OWB 10.2.0.5 with workflow 2.6.2

Hi,
I'm using Oracle Workflow 2.6.2, Oracle Database 9.2 and OWB 10.2.0.5.
I couldn't create the Oracle Workflow Location as I got the following error: The connection test to the database was successful, but workflow is not detected - Please use workflow schema.
I don't know what's the problem. as the workflow instalation is ok.
Any idea?
Thanks.

Hi Oleg,
I've run this query and it returned nothing.
If I executed "+select * from WF_RESOURCES+" I get the following result:
TYPE     NAME     LANGUAGE     SOURCE_LANG     ID     TEXT     PROTECT_LEVEL     CUSTOM_LEVEL
WFTKN     WF_SYSTEM_GUID     US     US     0     7AC9849FA8371A30E044080020ACF7CA     0     0
WFTKN     WF_SYSTEM_STATUS     US     US     0     ENABLED     0     0
Does it mean that the repository wasn't ok?
Thanks

Similar Messages

Start OWB Process Flow Schedule Job in Workflow Manager

I am trying to get the Oracle Workflow Schedule to execute my Oracle Warehouse Builder (OWB) Process Flow. Please note that execute Process Flow from the OWB deployment manager works fine. I did the following but nothing being executed:
Info:
OWB: 10g
Oracle DB: 10g
Oracle Workflow: 2.6.3
OracelAS: NONE
1. From the Oracle Workflow Manager browser, click the Background Engines->Submit New
2. Insert the following parameter:
Work Item Type: LD_STG
Run Date and Time: 10/18/2004 17:40:00
Run Every: 0 days, 00 hours, 01 minutes, 00 seconds
3. Click ok and system showed "Successfully submitted Background Engine with job number 107"
However, after the specificied schedule time, nothing happened. No error shown in the Work Item.
Any help are greatly appreciated. Thanks.

This is a Oracle Workflow client problem. Can you post this to the workflow forum (Workflow
Regards:
Igor

Its compatible OWB 9.0.4.10 with W2003 and Oracle 10.2.0.1?

I have to migrate a DWH on Server 1 (OWB 9.0.4.10, Oracle Workflow 2.6.2, Windows 2000, Oracle 9.2.0.6) to Server 2 1 (OWB 9.0.4.10, Oracle Workflow 2.6.3, Windows 2003, Oracle 10.2.0.1)
Its posible to use OWB 9.0.4.10 with W2003 and Oracle 10.2.0.1?
Thanks very much in advance!

Hi,
This is the relevant section from Metalink's 'Certify' section:
Server Certifications
Product      Server      Status      Addtl. Info.      Components      Other      Issues
10.1.0.x      9.2.0.x      Certified      None      None      Yes      None
10.1.0.x      8.1.7 (8i)      Desup:RDBMS      None      None      N/A      N/A
10.1.0.x      10.2.0.x      Certified      Yes      None      Yes      None
10.1.0.x      10.1.0.x      Certified      None      None      Yes      None
Additional info on 10gR2 DB: Database 10.2.0.x is only certifed with Oracle Warehouse builder patch set 10.1.0.4 or higher.
So: bad luck, need to upgrade OWB 10.1.0.4 to at least.
I suggest you learn to use Metalink for having these kinda questions answered.
Good luck,
Erik Ykema

SSO/OID with Workflow

Do we have to purchase Advanced Security option of 9i database if we want to use SSO with Workflow ?
Thank you
Aamir

Aamir,
I don't belive so, but you might want to check the licensing terms for using the Oracle Single-Sign-On server. For workflow to work, all you need it the mod_osso module which comes with Oracle SSO server.
Thanks,
Raja

Issue with Workflow in a SharePoint-hosted App Application

Hi,
I have created a Sharepoint-hosted app which has a list workflow in it. After I deploy it to the sharepoint server, I can not find any workflow under the associated list.
However, I did have target list associated with workflow in workflow project property.
(My app and worflow is developed in VS 2012)
I have searched the forum and found some similar question. However, all of them don't have useful answers.....
Can anyone give me some help~?

Hi Baron123,
I can reproduce your scenario, that create an app with list, and add a workflow associates with it, the workflow is not working, that seems doesn’t associates successfully.
Before I can tell why this happens, I found a helpful blog about keeping the list definitions and workflow definitions separate, use Handle APP installed event receiver to wire up a workflow to lists in app web or host web.
As it is not a good solution to deploy the list and workflow in the same app solution, because that if you redeploy the app the date will be lost, the list will be new created, so I would suggest you to reference the blog, check whether this can meet your
requirement.
SharePoint Apps and Workflow:
http://jonfancey.azurewebsites.net/2013/03/22/SharePointAppsAndWorkflow.aspx
Thanks,
Qiao Wei
TechNet Community Support

How to do binding of rule with workflow

hi all
i have a problem regarding the binding of rule ,which i have maintained ,with the workflow on which i am working.
can any one please guide me how to do the binding of rule with workflow,the way am doing is like:
i have vreated a container element in workflow compatible with container element used in rule where agents are kept.
problem is arising when am trying to import that container in rule to my workflow ,at this step please suggest what should i bind in the binding of the workflow container.
the exact parameters detail will really appreciated.
am not new to the rule or workflow but somehow thing am doing is not working exactly the way i want it to be so.
full marks will be rewarded
best regards
ashish

Hi Ashish,
Please refer the following link. It may be helpful.
http://help.sap.com/saphelp_crm60/helpdata/en/c5/e4b0ae453d11d189430000e829fbbd/content.htm
Regards,
Johnny.

Document Management integration with Workflow

Hi anybody,
I have to setup a workflow using Oracle Databse Server 8.1.7, Oracle 9i Application Server 1.0.2.2.1 and Workflow 2.6 on Windows 2000 Advanced Server.
Trying to run the sample workflow
"Workflow Demonstrations/Document Management"
(http://<host>:<port>/pls/<wf_dad>/wf_initiate.Process?ItemType=WFDM), I get the following problem:
When I push the button "Send Document" to attach a document, the new browser window shows :
"The page cannot be found". The url is like this: http://orc9:7778/jbc/aol/Oasjbc?template=dm_create.htm ...
Does anyone know what is missing or wrong configured here?
Which Document Management software can be used together with Workflow in order to be able to attach documents to items?
Can Internet File System be used here?
Thank you for your help in advance!
Dorian

Hi Dorian
The existing document management feature in Workflow is reserved for future use. If you want to use iFS and Oracle Workflow together, there is a technical whitepaper available on OTN. Navigate OTN:Products:Oracle Internet File System->Technical Information.
CHeers
Mark
Hi anybody,
I have to setup a workflow using Oracle Databse Server 8.1.7, Oracle 9i Application Server 1.0.2.2.1 and Workflow 2.6 on Windows 2000 Advanced Server.
Trying to run the sample workflow
"Workflow Demonstrations/Document Management"
(http://<host>:<port>/pls/<wf_dad>/wf_initiate.Process?ItemType=WFDM), I get the following problem:
When I push the button "Send Document" to attach a document, the new browser window shows :
"The page cannot be found". The url is like this: http://orc9:7778/jbc/aol/Oasjbc?template=dm_create.htm ...
Does anyone know what is missing or wrong configured here?
Which Document Management software can be used together with Workflow in order to be able to attach documents to items?
Can Internet File System be used here?
Thank you for your help in advance!
Dorian

Publishing site with Workflow not working properly

Hello All
I have created a Publishing Site Collection on SharePoint 2013 on-premises and when I create a new sub-site using the "Publishing site with Workflow" template, I get redirected to
the site home page and I get the option to PUBLISH the page. But, when I try to publish the page, I get a server error. Now, instead of trying to publish the page, if I refresh the page I this time get an option to check-in the page, after checking the page
in, i get the option to publish it, now I can publish the page without any error. This does not happen on my DEV server, but only on QA. I am using the "Publishing site with Workflow" template,
which associates an OOB Page Approval workflow with the Pages Library.
Please help me guys!
Parth

Hi Parth,
Based on your description, you encountered the issue with Publishing site with worklfow site template.
Please provide more detail information about error returned, and see if there is related error message in ULS log.
Could you please recreate a new site on DEV server to see if the issue still occurs?
I wonder if there is difference on Workflow related settings between DEV server and QA server.
Regards,
Rebecca Tu
TechNet Community Support

Using PowerShell Remoting with Workflows and Functions

Hello,
I have an existing set of scripts with a mixture of Modules containing the functions, Workflows that call the functions and Main script that invokes the workflows.
Step 1: The Main script picks up the list of servers from a custom db and invokes the relevant workflow for further operation
Step 2: The workflow runs as foreach parallel and calls a function by passing the server name as a parameter
Step 3. The function in the module does the real job
All of this runs, from a central location. 90% of the server are geo dispersed. This seems to be a bit of a concern in terms of turnaround time is too high.
Hence, I would like to use WinRM (PowerShell Remoting). I have configured WinRM on all the Server with Firewall Exception.
My Queries:
1. Apart from using Enter-PSSession or Invoke-Command, are there any other CMDLet's?
2. Say for example; I plan to use Enter-PSSession, should I embed the code with Workflow?
3. How will it retrieve the output?
Please advice, Thanks
Rajiv

You cannot use Enter-PSSession in a script.
It's only intended to be used interactively from the console. If you try to use it in a script, the script will run the subsequent commands on the local system, not in the remote session.
You'll need to use Invoke-Command, and you'll have to include the function definitions in the invoked script block, since those functions will not exist in the remote sessions.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

CAT2 - Issue with workflow task TS20000460

Reposting the query in ABAP General Section.
CAT2 - Issue with workflow task TS20000460
Waiting for any suggestion?
Edited by: Amit Khare on Sep 10, 2009 3:01 PM
Closing due to no responses.
Edited by: Amit Khare on Sep 10, 2009 3:40 PM

Hi,
Could you figure out why the event linkage is breaking when you make it Gen.Task? I think, there is some problem in your wflow template. May be do a Syntax Check in the testing environment. If that time, some error happens, then by the System Defaults in the Event linkage SWETYPV, it will deactivate the linkage.
I don't think this has got anything to do with you making TS as Gen.Task. Did you see the even trace to see what's the error for linkage breaking ?
More info. would help in identifying the issue.
Regards,
venu

Integration with workflow

Hi,
Is Portal integrated with workflow?

can you please clearify what and how do you want to integrate the same

Take Control of Workflow with Workflow Analyzer! See Note 1369938.1

Take Control of Workflow with Workflow Analyzer! Immediate Analysis and Output of your EBS Workflow Environment.
The EBS Workflow Analyzer is a script that reviews the current Workflow Footprint, analyzes the configurations, environment, providing feedback, and recommendations on Best Practices and areas of concern.
Video - Watch a 9-minute overview video (9:00)
Go to [Doc 1369938.1|https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1369938.1] for more details and Script Download.
Proactive Benefits:
Immediate Analysis and Output of Workflow Environment
               Identifies Aged Records
              Identifies Workflow Errors & Volumes
              Identifies looping Workflow items and stuck activities
              Identifies Workflow System Setup and configurations
              Identifies and Recommends Workflow Best Practices
Easy To Add Tool for regular Workflow Maintenance
Execute Analysis anytime to compare trending from past outputs
[Please send any items to Feedback.|https://communities.oracle.com/portal/server.pt?open=514&objID=224&mode=2&threadid=297966]
Edited by: user715498 on Feb 14, 2012 11:09 AM
Edited by: user715498 on Feb 14, 2012 11:12 AM

14. Once my photos look the way I want, I then export them to JPEG. I have set up a Photoshop droplet for Lightroom that will then do all my sharpening after export.
That's it! I know it sounds like a lot of steps, but once you've done it a couple of times it goes by really quick. I'm really loving most things about Lightroom in terms of its cataloging and export options. But the image quality of the Lightroom raw conversions just isn't there yet. I've found by integrating both Capture NX and Lightroom I can get top quality results while still gaining advantage of Lightroom's many nice features. It took me a few days of exploration and experimentation to nail down the optimal workflow for my needs. Hopefully this will help some others out and maybe give them some ideas of their own toward a better workflow.
Please feel free to share your thoughts or own experience on all of this.
Thanks to Tony Long for his suggestion in this thread, which caused me to go on a search for the optimal Lightroom/Capture workflow: http://www.adobeforums.com/cgi-bin/webx?7@@.3bc719df/3
If you are interested in taking a look at the final output of the workflow listed above, please look here: http://photos.unsavory.com/p634883589
Cheers everyone!
-©aine

Bdc not working with workflow

Hallo,
I have an issue with a bdc FM i created not working with workflow.
If I test the FM, it works ok.
If i Test the method calling the FM it works ok.
if i test the task calling the method it works ok.
If I run the workflow it doesn't work, and i get the following messages:
S     DC     1     Unable to initialise ABAP Control Framework ...
S     DC     1     Unable to initialise ABAP Control Framework ...
S     DC     6     Control Framework: Fatal error - GUI cannot be reached
A     SY     2     Exception condition "CNTL_ERROR" raised.
What is the meaning of this??
Bdc is calling Me54n to set to click on reject button during Purchase Requisition Release,
putting the PR processing state in status '08'
I checked all the binding which are fine. No container parameter are passed a part from the business object.
here is the FM coding:
FUNCTION ZME_N_WF_REJ_PR.
""Local interface:
*" IMPORTING
*"     VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*"     VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*"     VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*"     VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*"     VALUE(USER) LIKE APQI-USERID OPTIONAL
*"     VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*"     VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*"     VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*"     VALUE(BANFN_003) LIKE BDCDATA-FVAL
*" EXPORTING
*"     VALUE(SUBRC) LIKE SYST-SUBRC
*" TABLES
*"      MESSTAB STRUCTURE BDCMSGCOLL OPTIONAL
subrc = 0.
perform bdc_nodata      using NODATA.
perform open_group      using GROUP USER KEEP HOLDDATE CTU.
perform bdc_dynpro      using 'SAPLMEGUI' '0014'.
perform bdc_field       using 'BDC_OKCODE'
                              '=MECHOB'.
*perform bdc_field       using 'DYN_6000-LIST'
                             LIST_001.
perform bdc_field       using 'BDC_CURSOR'
                              'MEREQ3328-AFNAM'.
*perform bdc_field       using 'MEREQ3328-EKGRP'
                             EKGRP_002.
perform bdc_dynpro      using 'SAPLMEGUI' '0002'.
perform bdc_field       using 'BDC_OKCODE'
                              '=MEOK'.
perform bdc_field       using 'BDC_CURSOR'
                              'MEPO_SELECT-BANFN'.
perform bdc_field       using 'MEPO_SELECT-BANFN'
                              BANFN_003.
perform bdc_dynpro      using 'SAPLMEGUI' '0014'.
perform bdc_field       using 'BDC_OKCODE'
                              '=MEREJECT'.
perform bdc_field       using 'BDC_CURSOR'
                              'DYN_6000-LIST'.
perform bdc_dynpro      using 'SAPLMEGUI' '0014'.
perform bdc_field       using 'BDC_OKCODE'
                              '=MESAVE'.
perform bdc_field       using 'BDC_CURSOR'
                              'DYN_6000-LIST'.
perform bdc_transaction tables messtab
using                         'ME54N'
                              CTU
                              MODE
                              UPDATE.
if sy-subrc <> 0.
subrc = sy-subrc.
exit.
endif.
perform close_group using     CTU.
ENDFUNCTION.
INCLUDE BDCRECXY .
I tries the same approach on ML81N to block a service entry sheet.(pressing the lock icon),
I get exactly the same issue.
Anybody knows how to resolve?
Or how to do the same without using a bdc call?
regards,
marco

Hi
this is the Method callind the FM
object is BUS2105 w delegation ZBUS2105.
BEGIN_METHOD ZRELEASEREJECTED CHANGING CONTAINER.
Data: CTU TYPE APQI-PUTACTIVE,
      MODE TYPE APQI-PUTACTIVE,
      UPDATE TYPE APQI-PUTACTIVE,
     NODATA TYPE APQI-PUTACTIVE.
CTU = 'X'.
MODE = 'N'.
UPDATE = 'L'.
NODATA = '/'.
iobjectkey = object-key.
   CALL FUNCTION 'ZME_N_WF_REJ_PR'
     EXPORTING
       BANFN_003 = iobjectkey
       NODATA = NODATA
       UPDATE = UPDATE
       MODE = MODE
       CTU = CTU
     IMPORTING
       SUBRC = SUBRC
     TABLES
       MESSTAB = MESSAGE
     EXCEPTIONS
       OTHERS = 01.
   CASE SY-SUBRC.
     WHEN 0.            " OK
     WHEN OTHERS.       " to be implemented
   ENDCASE.
SWC_SET_ELEMENT CONTAINER 'Subrc' SUBRC.
SWC_SET_TABLE CONTAINER 'MESSAGE' MESSAGE.
END_METHOD.

Bdc not working with workflow - background task

Hallo,
I have an issue with a bdc FM i created not working with workflow.
If I test the FM, it works ok.
If i Test the method calling the FM it works ok.
if i test the task calling the method it works ok.
If I run the workflow it doesn't work, and i get the following messages:
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 6 Control Framework: Fatal error - GUI cannot be reached
A SY 2 Exception condition "CNTL_ERROR" raised.
What is the meaning of this??
Bdc is calling Me54n to set to click on reject button during Purchase Requisition Release,
putting the PR processing state in status '08'
I checked all the binding which are fine. No container parameter are passed a part from the business object.
here is the FM coding:
FUNCTION ZME_N_WF_REJ_PR.
""Local interface:
*" IMPORTING
*" VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*" VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*" VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*" VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*" VALUE(USER) LIKE APQI-USERID OPTIONAL
*" VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*" VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*" VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*" VALUE(BANFN_003) LIKE BDCDATA-FVAL
*" EXPORTING
*" VALUE(SUBRC) LIKE SYST-SUBRC
*" TABLES
*" MESSTAB STRUCTURE BDCMSGCOLL OPTIONAL
subrc = 0.
perform bdc_nodata using NODATA.
perform open_group using GROUP USER KEEP HOLDDATE CTU.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MECHOB'.
*perform bdc_field using 'DYN_6000-LIST'
LIST_001.
perform bdc_field using 'BDC_CURSOR'
'MEREQ3328-AFNAM'.
*perform bdc_field using 'MEREQ3328-EKGRP'
EKGRP_002.
perform bdc_dynpro using 'SAPLMEGUI' '0002'.
perform bdc_field using 'BDC_OKCODE'
'=MEOK'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_SELECT-BANFN'.
perform bdc_field using 'MEPO_SELECT-BANFN'
BANFN_003.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEREJECT'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MESAVE'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_transaction tables messtab
using 'ME54N'
CTU
MODE
UPDATE.
if sy-subrc 0.
subrc = sy-subrc.
exit.
endif.
perform close_group using CTU.
ENDFUNCTION.
INCLUDE BDCRECXY .
I tries the same approach on ML81N to block a service entry sheet.(pressing the lock icon),
I get exactly the same issue.
Anybody knows how to resolve?
Or how to do the same without using a bdc call?
regards,
marco

Hallo,
I have an issue with a bdc FM i created not working with workflow.
If I test the FM, it works ok.
If i Test the method calling the FM it works ok.
if i test the task calling the method it works ok.
If I run the workflow it doesn't work, and i get the following messages:
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 6 Control Framework: Fatal error - GUI cannot be reached
A SY 2 Exception condition "CNTL_ERROR" raised.
What is the meaning of this??
Bdc is calling Me54n to set to click on reject button during Purchase Requisition Release,
putting the PR processing state in status '08'
I checked all the binding which are fine. No container parameter are passed a part from the business object.
here is the FM coding:
FUNCTION ZME_N_WF_REJ_PR.
""Local interface:
*" IMPORTING
*" VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*" VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*" VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*" VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*" VALUE(USER) LIKE APQI-USERID OPTIONAL
*" VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*" VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*" VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*" VALUE(BANFN_003) LIKE BDCDATA-FVAL
*" EXPORTING
*" VALUE(SUBRC) LIKE SYST-SUBRC
*" TABLES
*" MESSTAB STRUCTURE BDCMSGCOLL OPTIONAL
subrc = 0.
perform bdc_nodata using NODATA.
perform open_group using GROUP USER KEEP HOLDDATE CTU.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MECHOB'.
*perform bdc_field using 'DYN_6000-LIST'
LIST_001.
perform bdc_field using 'BDC_CURSOR'
'MEREQ3328-AFNAM'.
*perform bdc_field using 'MEREQ3328-EKGRP'
EKGRP_002.
perform bdc_dynpro using 'SAPLMEGUI' '0002'.
perform bdc_field using 'BDC_OKCODE'
'=MEOK'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_SELECT-BANFN'.
perform bdc_field using 'MEPO_SELECT-BANFN'
BANFN_003.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEREJECT'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MESAVE'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_transaction tables messtab
using 'ME54N'
CTU
MODE
UPDATE.
if sy-subrc 0.
subrc = sy-subrc.
exit.
endif.
perform close_group using CTU.
ENDFUNCTION.
INCLUDE BDCRECXY .
I tries the same approach on ML81N to block a service entry sheet.(pressing the lock icon),
I get exactly the same issue.
Anybody knows how to resolve?
Or how to do the same without using a bdc call?
regards,
marco

Oracle workflow consultant (with workflow builder exp)

May 25 2004
Our client is a major bank in Jamaica and they have a requirement for an Oracle Workflow Consultant. This is a 6 months contract and it would be 3 weeks/month in Jamaica and 1 week/month back home. All expenses including trave, accomodation (5 star) and meals would be taken care of. There would also be a per diem and a bonus at the end of contract.cllient considering US/Canada based consultants.
·     A Technical Consultant with expert experience with Workflow
·     Expert technical experience and strong functional knowledge
·     Experience using Workflow Builder as a tool
·     Experience with configuration, customization, and modification of pre-configured workflows with Workflow Builder to suite business applications
·     Customization of workflow and optional set-ups such as enabling email process
·     Experience with configuration/escalation/exceptions in workflow
·     Workflow Builder is accessed at the systems administration level so consultant has to have experience with systems administration (application system administration)
·     A workflow guru would have performed this function for at least 50% of the time (rest of the time he/she would have done application system administration, technical design/development
Skills:
Very strong technical user level of workflow
Very strong experience with Workflow Builder
Oracle 11i, SQL or SQL Plus
Workflow knowledge from HR or elements of HR Module
Please contact for more details:
Rohini Mehtani
IT Resource Consultant
Bevertec
[email protected]
416-695-7525 ext: 229

Could you please tell me ...........
Whether Oracle application version 11.5.9 is compatible with OAF 11.5.10 (patch p4045639_11i_GENERIC). If yes, then why my pages are not working?
Not even the Existing FWK Tutorial application is also not working, nothing is working!!! Do I need to modify somehting?
Please suggest any solution I have to Develop new self service application.

OWB 10.2.0.5 with workflow 2.6.2

Similar Messages

Maybe you are looking for