OWB 10.2 and DB 11g as source

Hi ,
i have OWB 10.2 installed with DB 10.1 , can i use DB 11g as source ?
regards
Padideh

Hi Padideh ,
OWB 10.2.0.4 is a patch release , it is not a full release , hence it is not available in OTN.
Goto Metalink and search for Patch 7005587 .
Download it and apply it to both server side and client side .
Thanks,
Sutirtha

Similar Messages

Mapping Roles/Groups between Oracle EBS R12 and OBIEE 11g

Hi,
We are implementing OBIEE 11g with Oracle EBS R12 as source system. Also we are using Out of the box RPD for Oracle EBS R12.
But we are facing lot of challenges to map OBIEE 11g groups and EBS roles and responsibilities. We do not have prior experience with EBS as source system.
Can anyone tell how to map between obiee groups with Oracle E-Business suit R12
Is there any document link or notes regarding this.
Any information regarding this will be a great help.
Thanks in advance

Hi,
I am also looking for the solution to implement SSO of OBI 11g with EBS r12, what i understand from your post that you have configured SSO between OAM and EBS R12.
Below is the link to configure SSO between EBSR12 and OBI 11g.
http://www.astcorporation.com/images/PDFs/White_Papers/2012/AST_White_Paper-EBS-OBIEE_11g_Integration.pdf
I want one clarification from you , once you read the above article what is your opinion do we require OAM integration if we want only EBS SSO with OBI11g ? I am bit confused in this ?
Whats the use of OAM in this integartion ?
Can you please help me.
Thanks in Advance.
Regards,
Tarang Jain

OWB, Oracle WorkFlow, and OEM

I am a DBA who has been charged with the task of integrating Oracle Warehouse Builder, Oracle Workflow and OEM. Our source database is 9i but our Intelligence Team would like to use 10G. Does anyone know how I might install this? Should I install 10G, then create a database for OWB and Oracle Workflow? Any direction would be helpful.

Hi,
Have you found an answer? If not read on.
We are also having the same combination.
1. Identify a target server (datawarehouse server).
2. Install 10G database on it (create a seed database with DWH option).
3. Install OWB
4. Install workflow server.
Then , make OWB setups :
1. Install a design repository, through which the team can carry out ETL in the OWB client.
2. Install a runtime repository which creates 2 users - a runtime repository owner and a runtime access user('connect as') user when deploying the ETL mappings.
3. Install a target schema using the runtime where the target objects - tables, dimensions and cubes will be created.
Then, in OWB, the team have to configure the source modules as 9i and the target modules as 10g.
Hope this helps.
Regards,
Usha

We have build a nice Flex BI front end and want to open-source it would this be useful to the group?

Hello, I am the CEO of DataRoket (www.dataroket.com) and we are a data integration and analytics platform. As part of our effort, we have built a really nice data visualization and reporting package.
Since this is not our core business and we want to give back to the community and also see it continue to evolve, we are going to open source the Data Visualization module of data roket.
You can look at the application by going to www.dataroket.com. If we did this, we would like to get some people to work on this and use it freely for your clients etc.
I want to know two things please:
1. is this interesting and would it be useful to the community
2. Are there people that would like to continue to push this capability and shepard the open source effort with us?
Thanks in advance for your feedback
James Fox
[email protected]

I like the idea of open source. Have you considered adding a demo/dummy Flex
app to your website for a fictional business. Just to show your capabilities.

How to install Discoverer 11g on Web Logic Server with Forms and Reports 11g Rel2

Hello,
We finally started to migrate from Oracle iAs 10g Release 2 to Oracle Forms and Reports 11g Release 2 using Web Logic. I don't see an option to install Discoverer on the server.
My OS: windows 2008 R2
Installed Web Logic 10.3.6
Forms & Reports: 11.1.2.2.0_64 (64 Bit Forms)
How do I install Discoverer Plus in 11g? All I can find is Discoverer 11g Desktop/Administrator to run on User work Station. We were using discoverer Plus in 10g iAS.
Thanks
Rao

907485 wrote:
Hi:
I need to install oracle 11g from VNC viewer. The VNC is stalled on linux. I managed login. Now I have a screen that has some icons on the top like, Connection Options, "i", refresh, CTRl, ...
under that I have
Accept clipboard from viewers
Send clipboard to viewers
Send primary selection to viewers
From the Connection Options window, I checked Hextile for Use encoding and Let remote server deal with mouse cursor.
What is next? How do I connect to the server. (When I login I used hostname:1)
Thankyou.we only know what you post.
where does linux reside?
where is VNC installed?

Cisco Systems vs "CSIRO" 802.11a and 802.11g infringed upon the '069 patent

Hi,
any news about Cisco Systems and the "CSIRO" 802.11a and 802.11g infringed upon the '069 patent ?
http://www.buffalotech.com/products/wireless/
Dear Customer
As you may be aware, Commonwealth Scientific and Industrial Research Organisation ("CSIRO") sued Buffalo, Inc. and Buffalo Technology (USA), Inc. ("Buffalo"), for alleged infringement of United States Patent No. 5,487,069 ("the '069 patent"). Subsequently, CSIRO also asserted its patent against the entire wireless LAN industry, including, Microsoft, Intel, Accton, SMC and Netgear.
In it's lawsuit against Buffalo, CSIRO claimed certain Buffalo wireless networking products compliant with IEEE standards 802.11a and 802.11g infringed upon the '069 patent. Buffalo believed at that time and continues to believe that there are no grounds for CSIRO's allegations of infringement. The United States district court, however, found Buffalo to infringe the '069 patent and enjoined the importation and sale of Buffalo's IEEE 802.11a and 802.11g compliant products.
CSIRO's lawsuits are against the entire wireless LAN industry and could affect the supply of wireless LAN products by any manufacturer, not just Buffalo. The entire industry is resisting CSIRO's attempts to enjoin the sale of wireless LAN products. Recently, Microsoft, 3COM Corporation, SMC Networks, Accton Technology Corporation, Intel, Atheros Communications, Belkin International, Dell, Hewlett-Packard, Nortel Networks, Nvidia Corporation, Oracle Corporation, SAP AG, Yahoo, Nokia, and the Consumer Electronics Association filed briefs in support of Buffalo's position that injunctive relief is inappropriate in this case.
During the period of time that the injunction is in effect (10/1/2007), Buffalo cannot offer for sale, sell, import, or use its IEEE 802.11a and 802.11g compliant products in the United States. A list of the products covered by the injunction is attached here . The injunction does not prohibit sales of pre-existing inventories of products by Buffalo's customers. In addition, Buffalo has secured CSIRO's agreement to permit the replacement of defective products under warranty. None of Buffalo's other products are currently affected by this injunction.
While Buffalo believes that it will be successful in reversing the district court's decision and will obtain a stay of the injunction pending a decision on the merits, the Court of Appeals has not yet issued a decision. Should the Court of Appeals issue a decision staying the injunction, you will be promptly notified. After the stay is issued or a favorable decision on the merits is obtained, Buffalo will be able to resume the supply of IEEE 802.11a and 802.11g products
Please rest assured that Buffalo continues to stand behind their products and will continue to support all of our loyal customers as it relates to product warranties, technical support and the like without interruption.

I suspect after reading the patent and the litigation that you mentioned above, that the US District Court decision will be reversed as the patent appears to be very vague in its contsruction and verbage. Furthermore, the intent to hold the IEEE hostage on the ratification of 802.11n will not bode well in the court's eyes. If in fact the case is reversed, I believe that the members of CSIRO will be in danger of lost profits litigation from Buffalo. Stay tuned to this bat channel.

How to run a silent configuration for Forms and Reports 11g ?

Hi all,
I've run a silent installation for Oracle Forms and Reports 11g R2 in Windows 7 64 bit.
I made it using a response file called install_only.rsp. Now I want to run the configuration also in silent mode.
How can I do it ?
I know that I can use a template called configure_only.rsp. However, i don't know what is the correct syntax for the command to start configuration.
Should I use the same setup.exe installer and inform configure_only.rsp as response file ?
The command below is the appropriate command for this task:
setup.exe -silent -response configure_only.rsp
Or is there another way to be followed?
Thanks a lot.

Alright, I eventually found the answer.
Configuration must be run from directory on windows.
Command is shown below:
<FORMS_HOME>/bin/config.bat -silent -response <path-to-response-file>

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

Soa 11g and jdeveloper 11g user defined extension function

I have developed a set of extension functions,
in design time for the previous version, I can put the deployment file (jar file) that contains the extension functions in the %JDEV_HOME%\jdev\lib\ext directory and jdeveloper recognizes the set of extension functions if previously i have defined an xml descriptor with every one of the functions i need to include in the panel.
Now, with the jdeveloper 11g i have tried the same, and jdev recognizes the functions, but when I am going to test one transformation that includes the extension function, the parser is not founding the jar file; the error (in spanish) is:
XML-22045: (Error) Error de funcion de extension: No se ha encontrado la clase '
Falta la clase: aac._shared.extensions.xsl.XmlW3cDomFunctions
Clase Dependiente: oracle.xml.xpath.XSLExtFunctions
Cargador: main:11.0
Origen del Codigo: /C:/.extracted/jdevstudio1111/lib/xmlparserv2.jar
Configuraci≤n: system property PCLMain.createExtensionManagerLoader()
Esta carga se ha iniciado en main:11.0 mediante el mΘtodo loadClass().
La clase que falta no esta disponible desde ningun origen de codigo o cargador del sistema.
my dude is:
+ at design time, where can I put the jars with extension functions to make one transformation function used in a mediator component can works fine?
+ at runtime, where can I put those libraries? (in the previous version, we can put this libraries in the %APP_SERVER%\j2ee\home\applib, or create one shared library and reference it in the oracle.bpel.common shared library declaration of the server.xml configuration file).

Hi,
please post this question to the JDeveloper 11 forum. Please translate the messages into English as well
JDeveloper and OC4J 11g Technology Preview
Frank

I am trying to migrate from macbook to a new imac and the looking for source keeps spinning

I am trying to migrate from macbook to a new imac and the looking for source keeps spinning

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Dynamic endpoints in SOA and OSB 11g

Hi,
In AIA we have aiaconfiguration properties.xml from where end points of wsdls will be accessible.
This enables ease in migrations so that if endpoint changes it is only need to be changed in aiaconfiguration properties.xml.
Can the same be acheived in SOA and OSB 11g projects?
Thanks,
Sowmya

Hi Sowmya,
Yes, it is very much possible in OSB 11g using customization (you may use it manually or programmitically). Please refer -
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15867/customization.htm#CACJCAGD
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15022/toc.htm
Regards,
Anuj

Oracle UCM 10gr3 and webcenter 11g, WCM Portlets

Hi,
I have installed Oracle UCM 10gR3, Site Studio 10gR4 and Webcenter 11g. Now my problem is how to get the WYSIWIG (WCM Portlet) created in UCM to be retrieved in webcenter spaces.
My understanding after reading some articles is the only way i can communicate is through WSRP (CIS and CPS), if that is the case can u suggest what is the difference between them and which one is best one for a Intranet Application. Please also provide the example for the portlet and the steps to install them locally.
i not asking to give all the answers at a time. Just share bit by bit even if u have some knowledge.
Thanks,
Pradeep.
I am a Newbie!!!

Hey Pradeep,
You have lots of options for retrieving content from UCM in WebCenter besides CIS and by extension CPS. The best article on the subject can be found here (if you haven't already read it): http://blogs.oracle.com/fusionecm/2010/04/oracle_ucm_integration_with_we.html
To more directly answer your questions the difference between CIS and CPS is that CIS is the lower level API that actually does the communication with UCM. It serializes your request across the socket and handles the response data that comes back packaging it up as easy to use objects. CPS leverages CIS as its backend to allow the portlets to communicate with UCM.
For an intranet application you have lots of options. For document management I would recommend a combination of the Document Library taskflow along with a couple of the CPS portlets (my workflow assignments, etc). To retrieve content to display as part of an intranet "site" I would leverage the Content Presenter taskflow.
If the content to be retrieved is Site Studio 10gr4 assets I would instead recommend that you roll your own simple content portlets. That is what we ended up doing at Fishbowl and have reused them to great affect implementing several intranet portals for different customers in a very short amount of time. More info here: http://www.fishbowlsolutions.com/StellentSolutions/OracleUCMStellentConsultingServices/Categories/OracleUCMStellentPortalTechnologies/index.htm
Hope that helps,
Andy Weaver - Senior Software Consultant
Fishbowl Solutions < http://www.fishbowlsolutions.com?WT.mc_id=L_Oracle_Consulting_amw_OTN_WCF >

DataGuard on Oracle 9i and Oracle 11g

Hi Guys,
Is it possible to configure DataGuard between an Oracle 9i primary database and an 11g standby?
Thanks for the help.
Carlos

See this MAA paper - http://www.oracle.com/technetwork/database/features/availability/maa-wp-10gr2-rollingupgradebestprac-1-132006.pdf which explains a rolling upgrade using a Data Guard standby. The caveat is that you will have to create a 10.2.0.4 physical standby on the new hardware and convert it to a Logical Standby before upgrading it to 11.2. So you will have to have both homes on the new hardware. So your database has to be able to support a Logical standby.
Also, depending on the hardware change the combination has to be a supported one as detailed in the MOS note " Data Guard Support for Heterogeneous Primary and Physical Standbys in Same Data Guard Configuration" [ID 413484.1]
Going from a single instance to a RAC is no problem.
Thanks.
Larry

Can i start oracle forms and reports 11g services in linux with opmnctl ?

Hi:
I am so confused with weblogic and forms 11g that i don't know nothing at all looll :)
Someone told me that to start oracle forms i need to this
[oracle@biz ~]$./startManagedWebLogic.sh WLS_FORMS
This scripts asks for a password and that's annoying... and it just stays waiting there.. i mean does not stay running in background... So if i finish my ssh session it will shutdown...
Today at oracle support they told me that i still can start forms with OPMN using opmnctl as we use to do in 10g... Is this possible? Does anyone here have a startup script for forms and reports 11g under linux? How do you guys start forms and reports?
Regards
Ricardo

Hi Ricardo,
Someone told me that to start oracle forms i need to this
[oracle@biz ~]$./startManagedWebLogic.sh WLS_FORMS
This scripts asks for a password and that's annoying... and it just stays waiting there.. i mean does not stay running in background... So if i finish my ssh session it will shutdown...After starting WLS_FORMS, you can very well send it to background.
Press Ctrl+Z and then type bg it will move it to background
>
Today at oracle support they told me that i still can start forms with OPMN using opmnctl as we use to do in 10g... Is this possible? Does anyone here have a startup script for forms and reports 11g under linux? How do you guys start forms and reports?
with just opmnctl we cant run Forms I believe, we need to have WLS_FORMS also running ..
Forms requires ohs or wc to be up and running along with WLS_FORMS , thats is what is my understanding ..

Terminology differences between MSSQL 2005/2008 and Oracle 11g

I'm looking for some articles/books/webinars/blogs which discuss the terminology differences between MSSQL 2005/2008 and Oracle 11g in terms of database concepts. I have found this article http://www.sqlservercentral.com/articles/SQL+Server/67007 so far.
Thanks.

Thanks sb92075. Those returned results are almost all related to compare the features/functionalities between MSSQL and Oracle not to distinguish the terminology differences between them.

OWB 10.2 and DB 11g as source

Similar Messages

Maybe you are looking for