OWB 10.1 -- How to make a JOB agains a process flow.

Dear All
I have created mapping and make a process flow. Deploy and generation done successfully.
If i execute my process flow it whole bring data from source table to detination warehouse schema table.
I want this process automate and run it daily at a given time. I do not get any control centre or other utility from OWB wheren I can make a job or schedule to achieve this goal. My OWB version is 10.1.
Regards
Sayeed

Follow the below step to schedule mapping
1.Define the Scheduler
2. Right Click on Schedule tab -> New and define the module say Sche_mod
3.Right Clicvk on Sche_mod ->New
Filll all the details like when to run ther schedule say every sunday
2.Right click the mapping or process flow which ever to schedule
under Configure > Refered Calendar select the schedular name.
3 Deloy the mapping .
4.Deploy the Sechdular then run the scheduler.
then every sunday the mapping/process flow will be executed.
(Mark the answer as helpful or correct if it is)
Cheers
Nawneet

Similar Messages

How to make a job run on a appointed node

I have a problem. The database is Oracle 10g, RAC, two nodes
There are some job which run on everyday night. Now, something happened, the job run on Node A can't work as normal, but if run on node B, It will work well.
so I just want to submit the jobs on Node B, I submited the jobs on Node B, but the jobs always run on Node A.
I want to know how to make a job run on a appointed node.

the Job just transfer some procedure to add partitions for some table, to merge the records from some tables to one table and so on.
the problem is when the job run on Node A, it is very very slow, the procedure would run hours and not success end, but if on Node B it will successfully end in seconds.
restart the Node A would be a way for the problem, but may it will leave a hidden trouble. I want save the scene to find out the problem
so can you help me

How to make scheduled jobs Fail if the return partial results?

How to make scheduled jobs Fail if the return partial results?
Does anyone know if there is a way to do this?
We have a number of reports that we schedule to various locations in Excel and PDF. We are frequently getting problems which are manifesting themselves as empty data providers and if we run them as Web Intelligence reports it says Partial Results. Re running the reports normally fixes the problem and returns the data correctly but the problem is that the scheduler reports them as successful and the emails or files get distributed (causing our customers to complain!!!).
Currently using XIr2 +SAP integration Kit migrating to XI 3.1 in July 2009
Any ideas/suggestion would be appreciated...
I did find reference to the adapt case ADAPT01122128 which may help but when and if are unkowns so not much help.
Ta
Nick

This may be helpful to some people:
http://blogs.sun.com/milan/entry/using_web_service_to_send

How to make reason code compulsory while processing F-53

Hi Boss,
Can u plz. tell me How to make reason code compulsory while processing F-53. this is because I have defined differnet reason code and one is having blank text.
Thanks
S

hi,
Just check this one dont check previous one....
goto TCODE OBC4 and then click on ur company FELD status variant and double click on field status group ....
Then click on G067 RECONCILTION ACCOUNTS and then double clickn that in that and then click on payment transactions and then select REASON CODE AS REQUIRED.
ur problem will solve...
if useful assign points
regards,
santosh kumar

How to make a program for backgroung processing used servlet

how to make a program for backgroung processing used servlet

well i need the coding part written in servlet ,in which servlet is always ready for accepting a client request.

Ipod Classic 120g - How to make it work again? Was formatted by windows.

My ipod classic shows as "removable device" in the finder, but does not appear on itunes. The iPod was formatted as a mobile device on windows. How to make it work again?

Hello soraiaSP
Try putting your iPod classic into Disk Mode and then use iTunes to restore it. Then it should show up within iTunes to sync media across to it.
Putting iPod into Disk Mode
http://support.apple.com/kb/ht1363
Regards,
-Norm G.

TS1559 I stop receiving I message in my iPad recently I changed my apple password how can make it work again?

I stop receiving I message in my iPad recently I changed my apple password how can make it work again?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

I accidently "hide" some of my purchased apps in the app store and need to know how to make them visible again.

I accidently "hide" some of my purchased apps in the app store and need to know how to make them visible again.

Mac App Store- Hiding and unhiding purchases

How can I pass parameters from one process flow to another process flow?

How can I pass parameters from one process flow to another process flow (sub process) in warehouse builder? let me know the steps I have to do in warehouse builder.
Thanks in advance,
Kishan

Hi Kishan,
Please post this question to the Warehouse Builder forum:
Warehouse Builder
Thanks, Mark

How to make Viewer default (again)?

I upgraded Adobe Reader and every time it opens it asks me doe I want it to be my default viewer for PDFs. I always clicked NO but just recently clicked YES by mistake. Now it opens every time to see PDFs.
I don't really like it, liked Apple Viewer better. How can I make it default again?
Thank you,
Zack

I have nearly the same issue: Acrobat always asks if I want it to be my default viewer. After many dozens of times saying "no," I finally accidentally clicked "yes." (It also has a checkbox called "Don't sk this again," but it still asks every time).
Anyway, I also want to use Preview as the default, and I can use the Get Info trick, but there's a rub: Before Acrobat did this, there were certain pdf files that I wanted opened in Acrobat, and not Preview. They had the Acrobat icon, not the preview one. If I do the Get Info trick, I have a feeling that they will be changed to open in Preview instead of Acrobat. So my questions are
1) Will this actually happen?
2) Where is the info stored that makes it possible for some pdfs to be opened with one app and other pdfs to be opened with another app?
3) When I accidentally let Acrobat change the default, is this identical to having chosen Get Info on a pdf file and selecting "Change All..." to Acrobat, or is it just changing some system-wide preference about which viewer should be the default—a preference that, I hope, can be changed back.

My final cut pro 6, is missing some files. because of mac keeper. I think its atom strand.HD. what to do, and how to make it work again?????

I got mac keeper to clean up some files, and now I cant open Final cut pro 6. because of missing files. it is loading, at Atom strand.HD file, before it says that the program suddenly shutted down. the atom strand.HD is a file, that is connected to motion. if I put motion in the garbage can, then final cut works, but if I take motion out of the garbage can again, then it doesn`t. arrrrr. shall I re install final cut or motion. or is there a better way to make it work, again????? !!!!

Well, best bet would be to reinstall FCP. I'd use the FCS REMOVER from digitalrebellion.com (free) to uninstall the app first, then reinstall from the DVD.

How to add a procedure to a process flow, but PF continue immediately

Hi all,
In my process flow I would like to be able to launch a procedure. However I want the process flow to continue immediately regardless of the state of the procedure. I want the procedure to be called, and I want the process flow to be able to continue its steps regardless of the state of the procedure. Is there a proper / best way to do this?
The following method seems to work. But I am not sure if it is the proper / best way to do it:
Start --> Fork --> Procedure A (must only launch) --> OR (both Procedure A and Map B feed into the OR) --> Map C (must complete) --> END
Map B (must complete successfully)
In case the "diagram" above is not clear I have "FORK" that splits to call Procedure A as well as Mapping B. Both Procedure A and Mapping B go to an "OR." The "OR" gooes to Map B. Map B goes to "END."
Thanks in advance for your thoughts and experience.
- Sam
PS I am on OWB 10.2.0.1

Hi Mahesh,
If I do as you state, I think it is true that only after my PROC has completed will the job continue.
Is this true?
I want to make sure that all steps continue "immediately" and are not forced to wait for the completion of my procedure.
So I want the procedure to start, but I know it will take a long time and do not want the other steps to wait.
Thanks,
Sam
Edited by: Sammi on Oct 3, 2011 11:32 AM

How to set E-Mail Activitie in Process Flow

Hi All,
I am very new to OWB and i created process flow based on documents.Process flow run successfully.Now i need to set E-mail Activity to that process flow. i read some of links and help topics.But iam not clear.so pleaseme tell how to do.
Thanks,

Hi
You just add the Email icon to the palette and if a process runs sucess or error (depends on your transition). Just add the email icon and click on it. Fill in the necessery values, such as
From
To
Subject
Body
SMTP server.
If you have a mailserver installed on your machine - just enter "localhost".
Else you will need to use an existing email server.
BR / Ander

How to check mappings execution time in Process flow

Hi All,
We created one process flow and scheduled it. It is successfully completed after 30 Minutes.
Process flows contains 3 mappings, First mapping complete sucessfully, Second mapping will start, after completing successfully second mapping. Third mapping will start and complete sucessfully. Success emails will generate.
I would like to know which mapping is taking long time execution.
Could you please suggest how can we find which mapping is taking long time execution.
I dont like to run each mapping indiviual and see the execution time.
Regards,
Ava.

Execute the below query in OWB owner or User schema
In place of '11111' give the execution id from control center.
select Map_run.NUMBER_RECORDS_INSERTED,
map_run.NUMBER_RECORDS_MERGED ,
map_run.NUMBER_RECORDS_UPDATED ,exe.execution_audit_id, Exe.ELAPSE_TIME,exe.EXECUTION_NAME,exe.EXECUTION_AUDIT_STATUS,map_run.MAP_NAME
from ALL_RT_AUDIT_MAP_RUNS Map_run,ALL_RT_AUDIT_EXECUTIONS Exe
where   exe.EXECUTION_AUDIT_ID=map_run.EXECUTION_AUDIT_ID(+)
        and exe.execution_audit_id > '11111'
        order by exe.execution_audit_id descCheers
Nawneet
Edited by: Nawneet on Feb 22, 2010 4:26 AM

OWB Error: Connection lost when assign a schedule to a process flow

I have:
- OWB 11Gr2
- Oracle DB 10Gr2 Source/Target
I have created a schedule module and set the location to be one of the target DB locations.
Create a one of schedule and scheduled for daily execution.
Open configuration of a process flow and assign with the schedule.
After this, i tried to save the repository, and occurred the error message:
"Repository Connection Error: The connection to the repository was lost, because of the following database error: Closed Connection
Exit OWB without committing."
The connection with the repository was lost and i can´t do more anything.
I tried to create a separate location for the schedule, but it don´t make difference
What´s happening?
Thanks,
Afonso

Wea re running 11.2.0.2 and
When looking at the trace log
Dump continued from file: /data02/oramisc/diag/rdbms/dpmdbp/dpmdbp/trace/dpmdbp_ora_13503.trc
ORA-00600: intern felkod, argument: [15570], [], [], [], [], [], [], [], [], [], [], []
With this query "========= Dump for incident 16022 (ORA 600 [15570]) ========
*** 2011-10-18 09:52:25.445
dbkedDefDump(): Starting incident default dumps (flags=0x2, level=3, mask=0x0)
----- Current SQL Statement for this session (sql_id=7a76281h0tr2p) -----
SELECT usage.locuoid, usage.locid, cal_property.elementid, cal_property.classname, schedulable.name || '_JOB' name, schedulable.name || '_JOB' logicalname, cal_property.uoid, cal_property.classname
, cal_property.notm, cal_property.editable editable, cal_property.customerrenamable, cal_property.customerdeletable, cal_property.seeded, cal_property.UpdateTimestamp, cal_property.strongTypeName,
cal_property.metadatasignature signature, 0 iconobject FROM Schedulable_v schedulable, CMPStringPropertyValue_v cal_property, CMPCalendarInstalledModule_v cal_mod, CMPPhysicalObject_v sched_phys, CM
PCalendar_v cal, ( select prop.firstclassobject moduleid, prop.value locuoid, 0 locid from CMPPhysicalObject_v phys, CMPStringPropertyValue_v prop where prop.logicalname = 'SCHEDULE_MODULE_CONFIG.DE
PLOYMENT.LOCATION' and prop.propertyOwner = phys.elementid and phys.namedconfiguration = 42636 union select installedmodule, '' locuoid, location locid from CMPLocationUsage_v locUse where deployme
ntdefault = 1 and not exists ( select null from CMPPhysicalObject_v phys, CMPStringPropertyValue_v prop where prop.logicalname = 'SCHEDULE_MODULE_CONFIG.DEPLOYMENT.LOCATION' and prop.firstclassobjec
t = locUse.installedmodule and prop.propertyOwner = phys.elementid and phys.namedconfiguration = 42636) ) usage WHERE cal_mod.elementid = usage.moduleid and cal_mod.elementid = cal.calendarmodule a
nd substr(cal_property.value,0,32) = cal.uoid and cal_property.logicalname='SCHEDULABLE.PROPERTY' and (cal_property.firstclassobject = schedulable.elementid or cal_property.firstclassobject = sched
_phys.elementid and sched_phys.logicalobject = schedulable.elementid) and cal_mod.owningproject = 42631 and cal_property.propertyowner = sched_phys.elementid and sched_phys.namedconfiguration=42636
ORDER BY schedulable.name || '_JOB'"
Coulöd be possible this bug
Bug 12368039 ORA-600 [15570] with UNION ALL views with Parallel steps
This note gives a brief overview of bug 12368039.
The content was last updated on: 18-MAY-2011
Click here for details of each of the sections below.
Fixed:
This issue is fixed in
* 11.2.0.3

OWB 10.1 -- How to make a JOB agains a process flow.

Similar Messages

Maybe you are looking for