Directory.
    gone through with MOS: 261914.1, page 71
    Exported Application Accounts into Intermediate LDIF File. DONE
    Converted Intermediate LDIF File to Final LDIF File. DONE
    stuck while Loading Final LDIF file into Oracle Internet Directory:
    the command suppose to be :
    $ORACLE_HOME/bin/oidprovtool operation=disable \
    ldap_host=orn2.xyz.com \
    ldap_port=389 \
    ldap_user_dn=cn=orcladmin\
    ldap_user_password=welcome01 \
    application_dn=”orclApplicationCommonName=orn1,cn=EBusiness,cn=Products,cn=OracleContext,dc=us,dc=xyz,dc=com” \
    profile_mode=BOTHUnable to get GUID of entry: orclApplicationCommonName=orn1,
    cn=EBusiness,cn=Products,cn=OracleContext,dc=oracle,dc=com
    javax.naming.NameNotFoundException: [LDAP: error code 32 - No Such Object]; remaining name 'orclApplicationCommonName=orn1,
    cn=EBusiness,cn=Products,cn=OracleContext,dc=oracle,dc=com'
    Unable to locate application..
    I know ldap host, port but confusion with "orclApplicationCommonName" parameter what do I need to pass here ????
    I got this SQL to get "orclApplicationComminName", ran it on 11i db side by apps user but got "no rows"
    select fnd_preference.get('#INTERNAL', 'LDAP_SYNCH','USERNAME') Apps_Instance_OID_Account from dual;
    please help me out to gone through ....
    Thanks in ADV !!!!!
    Edited by: user9141007 on 18 Jan, 2012 11:45 PM
    Edited by: user9141007 on 18 Jan, 2012 11:46 PM

    Hi Helios,
    Thanks for the reply....
    I tryied to get output from MOS 437697.1, ran it on e-business by apps user......... but out is "no rows selected"
    select fnd_preference.get('#INTERNAL', 'LDAP_SYNCH','USERNAME') Apps_Instance_OID_Account from dual;
    select fnd_preference.eget('#INTERNAL', 'LDAP_SYNCH','EPWD','LDAP_PWD') Apps_Password from dual;

  • Users migration from ifs 9.0.1 to ifs 9.0.2

    I have 2 installations of ifs:
    1) IFS 9.0.1.0.0 on Linux RH 7.1 (iAS) and Solaris (db)
    2) IFS 9.0.2.0.0 on Linux RH Advanced Server 2.1 (Infrastructure and iAS on the same machine)
    On installation 1 I've some 50 users, which I want to migrate on installation 2. I tried with ifsexportusers/ifsimportusers (and ifsexportcontent/ifsimportcontent), but when I tried to reimport on installation 2 the ExportSet created with installation 1, I received:
    IFS-47003: ClassObject (ACCESSCONTROLLIST) has a different number of attributes on import system than in ExportSet. Correct and try again.
    With ifsmgr I can see that ACLs in 9.0.2 have an attribute which is not present in 9.0.1 ACLs: COMPONENTACLS (datatype: PUBLICOBJECT_ARRAY): I think therefore that I cannot resolve this problem if I don't change the attributes in 9.0.1 (add), or in 9.0.2 (delete), but I think this is a bit unsafe...
    Do you Know another easy and fast way to migrate users? (Yes, I can recreate users and copy their documents manually, but this is a very slow and error prone way).
    Thanks, bye.
    Angelo

    Angelo,
    You shouldn't eb using the ifs export/import for migration we don't support using export/import on diffrent versions. Did you check the installation guide it explains how to upgrade from 901 to 902.
    http://technet.oracle.com/docs/products/ifs/doc_library/Sol_iFS902_RTM/Disk1/doc/Installation%20Guide/unix/html/preinsta.htm#1057046
    Hanne.

  • User settings migrated from Office 2007 to 2013 using OCT

    Does anyone know what user settings are retained after upgrading Office 2007 to 2013 using the OCT? I have set the checkbox to migrate user settings in the OCT but all of the user's pinned documents are not longer there after the upgrade. Is this normal?

    Microsoft doesn't support migrating directly from SharePoint 2007 to SharePoint 2013, likely part of your decision to use a third party tool.
    I'm not familiar with these error messages, I suspect they're from DocAve and not SharePoint.
    My suggestion is to contact AvePoint support. 
    Jason Warren
    @jaspnwarren
    jasonwarren.ca
    habaneroconsulting.com/Insights

  • Module for data migration from pdf(zip) to pdf(unzip)

    Hi all,
    I am Working on Data migration using SAP XI with out using IR.
    I want to Zip the pdf file in the Sender CC and unzip the same in Receiver CC.
    I am using PAYLOADZIPBEAN to zip the pdf.
    Did any one work on zipping and unzipping the PDF files?
    Kindly let me know the Module I need to use for the same.
    Thanks,
    Sree

    Hi Sree,
    Please go through this blog and follow the step by step procedure for configuring your scenario.
    /people/stefan.grube/blog/2007/02/20/working-with-the-payloadzipbean-module-of-the-xi-adapter-framework
    Its a nice blog and i have configured my scenario using the same already.
    Thanks and Regards,
    Sanjeev.

  • Can't create DTP for cube migrated from business content to 2004s

    I am in the process of converting 3.5 Business Content InfoProviders to the new model for 2004s.
    Master data was not a problem, but I’m having a hard time getting InfoCubes to migrate.
    I installed 0PUR_C03 from Business Content and replicated the DataSource into the Data Warehouse.
    I right-clicked 2LIS_02_S013, selected Additional Functions, then chose “Transformation erzeugen” (a.k.a. Create Transformation in English).
    The transformation is generated with no errors and it was activated.  The DataSource is migrated automatically in the process.
    Then, I went to add the Data Transfer Process and that is where I got stuck.
    I right-clicked the cube and took Create DTP.  For source type, I selected datasource.  A dialog box then shows the objects associated with the cube, including the converted infosource, but nothing is highlighted for me to choose from, and I can’t complete the process of creating the DTP.
    Can anyone tell me where I might have gone wrong?

    u got it...
    Message was edited by:
            Raman
    Message was edited by:
            Raman

  • Best practice for client migration from SMS 2003 to SCCM 2012 R2?

    Can anyone advise what the most recommended method is for migrating SMS 2003 clients (Windows 7) to SCCM 2012 R2?
    Options are:
    1. SMS package to deploy ccmclean.exe to uninstall SMS 2003 client. Deploy SCCM 2012 R2 client via SCCM console push.
    2. Simply push SCCM client from console installing over existing SMS 2003 client.
    I am finding some folks saying this is ok to do but others saying no it is not supported by Microsoft. Even if it appears to work I do not want to do it if it is not supported by Microsoft. Can anyone provide a definitive answer?
    3. Use a logon script or Group Policy preference to detect the SMS client and delete it using CCMclean and then install the SCCM client.
    Appreciate any feedback. Thank you.

    Hi,
    >>I am finding some folks saying this is ok to do but others saying no it is not supported by Microsoft. Even if it appears to work I do not want to do it if it is not supported by Microsoft. Can anyone provide a definitive answer?
    I haven't seen any official document records the option 2 method. There is only upgrading from SCCM 2007 to SCCM 2012 directly.
    I think you could use a logon script or Group Policy preference to detect the SMS client and delete it using CCMclean.exe. Then use SCCM 2012 to discover these computers and push clients to them.
    Best Regards,
    Joyce

Maybe you are looking for

  • I forgot my iphone 5 passcode, how do i get on?

    I changed my iphone password and now i cant remember it and im locked out. how do i get on without having to reset  my entire phone?

  • How to use 3G in the new ipad

    How can i use a 3G network in the new ipad.. I tried putting my micro sim on it but the new ipad don't detect the carier

  • How to publish non-Crystal Report files in BO XI R2?

    Development Environment:  Visual Studio 2005, C# I'm working on a project where I need to publish non-Crystal Report files - specifically Excel and Text files - to a specified folder in BusinessObjects XI R2.  However, I'm having a very hard time fin

  • HELP ME! Embedding Graphics in Reports.

    I am trying to embed an Oracle Graph (from Graphics) in a report, but when I try to run the report I get a REP-0075 error followed by an OG-01603 "Unable to create PL/SQL Development Environment Context" Error. Then when I click OK, I get another err

  • Tips for manual migration from iBook G4 to MacBook

    I have tried to use the migration wizard 4 times and it always gets stuck from my iBook G4 to my new MacBook.. I have reformatted my MacBook and will do the migration via and external Hard Drive manually. The documents are easy. Photos and Itunes is