OWB 10g R2 Design repository creation problem

Hi All,
When i try to create OWB repository with Repository assistant i get the following error :
ORA-22905 cannot access rows from a non nested table iteam
ORA-06512 at line 17.
My environment details are as given below.
O/S : Windows 2000
Oracle: Release 9.2.0.1.0
OWB: Release 10.2.0.1.0
Any help or suggestion plz.
Thanks & Regards
Amit Gupta

Hi Jorg,
OWB installation and configuration document says
Warehouse Builder 10g Release 2 (10.2) is supported and certified for use with the
following releases of the Oracle database:
■ Oracle9i Release 2 (9.2.x) Enterprise Edition
■ Oracle Database 10g Enterprise Edition R1 (10.1.x)
■ Oracle Database 10g Standard Edition R2 (10.2.x)
■ Oracle Database 10g Enterprise Edition R2 (10.2.x)
Regds.
Amit

Similar Messages

Compatibilty of owb 10g with 11g repository

hi grus!!!
we are using owb 10.1 which repository is on database 10g(database name:teng)
source is on another database (database name:source) which is also on 10g
target is on third database (database name:dwh) also on 10g version
things was going fine.....
now we want to upgrade only teng database to 11g version..
I want to ask that should owb 10.1 will remain compatible with upgraded repository
thnks
Edited by: user13179178 on Jan 24, 2013 2:55 AM

No you can not install 10.1 in 11 g DB

Install OWB 10g (10.1) - Repository Assistant Design Repository Data TS

The 10g Install/config guide B12150-01 states in chap 2 heading 2.3 para 8
Select the tablespace for data. The tablespace for data stores the tables that Warehouse Builder creates in order to store the client's metadata. If you plan to run lineage impact analysis reports on your design metadata, do not select a tablespace that is locally managed and whose Segment Management Clause is set to AUTO. Default: USERS. (Recommendation: >50MB.)
Can anyone tell me if the phrase that begins with "do not select"... is a documentation error, or, in fact, it works without this restriction. Normally, Oracle recommends this setting. Any further info on this would be gratefully appreciated.
Thanks very much

I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex

P4's /Oracle 9i/Designer 6i Repository Creation Problems

Hi,
I am currently running Windows 2000 Professional on a new P4. I was unable to install Oracle 8.1.6 so have installed Oracle 9i and Designer 6i.
I have not been able to get a Repository built with this combination of hardware/software.
Can anyone tell me if Designer 6i will run against Oracle 9i?
If not when will Designer 9i be available for download?
Regards

I4m having a very similar problem with the same installation, but on a P2. Repository installation displays several errors (unable to grant, create indexes, etc on certain tables) and when I run designer logging with the user for which I created the repository it tells me that it is not a valid repository user.
Any insight??
tnx

OWB 10g Release 2: Repository owner installation error

I am getting the following error while creating the repository:
"Warehouse builder repository installation failed java.sql.SQLException: ORA-22905 :cannot access rows from non-nested table items."
the environment details are as follows
Below is the environment details:
O/S : Windows 2000
Oracle: Release 9.2.0.1.0
OWB: Release 10.2.0.1.0
Can anybody help with it .

Don't know if it's related to your problem, but we got that error on a complex query running on Oracle 9. The same query on Oracle 10 worked just fine.
Kind regards,
Corrado

REPOSITORY CREATION PROBLEM IN DARA INTEGRATOR 3.1

hi
THIS IS SRIDHAR
i have installed BO 3.0 ON My system after that i am installing BO Dataservices 3.1 on my system, in installation time when it is creating repository i am using BO mysql DATABASE,but it is giving problem i.e
cannot open connection to the repository.The error mesage from the underlying DBMS is<ODBC Call<SQLDriverConnect> for Data source<Business>failed:<MicrosoftODBC Driver Manager Data source name not found and no cDefault Driver specified>.Notify customer support>.(BODI-200006)
Please try to help me to resolve this problem
thank you
sridhar

Thaqnk you very much for your answer.
There are 2 types of numeric fields in my XLS and there are string fields too:
Integer and decimal fields
The problema is decimal, which in passing CSV file, sabe then as "string"
Are all fields of the Spreadsheet must be numeric?

Oracle Business Rules : File Type Rules Repository Creation Problem

Hi Gurus,
I am trying to create File Type Rules Repository(SOA Suite 10.1.3.3).
As per the documentation:user Guide
Oracle Business Rules supplies a blank file repository that does not contain a dictionary. This file repository is named "emptyFileRepository" and is located in the
$ORACLE_HOME/rules/lib directory.To setup a new file repository, copy and rename the emptyFileRepository file.
Then, provide this file name and location in the Repository Connect page
I did the same thing.I copied the emptyFileRepository and renamed the file.After giving the file location and click on the Create button it is throwing the error "Please provide a valid directory path." Please Help me to fix this.
The same kind of the question was posted on the same forum which was un answered.Please guide me to fix the problem.I googled a lot but no help found.
please route me to proper source.
Thanks in advance..
Regards,
ravi

I was able to create repository for business rules few weeks ago perhaps I was using an old version of the firefox, now I upgraded to firefox 3.5.7 and get the same error. IE 7 hangs, did you get a solution yet?
I am planning to downgrade my firefox and give it a try. Please update if you find a fix.

ODI 10g to 11g repository upgrade: problem while reusing schema

Hi,
I have successfully upgraded 10g repository to 11g using UA. To incorporate some changes in the 10g repository, we need to drop the existing 11g repository and re-upgrade the original 10g repository.
I have truncated the upgraded 11g schemas(master and work repo) in the database and copied the 10g contents into the empty schemas.
But while trying to upgrade the schemas using UA, the UA is showing that the ODI schema is already upgraded!!
It seems the UA is looking into some log of previous upgrade.
Is there any way to identify / modify the previous upgrade logs so that I can use the same schema details in UA and upgrade again.
Regards,
Saby

Hi Saby,
I think you can delete such records from SCHEMA_VERSION_REGISTRY table.
You will find this table under SYSTEM account in your 11g database.
Hope this helps.
Thanks,
Santy.

Dsigner 6i Repository Creation Problem

I have installed Designer6i on NT 4 then installed Oracle client 8.1.6 and now I am creating large repository so I have created all tablespaces, users and granted them privileges specified by Oracle Designer Installation Guide Chapter 2
Server-side installation, migration and upgrade. Now I am getting a error while installing repository "CDR-21244: This process has been aborted."
Please help me to find a solution for this.
Thanks & Regards
Shailesh
null

i think you make tablespace bigger,
it need about 200Mb size. retry.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by shailesh Saraff:
I have installed Designer6i on NT 4 then installed Oracle client 8.1.6 and now I am creating large repository so I have created all tablespaces, users and granted them privileges specified by Oracle Designer Installation Guide Chapter 2
Server-side installation, migration and upgrade. Now I am getting a error while installing repository "CDR-21244: This process has been aborted."
Please help me to find a solution for this.
Thanks & Regards
Shailesh
<HR></BLOCKQUOTE>
null

Repository Creation Utility Problems

I am having an unbelievable amount of grief with the Repository Creation Utility.
I have an Oracle 11g database called ORCL running on a server with a static ip address.
I cannot get past the database connection screen
Whatever I try I get
Unable to connect to the database using the provided details.
Please enter a valid hostname and port or check if the listener is up and running.
This happens weather I run rcu remotely or locally.
I know the host and port are reachable because
telnet 192.168.1.5 1521
Returns the following
Trying 192.168.1.5...
Connected to centos5 (192.168.1.5).
Escape character is '^]'.
Which means that port 1521 on 192.168.1.5 is open and there's something listening on port 1521.
This works locally and remotely
I can connect to ORCL both locally and remotely via sqlplus.
The listener is definitely up and running
lsnrctl status returns the following
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 14-AUG-2009 21:09:36
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=centos5.home)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start Date 14-AUG-2009 21:06:34
Uptime 0 days 0 hr. 3 min. 1 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/111/network/admin/listener.ora
Listener Log File /opt/oracle/diag/tnslsnr/centos5/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=centos5.home)(PORT=1521)))
Services Summary...
Service "ORCLXDB.home" has 1 instance(s).
Instance "ORCL", status READY, has 1 handler(s) for this service...
Service "orcl.home" has 1 instance(s).
Instance "ORCL", status READY, has 1 handler(s) for this service...
Service "orcl_XPT.home" has 1 instance(s).
Instance "ORCL", status READY, has 1 handler(s) for this service...
The command completed successfully
listener.ora
# listener.ora Network Configuration File: /opt/oracle/111/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = centos5.home)(PORT = 1521))
tnsnames.ora
# tnsnames.ora Network Configuration File: /opt/oracle/111/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.5)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl.home)
Here is the log entry
2009-08-14 22:01:06.311 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil
.jdbc.JDBCEngine::connect: Connecting to database: user:sys, role:SYSDBA, connectString:(description=(address=(host=192.168.1.5)(protocol=tcp)(port=1521))(connect_data=(service_name=ORCL.HOME)(server=dedicated)))
2009-08-14 22:01:27.174 ERROR rcu: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: Failed to connect database: Unable to connect to the database using the provided details.
Please enter a valid hostname and port or check if the listener is up and running. 2009-08-14 22:01:27.174 ERROR rcu: oracle.sysman.assistants.rcu.backend.validati
on.StepValidator::isConnectionStepValidated: SQLFatalErrorException: oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: Unable to connect to the database using the provided details.
Please enter a valid hostname and port or check if the listener is up and running.
I notice that the service name has been changed to uppercase even though I entered it in lowercase. I've also tried putting the name in uppercase in my tnsnames.ora. No joy.
The rcu will connect to my xe database on another machine without any problems.
Thanks
=====================================
PS
I ended up using a 10g database. The RCU worked without difficulty.
Edited by: tcavanna on Aug 21, 2009 10:32 PM

You have 2 options to fix this problem.
1. Hack the RCU user creation script, (create_user.sql). For me it was located at (/rcuHome/rcu/integration/biplatform/oracle/scripts)
2. Borrow a shotgun and kill Oracle's DB product manager. (recommended)
Regards
Naeem Akhtar Khan

One schema for OWB Design repository, runtime repository and target schema

Currently we have contents of OWB Design schema, runtime schema and target schema all combined into one schema of the same database in OWB 9.0.2 as well as OWB3i. We like to move to OWB10g in very near future. Can we keep the same structure for convenience of migration in OWB10g? Is it mandatory that OWB design repository (and components) must be separate from OWB run time repository (and components) and target schema? In other words is it possible and workable to use only one schema to contain OWB design repository, OWB run time repository and target schema in OWB10g environment with repositories to be situated on Oracle v9.2.0.1.0? Also what special considerations should be taken to create the database v9.2.0.1.0 and installation of OWB10g. What are the problems/side-effects to have all in one schema?
Also please let me know how to install Oracle Workflow server to be used along with OWB. Will OWB10g work with repository on Oracle database v9.2.0.1.0?
Your prompt advice will be very well appreciated.
Sankar

The design repo is a metadata repo that stores all the design-time objects and so forth.
It is an architectural decision that you or your team need to decide on. There are many flexible ways to architect an OWB infrastructure.
Also, your repository users will be using the design repository on the the other DB instance to do their design work...potentially less people always hitting the target database all the time.
-Greg

OWB Repository creation failed at the end with ORA-01403 & ORA-06512

I got the below error during the OWB Repository Creation on RAC Database which is newly created(11.2.0.3)
=========================================
java.lang.Exception: The workspace user installation failed on user(s):
owb_cdr:
java.lang.Exception: ORA-01403: no data found
ORA-06512: at "OWBSYS.GETROLESTARTED", line 31
ORA-06512: at line 1
=========================================
I was checking this MOM: OWB Design Client Fails to Connect to Repository With ORA-06512: at "OWBSYS.GETROLESTARTED" (Doc ID 1355764.1)
But why this is happening for first time as this is a Fresh database.
Can anyone help on this??? Any workaround for this issue?

I got the below error during the OWB Repository Creation on RAC Database which is newly created(11.2.0.3)
=========================================
java.lang.Exception: The workspace user installation failed on user(s):
owb_cdr:
java.lang.Exception: ORA-01403: no data found
ORA-06512: at "OWBSYS.GETROLESTARTED", line 31
ORA-06512: at line 1
=========================================
I was checking this MOM: OWB Design Client Fails to Connect to Repository With ORA-06512: at "OWBSYS.GETROLESTARTED" (Doc ID 1355764.1)
But why this is happening for first time as this is a Fresh database.
Can anyone help on this??? Any workaround for this issue?

Unable to login to OWB Design Repository

Hi,
While trying to login to OWB Design Repository I am getting an error message, 'SQL EXCEPTION'. Can anybody tell me the reason behind this.
Liyakat

Hi,
we need much more informations about the problem:
- Login with the OWB, per sqlplus, ...?
- Which error message? Complete text with error number!
- All related informations (version of database and OWB, errorlogs from the installation, ...)
Bye
Detlef

Migrating Designer Repository 6i to Repository 10g

My client has an Oracle Designer repository 6i Version 6.5.92.1.9 Release 4.7.(Repository 9i).
He has created an Oracle Designer repository 10g (latest version) onto another server.
He wants to migrate his Repository 6i into his new repository 10g.
Is it possible to do this, if not could you tell me more.
Thanks

He ought to be able to use the Export in the Repository Administration Utility (RAU) in 6i to export the repository and Import in the RAU in 10g to import it. Two caveats:
1. Don't try to go from a versioned repository to a non-versioned one. I think the other way around works, but I don't have mine versioned, so I don't know for sure.
2. Make absolutely sure that you are using the right EXP for the database version in which the 6i repository is stored and the right IMP for the database version in which the 10g repository is stored. Check the EXECUTE_EXP and EXECUTE_IMP registry settings on each. I've seen a lot of problems that could be avoided by using the right export and import.

OWB 10g repository assistants no longer work on 10.3.0.1 win2003

Just posted this to the database forum... oops.... now that I'm in the right spot...
I just installed Oracle 10.2.0.1 for win2k3 and OWB 10g. With 10.1.xxx the design and runtime reporitory assistants worked fine building their respective schemas, but with the new database release, they tell me that sys and system (and any other user with dba priv's) need to have dba priv's. Is this a known bug in the new release for winsrv?

From Metalink note 332371.1:
The OWB 10.1.0.2 and 10.1.0.3 versions are not certified with the 10gR2 database.
A complete 10gR2 certification will be available for the OWB 10.1.0.4 patch.
You will need to wait for the release of the 10.1.0.4 OWB patch or use and earlier version of the Database.

OWB 10g R2 Design repository creation problem

Similar Messages

Maybe you are looking for