'owa_util.get_cgi_env does not return non-standard headers

'owa_util.get_cgi_env does not return non-standard headers in embedded PL/SQL gateway even when the DAD attribute "cgi-environment-list" is set to pass
such headers.
Is this information correct?

Hi,
I came across the same problem today, my current understanding of the problem confirms your suspects, but I am still investigating the matter.
If you made some progress on this, please share your thoughts.
Flavio
http://oraclequirks.blogspot.com
http://www.yocoya.com

Similar Messages

Content scope document library does not return result for non farm administrator

Hi
I have a situation where I had to go with a unique permission applied subsite to store 1000 documents in the document library. This site has a set of 50 users. I was able to create content scope and library path for search. It returns results for me(creator/owner/administrator)
however if I add other users as contributor or full permission, even after full crawling it does not return result for others.
I saw some article that security broken site wont be indexed normal way and to include and I did that as well but no result for other users. I always get result.
Please suggest if there are any specific security permissions that I need to include, so the document library target search will return result for others.
Thanks
Shri

Hi Shri,
For administrator search results, it looks like the documents could be crawled and searched.
For other users you grant full control permission on subsite with unique permission where you store 1000 dcouments in document library, please make sure these 50 users have access permission(at least view permission) on documents from the
library, then test again.
Also test if users search on search center site without search scope, see if it's scope issue or search web part issue.
If above doesn't work, please check ULS log for related useful information around the time when users search the documents, there should be more info to verify if issue is related to unique permision.
Thanks,
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

My PC does not return to the source document I print from

I had a setting control for
this in XP but can't find the page I got it from.<o:p></o:p>
<o:p> </o:p>
In ANY application or browser
this happens. I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from. This is maddening and causes all kinds of issues.
Searching the web for this now produces nothing and I know I can't be the
only person who experiences this.<o:p></o:p>
<o:p> </o:p>
This is a Windows 7 platform
in a networked business environment. I'm running the Classic Menu add-in
from Addintools because I can't stand the ribbon and have never liked it.
In Windows 7, I'm running a couple of other add-ins that restore the XP
use of the task bar properly so one can work efficiently.<o:p></o:p>
<o:p> </o:p>
None of the add-ins are what
is causing this issue because I'd run the same Classic Menu add-in on the XP
box and it had the same issue until I found the work-around that I can't
remember now.<o:p></o:p>
<o:p> </o:p>
Has anyone else experienced
this issue?<o:p></o:p>
<o:p> </o:p>
Jeff Lynch<o:p></o:p>

Hi,
"I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from."
If I'm not misunderstanding, do you mean that the workbook is automatically closed after you print from that workbook, right?
As I know, if we use the default ribbon in Excel, no matter in Windows XP or Windows 7, the opened workbook should be stay opened after you print from that Excel workbook.
So the question is that: what is the version of office? What is the Classic Menu add-in you're running now? Did you manually download and install it to your system? Could you please share a picture with us about the add-ins you're using?
Yolanda Zhu
TechNet Community Support

Only VBA does not recognize non-English characters

Hello guys,
I have a new laptop with Windows 8.1 bought in the USA and I'm having a difficulties with Excel VBA (Office 365 University-64x bought in the Czech Republic - Central Europe). The VBA does not recognize non-English characters (particularly "ř" and
"ů") which causes me problem when running some codes that I wrote earlier on my previous laptop (Windows 7, bought in the Czech Republic with the same Office).
The problem with non-English characters has occurred only in VBA so far, otherwise I can use these characters normally in Excel cells, Word... I tried to install both English and Czech version of the Office with no change, I also installed Czech proofreading
tools and set everything to Czech in the Office. The location and language preferences in the Windows are also set up to Czech. And it is not a problem of a font. I also mentioned that when I tried to look up these characters, using Ctrl+F, it changes
original ř to r after a search and again this is only an issue of the VBA.
Thank you very much for any help.
Tom

Hi Tom,
VBA for Excel can only recognize ASCII code from 0 to 255, if you use other special characters like "ř" or "ů", it will returns 63(?) to you. To use this kind of characters, you have to utilize ChrW function to parse a decemal to the
character.
http://msdn.microsoft.com/en-us/library/ee177465.aspx
for example, the hex code and dec code for these two characters are as below:
Hex   Dec
ř 159   345
ů 016F 367
So to get these two characters in VBA, you could code as below:
ChrW(&H159) or ChrW(345)
ChrW(&H16F) or ChrW(367)
You can get the hex code of the character by searching in the system character map(in the Win8.1 start view, search "character map"), then convert the hex code to decimal code by yourself.
Range("A1").Value = ChrW(&H159) & ChrW(&H16F)
Range("A1").Value = ChrW(345) & ChrW(367)
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

OCIStmtExecute does not return immediately when client is busy.

Hi.
I'm testing a very busy multi-threaded client server that consistently generates
a large number of simple queries through oci. The problem is that, when the
server(client) is busy, OCIStmtExecute does not return immediately in
non-blocking mode.
Of course I have set non-blocking mode and OCIStmtExecute does return
OCI_STILL_EXECUTING immediately when the server is not busy. But
when log rotation occurs which concatenates a large text file (~500MB)
onto an even larger text file (up to several giga bytes), or when I simply copies
or concatenates large text files manually, OCIStmtExecute returns very slowly.
(roughly about after 100~200ms)
However, while log rotation takes place, everything else including other oci
calls that come before OCIStmtExecute (prepare, define) return fast. So
for me it really seems that only OCIStmtExecute becomes extremely slower
when local server (especially the disk) is busy.
Is there any way to let OCIStmtExecute immediately return all the time?
Thanks in advance.

Yes, I knew that OCIStmtExecute would be the only function that causes such
delay and that was why I traced that call. And so far, I checked several times
what happens at the exact moment on the server but everything was ok.
Actually OCIStmtExecute becomes slower exactly when crontab-ed log rotate
occurs so I think this delay must be a client-side problem for now.
This server is quite busy and has to respond fast, so it is important to
guarantee fast response time while a small number of timeout losses are tolerable.
But as OCIStmtExecutes' first OCI_STILL_EXECUTING return takes hundreds of
ms it has become more like a blocking call and currently I cannot find any way to do what I want.
So now everytime such thing happens, the thread waits
quite long, after the first OCI_STILL_EXECUTING return
the time difference exceeds timeout limit, and the thread
calls OCIBreak() and OCIReset() and returns.

VOD Sound drop at commercials and does not return when TV show resumes

i've noticed that there are other customers experiencing this problem and I have not seen any response from COmast support.When playing a TV-Show from On-Demand, the sound drops when a commerical starts and does not return when the TV Show resumes.A reenct example: Walking Dead 515.Yes, I have called comcast support to report it.Of course they wanted me to go through the standard drill - Power Off/On; Refresh Signal; etc. with no result...The problem occurs on series, e.g. - Walking Dead 515; Grey's Anatomy; It happens after the episode has been in the On Demand listing for about a week.It seems that the sponsors are no longer paying for the commercial, so the sound drops when the commercial comes on.However, the sound does not come back when the commercials end and the show comes back on.Stopping playback and starting at that point returns the sound, but, - oftentimes, the counter doesn't advance correctly in the Recently Viewed listing, so you end up starting back to the last time you stopped it. This is clearly a bug on the back-end, and I don't expect it to be fixed until enough people complain and Comcast Support replicates the problem observes it for themselves.

I have this EXACT problem on Anthony Bourdain's show Parts Unknown and the Last Ship. As soon as it hits the advertizement sound drops and continues as dropped. Pausing and restarting the program completely after exit regains sound but as soon as it hits another commercial it goes out again. The counter problem makes this option only good for a few times. Then it resets back.

RoadMap does not return the selected step on ESS 600 Record Time entry

RoadMap does not return the selected step on Record Time entry application in ESS. Is it suppose to behave similar way or is it suppose to take user to the selected step. If yes , then is there a setting or customization that i have to take care of, as its a standard SAP delivered ESS Record working time application.
Please let me know. I appreciate your help in advance.

Check with administrator in the src configuration thing,
Cheers,
Apparao

WebI does not return failed when scheduling a report which only holds parti

WebI does not return failed when scheduling a report which only holds partial results.
We have scheduled reports which take some time to run. When they are scheduled they sometimes show successful even though the report only holds partial results. The only indication is when you open the report as webi report you see the warning that it holds partial results.
When running the report manually, it works file.
The issue is not in the no of rows in the universe settings because we this unselected. The issue is that it times out.
The reason that it times out is that a lot of resources are used for loading and processing data when the report is scheduled. When running it manually, it works because at this time the serverload is less. the time in the universe is set to 10 min.
The version we have is BOXIR2-SP4.
Ok. Issue identified.
The question is - why is the report successful when it holds partial results? If this is normal behavior, noone can really trust the scheduled reports, especially when you save it to excel and send it by mail.
Is there a solution for this except increasing the allowed query time which would not solve the issu but only allow more reports to complete?
Edited by: Karlgren Michael on Sep 17, 2009 1:22 PM

Hi ,
Currently this problem exists in XI R2. This feature will be part of thenext Service Pack i.e XI R2 SP6.
This CER will be delivered from IDC Webi and BIP Platform as part of Jupiter Sp6.
Problem Statement:
Scheduled WebI Reports which are partially refreshed are distributed to the destinations for Users to View and make decisions. These users arenu2019t usually aware that these reports have u201CPARTIAL RESULTSu201D
Recomended Solution:
Allow the Schedule Creator / Modifier to set a parameter to stop the distribution of the u201CPARTIALLY REFRESHEDu201D WebI report.
Thanks
Salini

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

VBA does not recognize non-English characters

Hello guys,
I have a new laptop with Windows 8.1 bought in the USA and I'm having a difficulties with Excel VBA (Office 365 University-64x bought in the Czech Republic - Central Europe). The VBA does not recognize non-English characters (particularly "ř" and
"ů") which causes me problem when running some codes that I wrote earlier on my previous laptop (Windows 7, bought in the Czech Republic with the same Office).
The problem with non-English characters has occurred only in VBA so far, otherwise I can use these characters normally in Excel cells, Word... I tried to install both English and Czech version of the Office with no change, I also installed Czech proofreading
tools and set everything to Czech in the Office. The location and language preferences in the Windows are also set up to Czech. And it is not a problem of a font. I also mentioned that when I tried to look up these characters, using Ctrl+F, it changes
original ř to r after a search and again this is only an issue of the VBA.
Thank you very much for any help.
Tom

Hi Tom,
I would suggest you post the question in the forum of
Excel for Developers as your query is directly related to VBA. Here we mainly support Office client side issues:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

FM HRTRV_IF_GET_TRIP does not return USERDATA

Hi, it's me, yet again...
I'm using the FM "HRTRV_IF_GET_TRIP" in FITE_VC_GENERA_DATA in a post exit of comp-controller method "ON_SHOW" to get the structure/Table USER/PTK99 from the TE Cluster for binding to the context afterwards. At least that's the plan. The FM does not return me the data I expect in parameter USERDATA, although there is data in the TE Cluster and within the FM, I can see the global Table USER being filled whilst the macro RP-IMP-C1-TE. But this data is not further process neither is seems the strucutre USERDATA to be touched at any point of the FM. Am I calling the FM 'wrong' in any way? I'm close to making an implicit enhancement at the end and forcefully fill userdata from user....
Too long, didn't read: USERDATA is not returned filled --> WHY?
CALL FUNCTION 'HRTRV_IF_GET_TRIP'
EXPORTING
    employeenumber             = wd_assist->GS_COMMON_RFC_INPUT-employee_number
    tripnumber                 = lv_tripno
*   LANGUAGE                   = SY-LANGU
*   CALCULATE_AMOUNTS          = 'X'
*   GET_TRIP_FROM_MEMORY       = ' '
IMPORTING
*   FRAMEDATA                  =
*   STATUS                     =
    USERDATA                   = ls_user " should contain cluster values, but it doesn't
tables
*   RECEIPTS                   =
*   ADDINFO                    =
*   GUESTS                     =
*   TEXT                       =
*   MILEAGE                    =
*   STOPOVER                   =
*   DEDUCTIONS                 =
*   COSTDIST_TRIP              =
*   COSTDIST_STOP              =
*   COSTDIST_RECE              =
*   COSTDIST_MILE              =
*   AMOUNTS                    =
*   ADVANCES                   =
    return                     = lt_bapiret " says method was executed successful
In the insides of the FM:
* IF CALCULATE_AMOUNTS <> 'X'. "XJY
* import the trip because it was NOT imported before
READ TABLE T_PERIO INDEX 1.
TE-KEY-PERNR = T_PERIO-PERNR.
TE-KEY-REINR = T_PERIO-REINR.
TE-KEY-PERIO = T_PERIO-PERIO.
TE-KEY-PDVRS = T_PERIO-PDVRS. " Once this line is executed, the global table USER is fileld with the data I expect
RP-IMP-C1-TE.
* ENDIF. "XJY
if t_perio-abrec = '0' or
     t_perio-abrec = '1'.
    clear te-key-pdvrs.
    import beler from memory id te-key.
endif.
I hope somebody has ever used this one and can tell me what I'm doing wrong...
Cheers, Lukas

good to know. that you have already implemented similar thing. In our case if employee want to pick a manager he will only be given option from a custom table entries.
They way i was thinking was that there will be a checkbox that will say "Override Approver"
and when that will be checked text filed will be enabled with search help restricted to custom table entries.
I have one question. When I am enhancing FITE_VC_REVIEW and adding field in that view, I m finding it hard to track it. Looks like adding to General data screen will be much easier.
R u using ABAP memory to track field and use it at SMOD or you are using SAP memory ?
I am just starting on this one and not expert at webdynpros.. will ping you if i need any more help
and yes i just added following like in FM HRTRV_IF_GET_TRIP
read TABLE user INTO userdata INDEX 1
to get it to load userdata..

Search does not return my documents

Hi Gurus,
I have created few documents using CM SDK. I could able to see these documents using IFS browser.
Now I wrote content search method to search document content.When I search for "cmsdk" string it returns 13 documents.But when I search for a string in the document, I created , for example a text like "struts" it does not return any result , though this document I can see in IFS browser.What could be the reason?.
BTW I didn't create any FORMAT type while I am storing the document. Can any one point me to a document where I can find some instructions on "must and should things to do before search".
I am using CM SDK 9.0.3.
Thanks in advance.
Giri.

have you set the indexing on?

My Mini Ipad Does not return to the Home screen after I press the Home button

My Mini Ipad Does not return to the Home screen after I press the Home button. I have also tried to turn it off and it is not responding.

Check the following:
1. Check credit card number
2. Check security code
3. Billing Address must be the same as credit card
4. Check expiry date
5. Make sure you have sufficient fund

Iphone 5 Does not return to the Home screen after you press the Home button, Iphone 5 Does not return to the Home screen after you press the Home button

Does not return to the Home screen after you press the Home button

The buttons do wear out, and when they do you'd need to get the phone serviced.

IWEB previous does not return to previous page

I am trying to get back to the last page with the Previous option in the Link setup. I do not know why it does not return to the previous page but some other pages.

The following script is courtesy of Cyclosaurus. Use it in an HTML snippet:
<button type='button' target='_parent' onclick='javascript:history.back();' > Previous Page </button>
OT

'owa_util.get_cgi_env does not return non-standard headers

Similar Messages

Maybe you are looking for